In print or print preview I only see the 1st page and can only print the 1st page

to my printer or to and Adobe file, but with IE I see all the pages which are formed and can print them. How do I correct this in Firefox

See this: 
http://kb.mozillazine.org/Problems_printing_web_pages
Your problem might be caused by a Bug in Firefox. 
http://kb.mozillazine.org/Problems_printing_web_pages#Does_not_print_multiple_pages

Similar Messages

I can't get my printer to print to the edge of the page and can't find the right settings.

I am trying to create an A5 booklet from A4 spreads in InDesign which I have now done but for some reason when I print it is not printing to the edges of the paper. It's about 6mm short on the short edge and 3mm short along the long edge. I don't think the printer we have is full bleed but I would have expected to get a little closer than that to the edges. I have looked at document settings and zeroed all the bleed and slug options and I can't see anything else to change in the printers own settings. Does anyone please have any other idea what I might be able to change?
Many thanks

Unless a printer's feature list expressly touts "edge-to-edge" printing, it almost certainly cannot print to any of the 4 edges. It's a mechanical limitation, and 3 - 6 mm is pretty typical.
tobyhawksmoor wrote:
I would have expected to get a little closer than that to the edges.
Why?
It's likely there is nothing else to try. If you fed the printer something that would or should print to the edges, if the printer was capable of that, and got the 3 and 6 mm printable area margins, that's quite certainly the best it will do.

It seems that I have erased the address bar and can only access firefox thru google. I am using a mac. How do I get it back?

there is an icon in the upper right corner that closes or opens a portion of the top of the page, and I accidentally clicked it, and the address bar was gone. Now I can not open the home page and type where I want to go.

Perhaps the icon is the Full Screen icon, didn't even know there was one. You can use "F11" to toggle in or out of "Full Screen" mode. In full screen mode the Firefox window fills the entire screen, and toolbars typically do not display at all.
If toolbars are showing but not the navigation bar use
"Alt" then View > Toolbars > make sure Navigation bar is check marked, and you can show your other toolbars as well.
If the Navigation bar is displayed but it lacks the location bar look for it at
"Alt" then View > Toolbars > Customize and drag "Location bar" to the navigation bar.
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

I want to see two bookmark toolbars, and can only get one to display.

I have tried to add a toolbar, but it doesn't appear. I have reset my toolbar and tried again. no luck

Try:
*Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/

HT5824 Why have I lost the Outlook contacts and can only access those in icloud on both my laptop and desktop computers

I am trying to send information to one of the contacts that is normally in my outlook address book. That book appears to have gone away. The only contacts I have are those in icloud. I would think they would sync. Apparently i need to do that manually? Many of the contacts that have formerly lived in outlook do not show up in icloud. ?????

If it works on one Firefox 3.6.10 installation, it should work on the other - assuming both PC's have exactly the same version of Norton installed, including that Firefox Toolbar extension. Another possibility is that Norton uses a different version of their software on WinXP than they use on Vista.
Tools > Addons > Extensions - does the Norton Toolbar show as being incompatible?
You could try forcing a Norton program update to see if their Firefox extension gets updated.

Every time I open Mail it fails to respond, the windows stay blank and I get the beach ball and can only close it by force closing. Any ideas?

Every time I open Mail on my Macbook Pro, which is only a couple of weeks old, it fails to open, the windows stay blank and I get the beach ball. The only way I can get it to close is to force it using the command alt esc buttons. Any ideas?

Hi Elijahcross,
If you are having issues with iTunes freezing shortly after opening, you may find the troubleshooting in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

I downloaded an app but cannot see it, i click on the OPEN button in the app store, and can't open the app

I downloaded an app in the app store, but cannot open it. When I go back to the app store and click on OPEN, it doesn't do anything, please help

Try a Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
Does it show in Spotlight a search?

HT4199 I have a Netgear router and have just acquired a Edimax wifi extender. My MacBook Air sees the wifi signal and can get to the internet through the extender access point. However, while my iPhone and iPad mini can also see the WiFi signal, not Int

I have a Netgear WNR2000 router and an Edimax EW-7438RPn wifi range extender. I have gotten the range extender to work well with my MacBook Air, however, while my iPhone 3Gs and iPad mini can pick up the wireless signal from the range extender, they cannot get to the Internet through it. No IP Address, Subnet Mask, Router, or DNS appear in the details on either the iPhone or the iPad mini. How do I get the iPhone and the iPad to connect to the Internet. It seems that the problem is with the iPhone and iPad, since the MacBook Air works just fine with this set up.

Junglemania,
Go into the setup page of the EW-7438RPn. Go to Wireless Advanced Settings. There is a WMM settings. Make sure the WMM is enabled.
This may help you out.

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

Thanks for the quick reply.
So am I correct in saying trying to utilise the Airport Express to access the printer over the network was a wasted effort due to the latest iOS? I had read up on the express before purchase and believed that was one of it's main purposes.
Thanks again for the help.

I lost the lan ethernet connection of an older windows 7 pc to my 3 Terabyte router when adding a new local printer to the pc. How do i set this up again so the PC is recognized and can get to the internet again through the time capsule?

I recently added a new printer to a 2005 vintage PC that is running windows 7. It used to go through a router in my wifes upstairs office to the time capsule by wired ethernet (cat5) but when I added her new local printer thought I would network it, big mistaked, lost all my ethernet connection and she cannot get to the internet. Wireless not an option. How do i set up again the ethernet connection and i will only USB the printer locally this time for the windows pc?
Tried windows diagnostics, and besides telling me to reset everything and turn router off and on etc. I am in an endless loop.
Other Mac products are not impacted by this issue.

I see no direct connection.. a printer and the computer setup for internet are not related.
But it sounds like the router in the wife's office is now in the wrong mode..
If you have an existing main router replace the second router for a switch .. that is the easy way.
Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
BUT I am making a huge number of assumptions.
What I need is the full network layout.. a quick picture would help.
I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
I need secondary router.. if that is what it is, IP and settings.
I want the printer type and model. How it is connected.
BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.

Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer...

I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
Woody

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S.

Upgraded to Leopard and can't Print

Hello,
Ever since I upgraded to Leopard I can't print to my HP 1115. I can print test pages just fine and if I send a normal document from any application and then put my computer to sleep when re-waken it, it will print the document, however the quality is very poor.
I'm running version 10.5.4 on a PowerPC G5. I've tried printing from Photoshop CS, Mail, Safari, and TextEdit.
Any suggestions are welcome!

Hmmm, I will have to see if I still have the install disks I've had this printer for probably 5 years! When I first got my Mac computer with Tiger installed I didn't have to install anything, just plug-in and go. Normally I wouldn't need the disks for printers or scanners its just so much easier to go to the site and download the drivers, mac or PC. That way you don't get any of the extra junk they often have on the disk.
Where would you look for "Pacifist"? Utilities? I'll try doing a search when I get home to see if I can find it myself but I thought I might ask...
I read on another internet page about uninstalling the HP drivers and than re-installing the one they provide. They discribe the same problem I'm having and claim it will fix it. I couldn't do it though because I didn't know how to completely uninstall all the HP drivers on my computer.

In print or print preview I only see the 1st page and can only print the 1st page

Similar Messages

Maybe you are looking for