In Reports Selection Screen Same Data is showing twice

Hi,
I have Char Info-object. In maintain master data for this object is showing 3 records like DATA, AMATX, Amatx. Now my question is "AMATX", "Amatx" these both are same or not. In reports Variable selectins it showing both values. Now these are 2 seperate records?? Now they want to show only one record.
Regards,
Satish

Hi,
I think this is because of the check box "Lower Case" for the characteristic, if this check box is enabled it will treat the ABC, AbC and aBC etc as different values.. if you dont want to have them as different master data you can remove the checkbox.
let me know if this solves your problem.
Regards,
Rk.

Similar Messages

Problen in report selection screen

Hi ,
I had a problem in the report.In the report selection screen user asking to keep page no option.So when they select the page no in the selection screen,so from that page number report out put should display.
how to do this.
Thanks,

If you generating the LIST using the classical approch you cah use the SCROLL LIST keyword for this purpose.
Like:
DATA: L_PAGENO TYPE I.
L_PAGENO = 3.
START-OF-SELECTION.
DO 100 TIMES.
WRITE: / SY-ABCDE.
ENDDO.
SCROLL LIST INDEX 0 TO: PAGE L_PAGENO.
TOP-OF-PAGE.
WRITE: 'Top-of-page'.
Regards,
Naimesh Patel

Report - Selection Screen

Hi Experts,
I have a report whose selection has pernr, which has got F4 value search help.
There are other two selection - parameters Employee Name & Designation,
User requirement is that he wants to fill up these to selection parameters once the personnel number is selected from the F4 help.
Could you please advice.
Thanks In Advance,
Regards,
Iff

Hi
This is a sample program.
TABLES: trdir.
PARAMETERS: name TYPE trdir-name.
SELECT-OPTIONS: subc FOR trdir-subc NO INTERVALS.
AT SELECTION-SCREEN.
DATA: subc1 TYPE trdir-subc.
SELECT SINGLE subc FROM trdir INTO subc1 WHERE name = name.
subc-sign = 'I'.
subc-option = 'EQ'.
subc-low = subc1.
APPEND subc.
After entering a program name in parameter and press enter the value will be updated in the select-option.
and
REPORT ztest.
DATA:
t_ret_table LIKE STANDARD TABLE OF ddshretval,
fs_ret_table TYPE ddshretval,
t_dynp_fields LIKE STANDARD TABLE OF dynpread,
fs_dynp_fields TYPE dynpread.
PARAMETER : p_matnr LIKE mara-matnr.
PARAMETER : p_mtart LIKE mara-mtart MEMORY ID mta.
AT SELECTION-SCREEN OUTPUT.
*select single mtart from mara into p_mtart where matnr eq p_matnr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'MARA'
fieldname = 'MATNR'
searchhelp = 'MAT1'
SHLPPARAM = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_MATNR'
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
return_tab = t_ret_table
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE t_ret_table INTO fs_ret_table INDEX 1.
CLEAR t_dynp_fields.
fs_dynp_fields-fieldname = 'P_MATNR'.
fs_dynp_fields-fieldvalue = fs_ret_table-fieldval.
APPEND fs_dynp_fields TO t_dynp_fields.
clear fs_dynp_fields.
fs_dynp_fields-fieldname = 'P_MTART'.
SELECT SINGLE mtart FROM mara INTO fs_dynp_fields-fieldvalue WHERE matnr EQ fs_ret_table-fieldval.
fs_dynp_fields-fieldvalue =
APPEND fs_dynp_fields TO t_dynp_fields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = t_dynp_fields
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
UNDEFIND_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN.
START-OF-SELECTION.
Re: getting the description
<b>Reward if usefull</b>

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Table Control on a report selection screen -not a dialog transaction screen

Hi
Does anyone know of a way to have table control functionality on a report selection-screen? The program needs to be able to run as a background job (ie cannot be a dialog transaction) and we need to be able to save variants with the selection-screen values.
Any help would be appreciated.
The key point is we want to allow the user to enter a dynamic number of rows of table data on the selection-screen, save a variant containing that data and execute the program with the variant as a background job.
Thanks
Nicole Knight

Hi Nicole,
The main problem is how to persist the data. If you are not able to create a couple of tables then you could always utilise TVARV instead. On a similar line to my original post you could have the button call a dialog transaction. In here you could do your normal GUI table control. When saving the data simply transpose each column into a separate select-option held on TVARV keyed by the 'variant name' + fieldname. Then retrieve and transpose this back when executing the report.
Other methods could be storing the data in cluster xy (see EXPORT TO DATABASE command).
This seems a bit overkill for what would be a couple of maintenance dialogs.
Cheers,
Pete
PS. The view cluster is just a way of hierarchically performing table maintenance across multiple related tables. It offers a good UI for this purpose (header and item config tables) and is utilised extensively in the IMG.

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Object text not coming in report selection screen

Hi,
i have an object task type for which text has been loaded.this is included in one reports selection screen.But in F4 only kee is displayed and not text.If check button is pressed text is displayed besides key.Also text doesnt come after report is executed.
please help.
Thanks,
Prasanna N.

Hi Prasanna,
In the Query Designer goto the properties of the required object that you want to display key and text for it, Select the Key and Text Display option. Then you can see in report key and text for that object.
Hope this helps.
Veerendra.

ECCS : custom characteristics into standard report selection screen

Hello guys,
I have added a custom characteristic which is also a subasignment to the EC-CS module.
This field now appears into the standard report selection screen as expected.
I want to define this field as a mandatory selection field, do you know if this is possible? (exemple of standard report CX34A)
Thank you in advance for your help
best regards
Pascal.

Hi Thereza,
This field is already flaged
I have found the following solution : create a variant and assign it to the standard transcation with transaction SE93..
Best regards

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

Number of Entries icon should come on report selection screen

Hi,
In my requirement, I want Number of Entries icon on my report selection screen.
Means when i insert the required selection parameter's, then i want to see the total number of entries, which is come after the execution of my report.
Please let me know that how can i do it...
Regards..

HI.
Check the link display number of line items in my report at the title bar
I have extract the part from the above link.
if u want to display the no of line items, as shown in SE16, u create a SET STATUS with a push button with name No of Entries on the report screen.For that status, u write the code as to display no of lines in ur table by using either
DESCRIBE TABLE itab LINES lin.
lin gives the no of line items.
or
select count(*) from vbap.
write sy-dbcnt.
U got require output, when ur pressing No of entries button, then this will display on the output screen.
Thanks and Regards
Sachin Sharma

HT1391 After deleting a purchased video that, then re-downloading I now have the same exact video showing twice in iTunes & iPhone. How do I get one to go away?

After deleting a purchased video that, then re-downloading I now have the same exact video showing twice in iTunes & iPhone. How do I get one to go away?

Verify/repair your disk first (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, and making sure that there's enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it's running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
BTW, you haven't answered which mailbox has the problem. I could be that just rebuilding that mailbox fixes it -- you should verify/repair the disk and make a backup copy of the Mail folder first, nevertheless, though.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

Match code in report selection screen does not show any values for 0FISCPER

Hi Experts,
I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
Thank you,
Michal

Hi,
maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
<removed by moderator>
Michal
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

Table control in report selection screen

I have a selection screen with some fields. Now, below these fields, I need a table control in which i will have input parameters with 3 fields so that i can enter data in combinations and use the same while executing the report like an internal table.
1. I should be able to save it as a Variants.
2. I should be able to schedule a background job.
I found similar notes but they dont help me save variants and with job schedules.
Request your help in this regard.
Regards
Kasi

Hi
In the selection-screen u can generated a tabstrip:
SELECTION-SCREEN BEGIN OF TABBED BLOCK MAX FOR 22 LINES.
SELECTION-SCREEN TAB (25) TABS1 USER-COMMAND UCOMM1
DEFAULT SCREEN 100.
SELECTION-SCREEN END OF BLOCK MAX.
So the system'll generate a tabstrip in the selection-screen, here it'll load only the screen 100.
By screen painter u have to create a subscreen 100 where u insert your table control.
Max

In Reports Selection Screen Same Data is showing twice

Similar Messages

Maybe you are looking for