In query, turkish column name is not displayed correctly?

In my characteristic and key figure infoobjects , i used turkish characters for explanation but in Bex they are displayed as illegal characters for column names.
How can i correct this or where would i make a mistake?
Thanks.

Hi Tuncer,
I am dealing with the same problem you had.
Turkish characters in the column names, infocube names are not displayed although in BW turkish characters are displayed properly. Did you solve your problem about Turkish characters in column names.
If you could solve, I would be glad to hear your solution.
Thank you.
Mehmet Cekdemir

Similar Messages

Substitution string used in custom Report column name does not display in PDF version of report

I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
Pat

First, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Query on Multiprovider - Data is not displayed correctly

Hi,
I have two cubes in a multiprovider.
1st has following Characteristics :
1. Service Order
2. Product line code
3. Cost Center
4. Fiscal Period
5. Fiscal Year
6. Actuals - Key Figure
2nd cube has
1. Product Line code
2. Cost Center
3. Budget type
4. Fiscal Year
5. Fiscal period
6. Budget Amount - Key figure
I have a query to display: Service Order, Product line, cost center, fiscal period, actuals and budget amount.
When I execute I get 2 rows:
1 st row displaying - Actual values with all the data
2nd row displaying Product line and Budget with all other fields containing '#' sign or "not assigned" .
I will appreciate if you can tell me what mistake I am doing. I have checked the multiprovider 'Identification' - all the fields are selected.
Thanks in advance.
Regards
Jitendra

Hi Jitendra,
This is because you have got service order charcterstic in 1st cube only and does not exist in 2nd cube. when you try to display Service order, you will get two records. If you remove service order from display of query, you will be able to see one record as charcterstics are common in both cube.
If you want to display service order and wud like to resolve this issue, try the following:
Restrict Budget amount with characterstic service order and right click it and select Constant. Then execute the query.
Cheers
SB

Unknown Column Name "XYZ" not detemined untill runtime.Select query.

Hi,
I have written a query in ABAP.I am getting following error.Can some one help me resolve this.There is a column "LANDX" in standard table T005 of PI which i need to get values from. The problem is that the column is visible only at runtime and not otherwise.How can i fetch data from this coulmn writing a select query for this.
Query written is:
SELECT landx from T005 into table it_t005.
Error:
"Unknown column name "XYZ" not determined untill runtime,you cannot specify a field list."

Hi Deepika u were right. that there is a landx field but it is included in that table.
so u cant exactly get it.
now u can get ur country name and iso code just like this.
tables: t005t , t005.
data: BEGIN OF it OCCURS 100,
        landx like t005t-landx,
        intca like t005-intca,
        END OF it.
SELECT t005t~landx t005~intca   into CORRESPONDING FIELDS OF TABLE it
from T005t
INNER JOIN t005 on ( t005t~land1 = t005~land1 ).
it is fulfilling ur need.
Edited by: Matt on Feb 3, 2009 7:49 AM - Please don't use txtspk

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
   I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
      CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
    METHODS:
      display IMPORTING l_table TYPE string
                         l_fcat   TYPE string.
ENDCLASS.                    "lcl_report DEFINITION
      CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
    DATA: gr_table   TYPE REF TO cl_salv_table.
    DATA: gr_columns TYPE REF TO cl_salv_columns_table,
          gr_column TYPE REF TO cl_salv_column_table,
          ls_fcat    TYPE slis_fieldcat_alv.
    DATA: gr_display TYPE REF TO cl_salv_display_settings.
    DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
          l_field    TYPE string.
    FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                    <ft_fcat>     TYPE STANDARD TABLE.
Get the ALV object refering to the output table
    ASSIGN (l_table) TO <fs_table>.
    ASSIGN (l_fcat) TO <ft_fcat>.
    TRY.
        cl_salv_table=>factory(
          IMPORTING
            r_salv_table = gr_table
          CHANGING
            t_table      = <fs_table> ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
Add basic default functionality in the ALV report
Functions
    l_o_functions = gr_table->get_functions( ).
    l_o_functions->set_all( abap_true ).
    gr_columns = gr_table->get_columns( ).
    gr_columns->set_headers_visible( abap_true ).
Display the list
    gr_table->display( ).
ENDMETHOD.                    "extract
ENDCLASS.                    "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
    get_storecodes    USING      p_stfile
                      CHANGING   it_t001w,
fetching mard data
    read_mard_data,
preparing fieldcatalog for Final Data
    create_filedcat   USING      it_t001w
                                 it_site
                      CHANGING   it_fieldcat,
preparing structure & internal table for Final Data
    create_final_table_structure USING it_fieldcat,
prepare output data
    prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
    display_data    USING l_table
                          l_fcat.
*&      Form get_storecodes
FORM get_storecodes USING    p_p_stfile
                     CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw    TYPE truxs_t_text_data,
rs_site   LIKE LINE OF rt_site,
l_index   LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w>   LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = lt_raw
      i_filename           = p_p_stfile
    TABLES
      i_tab_converted_data = p_it_t001w[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign   = 'I'.
rs_site-option = 'EQ'.
rs_site-low    = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
    LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
      l_index   = sy-tabix.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = <fs_t001w>-werks
        IMPORTING
          output = <fs_t001w>-werks.
      MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
      IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
      append site to ranges
        CLEAR rs_site.
        rs_site-sign   = 'I'.
        rs_site-option = 'EQ'.
        rs_site-low    = <fs_t001w>-werks.
        APPEND rs_site TO rt_site.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    SORT p_it_t001w BY werks.
    SORT rt_site.
ENDIF.
ENDFORM.                    " get_storecodes
*&      Form create_final_table_structure
FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                p_it_site       LIKE it_site[]
                       CHANGING p_it_fieldcat   LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w>     LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site>      LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname    TYPE slis_fieldname,
workarea for site ranges
rs_site        LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname    = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING :   'MTART'      'CHAR'        '5' ,
                               'MTBEZ'      'CHAR'        '25' ,
                               'MATKL'      'CHAR'        '6' ,
                               'WGBEZ'      'CHAR'        '20' ,
                               'MATNR'      'CHAR'        '18' ,
                               'MAKTX'      'CHAR'        '30' ,
                                l_fieldname 'CHAR'        '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
                                       'Divsion Description',
                                       'MC Code',
                                       'MC Description',
                                       'Article',
                                       'Article Description',
                                        l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
    READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                              BINARY SEARCH.
    IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
       <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = <fs_site>-werks.
    prepare fieldcatalog
      PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
    create header for excel
      PERFORM create_excel_header USING l_fieldname .
      CONTINUE.
    ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM.                    " create_final_table_structure
*&      Form build_fieldcatalog
FORM build_fieldcatalog USING    p_fieldname      TYPE slis_fieldname
                                  p_datatype       TYPE datatype_d
                                  p_length         TYPE intlen.
DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname   = p_fieldname.
ls_fieldcat-datatype    = p_datatype.
ls_fieldcat-intlen      = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form create_final_table_structure
FORM create_final_table_structure USING    p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fieldcat
    IMPORTING
      ep_table        = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM.                    " create_final_table_structure
*&      Form create_excel_header
FORM create_excel_header USING    p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM.                    " create_excel_header
*&      Form prepare_final_data
FORM prepare_final_data .
DATA          : l_matnr       LIKE g_matnr,
                  l_werks       LIKE g_werks,
                  l_index       LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
    l_index    = sy-tabix.
    IF l_matnr IS INITIAL.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                          l_werks.
    ELSEIF l_matnr <> <fs_mard>-matnr.
      APPEND <fs_final> TO <ft_final>.
      CLEAR l_matnr.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                         l_werks.
    ELSE.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    ENDIF.
    IF l_index = g_lines.
      APPEND <fs_final> TO <ft_final>.
    ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM.                    " prepare_final_data
*&      Form get_other_data
FORM get_other_data USING    p_l_matnr
                              p_l_werks.
FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                  <fs_t023t>    LIKE LINE OF it_t023t,
                  <fs_t134t>    LIKE LINE OF it_t134t,
                  <fs_makt>     LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
    ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-mtart.
    ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-matkl.
    READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr   BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
      ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_makt>-maktx.
    ENDIF.
    READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
      ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t023t>-wgbez.
    ENDIF.
    READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
      ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t134t>-mtbez.
    ENDIF.
ENDIF.
ENDFORM.                    " get_other_data
*&      Form display_data
      text
FORM display_data USING    p_l_table
                            p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
                               l_fcat = p_l_fcat ).
ENDFORM.                    " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

The portlet name is not displayed in the portlet drop down list ?

Hi,
I use Sun Java System Portal Server 6 2005Q4 for windows 2000 server , use the following command to deployo portlet,
I am not sure if I successfully deploy the portlet?
pdeploy deploy -u amAdmin -w amadmin -p amadmin -d "cn=amldapuser,ou=DSAME Users,dc=icheng,dc=com" C:\Sun\PortalServer\tmp\portlet\portletsamples.war
The message I got after execute the pdeploy command is =>
Deploys the portlet war file and inserts the provider into display profile..
OPTIONS
--help Help message (false)
-u --runasdn UID Bind DN (none)
-w --password Password (none)
-p --wc_password Password for WebContainer's Admin (none)
-i --instance WebContainer's Instance into which the war file is to be deploye
d (*)
-d --dn LDAP DN of the target node (*)
-g --global Global display profile (false)
-r --rolesfile File containing the DSAME and portlet role mapping (*)
-f --userinfofile File containing the user info mapping (*)
-v --verbose Generate debug messages (false)
-V --version Generate version information (false)
-l --locale Locale information (en_US)
OPERAND
Specifies a path to the war location.
Deploying to IWS
Is this mean that successfully deploy the portlet ?
After I deploy the portlet, I login to Access Manager, select the "service" from view, click the portal desktop,
click "Manage Channels and Containers", click the "New Portlet Channel...", then click the portlet drop down list,
the portlet name is not displayed in the portlet list.
How can I make the portlet name displayed in the portlet drop down list ?
Can someone help me ?
Thanks!

Hi
According to your description, since this is SQL Server forum, as Olaf Helper’s post, could you get the correct result if you execute the following query in SQL Server Manager Studio (SSMS)?
select UserName from aspnet_Users where UserId in(select FreindId from myFreinds where UserId in(select UserId from aspnet_Users where UserName = '<your typed name>'))
If you cannot get the correct result in SSMS, I recommend to check the Transact-SQL statement. Apart from the error message, we also need to know the table structure, data, join relationships between tables for further analysis.
However if there is no problem in SQL Server query, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, there is detail about listbox control in asp.net. You can review the following links:
How to Bind/Load/Fill ListBox with Sql Server Database in asp.net：http://www.webcodeexpert.com/2013/07/how-to-bindloadfill-listbox-with-sql.html#.U5f75_6KCM9
How to get multiple selected value in ListBox control - ASP.NET using C#:
http://www.dotnetfox.com/articles/how-to-get-multiple-selected-value-in-listbox-control-Asp-Net-using-C-Sharp-1047.aspx
Thanks
Lydia Zhang

Problems with Turkish characters not displaying correctly

A user is having problems with certain Turkish characters in particular fonts not displaying correctly (as shown below).
The two fonts (Gill Sans and Helvetica LT CondensedLight) are used for English language marketing material. Ideally, for continuity, the same font would be preferred for our Turkish language marketing material rather than changing it to a similar font.
Helvetica LT CondensedLight
Turkish character “ İ ” does not display correctly in either Word or InDesign.
Gill Sans
Turkish characters “ ş ” and “ ğ ” display correctly in Word but not InDesign.
My questions are:
1. For Gill Sans, why are the characters not displaying in InDesign but are in Word?
2. I've noticed here: http://www.webtype.com/font/gill-sans-family/#glyphs-tab that the required characters are available within the Gill Sans font. Is this because the font is newer and includes the additional characters? Would this work in InDesign?

One of the big differences between InDesign and Word is that Word will happily substitute glyphs without telling you. So, unless your installs of Word and of InDesign are using different versions of Gill Sans (which is possible, BTW) then your s-with-cedilla and your g-with-macron are actually not in Gill Sans but in some other font. I'm guessing Arial.
It's possible that you have more than one Gill Sans installed (e.g. one in your Document Fonts folder and another in your system fonts folder) that have different glyph complements. Gill Sans has been around a long time, and the version I have from the 90s has no Turkish support whatsoever.
As far as the capital-I-with-dot, you can check your glyph coverage in a variety of ways. In both InDesign and Word, you can open up a window that shows you all of the glyphs in a font. In InDesign, find it in Type -> Glyphs. In Word, it's called "Insert Symbol" and you can find it in Word 2010 by going to Insert -> Symbol -> More Symbols. I am guessing that the answer to this question is simply that your cut of Helvetica LT has no cap-I-with-dot. You'd need to pick a font that actually has support for Turkish. On WIndows, I use a very full-featured freebie called BabelMap to check font coverage. They have a Web version here:
http://www.babelstone.co.uk/Unicode/babelmap.html
but I personally prefer the downloadable .exe file.

Query not displaying correct data

hi all
my query is not displaying correct data.
in data target secondary sales is showing 1.800 value but in query it is showing
2.00.my requirement is my query shuld show 1.800 value. i also tried to change decimal points but not changes has happend.plz let me knw what is the problem
thanks in advance
shalini gupta

With which u r reconciling the data.
With R3 or Cube.
I think check ur key figure, have u taken the key figure 'with TAX' one or with out tax one??
Regards,
Manoj.

The Japanese file name is not displayed.

I'm using Mac OS 10.5.3(intel)/Adobe Media Player 1.0
In "Personal Videos",The Japanese file name is not displayed.
Example, "日本語.flv" is added, ".flv" is displayed in "Personal Videos".

Thank you for reply.
>Try this: Go to the Apple menu > System preferences > International > Languages. Add Japanese to the list of languages, if it does not appear there already. If you drag Japanese above English in the list, the finder and many other applications will open next time with Japanese menus. Even if you do not want Japanese menus, make sure Japanese appears somewhere in your list of languages. Just having it there unlocks Japanese features in certain software, like Japanese encoding in Apple's Mail application.
When trying, the problem was not improved.
>If the Japanese menus make things hard for you in certain applications, you can set the language of specific applications individually using the following method: First, select the application's icon in the finder and choose "Get Info"from the File menu.
>
>Expand the Languages section of the Get Info window, and you'll see the languages available for the application. If you check Japanese and uncheck English, you will get Japanese menus; if you check English and uncheck Japanese, you'll get English menus. If both are checked, the language is determined by the order of languages in the International Preferences Pane.
In "Get Info" of the application based on Adobe AIR, "Languages section" is not found.

First Name is not displayed on Family Details IView in ESS

Dear All,
We are facing problem in Family Details Iview in ESS India. Here what happens is that on family Details Iview Last name and Birth Name is displayed. First Name is not displayed on the Iview.
I Checked in the Structure HCMT_BSP_PA_IN_R0021. The fields are present in the structure.
So pls can anybody help me out in this issue.
Regards,
Dhruv Shah

Firstly check no UI elements are hidden via Personalization (Ctrl and Right Mouse button) on user level or in the PCD preview at administrator level
Secondly check you are operating a recommend SP landscape
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
--->HOW TO GET RID OF SP STACK MISMATCH ISSUES
Next check that none of the fields are marked as unused in V_T588M, V_T588MFPROPS, V_T588MFPROPC
Hope this helps
Stuart

Grand Total not displaying correctly on Column level security.

Hi All,
I have implemented the Column level security for three columns. But in dashboard report. The grand total is not displaying correctly. The grand total values are still displayed for the hidden columns.
Is there any work around for this.
The sample how my report looks like after column level security is.
ColumnA Metric1 Metric2 Metrics3(to be hidden)
A 100 200
B 150 100
GrandTotal 250 300 400( this includes the value of A = 300, B = 100).
Regards,
Bhavik

Any pointers please.

Groupwise 7 Rule Name does not display Windows 2008 R2

Under tools and rules on a windows 2008 R2 server the rule name does not display. Any ideas on how to resolve this would be greatly appreciated.

kdavisb wrote:
> 2008 R2 server
I'm pretty sure that the GW7 client is not supported on Windows 2008 R2.
Danita
Novell Knowledge Partner
Upgrading to GroupWise 2012? http://www.caledonia.net/blog/?p=514
http://www.caledonia.net/gw12upg.html

Server name is not displaying in Dropdown After client installation

Server name is not displaying in Dropdown After client installation . what might be a issue

Hi
Depending upon the installation issue may be differ, so which SAP version and database version you have installed ?
you can check
1. Windows installer
2 Sql Native client
is installed or not.
Thanks
Kamlesh

Caller Name is not displayed on incoming calls on Classic

When I receive a call on my new Classic on 10.3.1.1779 the caller's name is not displayed even thought they are a saved contact. What can I do please?

Hi and Welcome to the Community!
While not perhaps the same OS as you reveal (though you revealed SR, not OS), here is a KB that discusses that error:Article ID: KB35720 After upgrading to BlackBerry 10 OS version 10.2.1.1925 Caller ID is not linking to the Address BookHopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you. Also:Article ID: KB23393 How to find the model number and OS version on a BlackBerry smartphoneYou will need to understand the difference between OS and SR if you proceed further...official methods use SR, while the unofficial methods (including discussions in this forum) rely on OS. The most common thing to do after an update that results in issues (or if the OS you have is not functioning correctly) is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you start any of this you will want a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that.
Good luck and let us know!

In query, turkish column name is not displayed correctly?

Similar Messages

Maybe you are looking for