In regards to installing a hard drive with an OS...

I own a Macbook, and have got a hold of a MacBook Pro (Non-Unibody).
I would like to know if I moved the hard drive from the former to the latter, would it work?

Hi T,
There's no question the physical HD would work, but even if the OS installed on it did boot the MBP, you'd want to reinstall the OS using the proper installation disc/s because somewhere down the line, something is not going to work as it should.

Similar Messages

Portege 3490, install new hard drive with windows xp ready loaded?

My hard drive failed recently on my portege 3490. I bought a replacement seagate 20gb hard drive. I installed Windows XP pro by connecting the drive (via adaptor) to my desktop and running the setup cd.
I thought I could then just fit the drive back into the Portege and be good to go. However when I turn on the system straight away asks me to insert system disk.
I have no floppy drive and my only cd is a usb drive and I cannot use this to boot.
Has anyone got any ideas how I can get this working?
I plugged the same drive into my other notebook (non Toshiba) and it boos straight away. Thanks for your help
[Edited by: admin on 27-Jun-05 07:03]

Hi
I have no real solution for you except that I can confirm that the ay you installed Windows and then moved the HDD is generally not a good idea.
In your case I think what is the primare problem is that the BIOS'es in the 2 different PC's look at the HDD in different ways. That means that even though both systems might say that it is a 20GB HDD they read it differently and therefore the 3490 gets only 'strange' data from the disk.
Even if it had been able to read the contents still it is not a good idea to do the installation this way because if the chipsets differ too much then Windows will not be able to boot due to wrong drivers.
My suggestion is to
In the 3490 format the HDD with FAT32.
Once again attach the 20GB to the other system.
Copy the contents of the i386 folder of the Windows media to the HDD.
Put the HDD back in the 3490.
Boot up on a DOS/Win9X diskette and enter the I386 directory. Start the installation from there.
A little bit of fiddling but should give you no problem with boot up.
Good luck
Tom

Installing new hard drive with Windows XP on T40

My 40GB IDE hard drive on my T40 is dying. PC Doctor reports failures. I reformatted and reloaded from factory defaults with pre-loaded software, especially including Win XP. Even upon reformat, Windows discovered (and marked) many unrecoverable bad sectors.
So I decided to buy a 120 GB IDE drive (same mfr Hitachi with same drive telemetry i.e. cylinders, heads as my dying drive.
I also bought a USB to IDE cable - works well - have both IDE drives active.
I used a piece of software called BounceBack Ultimate by CMS which is supposed to copy the exact image, including partitions, boot sectors, system software, etc. from one drive to another.
I went to Windows Explorer, made sure I was able to view hidden and system files, and it looked like it worked - all files and folders that are on the old drive are on the new one.
I shut down the system, put the new drive in the internal bay, but I cannot get boot - just a flashing underscore of a cursor in the upper left corner of the screen after some drive activity.
So, I remember the good old DOS days when I could reformat with the /S option to make the disk I was formatting bootable with the OS version I was booted under.
There HAS to be an easy way to do this! I do not have any OEM version of Win XP since this is preloaded on the hard drive that is failing.
I know I have to be missing something easy. Seems like I should be able to format the new IDE drive via USB and transfer the OS while my old drive is still limping along.
Help. Thanks!

BounceBack Tech Support gave me a different version of their image copying software and the new drive booted.

I am purchasing a hard drive with OSX v 10.5 installed on it. can I make a usb or disk copy of 10.5 Leopard from this hard drive copy

I am purchasing a hard drive with OSX v 10.5 installed on it. can I make a usb or disk copy of 10.5 Leopard from this hard drive copy
Regards
Jay

If the Mac in your signature is what you desire to use 10.5 with, you can't do so, it is too new.
If PowerPC application compatibility is what you desire with that Mac, look at this solution:
https://discussions.apple.com/docs/DOC-2295#ROSETTALION
10.5 only was distributed by CD and updates to 10.5 from free online downloads. Why do you want 10.5, and what do you desire to put it on? Is the person sending 10.5 using 10.5 for anything? If he is, he can't sell the drive.

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Scorpio 500 GB. When i tried to install the MAC OS, it identies a hard drive with 3.6 TB and i'm not able to do the installation.

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Blue Scorpio 500 GB. When i tried to install the MAC OS, it identifies a hard drive with 3.6 TB and i'm not able to do the installation. I touhgt the new ard drive was bad but i was able to install windows XP. Any ideas what do i have to do?

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

I have a seagate external hard drive with files copied from windows pc. If I will download NTFS driver from seagate to my mac, could I install it safely without harming my files in the external hard drive? I am afraid I may erase all files in there.

I have a seagate external hard drive with files transferred from my windows pc. If I will download NTFS Driver from seagate to my mac, could I install it safely without harming my files? I am afraid.. I might erase all my important files during the installation..

Thanks a lot! I have already downloaded Paragon Driver and it works well with seagate external hard drive. I am copying as of now my important files from my mac to it. However, I have only the trial version which will expire in 10 days. I don't have credit card to buy for it.

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Install iTunes.
Once install, hold SHIFT and launch iTunes.
When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201

Installing Lion clean on hard drive with multiple partitions

I have a spring 2008 24" iMac running Snow Leopard.
I am about to put a new 2TB hard drive in it and after I do that I want to do a clean install of Lion on it.
I do not want to upgrade my Snow Leopard install to Lion. I will keep it on my back up drive as a fallback incase of serious workflow incompatiblities with the new OS.
For my workflow I create and use multiple partitions (Mac OS, Windows and multiple HFS+ for data) on my hard drive and I have seen that Lion creates it's own hidden recovery partition as well for the recovery functionality.
My questions are:
1) Will I have issues running Lion on a partition on a hard drive with multiple partitions that have different file systems?
2) If I install Lion into one of these partitions will it create it's recovery partition within the space of the partition it is being installed into?
3) I will be creating a clean install by downloading Lion using the App Store and then burning an installer DVD using instructions I found elsewhere and then using that to do the install on the new drive. Is that the best route to take?
All my current data I will have on a backup external hard drive and after I complete the Lion install on the new larger drive I will manually reinstall all my software and move my data back from my backup drive to the new drive one partition at a time except of course for OS partition. I keep all my real user data outside of that partition anyway.

I believe this article answers most of your questions.
http://support.apple.com/kb/HT4718
or possibly
http://support.apple.com/kb/HT4649
You will most likely run into the error message that "Some features of Mac OS X Lion are not supported for the disk" if you have multiple partitions set up, especially if they were not set up using Bootcamp and/or have serveral different file systems.
You can confirm that the Recovery Partition will not be installed by checking Disk Utility for your current partition map scheme.
This is most definitely not the end of the world as it is quite easy to create an external Recovery disk.
1) No, you shouldn't have issues running Lion, but Recovery HD will not be created.
2) No, and in your case it doesn't sound like it will be installed on your internal drive at all.
3) Yes. If you begin with an empty partition, then install Lion that would be considered a clean install.
Hope that helps.
Autumn

Help with installing new hard drive and transferring data?

I have a MacBook Pro 13-inch mid 2009 that is running OS X version 10.6.8. The hard drive is full and I have a new one I'd like to install, but I am awfly intimidated. I'm hoping that someone could shed some light on kindergarten-style step-by-step instructions on how to make the switch. I'm mostly concerned about the data transfer part. I've found a handy video about physically installing the drive, so I think I'll be ok there.
Here are the items I have in preperation for the switch:
• 1.0 TB Hitachi Travelstar 7200RPM Hard Drive
• Portable bus-powered USB 3.0 storage solution (to turn my old hard drive into an external hard drive)
• Tools including a small phillips screwdriver and some Torx Screwdrivers
• Time Machine Extermal Hard Drive with all of my backups
Here are some things I have read that I find to be confusing
• Some suggest I should transfer my data from the old hard drive to new new one BEFORE I install the new one. (I'm not sure how that works.)
• Some suggest upgrading to the latest OS X before transferring any data. (Would that be Mavericks? I haven't upgraded to that yet. Is that necissary?)
• Some suggest that I will need the MacBook Pro's installation disk to make the switch. (I don't know where that disk is. Do I really need it?)
If anyone can clarify any of the above issues that I've listed as confusing, that would be great. Also, if anyone can help me figure out what steps to do first, second, third, etc., that would be great.
Thanks!

Also,
Will I need the install disks for the Adobe Creative Suite and Microsoft office when I put in the new hard drive?

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

Replacing Mac Mini Hard Drive with SSD, and New ML Install

I have a mid-2011 Mac Mini, and it has been running very sluggish, even when there are multiple free GB of RAM and the processor is only at 10 to 20% of capacity. I ran TechTool Pro 6 to do a scan of the whole machine, and it didn't detect anything out of the ordinary.
At this point I am guessing that it's probably a software issue. I have tons of processes running in the background all the time, and have installed hundreds of programs over the last two years, so it could be anything number of things that are somehow messing up Mountain Lion.
So, I would like to replace the 500GB internal hard drive with a 120GB SSD Drive (Samsung 840 Series), and put a fresh install of Mountain Lion on the SSD, put the 500GB in an external enclosure, and see if that fixes the problem.
Can someone explain the best way for me to do this, in a step by step list?
I can figure out how to accomplish each step, I just need some overall guidance as to how I should approach the whole thing.
Thanks very much!
Some other notes:
I have a 3 TB hard drive that I can use to back up everything on the 500 GB hard drive, but I'm assuming that time machine isn't the best way to back everything up, since I won't be able to restore the machine on the 120GB drive that I want to boot from.
Normally, I would get the internal 500GB down to 100GB of data, and then clone it on the SSD, and make the swap, but I'm assuming that cloning the drive will potentially replicate the source of the slowness, so I'm assuming that isn't the best way to proceed.

Here is my opinion and steps I would perform.
Back up your system first.
Check the iFixit.com site for a guide of how to replace the drive. Review Steps 3 and 4 BEFORE you replace your drive.
If you have a USB thumb drive with the ML 10.8.3 installer, skip to step 6.
If you don't have a USB thumb drive with the ML 10.8.3 installer, download the OS X Recovery Disk Assistant and use a 1-4GB thumb drive to create a Recovery HD on the thumb drive you can boot from. Skip to step 6.
If you have neither of the above, after replacing the drive, restart into Internet Recovery by pressing/holding the Command+Option+R keys. Since you have a mid-2011, Internet Recovery will ONLY allow you to download and install Lion since that's what probably came preinstalled on your system.
After you replace your drive and you are booted into the OS X Utilities Menu from one of Steps 3-5, select Disk Utility and format your new drive as Mac OS Extended-Journaled with the GUID partition table.
Go back to the OS X Utilities Menu and select Reinstall Mac OS X.
After the download and install of OS X you can run through the setup creating your user account (same as you had on you old drive).
If you were able to install OS X ML, skip to step 11.
If you installed Lion, you will have to login to the App Store and download/install your purchase of ML.
Run Software Updates to bring your OS X up to date.
Now you can restore any data files and apps that will fit onto the new drive from Time Machine. Enter Time Machine and navigate to your last backup to view the /Applications folders and your user folders (e.g Documents, Downloads, Music, etc.).
For your email, you can open Finder then press the Option key to see your user Library folder in the list. Select it to open it then enter Time Machine again and navigate to your last backup so that your user Library folder is opened in Time Machine. Copy your Mail folder to your Desktop so you can copy it back to your current user Library.
I think that's it.

G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

G62-234DX Hard drive dead. I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD. Error message appeared after windows loads files and starts windows from the recovery DVD. An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs. You will not be able to continue to recover this system with these discs. error: 0100-1425 -3627-3628-3623-3624. Hit OK and system powers down.

Hi:
If you purchased the recovery disks from HP, please see if making and running this first helps.
"CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

In regards to installing a hard drive with an OS...

Similar Messages

Maybe you are looking for