In query ( * )asterisk sign is populating instead of values.

Hi,
In a Bex Query,i have currency & units in key figures(it is calculated Key Figure),output is populating as(*)instead of values for some records.Many records it is populating the correct value.I have tried Currency conversion also but all the currency are converting in to one currency...so output is not matching the task.
How to solve this issue?

If you are running your query on the Web, you can right-click on () and choose "Explain Key Figure" or something like this from pop-up menu. This should help you to find KFs causing your () value.
Regards,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/37289">vitaliy</a>

Similar Messages

  • Query on Creating and Populating I$ table on different condition

    Hi,
    I have a query on creating and populating I$ table on different condition.In which condition the I$ table is created??And These condition are mentioned below:
    1)*source and staging area* are on same server(i.e target is on another server)
    2)*staging area and Target* are on same server(i.e source is on another server)
    3)*source,staging area and Target* are on *3 different* server
    4)source,staging area and Target are on same server
    Thanks

    I am not very much clear about your question. Still trying my best to clear it out.
    In your all above requirement I$ table will be created.
    If staging same as target ( One database,one user) then all temp tables will be created under this user
    If staging is different than target ( One database,two user (A,B)) then all temp tables will be created under this user A (lets consider) and data will be inserted to the target table that is present in user B
    If staging is different than target ( Two database,two user (A1,A2), not recommended architecture) then all temp tables will be created under this user A1 (database A1) and data will be inserted to the target table that is present in user A2 (database A2)
    If source,staging,target will under one database then No LKM is required,IKM is sufficient to load the data into target. Specifically for this you can see one example given by Craig.
    http://s3.amazonaws.com/Ora/ODI-Simple_SELECT_and_INSERT-interface.swf
    Thanks.

  • When i leave my computer alone for a while and i'm signed into ichat, instead of it putting me to away like the settings are set to it just signs me off...how do i fix it? i want it to stay logged on until i sign out

    when i leave my computer alone for a while and i'm signed into ichat, instead of it putting me to away like the settings are set to it just signs me off...how do i fix it? i want it to stay logged on until i sign out

    Hi,
    This is mostly about what is called Away as a Status and setting an Away Status Message when going Idle.
    Idle happens when there has been no Keyboard or Mouse  input for 10 mins.
    (read as for any Input device like Trackpad, Graphics pad, Trackball etc)
    The Bottom section of the General Section of the iChat Preferences is abouut what happens when you go Idle.  (The Orange Arrow and Text in the pic Below)
    (Your Status indicator will go Amber)
    Some of this does depend if you have Set "Block others for Seeing me as Idle " in the Accounts section > Account Info Tab on AIM Logins.
    It is also linked to Fast User Switching (your Mac User Account could go Idle whilst you are Logged in as another Mac User Account).
    The Blue Arrow and Text points out you can make sure iChat stays at the Last Status (And Message) you used on Quit (The default is for this to be Ticked and iChat to  change to Available).
    The Red Arrow and Text is about whether you appear as Fully Off line on Quit and Sleep.
    On Quit iChat does not fully log you out of the AIM Servers.
    You will appear as Off Line to your Buddies but the AIM servers will keep Off Line Messages for you (well, if you have never replied "NO" to the first Off Line IM you ever got)
    However it does seem that in certain Combos of these settings that you can "Seen" by your Buddies as Away rather than Off line.
    Picture of General Section of Preferences
    If you add in to this mix a shorter time than the Idle time to make the  computer go to Sleep then you can also create other "states"  as well.
    So...
    In it's default settings:-
    1) iChat will always set you to Available on Launch.
    2) At 10 mins of no input you will go Idle (Amber)
    3) For Fast User Switching you can set iChat to go Off Line or to Go "Away" (A Status Message setting).
    (It has been so long I forget what the Default was)
    4) iChat is set by default to show you going Idle (See the Accounts section of the Preferences)
    5) If you specifically set an Away Status (or Message) then iChat will do whatever is set in the bottom part of the General Section.
    6) Sleep will put you Off Line and the "When I Quit iChat, Set My Status to Off Line" option will kick in
    The Default is for this to be Unticked.
    There is no setting to create going to Away if left alone.
    I am not entirely sure on this one though as I think it can be created via "Second Pass" things.
    Note:-
    Example of Second Pass.
    Go to the View Menu and the Sort Buddies option.
    If you sort by First Name then the Buddy list is likely to Reorganise itself based on the Address Book Entries.
    If you now Sort by Availability it will organise those First Names by Availability rather than reverting to what was set before.
    (Screen Names Only Buddies will appear alphabetically in any list)
    Now repeat by Sort by Last Name then Availability and you will see that the list is not in the same order as First Names and Availability.
    At this point I am not sure exactly what you meant.
    The Title bit implies that Sleep was/is getting in the way.
    The actual question details leave me wondering what you think you have set iChat to do ?
    8:40 PM      Friday; May 6, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Query from the data abse  and pass values to a pdf form

    query from the data abse and pass values to a pdf form
    Hello
    Hello i have this html report that i have written to output a
    report.
    now, i am assigned to pass the same fields to a pdf form so
    the fields in the adaobe form can be populated or the term
    Pre-populate the form.
    can anyone help me get started.
    first i would like to know if it can be done.
    second, what do i need to get started (tools )
    third how do i do this.
    i am really lost at this point.
    can anyone give me tips in how to approach this
    subject??

    It can be one using Adobe Acrobat Designer which is packaged
    with Acrobat
    Professional Pro 7. It uses all XML to create and populate
    forms.
    If you had the time, you can also create <cfdocument
    type="pdf"> to have
    them ready and just pass the info to it so it autogenerates
    the PDF on the
    fly.

  • In trace file and output file showing bind variable instead of value

    Hi,
    database 9i
    optimizer = choose(for cost based)
    In my trace file and output file showing bind variable instead of value.
    in my trace file 20 queries.
    I alse set this parameter in session level.
    alter session set events '10046 trace name context forever, level 4';
    but still showing traceoutput file bind variable.
    Pls help its very urgent

    Can you post the query for which the bind variable values are not being shown and the trace output for the same?
    Probably it is listed down somewhere when you actually executed the query among the others. Try completely analyzing your trace file..

  • Returning sql statement instead of values from database

    hi am reading value from database but my problem is am get sql statement values instead of values in database
    my code is
    java:337)

    There is no doubt: you get what you want:
        return s_getValue;
    bye
    TPD

  • Can the Ring Properties/Edit Items/Labels be populated by array values?

    Can the Ring Properties/Edit Items/Labels be populated by array values?
    I'm trying to troubleshoot an existing LabView 7.0 application at our office (this is only the beginning of my nightmare) and I'm finding that there is an array being created out of discrete Elements, which is then being indexed using the Indexed Array function, using a Ring control as the Index input. 
    What I'm seeing is that whoever created this "Appication" seems to require that any new 'elements' that need to be added to the array need to added in AT LEAST two locations (add the element to the array and add a label on the Edit Items tab of the Ring control used to index the array) and there may be more locations I haven't found that also needs the same information.  Since I can't see any way for the array and the ring control to 'compare' the text strings, I'm assuming the array is being indexed using the 'values' from the Edit Items tab.  Ths would allow different text in the Ring dropdown than is actually contained in the text of the array.
    This is contrary to most of the coding practices I've learned, so I'm wondering if I could use the text strings contained in the array itself to populate Item list in the Ring control?
    Later I can create an 'entry form' that would allow new parts to be added by staff that doesn't require knowledge of LabView programming. (The "Users" should NEVER have to see the underlying block diagrams/code to add or edit parts ot test parameter values.)
    Thanks

    In 8.2 you can do this with a property node and the "Strings [ ] Property".  It accepts an array of strings.  Order of strings in array sets the order in the control.  Should work in 7.0 as well.

  • Problem in SAP Query will displaing the curency and quentity values

    Hi Gurus,
    I had copied one query which is having  currency and quantity values and displaying  with out unit of measurement, And in my copied query i and able to see unit of measure automatically while executing the query.How to remove this .
    Thanks and regards
    Ravinder Elagam

    solved by myself

  • Executing SSRS using the 'label' field instead of 'value' field

    Hi,
    We have in house custom SSRS reports built for our clients and each of those reports have a 'label' field and a 'value' field. Now the 'label' field is something that the client sees on the UI as a friendly name. When a client runs the report, it gets executed
    against the 'value' field and so I was wondering if there was a way to tell SSRS to execute against 'label' field as oppose to 'value'.
    Appreciate your response!
    Thanks,
    Darshan

    I found the solution!!! By design, SSRS will not convert Label to Values. You will need to write custom code to do this. You need to do the below
    a) You need create an instance of
    ReportingService2010
    rs =
    newReportingService2010();
    b) Then you need to populate the ParameterValue[] array and populate the 'Name' and 'Value' (here the 'Value' is actually the Label that the client sees on the UI)
    c) Assign the following
    string report = "[report_path]";
    bool forRendering = true;
    string historyID = null;
    DataSourceCredentials[] credentials = null;
    ItemParameter[] parameters = null;
    and then call parameters = rs.GetItemParameters(report, historyID, forRendering, values, credentials);
    d) The above call gives you the Label-Value pair mappings within the "parameters" object and if you have cascading parameters, you will need to recursively call parameters = rs.GetItemParameters(report, historyID, forRendering, values, credentials); which
    will give you the complete set of the Label-Value pair mapping.
    e) You then iterate through the above collection and the get the Value for that Label and pass it on to SSRS
    I have tested this internally on several reports and it seems to be working. I can now pass in the displayed values to our custom web services and the above steps take care of populating the Label-Value pair mapping and then calling SSRS with the actual
    'Value'
    Darshan Patel

  • Query designer execute the query some of key figure showing as * value

    Hello All,
    I am executing the query from Query designer, executed in web in Mozilla Firefox browser some of key figures values were showing as * value.
    same query i run through RSRT its showing value for example: value is 615574389.260
    if the value is more then web cannot display the result? how to correct it, Thanks!
    Regards,
    Ranga
    Edited by: Ranga123 on Jan 30, 2012 6:09 PM

    Hi Ranga,
    Does your Key Figure also have unit? Usually we get  * when records with different units are aggregated. As you cannot add 1 EURO to 1$, * is displayed.
    Regards,
    Nikhil

  • At my bank website, when I click the link to go to pay my bills, I go to the sign on page instead but I am still signed on.

    When I go on my banks site below, I click on the payment manager, then I click on the "view and Pay Bills" Instead of taking me to that link, the sign on page appears. I am still logged on and clicking on back will take me back to the payment manager but I cannot get to the view and pay bills section. Help! Support here had no suggestions. My bank said that your latest version was giving people trouble.
    == URL of affected sites ==
    http://web.capcomfcu.org/index.php

    [http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

  • SQ01 query, one field not populating in first line, pushing data to next line

    Good day all
    I have worked with queries for some time and have never encountered this error
    I have a few table joins (FAGLFLEXA, BKPF, BSEG, EKKN, SKAT and EKPO), every thing works and displays correctly, except for the one field
    EKKN (ABLAD) - Unload Point.
    For some reason, when I test the query, it displays correctly with one entry, but as soon as you run the test for more entries, for some reason, the first Unloading point on the report is empty and the value reflects on the next line.  If you display the physical documents where the data pulls from, you can clearly see that the entire report pushes down the field to the next line.
    For example
    Physical SAP Document GL and or PO:
    Year     Per     Do     Document No     Profit     Account     Short Text     Merch     Amount in Grp     Segm     Posted on     Unload Point
    2014     001     XF     40000000000     ABCD     86100       Text              ACD       72799.60             11          20140106      24/59/68
    2014     001     XD     40000000001     ABCC     86100       Text              ACC       18755.50             11          20140108      26/00/48
    SQ01 report (with one line)
    Year     Per     Do     Document No     Profit     Account     Short Text     Merch     Amount in Grp     Segm     Posted on     Unload Point
    2014     001     XF     40000000000     ABCD     86100       Text              ACD       72799.60             11          20140106      24/59/68
    SQ01 report (with more lines)
    Year     Per     Do     Document No     Profit     Account     Short Text     Merch     Amount in Grp     Segm     Posted on     Unload Point
    2014     001     XF     40000000000     ABCD     86100       Text              ACD       72799.60             11          20140106      2014     001     XD     40000000001     ABCC     86100       Text              ACC       18755.50             11          20140108      24/59/68

    I found the error!  The query was written in a certain format.  For example it had many fields which was used to populate the data from different tables.  The error occured because of the sequence.  The query had to bring in a field but it had to derive it from a purchase order, but the purchase order check was after the said field therefor, when it looked at the Purchase Order, it found the field and populated it, but only on the second line.  In the first line it couldnt find the Purchase order yet (as EKKO was lower down), so it didnt populate it yet....
    SIGH

  • Jump through query - It uses ALEREMOTE user instead of current user

    Hi,
    When I do the query in BW using TCODE-rsbbs, select source system, i can jump using query through Bex to ECC system the issue is:
    --It logon using the ALEREMOTE user is there any way to make it to use the current logon user?
    Thanks in advance

    Suman\Madhavi
    Thanks for your suggestions.
    I am using a user with SAP_ALL but still same issue, it is taking the user specified in RFC connection instead of using the current user.
    I created a new logical system and RFC connection with option use 'current user' and tried to create a new source system so that I can use it for RRI jumps but it failed with error: name <logical systemname> of client <client#> is not same as the name <new logical system name> of the warehouse.
    Please let me know if have any suggestions.
    Thanks

  • Signing a class instead of a jar

    Would be possible to sign a .class file instead of a .jar file?
    Dani

    I am not explaining very well.
    I have a architecture who has a JSP file. This JSP loads an applet and I need the applet to be signed for a correct execution, but the applet is not a jar, it's a class. The JSP file uses a <jsp:plugin> in order to import an applet, but I wanted to avoid changing the code (it works properly) and uses an JAR as applet.
    <jsp:plugin type="applet"
              code="myApplet.class"
                   codebase="/idp"
                   name="pinApplet"
    width="300"
    height="300">
              <jsp:fallback>
                        Authentication Form is not supported by the browser
                   </jsp:fallback>
    </jsp:plugin>
    I need myApplet.class to be signed, but I am obliged to change the code to include the applet as a JAR if I want a signed applet.
    Edited by: 805978 on 12-ene-2011 8:27

  • Can I execute a query against an already populated RowSet object?

    Hi,
    Is it possible to query an already retrieved RowSet object?
    Something like "search within results" feature that many search engine posses .
    Thank you in advance, Kostas

    There is no ready-made way to execute SQL queries against a ResultSet. Anyway, you shouldn't keep ResultSets open, you should convert them to collections of objects and close them.
    When you get the ResultSet, loop over it, create an object of a suitable class from each row, and store those objects in a LinkedList.
    When you need to search within the results, loop over the LinkedList and pick the objects you need.
    Alternatively, re-execute the SQL query with the additional WHERE clauses appended to the original query.

Maybe you are looking for