In repeat run, can i calculate Depreciation for perticular period.

Hi
when I calculate the depreciation in Repeat Run, It shows the message that for 12 periods only the Dep is calculated.
But I want to calculate the Dep for Particular period. Is it possible?????
If possible pl give me the suggession
Venkata Raju

Hi,
You can't do.
See below note:
It is possible to repeat the posting run within the period last posted. However, in contrast to the first run for a period, the repeat run can be restricted to specific assets. In the repeat run, the system posts changes to depreciation, as compared to the depreciation amounts from the previous run.
Normally the repeat run is carried out at the end of the fiscal year, if completing postings are necessary because of corrections to manual depreciation or depreciation terms.
Regards,
Murali

Similar Messages

Unable to calculate depreciation for 2008

Hi friends,
I would like to calculate depreciation for the fiscal year 2008.This is client requirement.He calculated depreciation 2008 and period-1.When he tried to execute depreciation for 2nd period he is getting problem
"Not all the documents in the last posting run were posted"
     Message no. AA 729
Diagnosis
     The posting session created in the last posting run was not completely
     processed. The last posting run was in fiscal year 2008, period 001,
     current number 01. A new posting run is only possible once the posting
     session has been processed completely.
Procedure
     Process the session created by the last posting run again. If this
     session no longer exists, you can create a new posting session that
     contains the missing posting documents. This function is found in the
     menu under "Recreate session." However, it is essential that no changes
     have been made in the meantime to the Customizing definition of the
     document number range.
After that i have analysed this situation. When i check TABA Table system showing document numbers are updated but document posted indicator X is not showing.
I have also checked FI documents it is not showing.
I have tried to recreate session but my problem has not been solved.
I found one SAP Note : 926062 - Errors AU265 or AA729 during RAJABS00 OR RABUCH00.It is the consulting issue.
Can anybody help me out resolve this situation and how can calculate depreciation ?
Thanks in Advance .

Dear Anji,
We had a similar situation. It was resolved for the period 1 and the once again system showed the same error while processing for period 3, same error 'Not all the documents.....
Procedure followed is this.
T.Code : AFBD for recreation of the session.
T.Code : SM37 the job wil show as finished and display will show as waiting.
but in spool display the log's last line will inform us to proces the session wainting in SM35
T.Code : SM35 process it by checking on Display Errors Only, and enter the appropriate transaction type (220)
After the above, we found the TABA table document number ranges are matching with FB03.
and the posting indicator is also updated.
Warm Regards
KV

In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

Hi
Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
REgards
Malathi

Can we calculate ATP for ATO model in OM without ASCP installed?

Hi,
Can we calculate ATP for ATO model in Order Management without ASCP installed?
We are using MRP/supply chain planning module only.
thank you,
Robert

Thanks for the reply, but this note was not addressing the above stated issue. In this note for matched configuration, they are not able to view pegging else they are able to perform multilevel atp check.
Can anyone help me to reslove this issue.
Thanks
Edited by: user604737 on Jun 18, 2011 4:48 AM
Edited by: user604737 on Jun 19, 2011 11:50 PM

Depreciation for future period

Hi Guru's,
Could anyone tell me how we can get dep report for future period is there any standard report in sap or what is the option.
Thanks
Ravi

Hi Ravi,
You can use the below Standard Report Provided by SAP for Depreciation Simulation for future period.
S_ALR_87012936 - Depreciation on Capitalized Assets (Depreciation Simulation)
While executing the report specify the future report date to view the deprecaition amount of future periods.
Hope the above helps.
Regards
Nitin

"lock" values of tax depreciation for previous periods

Hi all,
is it possible to lock calculated values of depreciation for previous periods? We need it for the case when e.g. depreciation key is changed. Then we want preserve the values for previous periods and change only the future values. But please note that we want this for depreciation area, which does not post values to GL.
thanks
Zbynek

Hi,
It did not work for me. I changed the useful life from 30 to 20 yrs and then used menu path Edit/Recalculate values. Then I used the Tx S_ALR_87012936 to display the depreciation values for individual months. But all the values were the same, i.e. the values for previous periods were not kept.
So is there a way to keep these values?
thanks,
Zbynek

Can SAP run the depreciation for closed Period and posting to diff month?

My client forgot to run the depreciation for Jan 2011, and now the Jan period has been closed and report also done.
My solution was to re-open the Jan and does the depreciation, once completed reclassify Jan depreciation posting to Feb 2011 manually.
I am just wandering whether SAP can handle this different way.
Can SAP performs Jan (Closed Period) depreciation and post to Feb period automatically or any other suggestions?
Cheers

Hi
Yes, you can do that
Follow this thread... Unable to post depreciation- Error AA730
Using ABF1, you can do it
Br, Ajay M

Can we run KSU5 - Assessment Cycle execute for previous periods

Dear Gurus,
Can we run KSU5 for previous periods. Means I have not ran from April 2008 onwards. Can I run right for all periods. Any inconsistencies arises for running the KSU5.
Please guide us.
Regards
Srinivas

Hi Srinivas,
You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
Pls revert back for further assistance...
Srikanth Munnaluri

Depreciation for past periods

Hi Friends,
Please help me on below motioned problem.
Depreciation has be run till jun 2006. Now we have some new assets which was created with past dates. I need to run depreciation for these assets from jan 2005-jun2006.
One possible solution is repeat asset run for selected assets. but this is a consolidated amount and will not show monthly break up.
Is there any process to do this.
Thanks and Regards
Udupa

Hi,
As you said, the normal way to do it is to post a repeat run as cummulated value in June 2006.
But if in case you still need to allocate on monthly basis, you can use t-code ABF1 to manually adjust the 6 months difference.
First, run the repeat run as of June, display the document as reference, manually reverse the journal via ABF1 (pk 40 reverse to 50,Pk 75 to 70, transaction type 501 to 101 or 105). Second, post 6 journal to allocate the expense from january to june.
Hope it helps.
regards,

Asset Depreciation for a period

I was looking for a standard report for depreciation which would allow me to input the posting periods "From" to "To". Basically I would want to check depreciation posted for a period of time, beginning depreciation and end depreciation.
My key requirement is the ability to input posting periods or date. For example from period 1 to period 3 or period 4 to period 6 where I can get the values fo beginning depreciation, depreciation posted for the period/s, Accumulated depreciation.
I need this report by Asset Class
Thanks.

In SAP there is no std report which can give you "from" and "to" period with starting deprec, posted deprec, and accum deprec. You will have to develop that custom report.
Std SAP report S_P99_41000192 will give you deprec posted "from" and "to" period.

How can I derive Measures for coming periods like (Next Qtr – Measure)

Hi All,
How can I derive time series measures for coming periods just like Qtr Ago and Year Ago I want Next Qtr and Next Year columns in my fact, how can I achieve this?
I have a report which talks about Actual recorded values to the projected values of current quarter , Ago Quarter , Next Quarter
Ago Qtr | Current Qtr | Next Qtr
xxx | xxxx |xxxxx
yyy | yyy |yyyy
Ago(measure, level, no of periods)
Thanks,
SMA
Edited by: SMA on Sep 21, 2010 4:23 PM

Hi All
I have derived Next to Next Qtr starting date using the following formula
TIMESTAMPADD( SQL_TSI_QUARTER , 3, TIMESTAMPADD( SQL_TSI_QUARTER , -(1), TIMESTAMPADD( SQL_TSI_DAY , -( EXTRACT( DAY_OF_QUARTER FROM "Business Intelligence"."Dso Date Dim"."Date")) + 1, "Business Intelligence"."Dso Date Dim"."Date")))
Extracted quarter from the derived date as well
EXTRACT( QUARTER_OF_YEAR FROM "Business Intelligence"."Dso Date Dim"."Next Qtr Start Date")
However I could not create a measure for next quarter using Ago or ToDate functions in BMM of OBIEE
Please let me know if any one worked on this before
Thanks,
SMA

Double record make it to single record in Query for perticular period in BW

Hi
In my ODS some of the records got doubled from Mar 17th to May 31st but from 1st of june its correct , its Open orders, i dont want to reload data again to that ODS , because its Open orders anyways its going to be close after some time , automatically it will become "0".
So i want tocalculate in query itself to make it single
please some one suggest me how can i do for that perticular period divided by 2
for example :
Open Orders (its In ODS)
120
140
20
10
50
I need output should be
60
120
10
5
25
Note : BW 3.1 Version
Thanks,
GAl
12

hi,
You can create a a formula variable with replacement path on the Period(replace with key of Posting Date/Calday) and use it for comprision in the fomula like below
if posting date is in between date1 and date2
order value = order value/2.
else
ordervalue = ordervale.
In Bex Query designer you will have the below formula
(posting date formula variable >date1 and posting date formula variable <date2) * (Ordervalue/2) + ordervalue
But also note that when the order is closed the value of order value will net become zero since the value is doubled up in the DSO , when the delta records come into DSO the order will be closed but the value will still not become zero since the reverse image will give negative value of the actual order value.
For example if your order value is 100, in your DSO it will currently show the value is 200(doubled up). In the Delta the reverse value come as -100. So the final value will still be 100(200-100).
So the best solution will be to do selective deletion
Thanks,
Praveen
Edited by: Praveen kumar kamineni on Jun 11, 2010 11:06 AM

Urgent: How to Populate SETUP table in LO for perticular period

Hi Expert,
I want to populate SETUP tables for perticuler period. Which one is the selection field.

Hi,
You can not add new selection fields to the selection screen for filling up the set up tables. The fields available for selection actually depends on the application you are referring to.
If you see in the below transactions for filling up of set up tables for different applications, you will see that a certain date field is available for selection for some of them. Please refer below. You can also check it directly in the system using the transaction.
Tcode: Application number: Date filed available
OLI1BW: Application 03(material movements): Posting Date
OLI3BW: Application 02: Document date
OLI4BW: Application 04: Created on date
OLI7BW: Application 11: No date selection possible
OLI8BW: Application 12: No date selection possible
OLI9BW: Application 13: No date selection possible
Hope this helps,
Regards,
Shilpa

Can Illustrator calculate percentages for a pie chart?

Or do I have to go to Excel (which I can barely use) and enter the numbers there to get my percentages? Thanks.

? What gives you the impression that we're wasting time?
LauraHaywood wrote:
I do know how to Google for such answers.
Please excuse the assumption that you do not know your way around the web... but you did miss the Illustrator forum down the hall and to the right.
Perhaps if you described the origin of your pie chart and how you are intending to enter numbers in Excel, we might have a better clue as to what you expect. This discussion could be continued in the Illustrator forum.

Run CKMLCP (material ledger cockpit) for closed period in MMPV

Hi,
I would like to run CKMLCP for period 12.2008, however MMPV was run in 02.2009, and only january and fabruary 2009 are allowed for material postings.
How can I settle material ledger in 12.2008? I know about note 361236 (CKMLCP: No period-end closing operations after period shift), but don't know if this will do all the proper postings or only close 12.2008 technically.
Regards,
Karol

Hi Carol ,
Please remeber costing Run i.e CKLMCP is a closing activity so it should be done only at the time of closing a particular period .A syou said two periods are open for MM but costing also post some Accounting enteries if FI period is closed the its not possible.
And its not recommended to run costing any time in middle of the period.
Thanks
Deepa

In repeat run, can i calculate Depreciation for perticular period.

Similar Messages

Maybe you are looking for