In reciever jdbc adapter config sending data to multiple tables

Hi Masters,
Can u help me with examples step by step procedure of sending data to multiple tables in reciever jdbc adapter .. configuration....
thanks in advance,
jp.

Hi,
My understanding is you are trying to use one scenario for ex a file to jdbc and want to post data into multiple tables.
If you are using Message Prortocol XML SQL format then once you define the data type for one structure then juz right click on the statement name and select Duplicate. This will create another statement in the same data type change the table name and the parameters in the duplicates strucutre.
<b>Document Formats for the Receiver JDBC Adapter</b>
http://help.sap.com/saphelp_nw70/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
All the other configurations are same simple file to jdbc scenario.
Cheers,
*RAJ*

Similar Messages

How can i Configure JDBC Receiver Adapter to INSERT data in multiple tables

Hi ,
I want to INSERT data in 4 diffrent tables.
Input Data Format is:
<H1>
<d1></d1>
<d2></d2>
</H1>
I want to insert <H1> Header data in particular table & all the details data<D1> in their corresponding table.
Note that Header Can't repeat but Details records are repeating again & again.
Is it possible to write Multiple INSERT STATEMENT in single Data Type.??
I mean to say can we write STATEMENT keyword again & again. if yes HOW ?

Hi
see below links.
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Regards
Chilla..

JDBC-XI-FILE scenario. How to extract data from multiple tables

Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
Kumar

Hi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

Send data to ECC table through RFC Call function from SAP B1 via b1if

Hi,
I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
Thanks

Solved by my own.

Inserting data into multiple tables in jdbc

I am doing on file to jdbc. Now I got a requirement to insert data into multiple tables on the receiver side. How can I do this ?

Hi,
you are going to insert data into 4 tables in a sequence one after another , I see three options.
1) Stored procedure and 2) creating 4 statement data structure (one for each table)
The third option is writing a SQL with join for the 4 tables and use action command = SQL_DML. Example as follows....
Write SQL code and place it in access tag. Pass values for the columns using key tag...
<stmt>
    <Customers action="SQL_DML">
      <access> UPDATE Customers SET CompanyName=u2019$NAME$u2019, Address=u2019$ADDRESS$' WHERE CustomerID='$KEYFIELD$u2019
      </access>
      <key>
        <NAME>name</NAME>
        <ADDRESS>add </ADDRESS>
        <KEYFIELD>1</KEYFIELD>
      </key>
    </Customers>
</stmt>
Refer this http://help.sap.com/saphelp_nwpi71/helpdata/en/44/7b7855fde93673e10000000a114a6b/content.htm
Hope this helps ....

Jdbc getting data from multiple tables

hi guys
how can i get data from multiple tables in MSAccess
please help

>
here is code thata i want to do
i have 3 tables in my MSAccess databace
Stud_O which consist name,surname fields
Stud_I consist address,tel
Stud_E department,faculty fields
Based on this I would guess that you are missing a key field. There is no way to connect the tables.
I make the class to insert data to the tables. But
cant do getting datas from this tables.
can anybody help me in making query
and method that displays reultset strings to the
textBoxes
A select ...
select name,surname from Stud_O. Use the executeQuery() method.

Adding data to multiple tables using one form in Access 2010?

Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
Balaji

You really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

In ADF how can i insert data in multiple table if they have foreign key

I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.

Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please?

Move data from multiple Tables to a Single Table & Convert the list to ALV.

Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
        matnr type marc-matnr,
        maktx type makt-maktx,
        DISPO type marc-DISPO,
        MINBE type marc-MINBE,
        LABST type mard-LABST,
      end of i_final.
DATA: Begin of i_marc occurs 0,
       matnr type marc-matnr,
       DISPO type marc-DISPO,
       MINBE type marc-MINBE,
      end of i_marc.
DATA: Begin of i_makt occurs 0,
       matnr type makt-matnr,
       maktx type makt-maktx,
      end of i_makt.
DATA: Begin of i_mard occurs 0,
       matnr type mard-matnr,
       LABST type mard-LABST,
       LGORT TYPE MARD-LGORT,
      end of i_mard.
SELECT matnr
        dispo
        minbe from marc
        into corresponding fields of table i_marc
        where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
        75 'MRP',
        80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
        75 i_marc-dispo,
        80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
        MAKTX from makt
        into corresponding fields of table i_makt
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
        30 i_makt-maktx.
ENDLOOP.
SELECT matnr
        LGORT
        LABST from mard
        into corresponding fields of table i_mard
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
        30 I_MARD-LGORT,
        40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
        30 'Material Desc.',
        75 'MRP',
        80 'Reorder Qty.',
        105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
        30 i_final-maktx,
        75 i_final-dispo,
        80 i_final-minbe,
        105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
       30 i_makt-maktx,
       75 i_marc-dispo,
       80 i_marc-minbe,
       105 i_mard-labst.
*ENDLOOP.
Regards,
Vishal

Change like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
   WRITE: /10 i_mard-matnr,
   30 i_mard-lgort,
   40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
   READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
   READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
   MOVE i_mard-matnr TO i_final-matnr.
   MOVE i_marc-dispo TO i_final-dispo.
   MOVE i_marc-minbe TO i_final-minbe.
   MOVE i_makt-maktx TO i_final-maktx.
   MOVE i_mard-labst TO i_final-labst.
   APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

Best way to import data to multiple tables in oracle d.b from sql server

HI All am newbie to Oracle,
What is the Best way to import data to multiple tables in Oracle Data base from sql server?
1)linked server?
2)ssis ?
If possible share me the query to done this task using Linked server?
Regards,
KoteRavindra.

check:
http://www.mssqltips.com/sqlservertip/2011/export-sql-server-data-to-oracle-using-ssis/
      koteravindra
Handle:      koteravindra
Status Level:      Newbie
Registered:      Jan 9, 2013
Total Posts:      4
Total Questions:      3 (3 unresolved)
why so many unresolved questions? Remember to close your threads marking them as answered.

Insert data into multiple tables

Hi all,
I've a requirement where i need to insert data into multiple tables using PL/SQL procedure
Procedure should have two parameters
1. Table Name (parameter1)
2. Data (parameter2)
Based on these two parameters i need to insert data into table (parameter1) using data (parameter2)
ex:
Procedure insert_data (p_table IN VARCHAR2
,p_data IN -- what should be the datatype?
IS
l_statement VARCHAR2(2000);
BEGIN
-- insert data into tables
INSERT INTO p_table
values (....);
END insert_data;Thanks in advance!!

BEDE wrote:
Amen to that!
So, I believe a better approach would be the following...
Suppose you have N datafiles with the same structure, and you wish to insert into the database the data from all those files.
For that, you should have a single table, named, say incoming_file_data, which should be structured more or less like below:
create table incoming_file_data (
filename varchar2(250) not null -- name of the file inserted from
,file_time timestamp -- timestamp when the data was inserted
,... -- the columns of meaningful data contained in the lines of those files
);And you will insert the data from all those files in this table, having normally one transaction for each file processed, for otherwise, when shit happens, some file may only get to be partially inserted into the table...
Maybe one good approach would be to create dynamically an external table for the file to be loaded, and then execute dynamically insert select into the table I said, so that you will have only one insert select for one file instead of using utl_file... RTM on that.If the file structures are the same, and it's just the filename that's changing, I would have a single external table definition, and use the alter table ... location ... statement (through execute immediate) to change the filename(s) as appropriate before querying the data. Of course that's not scalable if there are multiple users intenting to use this, but generally when we talk about importing multiple files, it's a one-user/one-off/once-a-day type of scenario, so multi-user isn't a consideration.

Does ODI has ability to extract data from multiple tables

We have requirement using ODI to extract data from multiple tables depending on certain logic and spool 100+ files.
How efficient ODI is in data extraction from several multiple tables especially when the extraction is dependent on certain business logic conditions ? Also, if anyone used Peoplesoft Application Engine process to extract volumes of data, how efficient Peoplesoft Applicaiton Engine process is as compared to ODI ? I will really appreciate if someone throws some light on this ? Thanks in advance.
Ram

One more option
Create two Integration Interfaces and launch them sequentially:
1st Interface : select a IKM ... Append and activate the Distinct rows check box.
2nd Interface : select an IKM ... Incremental Update and set the UPDATE option to No.
Be aware that the update key in this Integration Interface should be composed of all the target columns mapped. Also activate the Distinct rows check box.
Thanks,
Sutirtha
Edited by: Sutirtha Roy on Jul 21, 2009 10:08 AM

In reciever jdbc adapter config sending data to multiple tables

Similar Messages

Maybe you are looking for