In PS CC, actions not recording settings made...

Hello people,
I could use your help in figuring out why in PS CC, when recording an action, it records adding adjustment layers but not the setting put in the adjustment layers. Help!

There are problems playing actions that add adjustment layers. There is also a difference between how old versions Photoshop recorded Adding adjustments layers an newer versions of Photoshop record adding adjustment layers.  Old versions recorded a single step that identifies the adjustment type and included adjustment types setting used.  Newer versions of Photoshop record two steps the first make the adjustment layer type and the second step make the adjustment type layer adjustment.
There is a potential problem playing actions that add adjustment layers since CS4.  In CS4 Adobe added the Adjustment palette panel in its Fly-out menu Adobe has two options that change Photoshop default behavior of how Adjustment layers are added.  Actions, Scripts and Plugin can not query these option or set them. Therefore adjustment layers may be added differently then how the automation is designed to work if these options are changed from their Adobe Default settings.
However adjustment layers are not always added the way these options are set.   If there is an active selection active when and adjustment layer is added Photoshop will add a layer mask. It make no difference how the option is set. A layer mask will be included when there is an active selection.   Also If you record adding the adjustment layer using the menu layer>new adjustment layer>type  And in the New Adjustment Layer dialog you check clip to previous layer the layer will always be added clipped it makes no difference how the option is set. The adjustment layer will be added clipped when the box is checked the option is recorded into the action step.   So it is possible to record actions and write scripts the work a known was and can be changes after the adjustment layer is added.   However the does not help old recorded or even new actions that were or are being recorded in a more natural way.   It is best to just forget these options exist and lean them at the default setting.  That way Photoshop behaves as it historically work. .

Similar Messages

  • Actions not recording curve/levels adjustments or presets

    Hi
    I'm trying to record an action in Photoshop CC, but it seems to refuse to record adjustments or the selection of a saved preset.
    All I get when I play the action, is a new curves or levels layer without my adjustments.
    Hope someone can help.
    /Martin

    I am having the exact same problem. Other adjustment layers when changed record a "set current layer" but loading a preset or making a change on the curve is not being recorded at all. Tried deleting my prefs and that didn't solve anything. Would love an answer to this!

  • Mouse audio/actions not following settings

    Hello all,
    First off, I am using Captivate 4. As for my output type, I'm not sure of that at the moment - but I don't know if that's essential to this issue.
    In the slides that I'm editing, I have captured my mouse navigating through a website. For the majority of the slides, the audio is doing the exact opposite of what the settings dictate. If I have selected to play the mouse click's sound, it doesn't play the sound. If I have NOT selected the mouse click sound to play, it plays. Only on one slide does it actually do what I ask. And I have also noticed that if I ask it to NOT show the mouse click, it shows it anyway, and the other way around.
    I thought maybe by adjusting the settings to the opposite of what I want, I could trick the program - alas this doesn't work either.
    What am I missing? Is there a master setting somewhere that's laughing at me?
    Thank you kindly.

    Well, nevermind... when I preview the entire project, things seem to work as planned. When I'm previewing individual slides, it's not the case but I suppose that's not a big deal.

  • Need Photoshop action to record WHERE on canvas a layer is placed, NOT how many pixels it was moved.

    Hello everyone,
    I'm pulling my hair out trying to figure this out.
    I created an action:
    I have a bunch of PSD files of some pretty expensive rings that were shot at hi-res and cropped.
    Now, i have a canvas that is 996x1104 px.
    All of these rings must sized to 540px width AND positioned on the canvas at x:498px and y:706 (the bottom of the layer must touch 706px, which I did by clicking on the little tiny box at the bottom of the little square made of little squares (that's next to the x and y positions when you are on Transform mode).
    I made an action for all of these steps.
    However, when I batch a group of these hi-res ring PSDs and apply the action,
    they are always in different spots. They all need to be set on y:706px so it looks like they are all resting on the same plane.
    I found out why this is happening:
    because when I position the ring when creating the action, Photoshop records HOW MUCH in pixels I moved the layer... NOT WHERE ON THE CANVAS IT'S POSITIONED.
    This is what I need: to have Photoshop record WHERE on the canvas the layer is positioned.
    Can anyone help?
    We have so much work to do by Monday and setting up this action would definitely help us.
    Thanks so much!
    _Chris

    Did you try settings the rulers units to Percent before recording the action and see if that makes a difference?
    You might possibly need a script for your goal, in which case you could ask over on the photoshop scripting forum:
    http://forums.adobe.com/community/photoshop/photoshop_scripting

  • OpenScript does not record Forms actions

    Hi all
    I've installed a fresh R12 instance with Vision DB to demo OpenScript/OLT. I had some challenges getting R12 up and running on Win2k3 :) but it's running now and I can login to both web and forms screens. It's 12.1.1
    OpenScript will not record the forms actions though. It records web fine and records the action to launch the forms screen but nothing after that. I'm running OpenScript on WinXP with JRE 1.6.0_21. I'm using the Oracle EBS/Forms script type.
    I've done some digging around these forums and elsewhere and previously there seems to be some work that needed to be done with jars to get the forms recorder to work. Is this still the case? What are the best steps to diagnose this problem?
    thanks for any help

    I think it is better to not use Socket mode. Do you have control over your server? Which mode are you using now?
    1. Look in the Java Control Panel -> Network Settings. Be sure "Use Browser settings" is checked, and that the default browser is the same one you are recording with in OpenScript. Make sure the JavaConsole does not have some other proxy configured.
    2. Is your Forms NCA traffic configured on the server for Socket mode? In OpenScript Recording settings for EBS/Load you may need to check "Force HTTP Recording"
    3. Is your Forms NCA traffic configured on the server for HTTPS?
    Are you using IE or Firefox? Have you been able to record record regular HTTP scripts? What is your default JRE?

  • Hi! i just bought the iPad mini 3 today with a case that supports the automatic sleep/wake lid action but i could not find the setting for the sleep/wake lid action in my settings.

    the cover i bought is from the brand called iPearl and it supports the auto sleep/wake lid action but i cant find the settings for it in my settings>general. now my iPad wont sleep when i close the lid. how do i find the option for this action in my settings on my ipad?

    The setting should only appear with the cover installed. Try settings> general> IPad cover lock/unlock> on. Thanks go to Diavonex and Chris CA from this earlier thread.
    The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work. What's going on?

  • OpenScript - do not record ADF adf.inputText actions

    Hello,
    I'm wondering why openscript engine do not records ADF adf.inputText actions  ? with a buttons, radio buttons etc. recording works correctly but not input fields?
    I constructed manualy adf.inputText  and it seems works , but why when I'm recording not works? Can anybody help me ?

    Hi,
    i'm having the same issue.
    I'm using Weblogic 10.3.4, Jdeveloper / ADF 11.1.1.4 and OpenScript 9.2.1.0.
    In previous versions of ADF and OpenScript i had to change some "Correlators" to make things work.
    When will OpenScript work 100% with ADF?
    Anybody else? Any tips?

  • Not catching mobile network what to do? Reset network settings made no sim card in working condition box long lost what to do?

    not catching mobile network what to do? Reset network settings made no sim card in working condition  box long lost what to do?
    <Edited by Host>

    Contact your carrier and don't post personal information on a public user forum!

  • Captivate 7 not recording clicks suddenly

    I have been using Captivate for about 2.5 years now and have never experienced this problem.  Two days ago, I didn't have an issue, but today it will not record my "clicks" when attempting to record a software simulation.  However, it will record any keyboard actions.  I've checked settings and it is set to automatically record, so I'm not sure what's going on.  Any suggestions or help would be greatly appreciated!  thank you!

    Create another document and try again.

  • Hypev "automatic start action" not retained after live motion

    Hi,
    We have a hyper-v cluster of 2 windows 2008 R2SP1 nodes.
    We found that the settings we made in the VMs "automatic start action" were reset to "none" after migration between the nodes .
    We need to have it maintaned
    thanks
    Stefano

    Hi ,
    I think there may be something unclear in my previous email. Ok, I will detail it.
    If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host.
    You should set this via the Cluster Manager by the following setting:
    This is what I said:
    If you change the configuration of a virtual machine, we recommend that you use the Failover Cluster Manager snap-in to access the virtual machine settings. When you do this, the cluster is updated automatically with the configuration changes. However, if
    you make changes to the virtual machine settings from the Hyper-V Manager snap-in, you must update the cluster manually after you make the changes. If the configuration is not refreshed after networking or storage changes are made, a subsequent failover may
    not succeed or may succeed but result in the virtual machine being configured incorrectly.
    Thanks. Feel free to let me know if anything is unclear.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Hi Aaron ,
    yes I think there's a misunderstanding about the question .
    When you say
    "If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host."
    you mean that it is supposed to work this way ?
    I mean , If you make a VM HA with clustering is it an accepted behaviour that the setting of " automatic start action " ( not the stop action you posted the picture of ) is not maintaned after a live migration even if such setting is made through the failover
    cluster manager ?
    If you are telling me that this is what it is supposed to work I don't agree , because I wish I can have a way to set a priority in VM startup in the case of complete shutdown/reboot .
    Working with vsphere as well this is possible and I thought it was the same with Hyper-v
    To solve this problem I had to create a group policy's startup script for the cluster nodes in which I start the VM in the correct order with some timeout .
    Thanks
    Stefano Colombo

  • My iphone 4s does not record high definition video

    I cant find anything in the settings that allows 1080p to be turned on or off, but my camera is most definitely NOT recording at this level.  Any suggestions as to how I can change that, or do I need to visit the Apple store?
    Thanks!

    I"m not even trying to pull them from the phone.  I record a video, using the back camera, and when I watch the video on the phone itself, it is VERY grainy.  My girlfriend has the iphone 4 (no 's') and the videos on her phone are much clearer, even when sent to my phone for viewing.  I've cleaned the lens, and made sure the case doesnt get in the way, or cover the lens in any way.
    I think I just got a bum phone, but wanted to be sure there isnt something in the settings that I need to adjust before taking it to the Apple store.  Closest one is an hour away, so I dont want to make the drive if I dont need to.
    Thanks everyone for replying!  I appreciate the willingness to help.  I"m going to find time to get to the store and have them look at it.

  • Microphone not recording

    has anyone any ideas please. Mic not recording sound or working using Skype.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

    In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
    i have been provided with this info
    You can find troubleshooting tips, how-to articles, and moderated
    > > discussion forums on our support website:
    > >
    > > www.apple.com/support
    > >
    > > iPhone: Basic troubleshooting
    > > http://support.apple.com/kb/HT1737
    > >
    I did every step in the link that i have been provided with (thank you), but I’m
    still experiencing the same issue. My experience with Apple has been
    excellent and this has been the first time I have experienced something
    like this with an Apple product. I hope we can find a quick solution.
    In order to get the iPhone 5 as soon as it launched (being a major fan of
    Apple products!), I purchased my iPhone 5 from the UK through a friend of
    mine who lives there.
    My question is: can I have the faulty device replaced within Saudi by one
    of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
    avoid the disruption, complication and expense of sending it back to the
    UK.
    Could you advise whether this is possible or not, and if not how should I
    go about having the device replaced?
    Thank you in advance for your cooperation.

    Nice try! Take a hike.

  • How to add custom actions to the Settings page for a Document Library?

    I want to add a custom action under General Settings on the Document Library Settings page (listedit.aspx). So I added a new SharePoint 2010 "Empty Element", and put this code in the Elements.xml file:
    <?xml version="1.0" encoding="utf-8"?>
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <CustomAction
    Id="MyClassName"
    Sequence="999"
    GroupId="GeneralSettings"
    Location="Microsoft.SharePoint.ListEdit.DocumentLibrary"
    Title="My Link"
    Description="My description here"
    Rights="ManageWeb">
    <UrlAction
    Url="~sitecollection/_layouts/MyProject/MyPage.aspx"/>
    </CustomAction>
    </Elements>
    I found the GroupId and Location here: http://msdn.microsoft.com/en-us/library/bb802730.aspx but I am starting to wonder if this documentation is for MOSS2007 rather that SP2010
    as it says.
    What am I missing?
    Any help or hint would be greatly appreciated!

    Hi Henrik,
    Can we add above custom action in our custom group like General Settings?
    I have tried for that but it is not working.
    I have tried as follows
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <CustomActionGroup
    Id="LibrarySettings.MyGroup"
    Title ="My Group"
    Sequence="1000"
    Location="Microsoft.SharePoint.ListEdit">
    </CustomActionGroup>
    <CustomAction Id="Custom.Configuration.ListCustomSettings"
    GroupId="LibrarySettings.MyGroup"
    Location="Microsoft.SharePoint.ListEdit"
    RequireSiteAdministrator="FALSE"
    Sequence="100"
    Title="Library Admins">
    <UrlAction Url="_layouts/15/LibrarySettings.aspx?List={ListId}" />
    </CustomAction>
    </Elements>
    But custom group is not created in list settings
    Any idea what I am missing here?

  • Inbound Idoc - control record settings

    Hi,
    we have a JDBC to Idoc scenario. We get data from JDBC interface (outbound), map some fields and send it to a receiver SAP system as an Idoc (inbound). We did a similar scenario before and PI filled out automatically the control record settings. So in our mapping to the idoc XML format the must fieds in the control records are set to constant="pi dummy entry".
    It worked for the former scenario well. For this new scenario it doesn't! When i monitor the payload, SNDPOR as example is set with our dummy value of the mapping ("pi dummy entry").
    specials:
    - CC checkbox "Apply Control Values from Payload" is NOT set!
    - The destination SAP Business System is configured as a Party in Integration Directory (not such configurations in SLD)
    - We use PI 7.0
    Any suggestions?
    Thanks in advance
    Michael

    Hi Michael,
    >>So the control record will not be send. I was expecting, that PI the control record data according to the configuration fills. Maybe this is a wrong assumption.
    Yes you need to disable the control record in message mapping, because you want PI to make it at run time based on the configuration done in PI.  So apart from disabling it you need to do some more settings.
    If you have used parties in SAP PI, then select the
    1.Apply control records in IDOC communication channel
    2. Update the Identifier tab in the IDoc receiver channel with the correct information for sender/receiver
    now when you see the IDoc Outbound (in SOap Header) then you will see the correct sender and receiver details.
    Regards
    Suraj

Maybe you are looking for

  • Firefox will not start (platform version not compatible)

    After an automatic upgrade, Firefox no longer starts, giving an error of the form: "Error: Platform version '1.9.2.6' is not compatible with minVersion >= 1.9.2.7 maxVersion (LT)=1.9.2.7" I have seen several questions regarding this issue on this sit

  • Perl permissions

    For quite a time, I have a problem with perl on my system. I don't have the permissions to install or even execute perl scripts as a normal user. IMHO this shouldn't be the default behaviour, but I can't say when and where this changed on my computer

  • Concerned about losing 7 Express files when installing Logic 8

    Will my Logic Express 7 files be deleted or corrupted when I install Logic 8? From, "Before You Install Logic Studio": WARNING: If you have installed Logic Express or Logic Pro 7 on your computer, the Logic Studio installer will delete some of the fi

  • Excel is adding FirefoxHTML\Shell\Open\Command when I click on a hyperlink

    I added a hyperlink in an Excel document. When I click on it Firefox adds FirefoxHTML\Shell\Open\Command to the end of the string. How do I get it to stop?

  • Dblink for database 10G from database 8i

    I have created dblink with this syntax in database( 8i) to connect to database (10G) CREATE PUBLIC DATABASE LINK ORCL CONNECT TO SOUTH IDENTIFIED BY SOUTH USING 'ORCL'; Database link created no issue but when I am trying to connect to South schema in