In Premiere Pro 2014 imported audio skips and is out of sync - version 7.2.2 was ok

I have been importing AVCHD Content in to Premiere Pro 7.2.2 with no issues. Now that I have upgraded to Premiere Pro 2014, importing that same AVCHD footage causes the audio to skip and finish before the video causing it to be out of sync. I compared preferences between the 2 versions and all settings seem to be the same. This is something clearly different between these two versions of Premiere Pro. Anyone else have this issue?

Here is some additional info:
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
Revision ID: 0x0000
ROM Revision: 113-C0170F-175
EFI Driver Version: 01.00.560
Displays:
iMac:
Display Type: LCD
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort

Similar Messages

Premiere Pro CS6 importing/ audio and video problems

I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

HELP! Imported audio files now randomly out of sync!

I cut a short film a while ago. It was shot on HDV. I used some in-camera audio (from the HDV tapes) but also, some audio files from my sound mixer, which I originally imported as WAV files and manually sunc them up. Everything was fine.
Later, I outgrew the original media drive and upgraded, copying all of my media to the new drive. When I did that, I noticed that all of the camera audio was fine, but all of the audio that had been imported from those WAV files was randomly out of sync -- meaning that some files were 1 sec early, some 16 frames late, etc.
When I broke the link and re-linked to the original drive, all was fine again. Now, however, doing that makes those original files out of sync also.
When I relink these files now, FCP ALWAYS finds a discrepency with them: They supposedly have a different "Media Start and End" and "Rate." Apparently, that's why they're being offset, but they're the EXACT same files that I started with, so what's up?!??
Any ideas would be greatly appreciated. They represent A LOT of work to fix one by one.

This is what it says under FORMAT: 24-bit Integer (Little Endian), Mono, 48.000 kHz
Incidentally, this is EXACTLY the same for both the files on the original drive (that play perfectly in sync) and the copied ones that are out of sync.
I realize that FCP likes AIFFs, but WAVs is what my sound guy gave me.
Any other ideas?
Message was edited by: Lloyd Dexter

Audio Tracks and Video Out of Sync!!

I am having a problem with not only the video and audio being out of sync, but the audio tracks, left and right, are out of sync with each other. I know it isn't the camera or tape because I watch the footage while it's capturing and it is fine, plus it happens all the time, with different tapes and different cameras. What would cause this and how do I fix it? Also, how do I set my preferences to automatically start the camera when I click capture? I have it set on my iMac but I can't find it on my G5.

I am having a problem with not only the video and audio being out of sync, but the audio tracks, left and right, are out of sync with each other. I know it isn't the camera or tape because I watch the footage while it's capturing and it is fine, plus it happens all the time, with different tapes and different cameras. What would cause this and how do I fix it? Also, how do I set my preferences to automatically start the camera when I click capture? I have it set on my iMac but I can't find it on my G5.

Imported dvd into premiere pro 2014 as a linked file with audio and video but audio from previous editing file is playing with video

I am editing in premiere pro 2014 on a windows 8.1 system with 12 mega byes of ram. I imported a dvd into premiere from a .f4v that was
burned using freemakevideo converter.
I imported the DVD into premiere and the audio that is playing is from an previous project I edited with the program, as oppose
to, the audio that is linked with the video imported.
Do you know why this is? I cleaned my media cache and I rebooted my machine.
Please help

Without knowing the specs of your videos it is hard to say. I'm also running a Mac and am having no such issues.
My first thought is that you have something from a 3rd party installed that is causing conflicts. If all else fails try transcoding your mp4 files to a frame based codec using the Adobe Media Encoder. Pick one of the Apple production codecs or Jpeg compressed QuickTime.
Are you running a ram preview? Did you render your Premiere timeline? Are you new to AE?

Premiere Pro 2014 Cross Fades don't save and or load and saved audio drops???

For no apparent reason premiere pro 2014 will not save cross fades... it saves them but wont load them
Audio is dropping out ....
I was given a project to make some changes to and every time I open it I need to recreate the cross fades and then export it and then check it and then recreate the cross fades that didn't export and then hope for the best!!
this is so unstable and there seems to be no apparent reason
any help would be magnificent

Hi Vince,
vince_email wrote:
...The only things that changed were an update to Yosemite, I started using Time Machine to make regular backups...
Please check this blog post. Updating from Time Machine can cause this issue: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
Thanks,
Kevin

My Program and Source Monitor Stopped Working: Premiere Pro 2014

Heres how it all started.
I got an error which said I didn't have the correct video modules, then came the ugly face of BSOD. I restarted, tried again, same result. I did a system restore with Windows, reinstalled Windows 8.1, reinstalled all of my plugins and Adobe CC programs, and when I opened my project was completely scrambled. Uninstalled all Adobe software, ran CC Cleaner, reinstalled. This got the audio in my videos to work but now there's only a white screen on my my Source and Program monitor when I try to play my timeline. I did another system restore on Windows, went to my laptop manufacturers website and updated my bios, graphics driver, and processor. Also reinstalled windows updates, and my Adobe software, I've tried CC Cleaner before each install, tried going back to the previous version of Premiere and still nothing in my source or Program monitors.
MSI GE70
Intel Core i7 4700MQ Processor
NVidia GeForce GTX 765M / 2GB GDDE5
12 GB Memory
using .MTS footage from a Canon C100
Premiere Pro 2014.2
Things I've tried from other threads:
-I read that there might be a problem with the .MTS files so I've also tried starting a new project with .MOV files and h.264 and still nothing.
-I tried going into the project settings and choose "render with software", still nothing.
-I tried emptying media cache files under C://users/my user/app data/roaming/Adobe/common.....you guessed it, NOTHING.
-I tried using my daughters "Frozen" magic wand we bought her for Christmas to fix the problem with icy magic like Elsa did in the movie.......surprisingly, still nothing.
Any other ideas out there?

Hi,
Do you have Dual Graphics Adapters? You can check that under Device Manager > Display Adapters.
If yes, Disable Intel Graphics and see if it helps.
Have you tried to Trash the Preferences?
Rename the 8.0 folder to trash the preferences: <drive>\Users\<username>\AppData\Roaming\Adobe\Adobe Premiere Pro\
Thanks,
Rameez

Premiere pro 2014 cross fades don't get saved or load as saved audio drops???

For no apparent reason premiere pro 2014 will not save cross fades... it saves them but wont load them
Audio is dropping out ....
I was given a project to make some changes to and every time I open it I need to recreate the cross fades and then export it and then check it and then recreate the cross fades that didn't export and then hope for the best!!
this is so unstable and there seems to be no apparent reason
any help would be magnificent

Hi Vince,
vince_email wrote:
...The only things that changed were an update to Yosemite, I started using Time Machine to make regular backups...
Please check this blog post. Updating from Time Machine can cause this issue: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
Thanks,
Kevin

Failure to import fcp7 project's xml into Premiere Pro 2014. Details below. Why is it crashing? Any thoughts?

Here are the details of my problem:
Premiere Pro 2014 (up to date)
Mac book Pro OSX Yosemite 10.10.1 with 2.8 GHz Intel Core i7 processor
Source footage includes a variation of codecs as follows: H.264 in a .mov container, 1920 x 1080 Apple Pro Res 422, Linear PCM
There are no error messages, the import into Premiere Pro 2014 begins normally but the "progress bar" never starts and then after about 10 seconds a blank white box appears followed by the pinwheel.
When the problem occurred I was trying to import a fcp7 project's xml file into Premiere Pro.
I emailed Adobe Support Tech the fcp7 xml file and it crashed his computer, however, I was able to successfully import one clip from fcp7 (an Apple ProRes 422, Linear PCM, duration 1 minute) from the fcp 7 project into Premiere Pro, but not the whole project or the bare essentials (the cut itself).
I am not running other software
Do you have any third-party effects or codecs installed? Not that I know of...
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU). ??????
I am using Mercury Playback Engine GPU Acceleration
The problem only happen when I try to import the FCP7 xml project file into Premiere Pro

Hi Lynn,
Have you inspected the XML file for any anomalies? That might be a way to see if any third party effects were used.
Thanks,
Kevin

Premiere Pro 2014 is crashing and freezing and I have to use force quit to get it to shut down.

Premiere Pro 2014 is crashing every day. i am running Premiere Pro 2014 on a 2013 imac with 3.4 GHz Intel Core i5 with 16 GB RAM. Playback on premiere continually freezes and the program crashes. Or the playback will start to freeze and then I save and close the project file/program, but the program will not close and I have to force quit. This is extremely frustrating. Premiere Pro CC was super stable and I rarely if ever had a problem. I have changed my permissions to give myself read/write. I have created a new project file in 2014 and then imported all my sequences from my updated project file but none of these strategies have worked. I am considering creating a new project file and going back to working solely in CC because I am on a deadline and troubleshooting this issue is taking up so much time.

I have had to force quit PP CC four times today. The fourth was when it crashed while trying to reopen it. I have had exactly the same problems as described above. I have no solutions to offer. I will go through a week of constant Premiere Pro bugs and poor performance then experience a period that seems too good to be true only to end up having a day like today. I can't believe that they call this a professional editing suite. It just wastes so much of my time pissing around trying to fix things and managing all the extra render and preview files it makes each time I have to save a new copy of a project which usually results in renaming it. It gets confusing after a while. Really not happy with this and have begun to learn Avid so as soon as this project is done, PP will be history.

Premiere Pro 2.0 compatable video and audio formats

I am working on a project that uses old vintage newreel clips and such from the 50's and 60's, they are available for download in several different formats.
I have downloaded many of them but when i import them into my timeline, there is no audio for these clips. They work when i just play them out of premiere. What are the supported formats for premiere pro 2 both in video and audio?
I have made several movies but haven't come upon this issue before.

Welcome to the forums.
The following links will help you:
FAQ: How do I import xyz format files?
FAQ:How do I convert my files?
FAQ:Why is there no audio in my imported MPEG file?
Cheers
Eddie

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?

Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?

And When i double click the video files in the editing program, another window pops up named: Source:Sequence 01. But the window Program:Sequence 01 Has a Red screen on it! But the file clearly works so i have no idea what to do.

What is the best PC laptop to use with Premiere Pro 2014?

I'm excited that I get to buy a NEW LAPTOP!!!
I'm editing a documentary with tons of footage. I'll use external SSD drive for files.
What is the best PC laptop to get for editing movies on Premiere Pro 2014?
I can spend up to $1500
Thanks SO MUCH for your help!!!!

premiere will run fine with the 7200rpm hdd. while editing, if your hdd/ssd isn't fast enough it will stutter and skip as it cant feed the data fast enough to premiere. thats with high bitrate footage, if you are using low bitrate footage the 7200rpm might work ok to hold your footage too. odds are that external samsung ssd will be fast enough to hold the media, project cache and any preview files. you shouldn't need another external hdd for export/render.
the ssd for internal will let windows boot faster and let programs open and close faster. once windows is loaded and programs are opened, they load into ram. there is little to be gained after that for ssd/hdd speeds while using most programs.

Pp cc 2014 import audio prob

help please! tried to import clip into pp cc2014 and the audio is out of sync will video file its never done this before? file on the card is all good.
shot on canon c100 avchd. could this be a update problem? using a mac

Are you doing as it describes in the links below?
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
-http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

In Premiere Pro 2014 imported audio skips and is out of sync - version 7.2.2 was ok

Similar Messages

Maybe you are looking for