In Posted Document How to Update Business Area Field ?
Hello peers,
I am training to update Business area in some of my line items, for example when i have posted a doc in MIRO it has not updated in my TAX a/C's. Now i want to update the same. So i tried doing the F.5D and F.5E, but it's saying
Nothing was selected
Message no. FR333
In one of the threads i read in OB65 business area has to deactivate, then post, and then activate the same to do F.5D. but it is activated before posting the documents.
What should i do now. and what should i maintain in OBXM.
Please guide me to do the same. or suggest if any other way of doing it.
Thanks in advance
Murali
Dear Murali
Maintain a Clearing A/c under transaction GA0 e.g. Business Area Clearing A/c
Make sure you have activated Business Area FS in OB65
Then run F.5D and Post through F.5E B
However by doing this you will not be able to update the Business Area but it will pass an adjustment entry
Hope it Helps
Cheers
IMK
Similar Messages
-
How to Update Business Area Field in Posted Document?
Dear All,
Pls tell me how to update Business Area in documents which are posted without entering Business Area field. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
Regards
AbhijeetHi,
I think, you need to post mannually if you have the list of documents posted with out business area.
ex:
1.Before posting of accounting entry as below, you should deactivate business area component in OB65 againest your co.code
2.Post accounting entry as below
40 123456 without business area 100
50 123456 with business area ABC 100
3. Goto T.Code: OB65 activate the business area component.
4. After posting of accounting entry like above you should run transaction F.5D and F.5E again, make sure that above entry not come again while executing F.5D.
First you can try this process in dev client, if you are comfort with this process then follow the same in quality and production.
Note: You can do this transactions in production client, only when there were no users working on the system.
all the best
Regards,
Prasad -
How to update Business area field for alread
Hi,
Recently we activated Business area financial statements in our system. After that all SD entries are showing Business area field in all SD billing-Accounting documents.
But the entries before the above change were not showing Business area since it was not activated before. But i want to update the Business area for the old documents also. so that it will be useful for me in reporting purpose.
Kindly suggest me if there is any PROGRAM to update Business area field for the old documents.
Thanks
SunilHi,
Please check the OSS Note 549182 - FAQ: Business Area Accounting
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=549182
Also OSS note 41294:-
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=41294
Regards,
Gaurav -
How to update Business place & Section Code for posted Documents
Hi,
I want to update business place and section code in existing documents, How to update business place and section code in the posted Documents. Is there any validation to check business place and section code while posting Document.
Thanks in advance
Best Regards
RajHi Raynaju,
Business place is an organizational unit and it below company code level that is primarily used for reporting taxes on sales/purchases.
For that no need to go for validation.Go to the field status and give the Business place & Section Code as required fields.
There is a option in SAP as Document change rules.There give the company code,field name and account type
Now you can change the fileds in posted document itself.
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Aneesh
Edited by: Aneesh kumarA on Jul 22, 2009 12:45 PM -
Userexits/Badis for MIGO to update business area(GSBER) in FI constitution
Hi ,
I need to update business area field (GSBER) for accounts document after Goods Recieve (GR) through MIGO and Post Goods Issue (PGI) through VL02N.
Can you please tell me the userexits/BADIS for this requirement
Thanks in advance
SaktiHi Sujit,
Thanks for reply
I tried with both BADIs. After implementing I put break point.
And goto MIGO. and filled req. fields and click on SAVE button, it should be stopped there.
But it is not stopping there.
Regards,
Sakti -
How to make Business Area as the reqd file on the Account Assignment level
How to make Business Area field as the required field on the Account Assignment level?
Thanks!
Mrudula PatelYou will have to be a little more specific about account assignment. Not sure what kind of document you are concerned about.
For G/L accounts, the account assignment (Field Statu groups) is done in customizing under SPRO -> Finacial accounting -> Document -> Line Item -> Maintain Field Status Variant. The settings for the fields to be displayed can be maintained here.
You need to know the field status variant used for the account. This can be found in transaction FS00 under the create/bank/interest tab. You can also reach the maintenance transaction for the variant by double clicking on it.
Hope that helps!
Rishi -
How to Update Business Place & Sec.Code Field in Posted Document
Dear All,
Pls suggest how to update Business Place & Section Code field in documents which are posted without entering Business Place & Section Code. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
Regards
AbhijeetHi,
Thanks for sending the replay,
I had already update the Material document through the J1INPP T. code. but it not use for update FI
Document and i want to update Business Place & Section Code in FI document.
Please suggest,
Regards
Abhijeet -
Need you help to update business area for FI Document generated at migo
HI guys
I am looking for MIGO Badi or user-exit which will help update business area which is mandatory field but when movement type 101and the account assignment tab is not there when the movement type is 101 at the time of GR so i want to update it BA in for FI Document generate in background so as to complete the GR.
ThanksHi Niraj ,
I Have check the badi but there is no structure of FI item data generated for which i can insert the BA for the line item generated
Thanks
Regards
Nilesh -
Document Splitting with Different Business Area
HI
I have a situation, where i need to create a new document type and it needs to be configured in such a way that vendor invoices and credit notes can be booked with the correct doc splitting and using different Business Areas.
I like to know if this is possible, and if yes how.
Earlier the client used to post the transactions, with different business areas, as we get only a warning message to reset the business area of the vendor.
Now that we have activated New G/L accounting, with document splitting we get the warning message,
but then the profit center will not balance, so we have an error.
The client requires that they need to post to a different business area, and the document splitting should happen.
Any suggestions on this will be great.Hi Srikanth,
In my config setting under Document Splitting i have the Zero Balance ticked for it.
My Scenario is as an Ex. I am debiting a G/L account for 1000, and giving Business Area X, with a cost Center which is assigned to Business Area X.
And Crediting a Vendor for 1000 with Business Area Y.
Will this scenario work with Document Splitting enabled, i am doubtful on this, but my client needs this.
Can you tell me if this is a possible scnerio.
If yes then how? -
How to fetch the Business area field value from MIRo into report
Hi,
I want to create a report for MIRO with payment details.
How to fetch the business area field value in to report.
What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
After that, how to find the accounting document for payment and check details.
What are the table names and field names. What we can get from PAYR table.
With regards
LakkiDear,
For Bussiness area
RKPF-GSBER -
How to update particular area in applet
I have an applet and some images in that
I am using jdk1.1.8.
How to update particular area within applet frequest while
remaining area should not be updated.
Sharmila.ugh, cross-post
http://forums.java.sun.com/thread.jsp?forum=31&thread=274855 -
Discoverer Report: How to find Business Area name from Report Name.
Hi
I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
So I know Report name but don’t know which Business Area it belongs to.
How to find Business Area Name from Report Name?
Cheers
VijayHi,
There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
select distinct doc_name, obj.obj_name folder_name, bas.ba_name
from eul_us.eul5_documents doc
, eul_us.eul5_elem_xrefs xref
, eul_us.eul5_expressions exp
, eul_us.eul5_objs obj
, eul_us.eul5_ba_obj_links bol
, eul_us.eul5_bas bas
where xref.ex_from_id = doc.doc_id
and doc.doc_name = &your_report
and xref.ex_to_id = exp.exp_id
and obj.obj_id = exp.it_obj_id
and bol.bol_obj_id = obj.obj_id
and bas.ba_id = bol.bol_ba_id
Rod West -
How to add Business area in t code S_ALR_87012082 for dynamic selection.
Hi Gurus,
I need to add Business area field in T-code S_ALR_87012082.
On choosing dynamic selection, i found that Business area is not there.
Can any one please tell me how can i add Business area field over there.
Thanks in advance.Please check following SAP notes for this.
188663 and 832997 and 310886 -
How to suppress business area feild in cost center master data urgent plzzz
how to suppress business area feild in cost center master data
Hi ,
Please check these notes
Note 606933 OKEON: Business area is no required entry field
Note 506308 OKEON: Business area financial statement prevents change
Note 422801 KS01 with template does not check business area
It might be possible to create a modification,.
Please assign points if it useful
Regards
Ravinagh Boni -
How to default Business Area at line item entry to particular GL accounts
Satish
Points assuredhi,
for getting finer records u can have user exist programme which will give you finer reports as in other standard report u might face clearing account problem. but user exit can be defined at the miner level of details u required . this is generally used fr multilocation multi business area configuration to which u can also attach SECTION CODE and get those reports in same programme by assigning business place.
user exit is more useful becuse u might be using same chart of account for all the business area and it is not convinient to have business area at entry level or assigned at company code level, instead by using user exit u can assign it to user at specific business area.
Warm Regards
Maybe you are looking for
-
I've just got my iPhone 5 and my notifications don't seem to be working correctly. Twitter, Facebook and Instagram all have their notifications turned on but do not show up in the list 9/10 times, when they do, clicking on them doesnt remove them fro
-
Very Strange error and can't find any answer anywhere in the net
I created a login form (see below). If I use the regular HTML form and form fields for the username, password and submit button I don't get any problem viewing my form But if I use cfform and cfinput form fields I get this error. Here is my cfform co
-
Material return to vendor with Nota fiscal
Hi, Could any one suggest me the process of return materials to vendor with nota fiscal document. Thanks,
-
Oracle XE: Multiple Developers for one Application
Hello, Is it possible to have more than one developer work on a single application? Couldn't find a way to do it in XE but I know I've done it in HTML DB 1.6 in the past. Cheers, Peter P.S. Sorry, I know this should go in the XE forum but it's just t
-
I have an instructional BMW video that plays on my windows xp with adobe reader 8 but when i copy it to my windows vista 64 bit with adobe reader x it does not load or play and message says adobe will close and windows will send a reply if available.