In Premiere 11, I am trying to cut out a 2 minute 'empty section'

I am doing a slideshow with video parts. Once I trimmed each of the photos and/or videos to the length I wanted, I ended up with a two minute 'empty gap' in the middle of my video. I want to cut it out so the front and end meet up. I tried to right click and then 'delete and remove gap' but it's grayed out. Alternatively, I can't seem to perform the 'cut the timeline' to cut the middle section either...nothing happens. Rendering doesn't do anything either. Can anyone give me foolproof steps cuz I'm obviously an idiot. I'm using Premiere Elements 11. Thanks!

tmoehlmann1
As we await further details from you, I would ask "Have you selected the clips on one side as a group and then just used the mouse cursor to move the group over to meet up with the other half?"
a. You can draw a rectangle around the clips to select them. Once selected the mouse cursor can be used to move them as a group as long as they remain selected in the move.
b. If the Timeline contents tend to get messed up when you are moving clips around on the Timeline, hold down the Alt Key of the computer main keyboard as you move the clips to/around the Timeline.
As Hunt suggests, it sounds like you have content on the upper tracks which often prevent the use of Delete and Close Gap.
ATR

Similar Messages

Logic Pro X with OSX Mavericks 10.9.2 Audio output cuts out 3-5 minutes into running software?

Logic Pro X with OSX 10.9.2 Audio output cuts out 3-5 minutes into running software how can I fix this?

Well, first....
Are you using any 3rd party plugins in your project?
If not then my suggestion wont be the cause......
To see which plugins you have installed (Though it's only if they are being actually used in the project that would cause your issue..) you can see them via the Audio Unit Manager found under the Logic Pro X menu bar..... Logic Pro X..... Audio Unit Manager
Also, any reason you are still using 10.9.2 instead of updating to 10.9.5?
Do you get any message when the audio cuts out?
Are you only using internal audio hardware or are you using an external Audio Interface? if so, which one?

Audio cuts out after 2 minutes

I'm having a bizzare trouble with the Audio cutting out after 2 minutes while watching TV. It comes back for exactly 2 minutes only after I change the chanel, and with every subsequent chanel change after.
I have the Audio out on the @anywhere card connected to the line-in on my Audigy 2 sound card via a stero cable (which I've changed) and I've verrified that my sound card is ok by running other devices into the computer through the line-in.
I've also had alot of trouble with the MSIPVS software crashing and causing my system to hang. I've only had the card and software for a short time and am still working out the bugs but any help will be appreciated.

Did you look at the top of THIS forum? In the Announcements and Important threads? I know there is a sticky thread about sound cutting out, it may, or may not be related to the one problem you have.

TS1424 the song i purchased cuts out with 2 minutes to go...

the song i purchase cuts out with 2 minutes to go.... how can i fix this?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Premiere Pro CC audio pops then cuts out. HELP PLEASE.

Driving me nuts...
Read all the forums. Tried reinstalling, deleting .cfs files, changing audio inputs, everything.
What is happening is that when I play back, the audio will "pop" (like feedback, loud, distorted, sounds like its hurting my speakers) then just not play anything. Levels monitor will be firing away, waveforms are there. Matching back to source monitor does nothing. Totally silent.
When I quit I hear another pop as the program exits.
The rest of the computer has sound functions (iTunes, internet, everything)
Anyone?
Macbook pro 2011 - 10.8 - 16 gigs of ram - playing off secondary internal SSD drive. 4 tracks of sync sound. Thanks.
PS - just noticed a little warning triangle at the bottom right of the program that says "Audio Dropout Detected at 1:11.442 in Adobe Player" - no idea what the hell that means.
PSS - I have a feeling its because of the video. I'm editing RED (4k) - when the video is just on one track its no problem, but as soon as I put it above another clip, then it pops and cuts out.

I dropped 8K on a new mac pro, thinking, foolishly, to just throw some computing power at it...
My friends, Adobe just hates macs.
Both my D700 GPUs are kinda useless to Premiere. nVidia won and I guess Adobe could give two sh*ts about anyone on a new mac. I was hoping to go to premiere after Apple decided to drop FCP. What's amazing, as a commercial editor in NYC, EVERYONE was either on FCP or Avid (much more FCP) so there was lots of business to pick up... but the more I talk to people, and stories like this get shared, the more people are moving over to Avid, even FCPX if you can stomach it. Such a shame because AE, PS and the rest should work so nicely together... they just couldn't make it easy for non nVidia people or mac people.
I've tried contacting them (I'm even on their customer review panel) but no one seems to be able to patch this up. I've done 2 clean installs on my new mac, because I've gotten to the point that every premiere freezes, its a restart. Unreal. Been editing for 10 years and never had problems like this... even when we started putting Avid on a mac.
Failed and quite pissed. Not for nothing Adobe, if you're listening, I've got a real mind to use every piece of my social media platform to bring this to your attention - this program has wasted so much of my time (and money, jeebus) that it's almost immoral what's been going on.

Trouble trying to cut out small sections

When I try to cut out a section, large or small, it deletes the whole section to the right of the section I choose. It never did this before. Also, I have a rather long MP3 file, over 2 hours but it won't show anything after the 2000 mark.
I've used garage band for years but never had these issues. Thanks

It's
very often necessary to cut artwork. Illustrator (unlike every other mainstream program) just can't do it, that's all. You have to resort to tediously cutting individual paths because Illustrator's Knife tool cannot cut across multiple open unfilled paths. (One of its most bizarre limitations.)
If you're lucky (or can live with some distortion of the remaining portions), you can do it with the poorly-implemented Eraser tool:
Get the Eraser tool. Start somewhere just beyond the upper-left bounds of the artwork you want to trim. Press and hold Alt. That will cause the Eraser to draw a rectangular marquee. Mousedown and drag rightward and downward, until the right side of the marquee aligns with where you want the left edge of the remaining artowrk to be. (In effect, "cover" the unwanted portions with the rectangular marquee.)
Similarly repeat that for the other three sides.
Open unfilled paths will be cut as well as filled paths. However, the shapes of some of the remaining portions may be altered somewhat.
Of course, it should go without saying to do this after having saved a copy of the entire map. Once it's gone, it's gone.
JET

Why does audio cut out 10-15 minutes into iTunes movie? Using Windows 8.1 Pro 64 bit

My audio cuts out in any completely downloaded iTunes movie (SD or HD) 10-15 minutes into watching it in iTunes how can I fix this?
I have to shut down iTunes completely and restart it again to get the audio to come back. 10-15 minutes later the audio disapears again.
I am running a Windows 8.1 Professional 64-bit on a PC, 8 GB RAM, ADM Athlon II X2 265 Processor, 3.30 GHz
Running iTunes application version 11.1.3.8
Quicktime 7.7.4 (1680.86)
I tried uninstalling and reinstalling iTunes already.
Any ideas?

Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Video Cuts out After 20 Minutes

With my iPod video coming soon I am preparing movies to put onto my iPod. I convert DVDs into MPEG1s, then MPEG1s into uncompressed AVIs because QT can take audio and video from AVIs. My final uncompressed AVI is perfect, audio and video all the way through. Now, when I convert this AVI to an iPod format movie (320x240), a QT movie (.mov), or a MPEG4 (I have tried all three), it seems to work fine, no errors or anything. Then when I play the result, the audio goes all the way through, but the video cuts out to a white screen after 20 minutes. Is this fixable or do I have to wait for a QT update? By the way, the movie is 90-100 minutes long.

You are converting a DVD (MPEG-2 format) to MPEG-1 format and then to .avi file. This new (now compressed twice) file is compressed again (conversion to .mov).
Too many steps and way too much re-compression.
You should search for some software that will export from MPEG-2 to the iPod settings.
The white screen issue is probably caused by broken time codes (the MPEG-1 file, I suspect).
I've seen new software releases designed for iPod video export (both Mac and Windows versions). Maybe you should try a few of them.
Can the iPod battery hold out long enough to play 100 minutes of video?

Video problem - sound cuts out after 29 minutes.

I have put some TV shows from my computer onto my iPod but after 29 minutes, the sound cuts out and I am left with just the video. If I skip past 29 minutes, the screen goes black for a second, then returns to the previous menu.
My iPod is a 30GB 5G with iPod Software version 1.2.
I used iTunes 7 and tried 7.0.1 to copy the videos to my iPod. They play fine on the computer.
I have put films (1hr+) on before and they have worked fine, however that was with iPod software 1.1 and an older version of iTunes.
Any ideas?

Well sounds like the TV shows had transferred errors. Have you tried reloading them?
Also make sure the Frame rate, and Audio rate are working ok. You will know if they are not, if voice and video are off even slightly. Also how long are the TV shows? 30 Min? If they are, then it may just be a corruption or skipped of the last min or few seconds, because the video is ending. That would explain the black screen. It does that after the video finished and it goes back to the last screen. So it just may have not copied the last few sec of the video, that happens sometimes. Try reloading it again!
Also if that does not work, try resetting the Ipod. I would hate for you to “Restore” your Ipod for just 30-60 sec of lost sound of a TV show. Especially if everything else if working well.
Best of luck. Don’t forget, if this post helped you, click Solved or Helped at the top of the post. It makes our rank better!
Have a great day, and hope you fix your problem.
P.s. it could just be that your Tv shows End at 29 min-ish as well IDK?
God life

Can anyone tell me if there is a solution to this.....since downloading the new 07 software on my iPad, Skype talks are always cutting out after a minute or so.

Since downloading the new software 07 onto my iPad, I have endless trouble with my Skype talks always cutting out after every few minutes or seconds of talking. Can anyone tell me if there is a solution to this? Many thanks

You are adventurous. Nothing wrong with your Mac. If I were you I would leave terminal and Console alone until you get familiar with your Mac. Even then unless you absolutely know what you are doing in Terminal you could end up with an expensive door stop. Play around with iPhoto, Safari Address Book, iCal. Read some Mac books from your local bookstore. Hang out at the forums. in short just have fun.

I am trying to cut out an image with the pen tool and when i make a selection it selects the whole image and not the cut out. How do i stop this?

The selection basically inverts when I dont want it to do that! Any help would be great, its becoming very annoying.
Thanks

It sounds like you need to change your path operations?
Is it showing:
change to:

I'm trying to cut out the introductory part of a song that I imported from ITunes and not start the song from the beginning

Has anyone ever imported a song from Itunes and deleted the first part of the song so that it starts at a certain location?

Sure. Drag the song into your Project from the Music Browser and drop it on the clip where you want it to start. It should appear as a ribbon underneath your video clips. You can then drag the left edge if the clip to the right, until it starts where you want it to.
This video Tutorial may help.
http://www.apple.com/findouthow/movies/imovie08.html#audioclips
Another way. Once you drag in the music clip, click the gear icon on the clip to open the clip trimmer. You can change where the clip starts there.
See iMovie Help here for all the details.
http://help.apple.com/imovie/#mov3b0fa95d

Streaming movies cut out after 10 minutes

Hi,
I'm finding that when I try and stream a movie from my iTunes (iMac 21.5") to my ATV2 (using latest Airport Express connected to a Virgin Media Modem), the movie freezes after around 10 minutes. When I check the wireless network, the whole thing has gone down. I have to switch off Airport and then turn it back on again. This can happen 8 times during a 2 hour movie.
I have tried resetting and restoring the Apple TV.
I am also finding that while I am trying to watch a streamed movie, the rest of the wifi network cannot be used for internet access.
I have tried changing the channel of the WiFi in case I was picking up interference from neighbours but this made no difference.
If anyone has any ideas I'd really appreciate it as the ATV is currently just a black box that sits under my TV gathering dust.

I actually never thought of that.. Thanks you're probably right here's why:
Here in New Zealand, our home ISP has an option for a signal booster for the home. I manage to get full signal and can teether unlimited at 550kbs/s out of my iPhone, as oppose to our faster home Internet but at a 40gb/month cap... Hence why I'm tempted to use the most out of my iPhone and half a megabyte speeds is probably the cause of overheating.
Thanks for the reply!

Bt Broadband keeps on cutting out every few minute...

Hey Guys,
Just wondering if anybody could help me and understand this event log? I'm using bt's newest router and just last night(without changing any settings or adding new devices) my broadband would drop out every 5mins or so! it seems to configure itself after a minute then reconnect! It happens when connected wirelessly and by cable. Im posting the event log to see if anyone can make sense of it!
Any help much much appreciated!!!
  23:49:16,04 Nov.
PPP LCP Send Configuration ACK
  23:49:16,04 Nov.
PPP LCP Receive Configuration Request
  23:49:15,04 Nov.
PPP LCP Send Configuration Request
  23:49:12,04 Nov.
WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
  23:49:12,04 Nov.
DSL Link Up: Down Rate=3264Kbps, Up Rate=448Kbps; SNR Margin Down=12.4dB, Up=19.0dB;
  23:49:03,04 Nov.
WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
  23:49:02,04 Nov.
PPP LCP Send Termination Request
  23:49:00,04 Nov.
WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
  23:49:00,04 Nov.
DSL Link Down:the duration is 510 seconds
  23:45:18,04 Nov.
CWMPOAP ID is not correct.
  23:45:18,04 Nov.
CWMP:Recv fault packets from HDM.
  23:45:18,04 Nov.
CWMP:session completed successfully
  23:45:16,04 Nov.
CWMP:session start now, server:https://pbthdm.bt.mo, Event code:, 4 VALUE CHANGE
  23:42:59,04 Nov.
CWMPOAP ID is not correct.
  23:42:59,04 Nov.
CWMP:Recv fault packets from HDM.
  23:42:58,04 Nov.
CWMP:session completed successfully
  23:42:56,04 Nov.
CWMP:session start now, server:https://pbthdm.bt.mo, Event code:, 4 VALUE CHANGE
  23:42:03,04 Nov.
LAN3 up
  23:41:46,04 Nov.
CWMPOAP ID is not correct.
  23:41:46,04 Nov.
CWMP:Recv fault packets from HDM.
  23:41:46,04 Nov.
CWMP:session completed successfully
  23:41:44,04 Nov.
CWMP:session start now, server:https://pbthdm.bt.mo, Event code:, 4 VALUE CHANGE
  23:41:12,04 Nov.
CWMPOAP ID is not correct.
  23:41:12,04 Nov.
CWMP:Recv fault packets from HDM.
  23:41:11,04 Nov.
CWMP:session completed successfully
  23:41:10,04 Nov.
CWMP:session start now, server:https://pbthdm.bt.mo, Event code:, 4 VALUE CHANGE
  23:40:51,04 Nov.
CWMPOAP ID is not correct.
  23:40:50,04 Nov.
CWMP:Recv fault packets from HDM.
  23:40:50,04 Nov.
CWMP:session completed successfully
  23:40:48,04 Nov.
CWMP:session start now, server:https://pbthdm.bt.mo, Event code:, 4 VALUE CHANGE
  23:40:40,04 Nov.
CWMPOAP ID is not correct.
  23:40:40,04 Nov.
CWMP:Recv fault packets from HDM.
  23:40:40,04 Nov.
CWMP:session completed successfully
  23:40:38,04 Nov.
CWMP:session start now, server:https://pbthdm.bt.mo, Event code:, 4 VALUE CHANGE
  23:40:36,04 Nov.
WAN Auto-sensing detected port DSL
  23:40:36,04 Nov.
WAN Auto-sensing last connection port: DSL
  23:40:34,04 Nov.
WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
  23:40:34,04 Nov.
PPP IPCP Receive Configuration ACK
  23:40:34,04 Nov.
PPP IPCP Send Configuration Request
  23:40:34,04 Nov.
PPP IPCP Receive Configuration Reject
  23:40:34,04 Nov.
PPP IPCP Receive Configuration NAK
  23:40:34,04 Nov.
PPP IPCP Send Configuration Request

Broadband stats are:
Speedtest is:
FAQ
Test1 comprises of two tests
1. Best Effort Test:  -provides background information.
Download Speed
2103 Kbps
0 Kbps
4000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 2103 Kbps
For your connection, the acceptable range of speeds is 1200-4000 Kbps.
Additional Information:
Your DSL Connection Rate :3264 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2879 Kbps
2. Upstream Test:  -provides background information.
Upload Speed
286 Kbps
0 Kbps
448 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 286 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 448 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 01:01:29
Downstream:
3,264 Kbps
Upstream:
448 Kbps
  ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
12.1 dB / 19.0 dB
Line attenuation (Down/Up):
53.0 dB / 31.5 dB
Output power (Down/Up):
18.8 dBm / 12.3 dBm
FEC Events (Down/Up):
167 / 0
CRC Events (Down/Up):
5 / 0

Onboard Sound Cuts out after a while - anyone know why?

Hiya peeps,
Ever since I bought my MSI motherboard, the onboard sound has been a bit dodgy. Whenever I play games like UT2004 or halflife, the sound cuts out after several minutes of play. It only comes back again if I restart the game, but then after a few minutes it will cut out again. Anyone else experienced this?
I have tried altering all the game settings from safe mode sound drivers to full EAX H/W accelerated but this has made no difference to the stability of the audio. I have been updating all the drivers to my system as and when MSI live update picks them up, os I am up to date on that front. I have a lot of decent kit (PSU etc) in my machine and its not overclocked in any way at all. Also I have the most up to date direct x too.
My system spec is below, please help chaps.
PS im trying here as MSI have not responded to any of my email queries about this problem.
Regards,
MrG.
CPU: P4 2.8E Prescott 800FSB (200MHz * 14.0) HT Enabled
MEM: 1GB Corsair XMS3200C2PT Platinum CAS2
MTB: MSI 865PE Neo2-PFISR (MS-6728) Bios V3.7
GFX: GexCube Radeon 9800 Pro
HDD: Hitachi Deskstar 7K250 120GB ATA-100 8MB
PSU: Enermax EG465AX-VE(G)(FMA) 460W
OS : WinXP SP1, all drivers up-to-date and Liveupdate up-to-date
Nothing is overclocked and all BIOS setitngs are set to the defaults.

I had the same problem, this is how i fixed it:
Uninstall everything relating to the drivers for your sound from both the control panel AND the device manager, do not let windows PnP install ANY drivers. Then manually install the latest drivers, not from live update, but from MSI's website, then run the installer package. Make sure you reboot at every step, since that's what I did, and no more sound cut-out.
See, we have many of the same specs in our computers, this is probably the same issue I had.

In Premiere 11, I am trying to cut out a 2 minute 'empty section'

Similar Messages

Maybe you are looking for