In PSE 13, when I open a folder, jpeg files have a preview image, but PSD, DNG and CR2 files don't. Also, no thumbnail below the file list.
Working in PSE 13, when I open a folder, jpeg files have a preview image, but psd files just have white sheet of paper as preview. I have to open the file to be able to see it. Also, there is no thumbnail of the file below the file list.Surely, there's a setting that needs to be changed. I did not have this problem with Elements 12. This is a real bother because I have to use Lightroom to see all the file types. It seems as if Elements is using the standard Windows file loader that can't show previews of file types it doesn't know including .PSD, DNG and CR2. Is that a bug or did I do something wrong? Thanks for any help.
I am using Windows 7 64 bits. Working in the editor, I never use the organizer. The screen above is not the same at all that I got in Elements 12, it was completely different and showed me a thumbnail below the listing when I single clicked on one of the files. In Elements 12, I also could see a thumbnail of all the file types, not only the jpegs. It is as if the loader is the regular Windows used anywhere, not the right one for Elements. I hope someone understands my problem.. Thanks.
Mike
Similar Messages
-
The title says it all.
I am using Windows 7 64 bits. Working in the editor, I never use the organizer. The screen above is not the same at all that I got in Elements 12, it was completely different and showed me a thumbnail below the listing when I single clicked on one of the files. In Elements 12, I also could see a thumbnail of all the file types, not only the jpegs. It is as if the loader is the regular Windows used anywhere, not the right one for Elements. I hope someone understands my problem.. Thanks.
Mike -
When I open aperture a pop up appears that tells me that my mobil me photos will be moved. When I click OK, nothing happens and I have left it for hours. I can not get rid of the pop up and I can not get out of aperture. I have to force the computer to shut down. Any thoughts?
Quit Aperture - force quit if necessary (or try this:
If Aperture is unresponsive, how to avoid force quitting?
Launch Aperture again. When the panel appears, press the "Learn more" button, not o.k.
Then use the "File > Web Accounts > Manage Web Accounts" menu entry from Aperture's main menu bar and remove "MobileMe" from the list of accounts in the accounts pane by pressing "-".
If the above does not work, disconnect the internet (Wi-fi, Ethernet, whatever you have), before you launch Aperture again. Now the panel should no longer appear.
Also sign out of MobileMe in the System Preferences Mobile Me tab, to stop the panel to appear again.
Good luck
Léonie -
When I open a folder on my mac pro retina osx 10.9.1 then a document every time I close the document it closes the folder where is the back button?
Try COMMAND-[.
Ciao. -
hey, im really sick of this, how can i open folders but in the same windows, when i open a folder which is inside of another one, it just open me a new window, its so annoying, could anyone tell me what to do? im using mac os 10.7.2
Finder > Preferences > General > Always open folders in a new window: uncheck
-
My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.
Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks. -
hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
-
Hi I have an ipod shuffle which worked well on my old pc but since i have tried to link it with my new laptop I cant get it to sinc. I have athorised the device to my laptop so i thought it maybe worth resetting it but all the info I have read tells me that to reset my ipod i need to open i tunes and on the left hand side in the 'source panel' i will find my ipod listed but when i open itunes i do not have a source panel so i cant reset it. i have spent days trying to get this problem sorted and am about to throw the thing away. I have tried to manually sinc the thing, i have installed and reinstalled the latest version of itunes, i have restarted my laptop but i dont know what to do next. any help would be very much appreciated. Many thanks in advance
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
ChrisI could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings -
The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.
I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow. -
When I open a music in itunes got a message "connecting to apple tv" and got no sound from my mac
When I open a music in itunes got a message "connecting to apple tv" and got no sound from my mac.
AirPlay isn't anything to do with homesharing. (Home sharing lets you share the iTunes libraries on computers)
Basic AirPlay: Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
Mirroring: When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device. -
Hallo.
My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help?
ThanksDid you also read that same link you provided and see this "With iTunes 10.3 or later and iOS 4.3.3 or later, "?
Iphone 3G does not support ios 4.3 -
hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal? there is a green light next to the camera when im on photobooth/facetime,...
Just do a restart. It seems to clear it up.
-
I was importing photos to iphoto and somehow lost access to my iTunes library. when i open iPhoto, it asks me to select a library, but there are no photo libraries present for me to select. I cant find my pictures and have no access to my iPhoto.
somehow lost access to my iTunes library.
What does iTunes have to do with this? Also more specific information might be helpful.
What system and iPhoto versions are you running?
Where are you being asked to select a library? What kind of library, iPhoto or iTunes?
What do you see when you first launch iPhoto?
OT -
When I opened internet explorer, Internet explorer erased all my internet addresses off foxfire and put them on internet explorer. How do I import all my email addresses off of internet explorer and put them back on foxfire. Mary
Hi mary200077,
So you are saying all of your favorites are in IE but not in Firefox? Don't worry, that's an easy fix! Just take a look at the [[Importing favorites and other data from Internet Explorer]] and you'll be set! Post back here if you have any issues.
Hopefully this helps!
Maybe you are looking for
-
Has anyone successfully synched their MacBook Pro with a Samsung internet-ready ("Smart") TV? Samsung has software called "AllShare" which I was able to download to my Dell PC, but it doesn't seem to be available for Mac. (I am a new Mac owner/user.)
-
CREATING TUTORIALS PAGES USING CMD.EXE AS THE VIEWER.
Hello all. I apologize in advance if this question comes off as ignorant to any of you but, I'm pretty new at scripting.., having a lot of fun with it so i'm barreling ahead! I've been combining all the hundreds of tutorials text files that I have be
-
Error: The XML parser encountered an error in your deployment descriptor. P
Hi, I am very new to weblogi. I wrote a ejb in eclipse with xDoclet. When I deploy the ejb, Im getting this error: <b>Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 5 Module: SessionLessEjb Error: [EJB:011025]The XML pa
-
Monitoring user's transactions
Hi, I work in a department mainly uses purchasing, procurement, inventory and warehousing modules. We have identified responsibilities that are in conflict with each and will usually not grant conflicting ones to users when they ask for them. However
-
Soundblaster X-Fi Titanium Optical Out not working???
Hey friends, I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via th