In Report Painter, my report starts on the second page

How do I prevent this from happening?
I went into section overview and joined my 3 sections into 1 table. When I go to view it in gr55 > z9ab I have to scroll all the way down and my report starts on page 2.

Hi Daniel,
Please check the following document for creating a discussion in the appropriate space within SCN: http://scn.sap.com/docs/DOC-18467
You may have the ability to move this discussion to the right area. If not, please close this discussion, and open a new one.
Many thanks,
Kristen

Similar Messages

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1"

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?

Hi H4S,
Click at the end of the Tile page.
Menu > Insert > Section Break.
Click in the second Section. Insert a page number in the Header or Footer.
Inspector > Layout > Section:
Regards,
Ian.

First group of the first sub report begins to be printed on the second page.

Post Author: gdumencu
CA Forum: General
All of the following check boxes are unchecked:
ReportProperties -> Respect Keep Group Together On First Page
Group Options -> Keep Group Together
Section expert - all sections of the report and sub reports -> Keep Group Together
Is there any other thing I missed that will determine Crystal Reports to begin printing the first group on the second page?
Thanks, G

Post Author: zxcvb
CA Forum: General
I did following and it worked for me-
Right click sub report in the main report. In format subreport uncheck Keep Together.

My firefox will allow me to open a page then it gets stuck on the second page and times out--how do I fix this. I have checked the sites on Explorer -it works

It started with the second page not being able to be displayed
example it would go to yahoo and I would sign in but the next page would just spin and time out
Now it won't even go to the first page.
Firefox will not let me go into the options to change cache.
I am trying explorer and it works.
Help

This is a page within the Yahoo site? When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In that dialog, you can individually remove your yahoo.com cookies.
Then try reloading the page. Does that help?

Error in the Report Painter standard reports delivered by SAP library 1VK

Hi,
The Report Painter standard reports delivered by SAP contain the following errors, after the upgrade from 4.6C to ECC 6.0,in the report 1LMA-001 (library 1VK, report group 1LMA), actual for activity types
are missing.
I already copy from client 000 and generated, but still missing the actual for the activity types.
Thanks in advanced for you support,
Susana

Hi,
Firts of all thanks for you answer.
Process flow:
1. production order confirmation CO11N
2. after production confirmation if we check the in order CO03 cost/analysis, the actual for the activity is there.
3. afterwards with we execute report S_ALR_87013646, the actual for the activity type is missing.
Report group 1LMA-001 library 1VK.
I already did:
1. GR59
2. Report RGRJBG00
3. OKB6
Regards,
Susana

Report Painter Vs Report writer

hi
I want to know the difference between Report painter and Report writer and also the configuration process of Report painter for the purpose of CO-PA.
plz forward the config manual to [email protected]
thanq urgent

Report writer or report painters are used for the balance sheet related reports mapping from FSV and profit center/cost center related reports, it is nothing but excel work, it is very simple.
u can develop the report by mapping of GL accounts/profit center/cost center.
if you want more details, please log on the following link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm

Report Painter and Report Writer (URGENT)

Hi All,
Please can you send me Step by Step screen shots Configuration document for Report Painter and Report Writer,
If any body send relavent data i will give reword points,
Regards,
TML

Hi,
see the below link cfor complete documentaion of report painter.
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Thanks.

Report Painter and Report Query

Hi,
Can some body explain me the difference between Report painter and report queries. How these are diffrent from ABAP prgram and ABAP queries. Who are the persons who are using all these like functional consultant or ABAPer or End users.
Regards
RKG.

Hi
Report Painter is mainly used by CO functional consultants for generating reports using variables, Key fugures and sets. This is a SAP standard functionality.
ABAB Queries / Report queries are created by Abapers and Functional consultants , this is mainly to join two or more tables run a query on the available data in the table and get the reports
ABAP program are complete program which are the coding language of SAP, where a program can be created for a new functionality which is not available in SAP . However the data required for this program has to available in SAP.
Anand

Report Painter. Form edited only display first page.

Hi All,
I have add on new column on my report painter and now the display is more than one page.
There is warning "Only the first page is displayed in the report" whenever i execute to make modification using T-code : FMEO.
There is ">" ">|" button appear on top when i run using FMEO.
But , when i try to run the form from its T-code. The report only shows the first page column.
The second page is not showing, and there is no button ">" to browse to next page as well.
Just wanna know, is there anyway i could fit 2 pages into 1 page or is there any setting that i could enable so the user could browse to second page on the form?
Thanks.

Hi..,
Onli on First page means ... this node will get executed on the first page irrespective of the page name i.e it considers onli &page& eq 1...
Suppose u have ur fist page i.e MY_FIRST_PAGE.. and in this page the data in the main window may trigger the same page as second page .. i.e if the data in the main window is not sufficient to fit in the first page it triggers the next page i.e MY_FIRST_PAGE as second page ...
so this MY_FIRST_PAGE may extend to the second page also right !! so when u use on page MY_FIRST_PAGE.. this node will get triggered if this page extends to more than one page also..
Hope u understood....
regards,
sai ramesh

Mass Change of Sets for Report Painter/Writer Reports

Hi,
We have upgraded our system from 4.6c to ECC 6.0. We are using more
than 40 Report Painter/Writer reports which in turn are using Sets.
However, these sets are containing reference to a Table which we want
to change for all the set enmasse. e.g. If currently the sets are using
Table Reference "ABC", we want to change it to "XYZ" because the
table "ABC" is not at all existing in our new system ECC 6.0.
Even we are unable to change the sets through T.Code GS02 as the table
itself is not existing. And as the table is not existing, the Reports
are giving hard errors saying that the sets do not exist.
Kindly request you to guide us in this regard.
Thanks in advance,
Shalin Shah

Looks like you have to create new sets and assign them in the report replacing the old ones.

Adding own Company Logo to Report Painter/Writer reports

Hi,
Trying to add my company logo to the report painter/Writer reports that i am producing but cant do it, i know its possible as i covered it on the SAP course on this but cant find the way, any help appreciated?

Hi all,
Unfortunately there is no function to insert company logo in the report painter report up to 4.6C version.
I'm sorry about I could not give you better solution.
Thanks and best regards,
If you have further queries, you may reach me over
Dr. Ravi Surya Subrahmanyam, PhD Finance,
SAP FICO Consultant,
Answerthink (India) Limited
Global Delivery Center
Hyderabad, India
Phone :91 9848550024
Email : [email protected]

Differences Between Report Painter and Report Writer

Hi,
Anyone knows the differences between report painter and report writer?
Thanks,
CW

Hello CW Teo,
Yes report writer can be used in logistics also. One of the way which I am aware of is described below.
Flexible analyses allow you to can tailor the way in which key figures are combined and aggregated. This means that it is possible to both provide administrators with detailed information and management with aggregated information.
Flexible analyses enable easy access to the Report Writer, a user-friendly tool with which you can create reports for various analyses. The Report Writer is integrated in other SAP applications, such as Extended General Ledger and Cost Center Accounting.
Evaluation structures form the interface to the Report Writer. Evaluation structures consist of characteristics and key figures and are easy to construct.An evaluation structure with the same name exists for each information structure in the standard system.Even the self-defined information structures created in Customizing can be evaluated via the flexible analyses.
Evaluations:You can create an evaluation on the basis of the evaluation structure.
To define an evaluation, all you need to do is select the characteristics and key figures you require (pick-up technique).One of the especially useful features here is that you have the option of tailoring the layout of your report to suit your particular requirements. You can also define extra key figures for the reports, which are derived from existing key figures by means of calculation formulas. You can thereby multiply the key figures or divide one key figure by another.
============================================================
In addition to the above you can also edit a report in logistics module with the help of a report writer. below mentioned is the process for it.
It is now possible to edit your report data using the Report Writer. You can also change the layout of the report. The most important functions of the layout design are summarized below.
Summation levels:In the report screen, you can use the menu sequence View ->Summation level to specify the number of summation used to calculate total values. All totals that do not lie within the specified interval will be hidden. A summation level corresponds to a hierarchical level (for example, material level). Summation level 1 is the lowest hierarchical level. Summation level 2 is the next level up, and so on. The individual values are on the summation level 0.
The summation levels can be specified both universally (for the entire report) or locally (for specific blocks of rows). In this case, the local settings overwrite global values.
Report views:If a report is displayed on the screen, the Report Writer will then set page breaks so that exactly one page fits into the current window. This view will be defined as the standard view. As the Report Writer always processes exactly one page, you can only use the page keys and page icons to page up and down; the scroll bars cannot be used.
The page view can be determined via Settings-> Page view. The page breaks in the page view correspond to those defined in the report layout.
Hide and show rows:The function Edit->Hide rows exclude certain preselected areas of your report from the display. You can undo this command with Edit ® Show rows.
Expanding and collapsing report rows:View-> Hierarchy->Collapse allows you to hide the report rows of the sub-trees that are located underneath. View->Hierarchy ->Expand allows you to undo this command level by level.
If you want to display all the report rows that were hidden by collapsing the hierarchy or restricting the summation levels, select, View->Hierarchy-> Expand all.
View->Collapse all allows you to reduced every row block to the highest summation level.
Texts and Annotations:You can create an annotation for your report.
Select: Extras->Annotation.
You branch into the text editor of the Report Writer.
Via the menu sequence Settings->Texts, you can create and format a title page, the last page, as well as headers and footers using word processing functions.
For example, you can store variables in the header for the author of the report, the date of the selection or the name of the person who last changed the report.
Layout parameters:Using the menu sequence Settings->Layout you can specify the page format, display form, rows and columns of the report according to your needs and you can determine the settings for the graphics function. You can make these layout settings with Report->Save settings.
Hope I had been able to help you to some extent. please assign points as reward.
Rgds
Manish

Report Server 10g - unexpected font change on second page of the report

Hi all,
I'm having a problem with Oracle Report server 10.1.2.3.0.
It's sometimes using an unusual font (It think it looks like a Greek one).
One example would be when a text overflow from page one to the second page it will change from Times New Roman to a "Greek" font and switches from bold to normal font it still happens in the same "Text" type item just on a new page. However when I update the text in the DB to a longer one so it flows through the whole second page to the 3rd page then it's using the correct font again.
When I open the generated PDF file in a text editor I see an unusual value in one of the font settings "/BaseFont /#53#79#6D#62#6F#6C" when I edit it manually to the value taken from another occurrence of the "BaseFont" in the same file it helps and changes the font to the correct one.
When I export the report to the PDF from report builder it's always using the correct font.
The encoded font "/#53#79#6D#62#6F#6C" translates to: "Symbol"
select CHR(TO_NUMBER('53','xx'))||CHR(TO_NUMBER('79','xx'))||CHR(TO_NUMBER('6D','xx'))||CHR(TO_NUMBER('62','xx'))||CHR(TO_NUMBER('6F','xx'))||CHR(TO_NUMBER('6C','xx')) from dual;
The correct font is as expected "Times-Roman"
I noticed that this happens only when HTML code is allowed in the Text/field. When I generate HTML version of the report I see after the page break and new table on the new page the following tag . When I set Web Setting->"Contains HTML Tags" set to NO then font stays the same even after the page break.
Did anyone experienced something similar?
Thank you,
Palo

We have had this a few times before and there are 2 ways that most likley will fix this.
If on mac close all adobe apps, do a find for all files with the .lst in their file name. Delete all you .lst files, they are font database files that go corrupt and will regenerate themselves when needed and usually a working copy.
Close any multiple master fonts you have open in fontbook, and other utility such as Suitcase. Multiple master fonts will have a filename like "Kronos mm", and in the adobe illustrator type >> font menu i believe they have a different icon (possibly a mm) than the others {a(type 1), tt(true type), O (opentype)}
Your problem is likely the 1st option, as the mm problem usually happens while editing the file, while the other is after you open the file. If you still have the problem, you then may have 2 different fonts sharing the same FOND ID number. Close as many fonts as you can, especially the one that looks like your wrong font.

Display Text in the Second page of the Report.

Dear,
I have a Report With Group G_Emp, having Columns Eno, Ename etc. in a Repeating frame R_1 and
I have put A frame below this repeating frame R_1 with a Text Item Just for Displaying Comments, so just i want to display this Text Item in the second page and the Employee details in the first page, the restriction is that the Text item should not print in the first page.
I hope you understand,
pls help.
Stalin Ephraim...

Hi,
if i understand well you could maybe try this :
or ) for your A frame below the repeating frame specify break page before = YES
or ) and if i understand your meaning correctly you want your comment to show once, on a seperate last page -->
in your layout section move the sdesign for your A frame from the main section into the traileer section.
regards, E.

Oracle Reports -- printing 1/3 the way down the second page.

I modifying an Oracle Report that outputs a rtf-formmated word doc. When things go to the second page (because things on the first page have fully occupied the first page), they always appear 1/3 down the page. I would like them to be close to the top of the page as possible. Does anybody have any suggestions or ideas on how this should work?
thanks
Dan

Hi Dan,
I modifying an Oracle Report that outputs a rtf-formmated word doc. I did not get your above point
When things go to the second page (because things on the first page have fully occupied the first page), they always appear 1/3 down the page. I would like them to be close to the top of the page as possible. Does anybody have any suggestions or ideas on how this should work?As for this case there might be frames or Items displayed (Print Object On - First Page) at the top of the page which are not being displayed on the second page for all such frames and Items set the Vertical Elasticity to Variable.
Hope this helps.
Best Regards
Arif Khadas

In Report Painter, my report starts on the second page

Similar Messages

Maybe you are looking for