In Preview, the simple line annotation seems to have been removed. When I select the tool, there is an arrow annotation instead of the simple line earlier.
The simple line annotation in the Preview Application seems to have been replaced rather oddly by an arrow. I wish to use the simple line in a PDF document without an arrow at the end. Its a very important annotation that I use very frequently.
Choose line width at the top of this pull-down in the Annotate tools. Choose simple lines, right, left or two-way arrows at the bottom of the pull-down...
Similar Messages
-
How do I upgrade from Logic 7 to Logic Studio? It seems to have been removed from the Online Store.
I have been told by the apple store that it is no longer available for purchase, and that I should search the app store, but I can't find it. Any ideas on where I can find the upgrade pack still? Thanks.
It would appear that the way to Upgrade is to Purchase Logic 9 from the Mac Apps Store...
-
Has anyone found a way of hyperlinking Pages 5.0 docs on Maverick? Made extensive use of hyperlinking many Pages docs together. On opening my Pages docs in Pages 5.0, get advisory dialogue box stating 'Spotlight data has been removed' and the doc opens fine, but the 'upgrade' file transformation has apparently removed a whole lot more. Will have to migrate all my data to another app if this is no longer possible. Painful. Time consuming. Hoping there is a solution/patch available shortly.
And there are those who don't like me repeating the same message over and over again in this forum!
Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
Peter -
Can anybody advise me how I can disable "Connection Logging which has set itself up in Mail, when the settings were changed for internet connection I am running OSX mavericks 10.9.3 thanks very much
I certainaly did not turn connection logging on but the effect was disastrous. Mail would not respond as long as there was a slow connection. I figured this out through turning off all network connections and watching Mail spring back to life and let me search my messages.
Normally if a connection is slow to respond, mail just lets the slow connection do it's thing while everything else operates largely unhindered.With connection logging turned on, your Mail app is a slave to the slowest connection to a mail server (I have 8 total)
I had to crash mail over and over again to do a simple search of my messages until I happen to notice that this connection logging was turned on. I found this thread, turned it off, now Mail works as well as it ever has (very buggy but usable)
How dare Apple do that behind my back!? After all the problems there are Mail, they have the gall to turn on logging and reduce Mail to unusable?
I also deleted all the logs for a good house keeping seal of approvable. They were here:
Some day Apple might consider hiring a test team... instead of relying on all the users. -
How do I report an apparent virus to Firefox? I seem to have been infected when downloading Firefox
I appear to have downloaded the JS/Agent.A and JS/Agent.B viruses when I downloaded Firefox. Is this possible? The evidence for this is that the virus arrived at the same time as the download, and appeared in the C:/Program files/Mozilla Firefox/chrome directory. It appears to have used Firefox to access some log-in details and reported them to a third party. I could find no way to report this directly to Firefox via the website, and would like to do so.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.5; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Paul,
A/V programs look for patterns in code that look suspicious to the A/V application, but the A/V program will not flag files that are known to contain that pattern if the internal A/V detection files know those specific files are part of a valid application. We usually see postings about problems like you are having immediately after a Firefox update, because the users A/V program vendor was slow adding the new Firefox files to their database and slow in sending those updates to their users. We have seen repeated problems from a few A/V vendors over the years, usually the suspected problem goes away when the user forces an update manually thru the offending A/V program.
I can only guess that your A/V program flagged something in Firefox because it was a newly installed program, and it didn't expect it to be installed.
As long as you are downloading Firefox from a Mozilla download mirror website, the chances are slim to none that you will get a true virus as a result of downloading and installing Firefox. Which is why you should only download Firefox from an official Mozilla web page, like this:
http://www.mozilla.com/en-US/firefox/firefox.html
Sorry, you had that problem. -
What does it mean when a purchase is billed to "store credit"? Is it one of those iTunes gift vouchers? Only reason I ask is because I downloaded Ken Follit's FREE book from the 12 days of Christmas app and seem to have been charged 10.99 for it!?
Thank you so much for the link. Am persevering thru it, will get there eventually, as I had already tried to press the Report a Problem link on the invoice, but it won' t connect to iTunes store on my iPad, it keeps saying can't connect. Infuriating. But thank you, you found me a link I would have taken ages to find.
-
First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?
Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?If you still have your serial number for Acrobat Pro there is a link to the installer here: Download Acrobat products | 9, 8
-
In 10.8, the file info window’s “Kind:” read “Application”/etc. for 64-bit items and “Application (32-bit)”/etc. for 32-bit items.
The “(32-bit)” part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?1. Launch System Information into its 'report' mode. (A quick way to do this is by holding down the option key while clicking on the Apple menu item, which causes "About this Mac" to change to that.)
2. From the list on the left, under "Software" click on "Applications." (If you don't see the Applications item, click on "Show more information" from the "File" menu.)
3. Wait a minute or so for the report to finish.
4. The last column in the report is "64-bit (Intel)." (You may need to scroll the window to the right to see it.) Click on that heading to sort the list alphabetically. Anything with a "no" is 32 bit. -
What happened to the 'more' button at the bottom of the apps store screen? It seems to have been replaced by the 'updates' button, and I want the 'more' button back.
When using the back button I keep getting the drop down box when I do not want it. For me the hold down time before the box opens is far too short.
I would be quite happy to always right click to get the drop down. Is there any way to disable this feature when using the left button or for making the delay longer? -
Just upgraded my old iWeb app to version 3.0.4 from an iLife 11 disk. I like some of the newer features but it seems to have one glitch: when I upload the pages to my ftp server, the automatic navigation bar at the top of the page disappears. Any ideas? Thanks.
Looks like a couple scripts are missing:
If you republish the entire site iWeb should recreate these for you...
I don't use the built-in navigation. I usually just create my own:
http://jeffnitschke.com/Home.html -
My safari browser seems to have been taken over by a malicious program called only-search. Does any one know how to uninstall this program from safari? I am running osX 10.10.
There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Safari and Firefox seem to have been hijacked
Safari and Firefox seem to have been hijacked. When I type hotmail it takes me to some netgear wn2500rp genie. Help!
Hi,
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem.
http://support.apple.com/kb/TS1594
Make sure Safari is running in 32-bit mode. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
If Safari still crashes, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
Carolyn -
It seems to have been replaced by a "mute on/off" button instead. How do I fix this?
I'm using an iPod 3G running 5.1.1.I have the same issue as the person in this thread. https://discussions.apple.com/message/15245430#1524543
I have also fixed my issue thanks to that thread, thank you. -
Upgraded to Elements 11 from 9. Form windows 7 to MacOS. Events and dates seem to have been lost
After importing catalog, events and dates seem to have been lost. People tags imported OK. Thoughts?
Same issue. I have multiple ATV2 and ATV3 - none could access home sharing after updating to 11.1.
I've learned my lesson from previous iTunes updates, so I always have a backup of my library. So I uninstalled 11.1 and deleted every iTunes folder I could find on my drive (important because I didn't do this the first time, and home sharing did not work). Then I restored my library from backup (iTunes folder), and installed iTunes 11.0.5. Home sharing works, with:
ATV3 with updates
ATV2 with updates
ATV3 without updates
ATV2 without updates (not tested yet)
Yea, so something is wrong with iTunes 11.1 with home sharing. Hopefully Apple will address. If not, hopefully they will support 11.1 for a very long time. -
My 2nd Gen Apple TV seems to have just stopped working with Youtube. Is there a particular reason this has happened ? All of the other services work correctly.
Apple already have a position on such matters. If you have a problem with one particular service and not others, contact the provider.
Contact Apple TV content providers - Apple Support
However, 3 similar reports, do not a problem make. Perhaps there is a problem, perhaps there isn't, but it really doesn't seem to affect many people if there is, believe me when there is a problem it's quite obvious from the additional traffic it causes in these communities. It's also not exactly clear that you are all seeing exactly the same thing.
Maybe you are looking for
-
Hi everybod, i got a small Problem with the HIDE command in ABAB Objects. I got a Method called write_on_screen( ). in this method i got code like this: DATA: test TYPE c. test = 'Hello'. WRITE: /0 sym_minus_folder AS SYMBOL HOTSPOT. WRITE: /5 '
-
Won't Open--read prior solutions, still won't work (MAC)
I switched to a MAC so I wouldn't have these problems. Up until yesterday, it would open in Safe Boot but not on regular restart. I've tried everything mentioned online and in forums...updates, permission repairs, resintall, new user w/ privileges, e
-
How do I include Motion files in FCP "media manager" exports?
All files with a .mtn do not transfer correctly when I use media manager to duplicate a project: I get the red-dotted frame and even when I try to reconnect the frame, once rendered, remains black. I was wondering if there is a way to export Motion f
-
MM Pricing: Account and Accrual Keys
Hi ! In a calculation schema we can assign Account Keys and Accrual Keys to condition types. I am noticing that if I assign a Accrual Key, the Account Key is ignored. Is this a correct observation? If I assign a Accrual Key do I have to leave Account
-
HEy everyone, here's my question to all of you. I im having trouble restoring my ipod. When i turn it on i get the message "Please connect to computer. Please restore with iTunes." in 4 different languages. This is fine, i eventually got it to read a