In printing a document my preview mode does not work??

in printing a mail recieved message my preview mode sends a message stating Preview is not supported???

I have paid the full extended version, but it is not working. See my screenshots.

Similar Messages

Printing only odd/even numbered pages does not work

I've got following problem: Printing only odd/even numbered pages does not work. Not in Preview, nor Adobe Reader. I Don't know why. i'm using a hp Color LaserJet 2550L. I just worked fine, but I cannot remember the time this failing first occured. I really hope the problem will be solved quick and easy.
Thanks so far
Bastian.

Mine does not work either. I have trashed prefs, rewrote permissions, ran Disk Utility from a separate HD, etc. and I cannot get this feature to work.
I got 45 odd pages to print last night and now it won't print odd or even pages. I am reduced to printing every backside page one at a time. If I would have known about this problem before I could have saved myself an hour and just printed them all on single sided sheets. I tried to save paper and now I'm screwed (timewise)......
Any other suggestions would be greatly appreciated.
Thank You,
Dave Buckley

I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck.

Preview Outlook2013 does not work on RDS2012R2 terminal server

Hi.
I am IT manager for a new RDS 2012R2 environmnet with 2 terminal servers running MS Office Professsional Plus 2013 SP1 Norwegian.
The main problem :
Previewing of word/excel/powerpoint file attachments in Outlook2013 does not work on these 2 RDS2012R2 terminal servers.
The excel error is telling me the following message:
"Cannot preview this file because an error occured in the following preview program: Previewing in Microsoft Excel"
Previewing is OK functioning with file explorer but not with Outlook2013 consistently.
I have updated both 2 RDS 2012R2 TS servers with the newest Windows Updates for Office 2013 and OS as well.
I tried several times to rin repair of the Office Pro Plus 2013 installation with reboots with no positiv soultion to this preview problem.
I searched the Internet/Google for hours without any luck anf here is some of the URS I have tried so far:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-cant-preview-word-excel-files/18c6b2da-17a0-4079-8694-d7aa0f7dfaee
http://answers.microsoft.com/en-us/office/forum/excel/outlook-2013-excel-attachment-error-microsoft/af38d448-0fa0-4b0b-a42b-60a1c58746e5
http://answers.microsoft.com/en-us/office/forum/outlook/please-help-this-file-cannot-be-previewed-because/ca25f299-d216-4e23-a99b-f0595552063d
Outlook 2013 excel attachment error: microsoft excel cannot open or save any more documents because there is not enough
available memory or disk space
http://superuser.com/questions/762773/this-file-cant-be-previewed-because-of-an-error-in-the-microsoft-word-previewe
http://superuser.com/questions/554327/outlook-2013-email-attachment-previewer-sometimes-stops-working
http://community.spiceworks.com/topic/386255-office-2013-word-excel-unable-to-preview-files
This is a major problem and I am very thankful for
a 100% accurate answer and solution
to this preview headache.. :-)
Regards
[email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi,
Thank you for posting in Windows Server Forum.
Might possible that DCOM permission got changed and to verify that you can check following steps.
Go to start, then run. Type dcomcnfg and push o.k. Component Services should come up.
Expand Component Services, click on Computers, then "Right click" on My Computer and go to "properties".
Click on Default Properties tab, and make sure the following is set:
Default Authentication Level: Should say Connect, not "None"
And Default Impersonation Level: SHould say Identify.
When those are set properly, hit ok and turn on your protected mode back on your Office applications.
In addition to this, please check whether you find any information from event log for this case. Also try to add Builtin users to grant read, write and execute persmission.
Hope it helps!
Thanks.
Dharmesh Solanki

Digital ICE epson scan (professional mode) does not work

Hello,
I am running the latest Mountian Lion OS on my IMAC and have recently started running some test scans with my Epson Perfection V700 scanner. The supplied Epson software , Epson Scan offers a variety of operating modes, "professional mode" offering the most features. Professional mode offers Digital ICE as an option, however when selected, the Digital ICE does not work.I have compared scans with and without digital ICE and they are exactly the same. Scratches and dirt are not removed by the scan.
If I select a more basic mode ("Home Mode") Digital ICE does work. But this other mode does not offer the range of options offered in porfessional mode.
Has anyone out there used Epson Scan software? Has anyone else experienced this problem? Is there other scanning software out there which could fully exploit the features of the Epson scanner I have? I tried Vuescn and it does not seem to be compatible with my scanner, so that is off the table.
Dean

You should first read the user manual that came w/your scanner and/or contact Epson tech support.
How is the scanner connected to your iMac? USB cable? Wireless? Firewire?
Has anyone out there used Epson Scan software?
I have an Epson scanner. It only work when it's connected directly to my iMac via USB cable.
Has anyone else experienced this problem?
Initially.
Is there other scanning software out there which could fully exploit the features of the Epson scanner I have?
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print/scan
Sometimes, installing the GIMP drivers help with printing/scanning issues: http://gimp-print.sourceforge.net/MacOSX.php

Wireless printing on HP 6500A Plus -wireless does not work

windows 7, linksys E2000 router, sony vio computer wireless N.
No issues printing by USB. When using wireless, prints first few lines, then slows to a stop. Loses feed from router and disconnects. Tried disabling all firewalls, removed antivirus, etc - nothing is working. Not the only computer in household with same issue as well - Toshiba running xp is having same problems. Need fix or I will trash printer and never purchase HP again and I have long been an HP customer for printers.

There have been a few issues with printing using the new E-series Linksys routers. Make sure the router has the latest firmware. If that does not work, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

PDF Preview Handler does not work

Hello,
We installed Outlook 2010 on a new Windows 7 32bit machine with Acrobat Reader X.
The preview handler for PDF files does not work in Outlook 2010. Reader works fine by itself.
If I uninstall Reader X and install verison 9.3 then the Preview Handler works fine. Any suggestioers? I have run the repoair on Office and reinstalled Reader X again but to no avail.
- Neil

No i didnt check for office updates.. however i did locate a fix. I am not usually keen to try random fixes so i tested it solo first to confirm it was legitimate. worked fine. http://www.pretentiousname.com/adobe_pdf_x64_fix/
Thank you for attempting to help me though.
Regards,
Will

Clamshell mode does not work with Mountain Lion.

Installed Mountain Lion on 11" MacBook Air last Friday night. Now system does not appear to work in Clamshell mode, as it won't wake or connect to external monitor.

Apple Tech Support was very helpful. The MBA works in clamshell mode next to my monitor now -- but does not work in the Henge Dock. Henge Dock has been contacted.

Antares autotune 4 graphic mode does not work in Logic

Has anyone found a workaround for the following issue:
Using Antares autotune 4 or 5 in Logic pro 8, I cannot use the graphical mode how it was intended. Using Cubase, I was able to launch the plugin, switch to graphic mode, and track the pitch vs time. This was useful to manually correct the pitch for each syllable. For some reason, this function does not work in Logic Pro 8. Any thoughts as to why? Am I doing something wrong? Please advise.

I haven't used AT in years, but I do still have AT 4.
Graphic mode works just fine here in Logic 8, and I'm still on Tiger as well, albeit 10.4.11
Not that you asked, but seriously, look into Melodyne. AT is so archaic as far as it's graphic mode is concerned. 30 seconds back with it and I can't seriously see why anyone would use that plug-in, other than maybe manual mode, for a quick "run a comb through it" fix.
Sorry I couldn't give you an answer as to why this is happening. have you contacted Antares?

Powersave mode does not work

Hi,
This is my first post. I have a new HP Laserjet CP2025dn. The printer is connected to a home network via an ethernet cable (the printer has a built-in connector for this). It is not connected wireless.
The powersave mode kicks in intermittently. The printer should go into powersave 15 minutes after it's been idle, as long as I do not print to it or touch the control panel. But when it goes into powersave mode, it comes out of it by itself into the "ready" mode, without any print job having been sent to it or anyone physically touching the printer. It later goes into powersave mode, but the time it takes to do this varies. I have tried installing the latest firmware but it makes no difference.
Now if I disconnect the network cable, it works properly, that is that it will go into powersave by itself and stay there (since I cannot send any print jobs to it with the cable disconnected). So I must assume that some network activity is causing the printer to come out of powersave mode, but I would assume the printer is designed to do this only when a print job is sent to it, regardless of any network traffic or PCs on the network turning on or off.
Is this printer behaving as it should? If not, is there a solution? HP tech support seems at a loss to fix this.
Thanks.

hello its not firmware 9.42 causing....
Powersaver - Automaticaly KeyPad will Off by seconds
Sleepmode - it will be Stand by ---> you see its normal to see your wallpaper/screensaver when the screen light was off but in your screen its Stand by and nothing else ....
Also Tip...
Try to on your Automatic Keypad Lock Standby its a Combination of SLEEPMODE of your Phone
You can set the timer of Keypad
menu-->Setting-->Phone-->Automatic keyguard
and try to update your firmware ver9.42 into new ver10.10
i change my firmware 9.42 into 10.10 it will be fix your fullscreen als.
Message Edited by neverwinter on 08-Jun-2009 11:37 AM
Message Edited by neverwinter on 08-Jun-2009 11:38 AM
My Phones
Nokia 3210,3310,8250,2610
Nokia (ExpressMusic) 3250,5310
Nokia (Nseries) N70 N73
[IMG]http://i121.photobucket.com/albums/o220/holodeck3/untitled-3.jpg[/IMG]

LiveCycle Designer won't preview with Reader DC. Preview mode will not work. Attempting to preview gets errors (507:507), (103:103), and sometimes crashes LiveCycle Designer. How do i get preview mode?

I can not get LiveCycle's preview mode to work. It has worked in the past, but now with Reader DC i can't use preview mode. How do i get Adobe LiveCycle designer to work with Reader DC?

nikg-fh schrieb:
it seems the problem is caused directly by adobe reader X.
I just have started a new descussion here (adobe reader forum).
If anyone could help me, feel free to do so!
my configuration:
windows xp pro
adobe reader x
adobe livecycle designer 9 ( therefore it is not an version 8 issue )
admin rights on the pc ; )
I might add that you are not alone!
I am having the same problem (LSD ES2 (version 9.0.0....) and Adobe Reader X and Acrobat Professional 8)
Whenever I save a form as PDF and open it with Reader or Acrobat I get to see the console.
But never when I view the form in Designer preview!
That used to work until I installed Reader X.
Same as you I checked all configurations in Reader and Acrobat: all perfect.
I really do hope that someone finds a solution for this.
PS. This problem should be discussed in THIS forum. It is clearly a Designer problem!

3 times..i hate 4500 wireless printer,,,can i return...does not work

heloo...4x...i hate 4500 eireless printer...can i return

Hey there!
Im sorry to here that. But if its not working properly we can try to troubleshoot. But regarding your question if you can return it. Ofcourse you can, provided that you purchased it within a month.
if one of my advice works or helped a little, you can click the *KUDOS* button on the left. thanks.
Disclaimer : Even though im working for HP, all comments and suggestions are my personal opinion. HP still has a process to follow. (But i hope it will help ü)

Print VI front panel to file does not work after building executable.

I am using a property and invoke node to print the front panel of my VI to an HTML file. It works fine in the development mode. After Building the application, this subvi will no longer
print the front panel. Is there some special files that included in the build??

You can use the Report Generation VIs to generate the HTML report. Specifically, you could use Append Front Panel Image to Report.vi and Save Report to File.vi to save the image of the panel to an HTML report.
Check out the examples in examples\reports to get a better idea how to use these VIs if you've never used them before.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Windows Explorer Preview pane does not work with .docx files

This question follows on from previously unresolved questions posted on this forum (see http://social.technet.microsoft.com/Forums/en-US/aec7b30a-0709-4d54-b5c7-570dc5b115df/preview-pane-and-windows-explorer?forum=officeitproprevious) and another forum I
have visited.
The problem:
In windows explorer scrolling down (using mouse or arrow keys) in the library pane from one file to the next stops at a word document with more than 2 pages. Instead of continuing to scroll through the file list in the library pane it switches to scrolling
through the pages of the document in the preview pane. This is a major pain because it impedes being able to move quickly through the files within a folder.
The logical way this should work is to always scroll within the library pane unless you click in the preview pane to scroll through the document preview. This isn't how it is working.
I am using Windows 7 with Microsoft Office 2010.
Can someone please provide give me a solution.
http://social.technet.microsoft.com/Forums/en-US/aec7b30a-0709-4d54-b5c7-570dc5b115df/preview-pane-and-windows-explorer?forum=officeitproprevious

Hi,
I did a test on my machine, couldn't reproduce this issue.
There doesn't seem to be any settings on Office to change that; anyway, please try repairing Office in Control Panel to try again.
Since it may be an issue more related to Windows Client, I suggest you post this question in Windows Client forum:
http://social.technet.microsoft.com/Forums/windows/en-us/home?category=w7itpro
Regards,
Melon Chen
TechNet Community Support

EA6700 bridge mode does not work - error 2218

I've just bought WiFi router EA6700-EE and now trying to configure it.
After connecting to Internet I upgraded its firmware to the latest version.
I want it to be just a bridge but when I select this option and press OK I get a message (translated from Russian):
"Unexpected error 2218
An unexpected error occurred. If this problem persists, please visit our web site technical support.
Details
/jnap/ui/SetRemoteSetting"
Is it possible to fix it?

What Hardware version is your router?
What Firmware version is currently loaded?
What region are you located?
Was a Factory Reset performed before and after any firmware updates then set up from scratch?
I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
PC Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the Admin account on the router.
Try this as a test and see if cascading method works:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=169333b784cf4c78b8db5490f85c518a_Setting_.xml&pid=...
morales2k wrote:
I am also having this issue (with the exact same error details), the ip is indeed ipv4.
My current setup is that this router is connected to another router.
The router giving out the error was previously set up to use automatic dhcp, but then it had dhcp disabled on another screen, instead of setting it up in bridge mode in the first place.
I went in and tried to set it up in bridge mode, but then it gave out this error.

In printing a document my preview mode does not work??

Similar Messages

Maybe you are looking for