In print preview of PO shows Different VAT percentage
Dear Experts
In PO print preview VAT amount one time shows 14%, other time it shows 19%, some other time it shows 28%. But actual percentage is 14%. How it shows different time different values.
Please reply
Regards
Karan
Hi,
Might be you have selected Plant/Vendor/Material combination in key combination of FV11.If this is the case then you get the percentage which you maintained for that combination in FV11.check it out for all your combination is FV12.
Thanks
Similar Messages
-
i have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put...
Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.
Make sure you provide the URL for the problematic page, so they can see the problem for themselves. -
Pusrchase order having 3 line item But print preview in PDF shows blank.
Hi All,
Purchase order has 3 line items. While taking print preview in PDF format 1st page shows 1 line item and 2nd page is blank.
I am not understanding the issue why other two line items are not getting displayed.?
Please provide me with the solution.
Thanks
ForumYes,there is a issue in print preview itself , if there is a issue in Print Prview that means page is gets skipped on next page ,therefore 2nd page automatically gets blank ,debug the same with abapor ,if this problem gets resolved then automatically system will convert the document in PDF as per print preview.
Regards,
Sandesh Sawant -
Print Preview: SAP GUI showing updated text, CRM UI not showing updated text
Hello,
can anyone please help me with "Print Preview" button in CRM UI:
In the CRM UI when a certain data is changed on the document, a note on the document is updated with changes in data. When pressing the "Print Preview" button the generated PDF is not showing an updated text. If i run the SmartForm directly in SAP GUI after the data change, the generated PDF shows an updated text. If i reload the CRM UI (close the browser and run the CRM_UI transaction) the "Print Preview" shows an updated text.
What should i do, that the Print Preview in the CRM UI would also show an updated text (without reloading the CRM UI) ?
Im thinking it could be a problem with the parameters SFPDOCPARAMS and SFPOUTPUTPARAMS, that are used when calling the SmartForm FM. The parameters are set as this:
ls_outputparams-nodialog = 'X'.
ls_outputparams-getpdf = 'X'.
ls_outputparams-connection = 'ADS'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = ls_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
ls_docparams-country = 'SI'.
ls_docparams-langu = sy-langu.
CALL FUNCTION lv_name
EXPORTING
/1bcdwb/docparams = ls_docparams
I_HEADER_GUID = ls_orderadm_h_wrk-guid
IMPORTING
/1bcdwb/formoutput = ls_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
SAP gurus, please helpI figured the solution:
In the Code Initialization of my interface (SFP transaction) i had to initialize the buffer:
CALL FUNCTION 'INIT_LOAD_TEXT_BUFFER'
EXPORTING
EXCL_ID = ls_stxh-tdid
EXCL_LANGUAGE = ls_stxh-tdspras
EXCL_NAME = ls_stxh-tdname
EXCL_OBJECT = ls_stxh-tdobject
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
This way the text is loaded from the updated note every time a "Print Preview" button is pressed. -
Time off in print preview doesn't show
Hi,
I'm working in Project 2010 on a Windows 7 machine.
In the Gantt-diagram the time off (saterday and sunday) is shown.
However, it doesn't in the print preview neather on the print itself. Te free time is just as blank as the rest of the week.
I use project a lot but never had this problem.
Even when I copiet the rows to another project where I didn't have the problem, the problem also moved to that project..
Hope anybody can help me with this problem.Have you compressed the print so you are not showing every day? Check File > Print and click the Page setup hyperlink. On the Page tab does it show 100% ?
-
Print preview window not showing page to be printed
My wife and I just downloaded Firefox to our new Macbook Airs with Lion. The small preview box in the print layout widow does not show the page being previewed. In addition, the selected print windows are not holding from print session to print session.
I love Firefox on my old Mac, so please help us resolve this problem.
Pete
[email protected]Sean, I was importing directly from the camera to Lightroom. I might add that I have been using this same procedure for a couple of years now and only within the past few weeks have the problems come up and if I made some change somewhere along the line I certainly have no idea what the change was. As I have mentioned before in some of this forums communications, when I imported directly from a card reader outside of the camera, everything was just as it should be and yet up to a couple of weeks ago, I could import directly either from the camera or a reader card with the same perfect results. (This is from my Canon XTi as I do not have a card reader yet for the G10) I would assume a card reader will work as well for the G10 and so I have ordered one and hopefully this will be a rather simple solution to the problem. As John had indicated in one of his messages he occasionally liked to import directly from the camera and I echo that as I do also.
Bob -
i am using web fonts in my web page, this web fonts are for displaying bar-code, they seem to work properly when seen while browsing but when i try to print that displayed bar-code it is unable to recognize the web fonts.
What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Issue in viewing 'Print Preview' of SAPScript output in different languages
Hi All,
I have developed a SAP Script.
It is working correctly in English in all aspects.
I have created few standard texts for headers in SO10 and maintained in different languages.
In Print program also while retrieving these text i have used Order's language.
In debug mode also it is showing texts in different language (Chinese, Japanese, Thai etc...).
But in print preview it is showing as # every where we suppose to print headers from standard texts.
How can i view these texts in their original language (Order)!
Can anybody provide the solution for the same!
Thanks in advance.
Thanks,
Deep.Hi,
I have selected 'Supplemental language support' boxes.
But still it is not working.
Can anybody solve above posted issue!
In PO it is showing in Japanese/Chinese etc.. characters.
In SO10 it is showing texts in respective languiages.
In debug mode of Print program & Layout set text is shown in respective language of text based on country of PO.
But in print preview it is showing as # everywhere there must text in different language.
Only in English i am able to view print preview correctly.
Can anybody provide inputs for resolving this issue!
Thanks in advance.
Thanks,
Deep. -
Button "Print Preview" is different - ME5A
Hi guys.
Hello I'm from the area of Basis, and I do a silly question.
The MM functional consultant wants to know why the Print Preview button previously showed a sheet with a magnifying glass, now shown with two boxes with an arrow.
They were used whenever the button was Print Preview to the previous button.
This I can customize??
We have ECC 6.0 with EHP4. I´m check other system with an ECC 6.0 version and has the correct button.
This happens in the report ME5A when used with ALV list
Thanks for the help
DesiréHello Sidi
Regarding your question:
Are you saying that the two buttons with the arrows both functions as Print Preview?
I have only one button for Print Preview with the arrows. The functional MM says that this is not the correct button. The right button is available in other reports of SAP
Did the MM guy test what these arroes do?
The button with two arrows is working properly to see the print preview report, but users were used in different versions of SAP was the other button to see the print preview
Do not know if this change is standard for SAP ECC 6 version EHP4.
In ECC 6.0 is correct the button. -
Printout is different then print preview in smartforms
hi all,
i had created one smartform, but when i check the print preview it is showing desire output but when i print the form second page data is coming in BOLD,
can someone please help me in this.??
points will be rewarded as per the solution.
thansk in advance.Hi,
Try to create the style and assign that style in the output options of that particular text and also select the text mentioned in the general attributes and assign the character type fo thtat text.In order to create the stly so to smarform tcode select style radio button mention your style name zxyz (etc) now press create you will fine paragraph and character format folders.Now right click on character format folder and select create node now give your format name description for the character format now slect font tab and mention the font name and size(this is what you have use in general attributes text selection) this created character format will be found once you mention your style name in the output options(ZXYZ).Hope i am clear.
Reward if helpful.
Regards,
Harini.S -
User gets odd behavior when print previewing calendar
User calls with an odd problem.
She is using 32 bit IE 9 with our SP 2010 farm.
She goes to her department calendar. She sees events.
She presses Print Preview. No events are shown on the page.
She tries to export the data to Outlook - it tells her there is too much data.
She calls me.
I look - her default view is running into the resource throttling of the farm. So I try to create a unique view that only shows this week's events.
It works fine for me. Print preview and printing work as well.
When she looks at it in her browser, it works fine.
When she tries to print preview - no events show up on the preview page.
She tries to export from the new view - Outlook gets no events.
She is using IE9, so the IE7 comments in old threads are not relevant.
I set the web part configuration to 12 inches as one conversation suggestions. That doesn't help.
Does anyone else have any ideas of things to try?When I look at the custom calendar within SharePoint Designer, the page has a ListView Web Part but not an XsltListViewWebPart.
I have tried several times to step through blog entries that describe editing the page, setting the view of the web part, etc. At one point whatever I tried turned the calendar view into a list view ... sigh. I created a new calendar view and made it
the default.
I have asked the user to try the print preview out today to see if it works for her after I created the new view.
The really odd thing about all of this is that at least 2 people don't have the problem with not seeing event data in the print preview.
It _almost_ sounds like some sort of machine specific issue she is having.
I wonder if I should ask the admins to repair Office 2010 on her machine to make certain the DLLs are all working properly. -
Smartform to PDF, how to suppres Print/Preview dialog
Hi Experts,
Facing some issues in downloading PDF converted from Smartform.
In the program I am trying directly download a smartform converted into PDF format and save it in local system.
When ever I am trying to execute the program it shows up the Print/Preview dialog before showing the Save As dialog.
I have passed control_parameters-getotf = 'X' to the smartform runtime FM, which ideally should have suppressed the Print/Preview dialog and return the otfdata.
Here the entire code is...
REPORT yfr_invoice.
TABLES : t001, bsad, bsid, kna1,sscrfields .
DATA : fm_name TYPE rs38l_fnam.
DATA : it_bsad TYPE STANDARD TABLE OF bsad.
DATA : BEGIN OF it_bseg OCCURS 0,
belnr TYPE belnr_d,
END OF it_bseg.
DATA : error_flag.
DATA:
cont_param TYPE ssfctrlop,
out_param TYPE ssfcompop,
otfdata TYPE ssfcrescl,
t_tline TYPE TABLE OF tline INITIAL SIZE 0,
t_docs TYPE STANDARD TABLE OF docs,
v_filesize TYPE i,
v_name TYPE string,
v_path TYPE string,
v_fullpath TYPE string,
v_filename TYPE string,
v_filter TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS : s_bukrs FOR t001-bukrs NO-EXTENSION NO INTERVALS OBLIGATORY.
SELECT-OPTIONS : s_gjahr FOR bsid-gjahr NO-EXTENSION NO INTERVALS OBLIGATORY.
SELECT-OPTIONS : s_rebzg FOR bsid-rebzg OBLIGATORY.
SELECT-OPTIONS : s_kunnr FOR kna1-kunnr.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'YFF_INVOICE'
IMPORTING
fm_name = fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
cont_param-getotf = 'X'.
cont_param-no_dialog = 'X'.
cont_param-preview = 'X' .
CALL FUNCTION fm_name
EXPORTING
control_parameters = cont_param "Passing getotf = 'X'
IMPORTING
job_output_info = otfdata
TABLES
s_bukrs = s_bukrs[]
s_gjahr = s_gjahr[]
s_rebzg = s_rebzg[]
s_kunnr = s_kunnr[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = v_filesize
TABLES
otf = otfdata-otfdata
doctab_archive = t_docs
lines = t_tline
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONCATENATE 'filename' '.pdf' INTO v_name.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
default_extension = 'PDF'
default_file_name = v_name
file_filter = v_filter
CHANGING
filename = v_name
path = v_path
fullpath = v_fullpath.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_filesize
filename = v_fullpath "'C:\Test.pdf'
filetype = 'BIN'
TABLES
data_tab = t_tline
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
The program other wise works absolutly fine .
Please advise.
Thanks
JahanModerator message - Cross post locked
Rob -
PO print preview By (Split Valuation)
Dear Gurus,
A material(Spark Plug) which is valuated by Manufacturer say TATA and SIEMENS
PO will be created 100 PCS with Valuation Category TATA
When i click Print Preview its description shows only Material like "Spark Plug"
but not like "Spark Plug TATA"
Is it possible to view print view like that??
Thanks
RegardsHi,
You can view SAP notes
[https://websmp102.sap-ag.de/notes]
for this you should have id and pw.
regards
suresh -
Download smartform as PDF, suppress Print/Preview dialog
Hi Experts,
Facing some issues in downloading PDF converted from Smartform.
In the program I am trying directly download a smartform converted into PDF format and save it in local system.
When ever I am trying to execute the program it shows up the Print/Preview dialog before showing the Save As dialog.
I have passed control_parameters-getotf = 'X' to the smartform runtime FM, which ideally should have suppressed the Print/Preview dialog and return the otfdata.
Here the entire code is...
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
The program other wise works absolutly fine .
Please advise.
Thanks
Jahan
Edited by: Rob Burbank on Apr 8, 2010 11:10 AMHelloo Guyz...
I am exactly trying the same, but the Print Dialog is still coming ...
See here is my code ..
cont_param-getotf = 'X'.
cont_param-no_dialog = 'X'.
cont_param-preview = 'X' .
CALL FUNCTION fm_name
EXPORTING
control_parameters = cont_param
IMPORTING
job_output_info = otfdata
TABLES
s_bukrs = s_bukrs[]
s_gjahr = s_gjahr[]
s_rebzg = s_rebzg[]
s_kunnr = s_kunnr[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
even after this ..during execution the the Print Dialog is coming..
I have no idea what esle I am missing..
Thanks -
Hi Gurus
I need to see the print preview or print output of an document like Sales invoice or Outbound delivery in Languages- Sweden , Italy , Spain,France. I have tried by setting in the respective language in VL02N but still reflecting the print preview or output in english.
If it is maintained in english when the ouput is chooses as other language why not reflecting ?
Is it because the Material maintained in english or any other settings/config to be done?
kindly advise your inputs on this.
Regards
PPHi,
I had faced the same problem.
If you have maintained transalations for text in other languages also, in print preview it will show it in English. I was using chienese and german languages to test.
When you move the changes to Quality, you can see those changes getting reflected.
This is what happened with my case.
Thanks,
Archana
Maybe you are looking for
-
Can I share my books in my iBook app with an iPhone visiting on my network?
Can I share my books in my iBook app with an iPhone visiting on my network?
-
ALBPM Studio and Directory.xml
Can I use ALBPM studio to deploy the process(start engine) and still use the PAPI apis to list the processes? I the web-INF dir, I dont see the directory.xml but it can be seen in the case of enterprise installation which requires the deployment of t
-
Hi, I have a MBP connected to an Eizo display. Each display has its own calibration. To use the colour profile of the second display do I work in clamshell mode, Aperture mirroring mode or just drag Aperture to the second display? It seems to me that
-
Deploying Web services written in C to Oracle Application Server
Hello, Has anybody got information on deploying a web service written using C & gSoap into Oracle Application Server. I have a web service written in C using the example provided by gSoap and would like to deploy this on Oracle Application Server 10g
-
I have a large media library on my Mac running home sharing through iTunes. Many of my tv videos I have cut from DVD however when I use my Apple TV to show episodes they list in order but when I use my iPad it shows up in what seems a random order.