IN R12, NEW WEB PAGES ARE OPENED IN THE MINIMIZED POSITION

We've upgraded to Release 12.0.5. Whenever we click on functions that open new web pages, the new web page opens in the minimized position.
This is very troublesome for our user community because they often do not notice the new page blinking and they keep clicking the link many times.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
You can also try to set the gfx.content.azure.enabled pref to false or if this didn't help disable Direct2D by setting the gfx.direct2d.disabled pref to true on the about:config page and leave hardware acceleration otherwise enabled.
*[[/questions/942265]] Font is messed up on Firefox 17.0

Similar Messages

  • When I click on a link, I would like the new web page to open in the same window. What settings do I need to do this ? Thank you.

    I tried the options / tabs and I could not find a setting for this. I am running Windows 7 with Firefox 5.0 Thank you.

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

  • I am getting pop-ups, and web pages are opening with "special offers." My yahoo mail has advertising covering the mail messages. This is new. What do I do?

    I am getting pop-ups, and web pages are opening with "special offers." My yahoo mail has advertising covering the mail messages. This is new. What do I do?

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    SCAN WITH ALL PROGRAMS.
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • I prefer NOT to use "tabs" but have all new web pages I open come up in new windows...

    I just downloaded the newest version of Firebox and I don't like the tabs feature. Every time I click on a link within a web page or do anything else that takes me to a different web page, please open a new window.

    Links that you click on a web page should open in the same tab or in a new window if you deselect:
    *Tools > Options > Tabs: [ ] "Open new windows in a new tab instead"

  • I installed Firefox on my Android 3.0 Tablet and all Pages are opened in the mobile view. How can i disable this?

    How can i disable the mobile view of Firefox?
    Thanks for your help.
    Linuxfreak

    This add-on will let mobile Firefox send the same headers as desktop Firefox, so that web sites will offer desktop versions by default:
    https://addons.mozilla.org/mobile/addon/phony/

  • How to display content in HttpSerlvetResponse in a new web page?

    I am a newbie in servlet&html and hope to get some information here for my question.
    Suppose I have a web page having a list. after the user has chosen one of them, he will click on submit to send the request to the servlet.
    In my servlet, I use the query string to get the related information and put it into a httpServletResponse. My question is, what should I do such that the content of Response will be shown in a new web page, instead of replacing the original one? Thanks!

    You can't do this from the server side. The client side should initiate the new window. There are several ways, under each:
    <a href="servlet" target="_blank">Open in new window</a>
    <form action="servlet" target="_blank">Submit to new window</form>
    <someElement onclick="window.open('servlet');">Popup a new window</someElement>

  • My web pages are dark and out of focus. I have tried all the setting on my computer. Help!

    The web pages are dark and the contrast is off. It is not the computer as when I shut down frefox it does not seem to effect the computer.

    See:
    * http://kb.mozillazine.org/Website_colors_are_wrong
    * http://kb.mozillazine.org/Websites_look_wrong

  • HT202225 I keep getting pop ups on my iMac for the first time in 6 years after one of my kids tried to watch football through crichd tv. safari now opens with smart search engine rather than google every time i try to open a new web page.

    Ever since one of my kids tried to watch football on a website called crichd tv I keep getting pop us come up like Mackeeper and every time i try to open a web page it comes up with Smartsearch rather than google which is my preferred search engine in preferences. I have blocked extensions and changed homepage to google but this Smartsearch keeps overriding. Also a thing called MacKeeper keeps popping up I have followed the instructions to uninstall but the file it says to move to trash from the Applications folder but it simply isn't there or anywhere else. The file to uninstall Smartsearch is also not where they say it is in Library>frameworks>
    Very frustrating from going from a perfectly working system to a now very frustrating and annoying pop ups coming uo after every time i open a new web page.
    Any help or assistance in this matter would be very much appreciated.
    Russ

    You (or your kids) inadvertently installed adware. You do not need to download or install anything to fix it.
    Any tips on how to stop it from happening?
    Yes. To learn how to avoid it in the future read How to install adware.
    If you require them, Apple's removal instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • How to make Safari browser always open a new web page in a new Safari browser window which was clicked from a PDF document URL

    Hi
    I have a web application which would enable users to see a list of PDF document on the web page and when the user select the PDF document, it will be open by a adobe PDF view
    Within the content of the PDF document, it will contact URL links to some other portal web pages which we would like these other web pages to be open in a new browser window, but our testing shows that the new web pages may not always open in a new browser window.
    Could you help to advise how I can enforce that new web pages that are clicked from the PDF document can always be open in a new Safari browser window ?
    Thanks in advance.
    Regards
    Sen Lee 

    Hello,
    In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
    #Go to ''Tools'' > ''Options'' (or ''Firefox'' > ''Options'').
    #In the Options window, select the ''Applications'' tab.
    #In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
    #On the right handside you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

    Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

    This could be a complicated problem to solve, as there are several possible causes for it.
    Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
    Step 1
    From the menu bar, select
               ▹ System Preferences... ▹ Date & Time
    Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
    Check the box marked 
              Set date and time automatically
    if it's not already checked, and select one of the Apple time servers from the menu next to it.
    Step 2
    Start up in safe mode and log in to the account with the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
    Step 3
    Triple-click anywhere in the line below on this page to select it:
    /System/Library/Keychains/SystemCACertificates.keychain
    Right-click or control-click the highlighted line and select
              Services ▹ Show Info
    from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
    Repeat with this line:
    /System/Library/Keychains/SystemRootCertificates.keychain
    If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
    Step 4
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
    In the Keychains list, there should be items named System and System Roots. If not, select
              File ▹ Add Keychain
    from the menu bar and add the following items:
    /Library/Keychains/System.keychain
    /System/Library/Keychains/SystemRootCertificates.keychain
    Open the View menu in the menu bar. If one of the items in the menu is
              Show Expired Certificates
    select it. Otherwise it will show
              Hide Expired Certificates
    which is what you want.
    From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
              Secure Sockets Layer (SSL)
    select
              no value specified
    Close the inspection window. You'll be prompted for your administrator password to update the settings.
    Now open the same inspection window again, and select
              When using this certificate: Use System Defaults
    Save the change in the same way as before.
    Revert all the certificates with non-default trust settings. Never again change any of those settings.
    Step 5
    Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
    Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
              Help ▹ Keychain Access Help
    from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
    Step 6
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL.
    Step 7
    Triple-click anywhere in the line of text below on this page to select it:
    /var/db/crls
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
    Restart the computer, empty the Trash, and test.
    Step 8
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in the same way you launched Keychain Access.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    fe80::1%lo0                    localhost
    If that's not what you see, post the contents of the window.

  • When I click on a hyperlink it automatically opens it up in a PDF or in Adobe Acrobat Reader. How do I change my settings back to normal so when I click on the link it opens it up in a new web page?

    When I click on a hyperlink it automatically opens it up in a PDF or Adobe Acrobat. How do I change my settings so that when I click on a link it opens it up in a new web page like it is supposed to?

    Install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/open-link-in-new-tab/

  • I'm looking for an add on that opens a new web page. In prior versions it looked similar to a "+" sign. It is not the "Open a new Window Button" Thank you.

    The add on opens a blank new web page. For example, when on a web page, you can open a new page, with all bookmarks on the sidebar.

    The add on opens a blank new web page. For example, when on a web page, you can open a new page, with all bookmarks on the sidebar.

  • Oracle Marketing online( Web pages are not opening)

    Hello all,
    I have got 11i installed on my machine. Application is running fine. I was trying my hand on Oracle marketing module and also CRM Administration modules.
    I don't know what's going wrong the web pages are not opening ( Web page not found offline) error is appearing.
    Infact all functions of Oracle Marketing Super user have they type selected as JSP.
    I am unable to resolve this problem. Can some please help me.
    Regards
    Arun ( [email protected])

    Hi Arun,
    Please let me know which OS you have installed apps.
    Just try running adconfig and then check.
    Cheers,
    Kunal

  • Web pages are not automatically published. First they are saved as drafts with a .new extension.

    Hi,
    I am curently using adobe CS3. I am facing this strange
    problem where my web pages are being saved with a .new extension
    when I am tryign to publish. Everytime I need to go and change the
    extension from .cfm.new to .cfm inorder to see the changes made to
    the web page. I have even enabled the option so that contribute
    does not send the page for reviewing before publsihing. Even after
    enabling it I am facine the same problem. And this problem is being
    faced by everyone who has publishing rights including the admin.
    Can anyone please suggest a way to get rid of the .new extension
    after publishing.
    Your help will be greatly appreciated.
    Thanks!

    We, too, are having this problem.  I see two posts in 2008-07 reporting this, but no answers and nothing via Google.
    Details:
    1. The web server is a Red Hat Linux / Apache.
    2. It seems site-wide:  several department webmasters have reported the problem.  It may be limited to webs that are using Contribute and check-in/check-out.
    3. The only thing I can think might be causing it is that our NTP daemon is broken, and the time of day drifted ~6 minutes (I have since reset the clock by hand).

  • How can I stop auto refreshing a new web page in XP immediately after its opened?

    In XP, once I access a new web page Firefox auto refreshes that page once the page is ~80-90% opened - how can i stop this refresh?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Maybe you are looking for