In PS-CC, Brush diameter jumps from 508px to 1048px...

In PS-CC, the Brush diameter scale jumps from 508px to 1048px as I am dragging the slider. I have to type in a size I need above 508px whereas my older PS versions had a smooth scaler. Can I get back to the older PS brush slider?
Is there a setting I'm not seeing?

Are you sampling near the frame edge, and that is what you are seeing as a hard edge?
Does this edge follow the shape of the brush? What are you seeing in the Brush panel? You can use all the same brushes with the Clone tool as you can with the Brush tool, and some of those have weired and wonderful settings.
Are you using a mouse or tablet? Maybe something is set to Pen Pressure that is causing the issue.
What you see in the preview at the bottom of the brush panel is what you should get.

Similar Messages

I'm scared. Can you help? I can't jump from here to there.

Dear Apple MobileMe
I am very eager to make the move from MobileMe to iCloud, but...
As you can see from your own email, this is far from simple
My wife and I totally depend on my Macbook Pro (1), my old Powerbook that my wife uses (2), our iPhones (3 & 4), our iPad (5), my Time Machine, and my MobileMe (6), including Backups to our iDisk on MobileMe to keep our lives running.
iCal's synced across 6 Apple platforms
Address Books synced across 6 Apple platforms
Email synced across 6 Apple platforms (me using Mail and wife using AOL)
Bookmarks synced across 6 Apple platforms
Various apple ID's synced across 6 Apple platforms
You get the picture
I would hate to mess this delicately balanced Apple computer ecosystem up at all.
iOS 10.7 requires that I upgrade a bunch of my key work apps and figure out a way to transfer a 10 year dependence on Quicken onto some other equally robust financial management platform that doesn't seem to exist. Just to add insult to potential injury.
I'm scared.
Wish this whole process could be 500% more automated.
We've been on Macs and other Apple devices since 1987. I can't keep track of all of my "Apple ID's" for this and that that you've asked me to set up for each device and for each service over the years. Everything's registered with you.
Devices
MobileMe email aliases
iTunes
iDisk
App Store
AppleCare(s)
MobileMe
Apple.com support (here)
Apple ProCare
Apple iDisk Public folder
etc.
etc.
You should be able to gather all of my identities together into one place and figure out the best way to migrate me to the new Apple iCloud Garden of Eden.
You've got to find a way to help us work all this out. It's more than intimidating. We're frozen in fear. We just can't jump from here to there.
Steve
==================================================
On Dec 1, 2011, at 1:57 PM, MobileMe wrote:
iCloud is here Dear MobileMe member,
iCloud is here and you can now make the transition from MobileMe. You can move your
MobileMe mail, contacts, calendars, and bookmarks to iCloud, and keep your me.com and
mac.com email addresses. iCloud is a breakthrough set of free cloud services, including iTunes in the Cloud, Photo Stream
and Documents in the Cloud, that works seamlessly with your iPhone, iPad, iPod touch, Mac or
PC to store your content in iCloud and push it to all your devices. When content changes on one
device, all your other devices are updated automatically and wirelessly.
Making the Move
Before moving to iCloud, make sure that your iOS devices and computers have the required
software and your data is properly backed up by following these steps:
Get iTunes 10.5.
Download iTunes 10.5 to your Mac or PC.
Update your devices to iOS 5.
Update your iPhone, iPad and iPod touch to iOS 5 by connecting each
device to your Mac or PC and following the instructions in iTunes.
When you are asked to provide your Apple ID during iOS setup, use
your MobileMe email address and password.
Update your computers.Mac: Update to OS X Lion v10.7.2PC: Update to Windows 7 or Windows Vista Service Pack 2 andinstall the iCloud Control Panel for Windows.
Back up your MobileMe data.
For detailed instructions, review this article.
Verify your contacts and bookmarks.
Verify that your contacts and bookmarks are completely up to date on
at least one device you will use with iCloud. They will be uploaded to
iCloud from your devices after you move. iCloud will not copy any
contacts or bookmarks directly from me.com.
When you are ready, go to me.com/move and follow the instructions to move your account to
iCloud.
Important Notes
If your me.com or mac.com email address is used with more than one Apple ID, you may be
unable to access some iCloud services. If this occurs, you can remove duplicate email
addresses from your other Apple IDs by visiting My Apple ID. You can also use different Apple IDs for iCloud and your Store purchases (including iTunes,
App Store and iBookstore). For more information and detailed instructions, review this article. You can make the move from MobileMe to iCloud anytime between now and June 30, 2012. For
answers to some of the most common questions about the transition, see the MobileMe
transition FAQ. Sincerely,
Apple
iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer
with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is
required for accessing email, contacts and calendars). Some features require a Wi-Fi connection. Some features
are not available in all countries. Access to some services is limited to 10 devices. Previous purchases may be
unavailable if they are no longer in the iTunes Store, App Store, or iBookstore.
MobileMe is a service provided by Apple • Terms of Service • Privacy Policy
Copyright © 2011 Apple Inc. • 1 Infinite Loop, Cupertino, CA 95014
You are receiving this email from Apple to notify you of service information regarding your MobileMe account.

This is a user-to-user forum: you aren't talking to Apple here.
I do sympathize with your situation: you are among many for whom upgrading is impracticable, but who are dependent on MobileMe facilities which will be withdrawn next June.
As you say, you will need 10.7.2 to access iCloud on a Mac, and iOS5 for mobile devices.
I can't offer you any easy solutions, but this list may at least clarify the exact situation for you:
Your email, calendars, contacts and bookmarks, and 'Find my iPhone' will be migrated to iCloud.
Your iDisk, together with website hosting and Gallery. will continue to work as before until next June.
You will be able to access email, calendar and contacts on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is).

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use

try restart
http://support.apple.com/kb/HT1430

Jump from alv report to qa03 screen based on PRUEFLOS field

Hi experts,
I developed one alv report ,in that one field name is PRUEFLOS (inspection lot number).I want to jump from alv report
to QA03 screen based on PRUEFLOS field.I wrote in this way but i didn't get.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SELFIELD-FIELDNAME.
    WHEN 'PRUEFLOS'.
      READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
      SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
      CALL TRANSACTION 'QA03'   AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
what is the problem ?pls help me in this.

Hi Ram,
Recheck:
1) You have passed 'FORM USER_COMMAND' in 'I_CALLBACK_USER_COMMAND' while calling f.m. for ALV displa, and
2) You have checked the value of user command, i.e.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SY-UCOMM.
WHEN '&IC1'.
CASE SELFIELD-FIELDNAME.
WHEN 'PRUEFLOS'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
CALL TRANSACTION 'QA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDCASE.
ENDFORM.
Regards,
Birendra

Jump from alv report to cor2 screen

Hi experts,
I develop one alv report ..i want to jump from alv report to COR2 screen when click on order number(field name is AUFNR).
i wrote code in this way.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD
CASE SELFIELD-FIELDNAME.
    WHEN 'AUFNR'.
      READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
      SET PARAMETER ID 'AUF' FIELD T_FINAL-AUFNR.
      CALL TRANSACTION 'COR2'   AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
but it is not working properly,when u click on any order number it is going only the same order number(in cor2 screen).
what is the problem? set par id (AUF) EXIST IN TPARA table compulsalory or it is created automatically?
pls help me in this . If possible pls send the code.

Hi,
I have already mentioned both ways, but ok, once again.
A. how I found parameter ID ANR:
1.) run transaction COR2
2.) set cursor to field "Process order"
3.) press F1 button
4.) performance assistant displays
5.) press "Technical Information"
6.) technical information displays
7.) in field "Parameter ID" you can see parameter ID assigned to a screen field
B. how I found parameter ID BR1:
1.) switch on debugger
2.) run transaction COR2
3.) put a breakpoint on "GET PARAMETER" statement
4.) debugger stops on every GET PARAMETER statement in PBO of COR2
5.) there you can see that BR1 is used for field AUFNR
Basically first mentioned way is sufficient, because system gets parameter value from parameter ID assigned to a screen element automatically. But in this case a value is overwritten by coding in PBO of COR2.
Hope it helps.
Regrds,
Adrian

Asking for login details jumping from BW to SS report at Portal site

Hi Guys
Our BW reports are avilable from protal for user's.
Now the issue we are facing is when we jump from BW report to source system(SRM) report, it is aksing for login details for source system. where as at portal site it should not ask for login deatils. And we are facing this issue only in QA system and not PRD system.
M not sure where things are going wrong. I have checked SSO. nothing seems to be wrong here also.
Thanks & Regards,
Rohini

Hi Rohini,
I may not be correct. But does the user id which you are using (both in QA & Prod) have same settings for User-Type (<i>SU01 -> Logon Data -> User Type</i>). ?
Also u can check the RFC Settings (SM59).
Hope it would help..
Regards,
Vikrant.

How can I jump from Safari window to Safari window?

Hey all,
How does one jump from one Safari window to another? While Im at it, also from Tab to Tab?
On Window to Window in WinXP, I would use Command/Tab. However, in OSX, if I Command/Tab, then I get a different program list other then available, open Safari windows.
When in a single Safari window and have multiple tabs, to go from Tab to Tab, in Windows, you use Control/Tab. But in OSX, this does not work. I have tried variations to see if I could figure it out, but have been unsuccessful. Many thanks for any help and input.
LH

Command + ` is a system-wide function to toggle between open windows within any running app. Works for everything.
In Safari 4 and 5, ShiftCommand (right or left) arrow moves tabs for me. I noticed that in Apple Discussions, should I have a "reply box" open, this copmmand will go to the that tab and stay there, highlighting text. Otherwise the combo wrks fine.

The Jump from Snow Leopard to free Mavericks OS broke my iPhoto..

I updated my macbook pro today. I jumped straight from Snow Leopard to Mavericks. It was just like installing a really big app from the app store. However, it left iPhoto in the weeds of incompatibility. It was the latest version supported by Snow leopard and compatibilty instructions from Apple said I my computer met the requirements for the updated OS. Now my iPhoto has a big white circle with a line through it indicating that this version of iPhoto is not supported on the new OS. I cannot even view my pictures folder since it is in this broken iPhoto folder. Talked to Apple iPhoto specialist and he was super cool and checked with superviser but came to the conclusion that there is no conclusion at this moment. Day 1 downloaders should always consider this risk. I was just excited after seeing todays keynote and went for it on the macbook pro. This is what we both concluded..
The suite of apps in iLife and iWork were usually purchased via physical disk or preinstalled when purchasing a Mac a couple years ago. So there is no update for these in the app store (the new way of obtaining and updating software). This was a bit of an oversight in todays launch of new products. I was instructed to wait a few days and see if there is a "patch" for this error of compatibility. I can be patient and wait for this, but if there is no patch... Then I am in a great deal of trouble with my Wife! Lol seriously, she had a bunch of our wedding, honeymoon, and newborn daughter pics on this laptop and I foolishly updated without backing up. To my credit, I did my homework and learned that it "should" leave all my content as is. It is like the IOS updates that just overlay the software and replace only os stuff. This was true. Everything is exactly where it was before, only I cannot access the pictures, open iPhoto, update iMovie (it prompts that there is an update, but takes you to the app store updates page and it is not there). Basically at this point, I have to re-buy iLife and iWork because my versions are too old for the operating system released today. This would be fine if I was informed that my paid apps would need to be re-bought, but Apple stated that my device was compatible and this would be a simple update much like any other app. I also have extended apple care protection for our products, but the apple support guy said that store support will not have a fix at this time either. I suggested to take note of this particular issue because anyone who jumps from Snow Leopard to Mavericks may likely face this issue. I suggested that they offer a patch for the mistake or offer a free iphoto download (or other native app that broke in the process).
Other than my iLife and iWork apps not making a clean jump to the new OS, I really like the features and fluidity of the system. Apple makes high-quality products and innovates. I am not upset at all. Just a bit frightened because if I lost these photos and videos, you are reading a dead mans words.
Any thoughts or suggestions are much appreciated.

The same thing happened to me, since I have iPhoto 9.2.3
There is some kind of "direct access" to your original photos:
/Users/[your user name here]/Pictures/iPhoto Library/Masters
All pictures should be saved there, organized by year...
iPhoto will still not work but at least you can recover your photos.

Transferring saved workspaces, brushes, scripts, etc. from CS6 to CC on a PC using Windows 7

This is what I came up with...
Transfer saved workspaces, brushes, scripts, etc. from CS6 (Indesign, Illustrator and Photoshop) to CC on a PC using Windows 7.
Go to start menu < computer < (OS) C: drive < documents and settings* < user (your user name) < application data** < adobe < adobe illustrator (or adobe photoshop)***
*To see the ‘documents and settings’ folder, I had to go to start menu < control panel < folder options – select view tab – uncheck hide protected operating system files (recommended). The computer will prompt you to go ahead, say ‘yes’ then hit apply.
** There is another folder above ‘application data’ named ‘appdata’, this is not the correct folder.
* & ** I could not access these folders no matter what user settings I selected or logged in as administrator. I did an internet search and found the following successful:
If the the folder denies you access to share… right click on the folder < select properties < select the ‘security’ tab < click the ‘edit’ button < select any and all users named ‘everyone’ < select ‘remove’
After I removed the ‘everyone’ users, I was able to successfully share the folder to my user and access.
*** I did not have an ‘adobe indesign’ folder, scrolling down the list it was labeled just as ‘indesign’. So was ‘bridge’, ‘dreamweaver’, etc.
INDESIGN: Below are my exact paths for my particular system:
< adobe < Indesign (inside this folder I have three folders: Version 7.0, Version 8.0 and Version 9.0 – which correlates? to CS5, CS6 and CC.) < Version 8.0 < en_US < Workspaces (inside this folder I have two files of each workspace – for example named: ‘xyz.xml’ and ‘xyz_CurrentWorkspace.xml’, I don’t why there are two similarly named files??, so I copied both and pasted both (and it worked.)
< copy the workspaces you want to bring into CC
>Go back, to the Indesign folder and then to < Version 9.0 < en_US < Workspaces and paste the workspaces.
I did the same for scripts: copied from the Version 8.0 folder to the Version 9.0 folder *Please note that, with updated versions, your scripts may not work…
< Version 8.0 < en_US < scripts < scripts panel (copy scripts.)
You can do the same for Greps, Glyphs, Find/Change, etc.
I copied entire folders over from the en_US folders: ‘Indesign Shortcut Sets’ and ‘Glyph sets’
PHOTOSHOP: Below are my exact paths for my particular system: * please note I also have a ‘photoshop’ folder in the ‘adobe’ folder, which did not have what I was looking for to carry over.
< adobe < adobe photoshop CS6 < adobe photoshop CS6 settings – copy all files < go back to adobe < adobe photoshop CC < adobe photoshop CC settings – paste all files

To turn off UAC, go to the Control Panel, then User Accounts.
Under the header, "Make changes to your user account", there is an entry titled "Change User Account Control Settings".
Pick it, and drag the slider all the way down to "Never Notify".
Access of Japan is the company Palm hired to write Palm Desktop 6.2.2.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Big jump from G3 iMac to G5 Dual!

I'm buying a secondhand (fairly new) G5 Dual to replace my old iMac 400DV (OS 9.2.2).
I have questions:
What should I look for in the way of problems, apart from pixel deaths?
Will I be able to install my 9.2.2 applications?
Will the G5 be able to read my CD reference originated on the G3?
Anything I particularly need to know?
The most pressing question is - how I pay for it?
Thanks in advance for any assistance.
If you would kindly reply in a way which is understandable by a technophobe, I would be most grateful!

I'm buying a secondhand (fairly new) G5 Dual to replace my old iMac 400DV (OS 9.2.2).
What sort of G5? What's the price? What's the specs of the machine and video card? What are you going to use it for? Want to 3D game or not?
Some are better than others and the Dual series are about to be obsolete, they are over 3 years old already and most of the rest of the new Mac consumer line are already Intel based Dual core processors.
What should I look for in the way of problems, apart from pixel deaths?
Pixel deaths only apply to monitors. But the Dual PowerMac G5 series (not the Quad) suffer from a beeping power supply. Sometimes it can be remedied with installing Tigers' developers tools and Processor Preference pane (turn off Nap Mode)
Depending upon which PowerMac your getting, depends upon what sort of PCI cards, video cards you can upgrade to.
Will I be able to install my 9.2.2 applications?
I still think Tiger will allow the installation of Classic environment which is needed to run Classic applications. The problem of course is the apps OS 9 based installer disks might not run in Classic. Then there is copy protection schemes that might need installation directly from the apps disks, which might not work. Font and printing problems, trouble with connecting scanners and driver software is common with Classic. Most just switch to Mac OS X, it's easier.
Will the G5 be able to read my CD reference originated on the G3?
Yes, if you mean files and not a app installation disk of some sort.
Anything I particularly need to know?
Yes tons.
The best way to go to Mac OS X is directly, with all new apps, etc. Bouncing back and forth in Classic while your trying to learn Mac OS X on the same machine is not going to be fun, you won't know what's right or wrong. Use your older Mac for OS 9 until your completely up on the new machine. Use the older Mac for connections to old scanners and whatnot. Is my recommendation.
Also since your making such a great leap, perhaps you should wait until the Intel processor PowerMacs (Mac Pro's we think it will be called) and Mac OS 10.5 arrives (aka: "leopard") sometime this year.
This way you jump from a old OS and old processor type to a new OS and a new processor type in one stop. Without wasting money on software or software upgrades.
Read this link carefully.
http://appleintelfaq.com/
The most pressing question is - how I pay for it?
Well if you don't have money or credit...
Your really behind in the times, may I suggest you do some online reading at various Mac websites so you can get up to date with the latest information to make better decisions.
http://mac.zicos.com/

Warning message on jump from a BI report

On jump from a BI report to another (from any characteristic or key figure), following warning message comes up in the second report "Source selection for 0FISCPER incompatible for target selection". This is user specific, not all users are getting this message. It is not an authorization issue. Please provide your thoughafter and soughtafter suggestions.
Edited by: Suprabhat99 on May 18, 2011 3:23 PM

Hi Suprabhat,
Please check if all the Query restrictions like variables,selection options,interval,hierarchy etc is same for Source and Target Query for that paticular char - 0FISCPER.
Then Incase there is no discrepancy in above types then please check SAP note 1265027:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323635303237%7d
Also below forum should help resolve your issue :
Re: Jump Query
Regards,
Akanksha

I have jumped from 5.1 to CC. When I open a file originated in illustrator 5.1 in CC it changes the CMYK breakdown. Have tried colour setting changes in Bridge but still have differences. Help!

I have jumped from 5.1 to CC. When I open a file originated in illustrator 5.1 in CC it changes the CMYK breakdown. Have tried colour setting changes in Bridge but still have differences. Help!

Any warnings when opening the file?
You might need to reset all warnings in preferences.
Apart from that itlooks like your color management settings are set to convert into profile. This is absolutely not advisable.

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???
my iphone is now just coverd with case and the back house is crased

Etisalat, Mobinil and Vodafone provide warranty service in your country. You can also search Google for a 3rd party repair shop near you.

My ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

my ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

Likley a defective touchscreen.

TS3899 I just switched to Iphone 5c from Blackberry...is there a way to jump from the 1st email listed to the bottom of the list (sometimes 300-400) without scrolling manually thru them all? Also is there a way to organize them by sender?

I just switched to Iphone 5c from Blackberry...is there a way to jump from the 1st email listed to the bottom of the list (sometimes 300-400) without scrolling manually thru them all? Also is there a way to organize them by sender?

Well, I think I know why the rules are not working. The alias mailbox is being listed as another mail folder and not as an actual inbox so the rules are not being applied. While I wish the rules would work, I will continue to manually mark some of the emails as spam.
As for the second issue with emails vanishing, I am waiting to see if it happens again. I think it must happen when it is syncing the data but I am not sure that it happens all the time. Today the previous emails seem to be their and it grabbed the new email so I don't know what happened with the vanishing email. Anyway this can be closed since I believe the main issue has been solved as being a setup issue with Yahoo alias email account.

In PS-CC, Brush diameter jumps from 508px to 1048px...

Similar Messages

Maybe you are looking for