In real trouble, can not even do a safe start.  Help!!!

Aloha:
My desktop G4 using OS 10.3.9 has been crashing at a great rate as I attempt to do and burn an iMovie. It just now crashed again as it was burning a iMovie using iDVD.
However, this time I could not re-start it. I tried a safe start to no avail. I then tried a regular start and after a long wait I got a text screen showing a slew of "USB set up errors" then I got "Welcome to open firmware" showing time and date. Followed by the insructions, "Type mac-boot to continue or shut-down to stop". I chose to continue. I got
Default Catch
code = 300 at %SPRO: 3fc45cb0 %SPRI:00001010
At this point I am in another text program that I can not do anything with. If I type mac-boot it just shuts down again. Frustrating.
Sounds scary to me - what say you.
I am using iLife 06.
I hope there is help out there, I sure feel lost without my computer,
Thanks.
Dan Page
Maui, Hawaii

you may want to be careful running your computer with the side door down for long periods. the internal airflow of the computer can be jeopardized by doing so and although you may think the processors are getting overtly hot from processing you may create more work for the fans.
processors and HD's can run at temps of over 130 degrees without problems.
sure they feel hot as heck but they are operating in proper parameters.
My experience with DVDR bruner internal I discovered works best in the top optical bay as the Fan that blows air over the drives is positioned best for the top optical drive bay. I used a Pioneer DVDR in the lower drive bay and had countless drive issues. when moved it to the top optical bay it has been running pretty much flawlessly since.
Having a Fan blow cool air is good idea around the Mac. the MDD front under the lower handle has vents that should stay unblocked if you want proper air intake for the computer. I read of people mounting mini fans inside the front lowere HD bay to help pull in room air as the Main system fan may not be doing a proper job.
Sometimes a PCI Slot cooler can also help cool, the upper part of the computer insides.

Similar Messages

  • Firefox crashes, can not even open in safe mode

    Hi everyone, my ff started crashing lately and I cant even open it in safe mode. help me out? Thanks!
    Crash ID: bp-0f75fb36-8774-4c37-9b69-581232141021
    Crash ID: bp-90117424-e193-4772-8ace-2a08e2141021
    Crash ID: bp-8a028e85-2918-4b1e-bad2-769072141021
    Crash ID: bp-e22a70e1-fa58-49bd-aa5b-be8692141021

    As a test, start your '''Computer''' in safe mode. Then Firefox.

  • Is there any timeline soon that apple users will be able to open things that need adobe flash player?  I can not even play any games on Facebook, I can't open certain files, pictures sent to me or things like forms I news to see when I am not home

    I am so frustrated about Adobe Flash player. I can not play any Facebook games, open certain files and pictures and documents that I need to access because not only does this phone not do it but my old Palm Pre couldn't do it either. I have had so many times where I needed to access things either online or via email, or message that I can not even look at because of this. I have to wait until I for home or ask someone else to do it for me which is embarrassing. I rave about my iPhone 4S all the time because it is truly great except for this. When it use to happen with my Pal Pre I figures once I got my iPhone that it wouldn't happen anymore but I guess I was completely wrong. I have had this problem for years and always get a message saying that it's being worked on. Well a couple of years is a long time to work on it. I understand about contracts and stuff but why is it taking a company such as Apple to be able to get it for their products? I get a lot and always want to play the games on Facebook but I can't do it on most of them at least the ones I have tried. So I can not play against anyone at that time I have to wait until I get home or use someone else's computer or something. Please tell me that in the extremely near future that this will not be a problem anymore. PLEASE!!  I am sure I am not the only one out there who is having issues and if you do get it available please let there be an upload/upgrade for current phones and not just for future versions of Apple phones. That just wouldnt be very fair to all of your loyal customers and tell everyone to get your products because they are great and end up leaving this little problem out until they by your phone.  Especially if they just got the phone they have. You guys are awesome with technology I have faith that you can make this available to all Apple products old and new by uploads or upgrades. Thank you hopefully can give me some info about the status with this or if there wen is one. I would have thought that being a company such as you are that it would already be taking care of right from the beginning and not wait years to take care of somewhat that is very important ro have especially when there is so much our there using Adobe Flash now. I am not sure if this is just a blog with customers or if the company actually sees these posts but I am just hoping company or not that someone knows something about this. Thank you for your time and for reading this entire post if you have even gotten this far.

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • Wanted to put a file via a drag and drop into applications on my finder sidebar.  it missed and landed in the sidebar itself.  i can not remove it.  i can not even highlight it.  how can i remove it from the sidebar.

    I wanted to put a file via a drag and drop into applications on my finder sidebar.  it missed and landed in the sidebar itself.  i can not remove it.  i can not even highlight it.  how can i remove it from the sidebar.

    Try holding down the Command key and dragging the file well off the sidebar.
    Hope this helps.

  • HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    I have the same problem, and the solutions in   Error changing modules | Lightroom do not work.  Even uninstalling and reinstalling a new copy did not solve the problem.  As anyone got an idea what other lingering files might be causing the problem?

  • I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen fro too long, it zoomed and I can no longer see what's on it. I can not even unlock it. What shall I do?

    I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen for too long, it zoomed and I can no longer see what's on it. I can not even unlock it. I can not use my iPad anymore. What shall I do?

    Try double tapping with three fingers and see if that reduces the screen image. If it does, unlock the iPad and go to Settings>General>Accessibility>zoom>Off. If double tapping with three fingers doesn't work, try triple tapping the home button instead.

  • Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

    Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

    <u>'''Anonymous'''</u>
    Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
    <u>'''chris'''</u>
    <u>'''''Crashing'''''</u>
    See:
    http://support.mozilla.com/en-US/kb/Firefox+crashes
    http://kb.mozillazine.org/Firefox_crashes
    http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
    http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
    http://support.mozilla.com/en-US/kb/Firefox+will+not+start
    http://kb.mozillazine.org/Browser_will_not_start_up
    ''<u>'''Hanging'''</u>''
    See: http://support.mozilla.com/en-US/kb/Firefox+hangs
    <u>'''''Hanging at exit'''''</u>
    <u>'''Kill Application'''</u>
    In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
    See: [http://kb.mozillazine.org/Kill_application Kill Application]
    '''<u>Causes and solutions for Firefox hanging at exit:</u>'''
    [[Firefox hangs]]
    [http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
    [[Firefox is already running but is not responding]]
    ''<u>'''Safe Mode'''</u>''
    You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes <u>'''before'''</u> starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''
    If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling <u>'''one at a time'''</u> until the problem reappears. <u>'''You MUST close and restart Firefox after EACH change'''</u> via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
    <u>'''chris'''</u>
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.
    <u>'''NOTE:'''</u> Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. <u>'''''At this time'''''</u>, the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; <u>'''''at this time'''''</u>, it must be manually downloaded and installed. According to the Java release notes:
    ''"'''Bug Fixes'''''
    ''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
    <u>'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)'''</u>: your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    -exit Firefox (File > Exit)
    -''<u>In Windows,</u>'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -''<u>In Windows,</u>'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
    -when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
    <u>'''Update Shockwave for Director (aka Shockwave Player)'''</u>: your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (<u>important security update released 2010-05-11</u>; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
    NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
    <u>'''You '''</u>~~red:<u>'''MAY'''</u>~~<u>''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    ''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
    ''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    ~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
    -exit Firefox (File > Exit)
    -In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • I just signed up for a subscription to adobe reader paying EUR 24.40. The program does not work, and I can not even go to my personal page .... help ...?

    I just signed up for a subscription to adobe reader paying EUR 24.40.
    The program does not work, and I can not even go to my personal page .... help ...?

    Adobe Reader is free; it does not require a subscription.
    Did you subscribe to an online service like ExportPDF, PDF Pack, ...?
    What exactly does "not work" mean?

  • My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forc

    My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forcing close again? does anyone have a solution to the above problem?

    You mean the default OS X mail app? Try reinstalling OS X Yosemite if that's the case.
    If you are referring to 3rd party mail applications, that's a compatibility issue. Some apps don't work in the new operating system. You have to wait until the developer updates the app, or you have to revert back to Mavericks to continue using it.

  • Why did you changed the big screen picture it look so better that way PLSS !!! Put it back so small I can not  even see who's calling me

    Why did you changed the big screen picture it look so better that way PLSS !!! Put it back so small I can not  even see who's calling me

    Send feedback below:
    http://www.apple.com/feedback/iphone.html

  • From the day 01/04/2014, I can not even update the apps on my iPad 4 or buy via my iPad. The same happens with the iPad mini ... My internet connection being excellent. I usually can get with the devices on the Internet, the App Store, enter into any serv

    From the day 01/04/2014, I can not even update the apps on my iPad 4 or buy via my iPad. The same happens with the iPad mini ... My internet connection being excellent. I usually can get with the devices on the Internet, the App Store, enter into any service of any Cloud Apps. But I can not update or buy apps App What is happening?

    You shouls be seeing this (tap to enlarge image)

  • HT201412 iPad not responsive. Even hold both the restart and Home buttons for 20 seconds. Trying using iTune to restore it, then only the charging button is shown. iTunes can not even recognize the iPad anymore.

    iPad not responsive. Even hold both the restart and Home buttons for 20 seconds.
    Originally I can see the iPad symbol on the screen. Trying using iTune to restore it, then only the charging symbol is shown. iTunes can not even recognize the iPad anymore.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Sold a package i can not even get?

    Hey
    So this last week my infinity 2 has be horrendous. It's taken 8 days to sort out the constant disconnects and now my internet is running at what i thought was half speed for my line (30MBs up compared to the 74MBs i'm supposed to be getting).
    So i was amazed and astounded when the customer support told me the max that my line could take was 44MBs. Have i been paying for infinity 2 for the last 2 years, when, according to customer support, i could only ever get the speed of infinity 1?
    Can anyone shed some light as to what the hell is going on? Do i need to think about making a court case for being sold a package that i can not even get or do BT need to properly train their CS employee's to read the correct information from their screens?
    Doing a DSLcheck with dslchecker.bt.com results in http://prntscr.com/4fc0te so i am a bit confused on the situation
    I have an engineer coming out next wednesday to apparently try and bump my line back up to the supposed 44MBs my line can now handle, but for me this isn't good enough.

    See link
    http://bt.custhelp.com/app/answers/detail/a_id/9760/~/what-is-my-broadband-'ip-profile'-and-why-is-i...
    and this explanation from forum member sjtp
    The sync speed is the speed of the low level connection between the cabinet and the modem.  That is determined by the cab and the modem, based on the rules of Digital Line Management (DLM).
    The ip profile is a limit imposed at the exchange (or somewhere near there) on the higher level (PPPoE) connection between the exchange and the HomeHub)router.  The idea of the IP profile is to prevent your data being sent from the exchange to the cabinet faster than the cabinet can pass it on to you.  The IP profile is automatically set from the sync speed whenever a high level connection is re-established.  It is set to a value just below the sync speed (around 96.8%), to allow for certain overheads.  The actual download speed will be at best a little less still because of yet more overheads.
    The sync speed is automatically adjusted when the low level connection breaks, or when DLM decides to give you slightly more or less speed (usually in the middle of the night to limit disruption).  Often a break in the low level connection forces a break in the high level connection, and so the IP profile is automatically reset when the low level sync is re-established.  Quite often the high level connection is not broken and continues despite the new sync speed.  This results in a 'stale' IP profile.  If the new sync speed is lower, you will only get the lower speed as that is all the line can (for the time being) manage.  If the new sync speed is higher, you won't get the benefit as the IP profile will act as a throttle.  For that reason we often suggest people disconnect and reconnect the ROUTER (NOT the modem) each morning if they suspect there might be changes; to force a profile reset.  If you have an unlocked modem (as you must have) and can see the sync speed, then you can tell more exactly when a mismatch has happened and thus whether such a disconnect/reconnect is needed

  • HT1420 no credit card so can not even download free software

    if one does not have credit card then one can not even download free software

    Just like me not be able to use it then it because USELESS

  • Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Maybe you are looking for

  • Sizing Impact for Trex and user defined Message search

    Hi All,     In PI 7.1 we have content base search in nwapi and also we have trex based earch. Do any one have any idea about the sizing impact for the both...? Regards Pradeep P N

  • Aquos as display

    I plug my macbook into my 32" sharp aquos via mini displayport, the mac recognizes it as a sharp aquos yet no display on the tv, I tried mirroring, changing inputs etc.

  • FM radio app won't launch

    My FM radio app just suddenly refused to launch: with the earphones plugged in.  It just keeps "...launching; please wait" but it never launches. I haven't a clue how to correct the problem )-:

  • I'm getting someone else's personal notes on my iPhone. How do I stop this?

    I'm getting someone else's personal notes on my iPhone. How do I stop this? I don't share my account with anyone. In my iPhone settings>iCloud>Notes is turned off. I checked my computer's iCloud notes and none of the other person's notes are on there

  • Problem with Logger setLevel() method in applet

    I am executing the following line of code in an applet: Logger.getLogger("Debug.log").setLevel(Level.ALL); I receive an AccessControlException, with e.getPermission()="java.util.logging.LoggingPermission control" When I do this in the policy file (fo