In pse8 ctrl H accesses ps3, not ps5

i like pse for cataloging and am used to just hitting ctrl H to have an image open in photoshop for editing.
i recently added ps 5, and i cant find a way to get pse8 to access ps 5 rather than ps3.
can anyone help--short of uninstalling ps3?

I have never gotten the edit in photoshop to work properly in the
elements 8 organizer. I have the same problems you describe and while
there might be an easy solution, i haven't found one.
In the elements 7 and 9 organizers, everthing works fine as far as
the edit in photoshop function goes.
Since you say you have not activated elements 8, does that mean
you just wanted elements for the organizer?
You might do just as well downloading the pse9 trial and see if
it works any better, which for me it does. The elements 9 version
even opens camera raw files with the dialog into cs5, unlike previous
versions of the organizer.
MTSTUNER

Similar Messages

Could not Save As because write access was not granted

I get an Error Message every time I try to Save As my Image after working with them on my iMac why?
here the Message I get it: Could not Save As because write access was not granted,I try both JPG & PSD.Thanks

You could start by repairing permissions with Disk Utility and go over the usual trouble-shooting routines (trashing prefs by keeping ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance etc.)?
Edit: Of course you could also manually check the permissions for the file, the folder, the folder the folder resides in etc. (File > Get Info in the Finder).
And just to make sure: You are saving to a local volume and not across a network?

Could not save because write access was not granted.

Hi
I use lightroom 4 whit photoshop CS6 when I send any file from my NAS server whit LR4 to PS6 when I want save it take "Could not save because write access was not granted" .
But I didn't have this problem whit LR3.6 and PS5.
I use mac os x 10.7.4

This always happens to me on the NAS on LR3 and LR4. If the file is local, no problem. But on the NAS it has issues with permissions. For me it says the file is in use and can't be overwritten. I'm trying a new drive today with a differnet filesystem (HFS+). Maybe that will work better.

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

[LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
See the above post for more information - here's a synopsis:
CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
Any ideas?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

X. wrote:
Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
Any news on that?
@mellroth figured out the solution :-)
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.

Recently installed Service Pack 1 in SharePoint Server 2013 Farm, post upgrade we are experiencing issue when opening visio documents:
I am trying to open .vsdx (visio 2013) file but encounter following issue:
Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.
Under Document library-->Library settings-->Advanced Settings
Still I cant open file in browser as we always used to. Unfortunately we don't have Visio services in Farm.
can you share your experiences regarding this issue post Sp1 SharePoint Server 2013.
Thank You

Hi Octopus,
Based on the error message, it seems that the Visio Graphics Service is not started or the Enterprise feature is not enabled.
I recommend to check the things below:
Go to Central Administration > System Settings > Manage service on server > check if the Visio Graphics Service is started > then click Application Management > Manage service applications > check if the Visio Graphics Service application
is created.
Go to the root site settings page of the site where you got this error, click Site collection features to check if the SharePoint Server Enterprise Site Collection Features is enabled.
Go to the site settings page of the site where you got this error, click Manage site feature to check if the SharePoint Server Enterprise Site Features is enabled.
More information about the Visio Graphics Service:
http://tutorial.programming4.us/windows_server/microsoft-sharepoint-2013---looking-at-visio-services-(part-3)---visio-graphics-service-service-application.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills. I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number. Please let me know as soon as possible so I can change passwords or anything that is needed.
thanks

If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
Barry

I can't access the "notes" on my Ipod Touch

I can't access my "notes" on my ipod, which is a fourth generation.
What happened, while deleting some notes, one came back up but as a blank note. when opening, it was still blank so I tries deleting it, but to no avail. So, I tried to delete it again, and the ipod shut itself out of "notes" on it's own. I've shut down the ipod several times and restarted it, but each time I try to reopen "notes" it shuts out of it immediately.
I don't want to restart my ipod because there are new notes that I haven't been able to sync to my apple account yet, and I'd rather not lose them.
If there is any other way to fix this, please let me know. I really need someone's help!!
Thanks!

If y go to iclud.com, sign in and go to Notes, are the notes there?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Backup and restore from backup. See:
iOS: How to back up

Error - Exclusive access could not be obtained because the database is in use

I am actually trying to make a script (in Sql Server 2008) to restore one database from one backup file. I made the following code and I am getting an error -
Msg 3101, Level 16, State 1, Line 3
Exclusive access could not be obtained because
the database is in use.
Msg 3013, Level 16, State 1, Line 3
RESTORE DATABASE is terminating abnormally.
How do I fix this problem ?
IF DB_ID('AdventureWorksDW') IS NOT NULL
BEGIN
RESTORE DATABASE [AdventureWorksDW]
FILE = N'AdventureWorksDW_Data'
FROM
DISK = N'C:\Program Files\Microsoft SQL Server\
MSSQL10_50.SS2008\MSSQL\Backup\AdventureWorksDW.bak'
WITH FILE = 1,
MOVE N'AdventureWorksDW_Data'
TO N'C:\Program Files\Microsoft SQL Server\
MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW.mdf',
MOVE N'AdventureWorksDW_Log'
TO N'C:\Program Files\Microsoft SQL Server\
MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW_0.LDF',
NOUNLOAD, STATS = 10
END

Check, if there are existing connections to the database you are restoring by following command
select spid from sys.sysprocesses where dbid = db_id('AdventureWorksDW')
if you see any existing connections then kill them by issuing KILL command Syntax for kill is
KILL <SPID>
once you see there are no more connections then
Use mastergoIF DB_ID('AdventureWorksDW') IS NOT NULL
BEGIN
RESTORE DATABASE [AdventureWorksDW]
FILE = N'AdventureWorksDW_Data'
FROM
DISK = N'C:\Program Files\Microsoft SQL Server\
MSSQL10_50.SS2008\MSSQL\Backup\AdventureWorksDW.bak'
WITH FILE = 1,
MOVE N'AdventureWorksDW_Data'
TO N'C:\Program Files\Microsoft SQL Server\
MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW.mdf',
MOVE N'AdventureWorksDW_Log'
TO N'C:\Program Files\Microsoft SQL Server\
MSSQL10_50.SS2008\MSSQL\DATA\AdventureWorksDW_0.LDF',
NOUNLOAD, STATS = 10
END
Mark as answer, if it works.

The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
   at System.Data.SqlClient.SqlConnection..ctor()
   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
   at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
   at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
   at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceInformation(String message)
   at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
   at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
   at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
      at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
   at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
   at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
   at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
    <behaviors>
      <serviceBehaviors>
        <behavior name="ServiceBehavior">
          <serviceMetadata httpGetEnabled="true"/>
          <serviceDebug includeExceptionDetailInFaults="false"/>
          <serviceAuthorization impersonateCallerForAllOperations="true"/>
        </behavior>
      </serviceBehaviors>
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
    </behaviors>
    <bindings>
      <wsHttpBinding>
        <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
          openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
          bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
          maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
          messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
          allowCookies="false">
          <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
            maxBytesPerRead="4096" maxNameTableCharCount="16384" />
          <reliableSession ordered="true" inactivityTimeout="00:10:00"
            enabled="false" />
          <security mode="Message">
            <transport clientCredentialType="Windows" proxyCredentialType="None"
              realm="" />
            <message clientCredentialType="Windows" negotiateServiceCredential="true"
              algorithmSuite="Default" />
          </security>
        </binding>
      </wsHttpBinding>
    </bindings>
        <client>
              <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                    bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                    name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
    </system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
    <configSections>
    <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
    <appSettings>
       
    </appSettings>
    
<connectionStrings>
    <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
    
    <FRB.Diagnostics>
        <sqlTraceListeners>
            <sqlTraceListener name="sqlTraceListenerSettings"
                        connectionStringName="log"
                        commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                        commandType="Text">
                <parameters>
                    <parameter name="@Source" propertyToken="{Source}"/>
                    <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                    <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                    <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                    <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                    <parameter name="@Message" propertyToken="{Message}"/>
                    <parameter name="@Timestamp" propertyToken="{DateTime}"/>
          
        </parameters>
            </sqlTraceListener>
        </sqlTraceListeners>
        <smtpTraceListeners>
            <smtpTraceListener name="smtpTraceListenerSettings"
                         host="vssmtp"
                         port="25"
                         from="[email protected]"
                         to="[email protected]"
                         subject="AdminService Logging Event: {EventType}, {MachineName}"
                         body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
        </smtpTraceListeners>
    </FRB.Diagnostics>
    
    <system.diagnostics>
        <sources>
            <source name="FRB.EC.AdminService" switchValue="All">
                <listeners>
                    <clear/>
                    <add name="ods"/>
                    <add name="smtp"/>
                    <add name="sql"/>
                </listeners>
            </source>
            <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                <listeners>
                    <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                </listeners>
            </source>
        </sources>
        <sharedListeners>
            
            <add name="ods"
           type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
           initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
            
            <add name="sql"
           type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
           initializeData="sqlTraceListenerSettings"
           traceOutputOptions="Timestamp"/>
            
            <add name="smtp"
           type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
           initializeData="smtpTraceListenerSettings">
                   <filter type="System.Diagnostics.EventTypeFilter"
                   initializeData="Error"/>
            </add>
        </sharedListeners>
        <trace autoflush="true"/>
    </system.diagnostics>
    <system.web>
    <compilation debug="true" targetFramework="4.0">
    </compilation>
        <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
    </system.web>
    <system.serviceModel>
        <services>
            <service name="FRB.EC.AdminService.AdminService"
               behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                
                <endpoint address="" binding="wsHttpBinding"
                  bindingConfiguration="wsHttpEndpointBinding"
                  contract="FRB.EC.AdminService.IAdminService">
                    
                    <identity>
                        <dns value="localhost"/>
                    </identity>
                </endpoint>
                <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
            </service>
        </services>
        <bindings>
            <wsHttpBinding>
                <binding name="wsHttpEndpointBinding"
                 maxBufferPoolSize="2147483647"
                 maxReceivedMessageSize="500000000">
                    <readerQuotas maxDepth="2147483647"
                        maxStringContentLength="2147483647"
                        maxArrayLength="2147483647"
                        maxBytesPerRead="2147483647"
                        maxNameTableCharCount="2147483647"/>
                    <security>
                        <message clientCredentialType="Windows"/>
                    </security>
                </binding>
            </wsHttpBinding>
        </bindings>
        <behaviors>
            <serviceBehaviors>
                <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="true"/>
                    <serviceCredentials>
                    </serviceCredentials>
                    
                    <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                impersonateCallerForAllOperations="true"/>
                </behavior>
                <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="false"/>
                    <serviceCredentials>
                        <clientCertificate>
                            <authentication certificateValidationMode="PeerTrust"/>
                            
                        </clientCertificate>
                        <serviceCertificate findValue="WCfServer"
                                storeLocation="LocalMachine"
                                storeName="My" x509FindType="FindBySubjectName"/>
                    </serviceCredentials>
                </behavior>
            </serviceBehaviors>
        </behaviors>
        <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
    </system.serviceModel>
    <system.webServer>
        <modules runAllManagedModulesForAllRequests="true"/>
    </system.webServer>
</configuration>
Thanks for any help.
Neal

I think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
            // Above is related to the WCFLOG SQL Diagnostics Trace
            // If you get error here an inner exception "requested registry access is not allowed"
            // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
            // then make sure you have impersonation enabled in your client.
            // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate ">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
        <client>
              <endpoint address="http://localhost:4998/AdminService.svc"
                              behaviorConfiguration="FRB.AllowImpersonate"
                              binding="wsHttpBinding"
                          bindingConfiguration="WSHttpBinding_IAdminService"
                             contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
        public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
            try
                _connection = new SqlConnection(connectionString);
                // Above is related to the WCFLOG SQL Diagnostics Trace
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
            catch (Exception ex)
                if (ex.ToString().Contains("The type initializer for"))
                throw new System.ApplicationException(@"
                Your client app <endpoint> must be cofigured have a
              'behaviorConfiguration' attribute like this:
                behaviorConfiguration='FRB.AllowImpersonate'
               that points back to a behavior that has this syntax:
          <behavior name='FRB.AllowImpersonate'>
             <clientCredentials>
                 <windows allowedImpersonationLevel='Impersonation'/>
             </clientCredentials>
          </behavior>
          ", ex);
               else
                    throw ex;
            _command = _connection.CreateCommand();
            _command.CommandText = commandText;
            _command.CommandType = commandType;
            // TODO _command.CommandTimeout = ;
Neal

Sharepoint and SSRS integration Error Requested registry access is not allowed.

I have integrated SSRS with sharepoint foundation 2010, it was running fine but suddenly its starts giving me error as -
"An unexpected error occurred while connecting to the report server. Verify that the Reporting Services Service Application mapped to this web application is available OR the report server is available
and configured for SharePoint Integrated mode. --> The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. --->
Microsoft.ReportingServices.Library.ReportServerDisabledException: The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted
content. ---> System.Security.SecurityException: Requested registry access is not allowed."
Now i am not able to read reports or cant access all database options in sharepoint,it says
registry access is not allowed
I tried to reset encryption key and allowed all access to registry keys buts its giving same error .
Please suggest me what should i do now, i stuck here...

Hi Bhagyashri,
From your description, there have two questions in the environment:
"Requested registry access is not allowed" while access SharePoint sites
and "The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database" while viewing reports
For the first issue, the cause is the SharePoint web service account can't access some registry keys.
For the second issue, the cause is that the report database was restored from another server, and the encryption key was not restored correctly.
To fix the issue, please:
Follow "solutions" in this article
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx to fix "Requested registry access is not allowed"
Restore the encryption key again, or please delete the key and then reset every credential setting in SSRS data source connection
Thanks,
Jinchun Chen
Jinchun Chen(JC)
TechNet Community Support

Operating unit access is not allowed.check that you have access to OU

Hello,
I am working on supplier conversion. 11i to R12 (Linux). Old DB is 9i and new is 11g. I am getting the below error when i am trying to upload supplier site
msg count2
Status E
Vendor site id
Party site id
Location id
return_status: E
l_msg_data:Operating unit access is not allowed. Please check that you have access to the operating unit: XXLABS Operating Unit, 100
l_msg_data:Operating Unit Info is null
we created a new org 100 and i am trying to create supplier sites in that ORG. We created a site to the supplier from front end but when i try from the back end i get this error. Below is the code
DECLARE
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_return_status VARCHAR2(10);
l_msg_count NUMBER;
l_msg_data VARCHAR2(1000);
l_vendor_site_id NUMBER;
l_party_site_id NUMBER;
l_location_id NUMBER;
l_msg_index_out NUMBER;
BEGIN
mo_global.set_policy_context('S',100);
SELECT vendor_id
INTO l_vendor_site_rec.vendor_id
FROM pos_po_vendors_v
WHERE vendor_ID = 3101;
l_vendor_site_rec.vendor_site_code := 'WOBURN_test';
l_vendor_site_rec.address_line1 := 'XX WEST PARK';
l_vendor_site_rec.city := 'WOBURN';
l_vendor_site_rec.state := 'MA';
l_vendor_site_rec.country := 'US';
l_vendor_site_rec.zip := '01801';
l_vendor_site_rec.org_id := 100;
pos_vendor_pub_pkg.create_vendor_site(
p_vendor_site_rec => l_vendor_site_rec,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_vendor_site_id => l_vendor_site_id,
x_party_site_id => l_party_site_id,
x_location_id => l_location_id);
COMMIT;
DBMS_OUTPUT.PUT_LINE ('msg count'||l_msg_count);
DBMS_OUTPUT.PUT_LINE ('Status '||l_return_status);
DBMS_OUTPUT.PUT_LINE ('Vendor site id '||l_vendor_site_id);
DBMS_OUTPUT.PUT_LINE ('Party site id '||l_party_site_id);
DBMS_OUTPUT.PUT_LINE ('Location id '||l_location_id);
dbms_output.put_line('return_status: '||l_return_status);
IF (l_return_status <> 'S') THEN
IF (l_msg_count > 0) THEN
FOR i IN 1..l_msg_count
LOOP
fnd_msg_pub.get
(p_msg_index => i,
p_data => l_msg_data,
p_encoded => 'F',
p_msg_index_out => l_msg_index_out
fnd_message.set_encoded(l_msg_data);
dbms_output.put_line('l_msg_data:'|| l_msg_data);
END LOOP;
end if;
END IF;
END;
Any ideas????

I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
I was deleting files trying to make space on my hard drive
What were you deleting?
and noticed as I was deleting files more data was being added to the iPhoto Library.
Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
I would really like to keep these pictures.
Make a back up now.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Could not save because write access was not granted+lightroom 4.2

Hi
I use Mac osx Lion and LR 4.2 & PS CS6 and a network atorage when open a file whit LR in PS after edit file don't save or save as whit orginal name in network storage and show "Could not save “...........” because write access was not granted" and I have to close LR save file in PS to network storage and reopen LR.
But when I send a file in LR whit Open finder to PS ans save to network storage evreything work ok but I have to do Sync again lightroom.
I think somethink don't work correct in LR .
Do evreybody have this problem?

Hi
when I send a file in LR 4.2 whit show in finder to PS CS6 everything is ok .

'Could not save because access was not granted'

I have just changed to iMac from a pc.
On the pc I had two LaCie external hard drives containing all my photos. When I connected them up to my Mac, all the photos were there and I was able to edit them but the problem arose when I tried to save them. When I tried to 'save or save as', even using a different file name I am getting the 'could not save because access was not granted' message. The same message pops up even when trying to save something generated in Photoshop and not taken from the external hard drive.
I went into Applications and Disk Utility but it appears the 'hard drives cannot be written to' and the SMART status is not supported, whatever that might mean!
Any help or suggestions would be greatly appreciated.

Hi, possibly your EHD need to be Mac formatted.
If you have formatted them right click on the Icon then select Get Info. On the very bottom of the Get Info window there is a section for Permissions. You need to Unlock (needs your password) and hit the + sign, from there choose YOUR name & Allow "Read Write" - See if that helps..
If the EHD are NOT Mac formatted you will need to transfer everything from one EHD to the other then format the empty drive:- Applications ->Utilities ->Disk Utility -> Hilite Erase (top of window) Mac Extended..After that send everything back to the Formatted drive & do the same to the second drive..Finally Repair Permissions on YOUR Mac Main HD & Verify Disk on the EHD's-after that All should be good..........L
Message was edited by: elmac

Alternate Access Mapping not working for Zone : Intranet

One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
is it possible?
subsequest to my previous question (
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
I want to ask one more question
Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
or
If there is ".com" within the url then it can't be configured for InTRAnet?
Thanks
S H A J A N

The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
http://intranet.domain.com and
http://intranet as an AAM, or vice versa.
You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

In pse8 ctrl H accesses ps3, not ps5

Similar Messages

Maybe you are looking for