In psa maintence request update

I
HI ,
n psa maintence request update " request not updated into data target using delta "
In development it is showing as " request updated in target "
can please tell me the difference
Regards
shekar reddy

Hi Sriram,
This status is shown because the delta load based on this Data source in BW system has not extracted the data from this request.
Simply check the upward flow for your data source and execute the delta DTP or Infopackage so as to load data further in targets. Once you load data the request status will change automatically.
Regards,
Durgesh.

Similar Messages

PSA showing Request not updated to any data target using delta

Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
Manish

Reg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help

PSA request updated to data targets but not showing

Hi All,
It must be a basic question for BW support activities. However appreciate if someone can help me out as I am unable to find similar post.
In PSA the request shows it successfully updated to a data target but I can't see the delta request in the data target (Cube)- Manage.
This is a delta request. Can someone tell me how do I load the data back in to the cube? Do I need to delete the request from cube and run it again but I guess the deltas will be lost.
Help. pls give me all the steps in detail how do I fix this.
Thanks,
B

Hi,
There are two options.
1. at PSA find how many records are exist for your request.
Note/down load the records into excel if you have countable. As my guess delta records might be less.
Later thru repair full request you can load to PSA and then to target.
AT repair full request we need to use proper selections to load required records only.
2. PSA Request must be stored at back end table.
in that table if we can change update further status then we can do the psa request to target thru delta dtp.
Thanks

PSA still not updated to target!

Hi All,
I see some weird thing in PSA. I dont know why all PSA's since last June..still says not updated to TARGET which is still in RED request.
Whereas I can see my PSA request with RED MARK...although my data is updated in TARGET..
Anyone has an idea why??

Hi,
If load to data target is successful, then PSA load Status will be turned as green (tick mark) for column request updated. In some cases, if request is not updated to data target or any error in loading to data target. Then request updated column will be displayed with red exclamation mark.
Please reconcile your data target against PSA level periodic loads.
Thanks,
Manikandan Dhanakoti
Edited by: Manikandan D on Jan 17, 2012 10:44 AM

Does invoice correction request updates inventory?

I am creating a new invoice correction document type which has a Debit Memo instead of Credit Memo (standard) subsequently, now my question if there is a correction in quantity - DOES THE INVOICE CORRECTION REQUEST UPDATES THE INVENTORY?

Hi,
Absolutely yes, as long as the invoice correction is related to the quantity, it must affect the stock value in SAP system.
BR
Tao

Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

ITunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

Com.adobe.ProcessingException: Requested update ZCI-003 could not be found.

Hi
Please assist with the following ADS call error as per webdynpro application dump for an adobe interactive form.
The dump happens on drop downs and buttons on the form. The ADS is on Netweaver 7.01 EHP1. The layout on the form is ZCI but the script has not been manually inserted. The form works perfectly on the Development and QA environments but dumps in production with the error below.
WebDynpro Exception: ADS call failed ADS: com.adobe.ProcessingException:
com.adobe.ProcessingException: Requested update ZCI-003 could not be
found.(200,101).
Kind Regards,
Michael Mayisana.

Hi Michael,
Seems the ADS is working fine for non-interactive forms but the problem persists for interactive forms only.
As per my understanding a separate license or credential file for Interactive forms is required to be configured at ADS level by your basis team.
Check report: FP_TEST_00 and FP_TEST_IA_01.
Report FP_TEST_IA_01 should be working fine if you want to run ADS to generate interactive forms.
Please check with your basis team if credential is the issue.
Regards,
Vaibhav

ISupport - Service Request Update page Progress section

Hi folks,
iSupport 11.5.10.2
On iSupport's Service Request Update page (IBU_CF_SR_190_G), is there any way in the Progress section to display only certain kinds of information? For example, right now, Progress section displays Notes, Status Changes, Severity Changes etc. Is there a way to display, say, only Notes?
Kind Regards.

Steps to do the configuration:
1.Login to EBS
2.Select the Application Developer Common Modules Responsibility.
3.Selct the Region Function.
4.Query for IBU_CF_SR_DTL_PROGRESS_TABLE region.
5. Using this region you should be able to enable only Notes to show up in the progress region.

Request update PyQT to 4.4.4

I don't know whether this is the correct place to request update of PyQT to 4.4.4.
Tried to build my own PyQT due to synce-kpm issue.
Looks like the download URL in PKGBUILD is outdated. PyQT has been upgraded to 4.4.4.
To the developer/TU who is building this package. Please install dbus-python before building PyQT 4.4.4 so that
/usr/lib/python2.6/site-packages/dbus/mainloop/qt.so is generated so that synce-kpm can work correctly.
The makefile generate some error listed below.
install: cannot create regular file `/usr/lib/qt/plugins/designer/libpythonplugin.so': Permission denied
make[1]: [install_target] Error 1 (ignored)
strip --strip-unneeded "/usr/lib/qt/plugins/designer/libpythonplugin.so"
strip: '/usr/lib/qt/plugins/designer/libpythonplugin.so': No such file
make[1]: [install_target] Error 1 (ignored)
cp -f -r /home/xxxx/WIP/pyqt/src/PyQt-x11-gpl-4.4.4/designer/python /usr/lib/qt/plugins/designer/
cp: cannot create directory `/usr/lib/qt/plugins/designer/python': Permission denied
I don't know whether the error has any impact on my pc.

I'm pretty sure there is a bug report about the dbus-python thing and the package is flagged out of date so it should get updated soon. If not, a polite email to the maintainer might help you.
The make errors look like there files are ingnoring the install prefix for some reason.

Only PSA with the 'Update subsequently in data targets'- BI 7.0

Hello friends,
We are currently on BI7.0 and my concern is with the InfoPackage Processing of 'Only PSA' with the 'Update subsequently in data targets'checked. When I load the data it loads into the PSA and I can see it in the monitor and in the Manage of the DSO it shows me Transferred '328' and Added Record '0'/. How do I manually update it from the PSA into the data target from this point?
When I select 'PSA and then into Data Targets (package by package)' in the DSO manage screen it shows me Transferred 328 and Added Record '123'. So certainly that means that the data is not being subsequently loaded from the PSA when 'Only PSA' with the 'Update subsequently in data targets'checked option is used. Please tell me how to update data from PSA into Data Target when 'Only PSA' with the 'Update subsequently in data targets'checked is selected.
Many thanks.

Hi,
In BW 3.x data flow, 'Only PSA' with the 'Update subsequently in data targets' option in Info package will load up to PSA only in case of the Process chains.
After this info package we must add the additional step "Update from PSA to Target" in order to load to the target.
Hope this will fix ur issue.

Request or Request update is not correct

Hello All,
when iam ruuning a process chain iam getting error as Request or Request update is not correct at ODS activation.can anybody tell me what is this error and what is solution for this.
Regards
Priya

Hi Priya,
Check the request in the ODS to ensure the request is successfully loaded and try to activate it manually. If you still get an error let me know the error message as there could be several reasons depending on the error message.
Shilpa

HT4623 After requesting updates for several apps on my ipad 2, yesterday, the screen image of the app continues to say "waiting." Each app is stuck in waiting mode. help

Yesterday, I was updating several apps in the app updates section in the app store icon. I requested update for Facebook and two other apps. Now those apps are stuck or frozen. Under the icon on the screen it says, "waiting." On the store app page screen, it says, "instaling." I cannot get into either of those apps. What do I need to do to unfreeze my facebook and the other app? Thanks, gracefromok

If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

TS1702 After requesting updates for several apps on my ipad 2, yesterday, the screen image of the app continues to say "waiting." Each app is stuck in waiting mode. help

Yesterday, I was updating several apps in the app updates section in the app store icon. I requested update for Facebook and two other apps. Now those apps are stuck or frozen. Under the icon on the screen it says, "waiting." On the store app page screen, it says, "instaling." I cannot get into either of those apps. What do I need to do to unfreez

Restart your devise.

Error in psa level - Request not updated to any data target using delta

Hi,
This is pavan and am facing this issue any one know for below issue to solve.
Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come
to psa level but from here it is not updated to infocube so for that i have tried update manually
it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
Regards,
Pavan Kumar

Hi Pavan Kumar ,
Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
and you will get monitor for that request then change the QM status to red after that load new request .
Thanks
Hanumanthu

In psa maintence request update

Similar Messages

Maybe you are looking for