In Query mode, date items does not accepts more than 10 characters..Why?

Dear All,
In my form, While querying my date items, it does not accepts more than 10 Characters. Could it be changeable.
Actually i want to search like greater than specified date( >01/01/2007 ).
But i can specify like >01/01/07. After tabbing out from that item, it displays like >01/01/200.
How to overcome this issue.
Please help.
Regards,
Balaji

You are absoletely correct Francois!
Previously i have made a mistake that both of my maximum length and query length property to 20. That time it was not worked. Now i changed my maximum length to the old one like 11 and i changed only the query length to 20.
Now it is working. I understood the concept wrongly.
Thanks Francois!

Similar Messages

  • HT203983 my apple id does not accept my payment method. why? i am using that same visa card the last 5 years!

    my apple id does not accept my payment method. why? i am using that same visa card the last 5 years!

    there may be several reasons why your credit card may be declined by the iTunes store ,
    the reason the iTunes store require c.card when you setup your apple id is for verification purposes
    if you have called the iTunes store in the past about unrecognised charges, or unauthorised activity ,
    then your bank may have blocked your card from being used on the iTunes store, i would recommend contacting your banking institute

  • Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!

    Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!

    Maybe the problem is not your MB Air......
    Try these:
    Make sure bluetooth is turned off if you're not using it.
    Set your screen brightness to 4 bars.
    See what's loading in your login items.  Delete the ones you don't need.
    Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
    Highlight the ones with the highest %CPU and hit quit process.
    Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness.

  • Iphone does not sync more than 3 mobile numbers with outlook

    as title says: iphone does not sync more than 3 mobile numbers with outlook.
    when i have a contact in iphone and i add more mobile numbers than just one, they do not pass through to outlook 2007. i realize this is because there is no room in outlook for more than 2 (if i remember correct) mobile numbers,but is there a workaround?

    I've got the same problem but with a "4 number" limit. Many of my outlook contacts have more than 4 numbers associated with them but the iPhone contacts app only shows/syncs 4 numbers. Any way to increase this limit on the iphone?

  • Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

    Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
    I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
    Please help me!

    We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

  • External table is not accepting more than 255 Characters

    Hi,
    I'm new to External table.. Somehow External table is not accepting more than 255 Characters even though I'm using VARCHAR2(4000 BYTES).. Can you please help me..
    CREATE TABLE DM_CL_ExterTbl_Project
    project_name VARCHAR2(80 BYTE),
    project_id VARCHAR2(20 BYTE),
    work_type VARCHAR2(100 BYTE),
    work_description               VARCHAR2(4000 BYTE)
    ORGANIZATION EXTERNAL
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY UTL_FILE_DIR
    ACCESS PARAMETERS
    records delimited by '#(_@p9#' SKIP 1
    logfile 'pp.log'
    badfile 'pp1.bad'
    fields terminated by ','
    OPTIONALLY ENCLOSED BY '"' and '"'LDRTRIM
    missing field values are null
    REJECT ROWS WITH ALL NULL FIELDS
    project_name,
    project_id,
    work_type,
    work_description
    LOCATION (UTL_FILE_DIR:'TOG_Data_Extract.csv')
    REJECT LIMIT UNLIMITED
    NOPARALLEL
    NOMONITORING
    Thanks in advance..
    ~~Manju

    I got the asnwer.. In the filed list I have to specify the datatype & it's Size otherwise by default it will take CHAR(255)..
    work_type CHAR(4000) solved the problem..!!

  • Ended Alveza card status I have been asked by Apple to update the card, but whenever you want to update the collateral does not accept Visa site update Why

    Visa expired my right was my claim by Apple update the credit card, but whenever you want to update the Visa my right in the site does not accept site update Why

    if i have to read any comment by matt n again i will throw up...in my mouth. i have gone all over google trying to figure out what the f ff did to me without my permission, i have updates turned off so there should be no prompting to restart, there should be a polite offer not a forced update. i am angry and so are a ton of people.
    everytime i go to a new complaint, another angry fellow ff user there is matt n with his infuriating smiling little picture...telling me about the awesome safety and security of the new ff...ignoring that a supposed safe but ugly and unusable browser is worse than a customized, beautiful, well functioning browser...with supposed safety issues. i am so angry i cannot express how this has wasted my time. i have been online for 2 hours now figuring out how to fix, apparently i cannot. my old theme is not compatible now...so i am screwed.
    good bye. if i wanted chrome i would have had chrome. but i have no choice now.

  • Query which the Reports which not run more than 15 days

    Hello,
    I need I query to show all the Concurrent Programs which are attached in Application but not run more than 15 days. Also filter will segregate concurrent Reports and concurrent processes.
    regards,

    Please clarify are you interested in conc programs/reports which has not been run in last 15 days or the ones which were run only in the first 15 days from creation date.
    I am pasting the base query which gives you the details like concurrent program name, executable name, executable type, and execuation file name ( you may add condition like fcp.enabled_flag = 'Y' for all active programs etc)
    SELECT  fe.executable_name,
            fe.execution_file_name,
            fl.meaning,
            fcp.concurrent_program_name,
            fcpt.USER_CONCURRENT_PROGRAM_NAME
    FROM    apps.fnd_executables fe,
            apps.fnd_lookups     fl,
            apps.fnd_concurrent_programs fcp,
            apps.fnd_concurrent_programs_tl fcpt
    WHERE  fcp.executable_id = fe.executable_id
    AND    fe.execution_method_code = fl.lookup_code
    AND    fl.lookup_type =  'CP_EXECUTION_METHOD_CODE'
    AND    fcp.concurrent_program_id = fcpt.concurrent_program_idEdited by: 936671 on Sep 4, 2012 5:58 AM

  • jsp:useBean, oc4j does not allow more than one???

    Hi,
    I have a jsp in which i access a bean class.In the same jsp i have another included jsp in which i use one more bean class.The error i get is: "Tag attempted to define a bean which already exists:2nd bean id". Does oc4j not support more than one bean class?Can anybody suggest where i am going wrong?

    Hi Shilpa,
    Is this a Z module pool or you are talking about the standard.
    If it is Z module pool create a new lock object of type exclusive or look out for standard lock object for purchase order in SE11.
    after generating the custome lock object SAP would generate 2 function modules 1) Enqueue_<lock object name> (Request lock) 2) Dequeue_<lock object name>(Release lock).
    call these lock FM'S in your module pool likely in the PBO call the Enqueue FM and process your transaction and finally by the end of the transaction call the Dequeue FM to release the lock locked.
    I believe you can try with the lock object 'EMEKKOE'
    Hope this helps you.
    Thanks and Regards,
    Ranjith Nambiar

  • How to write validation in java sript item should not allow more than 20 ch

    HI,
    I need to write validation in java script for a item it should not allow more than 20 characters.
    Thanks
    Nr

    If this answers your question, please mark your question as answered (so everyone knows it is answered) and assign points where you see fit..
    Thank you,
    Tony Miller
    Webster, TX

  • Following Artists Does Not Display More Than 300 Entries.

    Hello, This has been an issue for a long time now, with the web player. The Artists List, Following, etc. do not show more than 300 entries.I follow something 800+, and can't see over half of my 'music collection' on this service. Please for the love of everything; Remove the limit on the scrolling feeds with add more bands as you scroll. I am also becoming quite irate this isn't even being acknowledged. I've had no success in email exchange with support either. Once I told them I am a developer by profession, and have built similar feeds for various sites, they stopped the BS, and flat out ended the exchange. I don't understand.If you want to get my sub $, I want this to work properly. Thanks, 

    Any progress on this? Still an issue.What is the point of following artists if you cap the display number. I've built these infinite feeds myself, admittedly not in flash, rather json etc. and this should be pretty easy to fix. I'd like to be able to see all the artists I follow, not less than half. Thanks.

  • Compiling for Android does not accept filenames with characteres ã, é, ç, etc.

    I'm trying to compile an Android application, but when i try so, i receive a messagem:
    Error occurred while packaging the application:
    Asset file or directory name contains invalid characters. Error occurred for : aplicação.png
    it does not allow characters like ç ã é á, etc.
    Is that an Android limitation or some Flex configuration i must change?
    Thanks.

    Thanks a lot for the help, etresoft. I just finished this project and I am going to explain how I did it, for the others that might need this information.
    To be true, one doesn't need to escape the characters, unless it's impossible to send 8-bit-encoded text to the printer. At this day and age, this should not be a problem on any platform. Zebra printers accept CP850 and CP1250. I chose to use CP850, also known as "DOS Latin 1".
    My ZPL code is stored in a NSString. I create a temporary file from this NSString and then use PMPrinterPrintWithFile to send it to the printer as a raw print job.
    To create the file, one can simply use +NSString writeToFile:atomically:encoding:error:+ and pass CFStringConvertEncodingToNSStringEncoding(kCFStringEncodingDOSLatin1) as the encoding.
    It just works, beautifully.
    Message was edited by: fdonadio (fixed a typo)
    Message was edited by: fdonadio

  • Web Application name does not accept less than 3 characters

    Hi,
              I recently migrated from WLS6.0 to WLS6.1 in NT 4.0 and found that, if the Web Application name is less than 3 characters, server does not report any errors, but could not access the web application. This was not a problem in WLS 6.0.
              If anyone faced this problem or it is documented in WL6.1 please let me know.
              Thanks,
              Cabir
              

    It's been reported and I believe that support can provide you with a patch.
              Peace,
              Cameron Purdy
              Tangosol, Inc.
              Clustering Weblogic? You're either using Coherence, or you should be!
              Download a Tangosol Coherence eval today at http://www.tangosol.com/
              "Cabir" <[email protected]> wrote in message
              news:3c802f4f$[email protected]..
              > Hi,
              >
              > I recently migrated from WLS6.0 to WLS6.1 in NT 4.0 and found that, if the
              Web Application name is less than 3 characters, server does not report any
              errors, but could not access the web application. This was not a problem in
              WLS 6.0.
              >
              > If anyone faced this problem or it is documented in WL6.1 please let me
              know.
              >
              > Thanks,
              > Cabir
              

  • Google calendar does not sync more than 6 months o...

    I sync multiple google calendars.... this works very well.
    I recently noticed that if I enter an appointment more than 6 months in the future on my phone, it disappears after it syncs with google.  It stays on the google calendar, but disappears from the phone.  I continue to run tests to find out if these appointments will eventually show up on the phone again as we get within 6 months of an event.
    I have run many test entries and tried to reset phone/ delete and reactiveate google account..  This problem is not replicated on another lumia 521... so its not a google issue.  It seems to be Nokia's 925 issue.  I think this started to be a problem after the last OS update.
    As of October 30, 2013,  I entered weekly test appointments.  They sync perfectly until the week of April 21, 2014.  I schedule many appointments more that 6 months out so this is a problem.   
    I'm curious if other's have this issue and are just not aware of it.
    I have not seen this problem addressed.. I hope someone can help.  (Nokia 925)

    We are having similar problems with my wife's recently acquired Lumia 520. We are also experiencing the one hour shift in appointments reported by others. This does not appear to be reliably resolved by the time zone settings suggested.

  • Add_dim  does not allow more than 1 member - Important

    Hi,
    Im performing correctly some data copy to another app.
    The problem is that when I use  add_dim  it is not possible  to input more than 1 member per dim.
    How can i fix this?
    I.e. 
    Conceptos.vap (all this members) -->   account 40000 (destination member)
    Conceptos "toner"  --->  account 50010 (destination member)
    I wanted to simplfy my script  by typing this (to me this is supposed to work, is very simple, also running a script separately works for both Conceptos)
    *select(%conceptos%,"id","conceptos","vap='i'")
    *xdim_memberset conceptos=%conceptos%
    *xdim_memberset moneda=mxn,usd
    *xdim_memberset lob=servicios_out
    *xdim_memberset metrica=importe_p
    *xdim_memberset consumibles=consumibles_dummy
    *xdim_memberset tiempo=%tiempo_set%
    **WHEN conceptos
    **IS %conceptos%,toner*
    WHEN metrica
    *IS importe_p,importe_r
    *REC(FACTOR=1,metrica="dummy_metrica")
    *ENDWHEN
    *ENDWHEN
    *COMMIT
    *DESTINATION_APP= ALLDORA_FINANZAS
    *xdim_memberset moneda=mxn,usd
    *xdim_memberset lob=servicios_out
    *xdim_memberset metrica=dummy_metrica
    //*xdim_memberset oi <> oi_dummy
    *xdim_memberset tiempo=%tiempo_set%
    *skip_dim = conceptos
    *skip_dim = consumibles
    *add_dim ceco=A010ops001
    *add_dim cuenta=40000, 50010  --->  ERROR !!!!
    *add_dim empleado=empleado_dummy
    *WHEN conceptos
    *IS %conceptos%
    *REC(FACTOR=1,cuenta="40000")
    *IS toner
    *REC(FACTOR=1,cuenta="50010")
    *ENDWHEN
    *commit
    If I just type separately the logic for each one WITHIN the same script, the Account destination member taken is the one found at the bottom of the script, i mean, it is not performing the input in the final Account (40000 and 50010), just for one of them.
    However... since i have to do 14 different logics, it is very awkward to execute 14 scripts... in order for this logic to work,
    Thanx
    Velázquez

    Hi Velázquez,
    The *ADD_DIM statement only allows you to assign one new dimension and one new dimension member to your destination application.
    from the documentation:
    *ADD_DIM {dimension name}=[,{dimension name}=,u2026]
    Sorry this is a limitation.
    Instead of skipping and then adding the following:
    skip_dim = consumibles
    *add_dim ceco=A010ops001
    *add_dim cuenta=40000, 50010 ---> ERROR !!!!
    Maybe you could try renaming:
    i.e.
    *RENAME_DIM consumibles=cuenta
    And then add that dim to REC statement:
    *WHEN conceptos
    *IS %conceptos%
    *REC(FACTOR=1,consumibles="40000")
    *IS toner
    *REC(FACTOR=1,consumibles="50010")
    *ENDWHEN
    You may need to play around with your logic and see what works.
    Thanks,
    John

Maybe you are looking for