In QuickTime Pro (v7.6.2) Error message: Failed: qtKitErrorCatchAll(-2125)

G'day everyone,
I made a video project in iMovie '09. My intention is to burn this video at the end on a DVD to watch it via a wide screen TV.
What did I do? (reference to: David Glover "Creating higher -quality HD video with iMovie '09")
1. I exported the video, using QuickTime, to the "Apple Intermediate Codec" at the full 1920x1080 size.
Therefore I chose "Export using QuickTime" in the Share menu of iMovie. etc. etc.
2. Than I had to deinterlace the video with the JES Deinterlacer.
3. The last step to perform was to compress and scale the video with QuickTime Pro.
During this last step I got (after about three hours! and having done already about 80% of the process) the message: Failed: qtKitErrorCatchAll(-2125)
Needless to write perhaps, very frustrating, because it took 2h15' for step 1, 1h10' for step 2 and step 3 about three hours and than having the message as mentioned above!
Very much appreciated if someone can help me out!
with Light
Gert de Wilde
[email protected]

Much appreciated your quick reaction QuickTimeKirk.
if there is another way to produce a fine DVD after using iMovie to create a video project please let us know!
We make a lot of video footage around Australia from now on and we are looking for a method to produce from every journey a DVD which we (and our friends and relatives) can watch via TV.
The camcorder we use is: Sony Handycam Super Steady Shot HDR-SR11 1920x1080i HD recording
Have a look at our private website: http://web.me.com/gertdewilde/ReflectionsofAustralia/Welcome.html
To answer your question:
We started with an iMovie project.
In step 1 we selected the full 1920x1080 size
Format: Integer (Little Endian)
Sample rate: 48.000 kHz (Recommended)
Sample size: 16-bit
Channels: Stereo (L R)
In step 2 we selected the Block match threshold: 300, Gamma 2.22
In step 3 we chose "Movie to MPEG-4", Video format H.264 Data Rate:16200, Image Size 1920x1080 HD,
Under H.264 Video Options we chose Restrict Profile(s) to Main en Encoding Mode to Faster encode (single-pass)
In the streaming tab we turned off "Enable streaming"
I hope this the info you want to give us a helping hand!
with Light
Gert de Wilde

Similar Messages

I downloaded quicktime pro but I get error message need application support

I downloaded quicktime pro but can't get quicktime to open. Says I need application support, but when I download that it doesn't do any good and it takes me to 1000 other sites to download 1000 other things. I am running Microsoft Windows 7. I downloaded an upgrade of itunes also. Help Please!

QuickTime Pro does not run on iPads.
Windows 7 does not run on iPads.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

When I try to save a form as "Reader Extended PDF" in Acrobat Pro, I get an error message "This document could not be reader enabled".

Hello,
When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
The steps I’m following are described below:
1. Insert electronic signatures
- In Tasks, click on “Add New Field -> Digital Signature”.
- Move the square to the place where you want to put the signature and click.
- Fill in the “field name” with the name of the person who has to sign here.
- When it is done, click anywhere on the screen.
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
2. Save the Form
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
Here's a screenshot of the problem.
Thanks a lot.
Gael

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

On My Mac Pro Getting an unknown error message when trying to update apps

On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
Settings>Store>Apple ID - tap your ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sign in again -Settings>Store>Apple ID - sign in.
If that doesn't work either, reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When trying to sync my iPhone with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges??

When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?

Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H.

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

See if this post by turingtest2 fixes it : key not valid for use in specified state

Can't run itunes is asking for quicktime but keep getting an error message .

can't run itunes is asking for quicktime but keep getting an error message the feature you are trying to use is on a networkresourse tha is unavailable c:\docume~1\test\locals~1\temp\Ixp133.

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton

HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. can anyone help. I have been able to print on this printer for

I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing

Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing functions will not be availableuntil you have selected a printerm and reopened any documants.

Your printer driver is having problems.
Resetting Photoshop's preferences sometimes clears it up (by removing previous print settings that the driver is supposed to read, but sometimes fails at).
Otherwise you'll have to work with Canon to figure out why the driver is misbehaving.

I turned my MacBook Pro and got an error message with lines and lines of code and then it turns off

I turned on my MacBook Pro and got an error message with several lines of code and then it turns off

Were you able to see any of the error codes? Have you tried resetting NVRAM (booting while hold cmd+option+p+r until the second chime)?

Mac OS X 10.6.8, receiving error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted." How to fix?

When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.

You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software.

I'm trying to load my newspaper and I keep getting the error message Failed to Load Kiosk, I've done a restore but no joy - any ideas?

I keep getting the error message Failed to load kiosk when trying to upload my copy of the Times, I have done a restore but that hasn't worked - any ideas how to get the kiosk back and functioning again? All software is up to date.
many thanks

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

In QuickTime Pro (v7.6.2) Error message: Failed: qtKitErrorCatchAll(-2125)

Similar Messages

Maybe you are looking for