In Request type, what is the difference between action 'Change user' and 'Assign object'

Dear All,
I have used only 'Assign Object' for my 'Change User' request type. But the standard request type has 'Change user'. So, could you suggest , what additional purpose does Change Object serve
Regards
Plaban

HI Plaban
not sure if you answered your own question here?
Change User - by itself would allow update of address data, user parameters, defaults, etc
Assign Object - as you mentioned roles and profiles.
However, if assigning, I think you need to have both actions: change and assign
I recall (ages ago) that change was only the user details and not the role or profiles. As a result, there were a few threads where people had to update the action for the request type of provisioning would not occur.
This is something you could test
Regards
Colleen

Similar Messages

  • What is the difference between organisation payment method and Assignment payment method?

    What is the difference between organisation payment method and Assignment payment method?
    As i am a new bie, i am curious to know this though it might sound a silly question.
    Thank you,
    Kuton

    You can create an Organization payment method of any Payment type(Cash, Check, BACS, NACHA etc) under the same country.
    All these will be valid payment methods on the payroll description form.
    And you can even attach these to a person.
    In which case you will have a Base currency (say USD) and payment currency (say GBP).
    These cases are not normal and only used by people who use a single BG for paying employees in 3-4 countries.
    So, unless you need to pay in different currencies, do not use it.
    Cheers,
    Vignesh

  • What's the difference between an audio INPUT and AUX object?

    Can someone explain the difference between an audio INPUT and AUX object? They both seems to do pretty much the same thing ... when would you use 1 over the other?

    revDave:
    Suppose you're recording a guitar track and you want to add a very gentle compressor to avoid overload during the rec process. you need an audio input channel with a compressor inserted. this way, your guitar will be recorded with the compressor processed. If you use audio and midi gear and want to bounce your material, put all your midi audio in an audio input channel.This way, you don't have to use a real audio channel to record them. You can hear them, even use some plugins, and have them bounced with your audio channels.
    Now, suppose you recorded three vocal channels, and want to use an equalizer. You need an aux object to send your vocal channels and use only one eq. This is very useful when you have similar materials recorded in diferent channels (2 guitars, vocals, pete/sax/bone, and so on). Send their outs to an aux object, insert the fx you want, and set the aux object's out to the main out of your project, and it's done.
    I hope it helps you.
    Tovinho

  • What is the difference between WebLogic Server users and Portal users

    Hi All
    What is the difference between users created in the WebLogic server and those
    created from the webLogic Portal Admin console.
    - leo

    Hi Leo,
    The WebLogic server console allows you to create users in the File realm (
    http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1057106 , "Defining
    Users" ).
    The WebLogic Portal Admin console creates Portal users in the alternate security
    realm that was written to store user/password in the Portal schema. This realm is
    com.bea.p13n.security.realm.RDBMSRealm. See the javadoc for RDBMSRealm at (
    http://edocs.bea.com/wlp/docs40/javadoc/wlp/com/bea/p13n/security/realm/RDBMSRealm.html
    For information on alternate security realms see
    http://e-docs.bea.com/wls/docs61/security/prog.html#1041025 , "Writing a Custom
    Security Realm".
    For information on the File realm see
    http://e-docs.bea.com/wls/docs61/ConsoleHelp/security.html , "Security" and also
    search the WLS 6.1 docs for "File realm" for lots of other references.
    Leo wrote:
    Hi All
    What is the difference between users created in the WebLogic server and those
    created from the webLogic Portal Admin console.
    - leo--
    Ture Hoefner
    BEA Systems, Inc.
    2590 Pearl St.
    Suite 110
    Boulder, CO 80302
    www.bea.com

  • What is the difference between lock mode E and X.

    what is the difference between lock mode E and X.

    Hi
    The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table
    Lock modes:
    S (Shared):
        Several users (transactions) can access locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock set on an object that already has a shared lock will be rejected.
    E (Exclusive).
    An exclusive lock protects the locked object against all types of locks from other transactions. Only the same lock owner can reset the lock (accumulate).
    X (eXclusive non-cumulative):
      Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. Each further lock request will be rejected.
    O (Optimistic):
      Optimistic locks initially behave like shared locks and can be converted into exclusive locks.
    If it is helpful rewards points.
    Regards
    Pratap.M

  • What is the difference between Action & Workflow?

    hi,
    What is the difference between Action & Workflow?
    regards,
    babu

    Hi,
    Actions
    Actions are important for maintaining and improving business relationships. You can schedule and start predefined processes with the Actions component by means of user-definable conditions from transaction and marketing objects.
    You can tailor the type and time of actions to the requirements of your customers and the processes in your company. This component enables you to match your service, sales and distribution management, and your campaign management even more closely to customer needs, and, simultaneously, to automate them
    In simple words Actions are automatic actions that are configured to occur in business transactions (activity, sales order, quotation etc.) as a result of particular condition like change of status to let us say "in process" from "open".
    Workflow:
    The automation of a business process, in whole or part, during which documents, information or tasks are passed from one participant* to another for action, according to a set of procedural rules.
    *participant = resource (human or machine)
    SAP Business Workflow is the R/3 tool for handling the process automation within R/3 or between R/3 systems and other systems involved in the business process. It is flexible enough to handle ad hoc processes such as the circulation of an electronic document. It is robust enough to handle mission critical process in the production system such as the creation of a material master.
    The different R/3 applications supply standard workflows for the commonly occurring processes. Once these workflow templates are activated, they are ready for immediate use. A complete set of workflow tools, including the workflow editor and workflow generation wizard, are provided to enhance these standard workflows or create new workflows. These tools are complemented with transactions for monitoring, tracking and the statistical analysis of the processes.
    Because the business process often does not step at the R/3 boundary, various interfaces and third party tools are available for extending the process across systems.

  • What is the difference between version 4.7EE and ECC 5.0

    DEAR EXPERTS
    what is the difference between version 4.7EE and ECC 5.0?WHAT ARE THE ADDITIONAL FUNCTIONALTIES IN
    ECC 5.0?

    hi,
    Diff between 4.7 and ECC 5.0:
    1. 4.7 is on R/3 platform, while ECC 5.0 is on mySAP ERP 2004
    2. ECC 5.0 is having ESA(enterprise Serviceoriented Architecture)
    3.ECC 5.0 is web enabled with Netweaver technology.
    mySAP ERP is the "newer" ERP with numbering conventions like ECC (which stands for ERP Central Component) 5 or 6
    mySAP (aka mySAP.com) Business Suite contains Solutions like CRM, SCM etc. The important thing to note here is that this contains mySAP ERP, the one above
    mySAP All-in-One Solution is designed for smaller companies (the ad that says SAP is not just for large companies but for great companies where the above mentioned functionality is scaled down and is made to run on one database on a PC type of setup as opposed to the full blown architectures on which SAP traditionally set to run

  • What is the difference between action and workflow? How do I decide that I need an action in a transaction and not a workflow and vice versa?

    Dear Experts,
    I have few doubts and request your expert inputs to clarify my doubts.
    What is the difference between action and workflow? How do I decide that I need an action in a transaction and not a workflow and vice versa?
    Your earliest response is highly appreciated.
    Thanks,
    SMTP

    Hi SMTP,
    First of all, as I mentioned action is nothing but an executable work item which is designed in the workflow itself. In other words, Workflow is like your OOPS class. At run time, workflow instances are created just like objects of classes. Now, the steps designed in the workflow are called TASKS and the instances of tasks are called WORKITEMS. Now, the work items where any user action is required are called executable work items. ANd the work items where no user action is required (for example, sending an email in background) are called non-executable work items.
    Whether to go with development of workflow or not depends upon your business scenario. If your requirement is only to send an email and you find any BAdi or exit where in you can write your logic then there is no need of creating a workflow. If there is a defined business process with defined users and time lines, then you can go with the development of workflows.
    Rest, the below link will help you in understanding basic concepts of workflow :
    Why use SAP Workflow? | Insight Consulting Partners
    Regards,
    Richa

  • What is the difference between Macs Voice Over and the text to talk feature

    what is the difference between Macs Voice Over and the text to talk feature

    Voice Over doesn't need someone to type in the text first. Voice Over works with specific screen displayed information so that a blind person can know where his/her cursor is or what is being displayed. Although it is an application of text to talk it's more than the text to talk feature.

  • What is the difference between qued delta  update and serialized delta upda

    what is the difference between qued delta  update and serialized delta update?

    Hi Ks Reddy,
    Queued Delta:
    In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
    Direct Delta:
    In case of Direct Delta LUW's are directly posted to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUW's are directly posted to Delta Queue (RSA7) the application is kept waiting untill all the enhancement code is executed.
    Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
    https://websmp102.sap-ag.de/~sapdownload/011000358700007535452002E/HOWTOCREATEGENERICDELTA.PDF (need id)
    http://help.sap.com/saphelp_bw33/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
    Business Intelligence Performance Tuning [original link is broken]
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    How to load data
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    Delta Types and methods;�
    Hope this helps.
    ****Assign Points if Helpful*****
    Regards,
    Ravikanth

  • What is the difference between generate partner profile and creat partner

    What is the difference between generate partner profile and creat partner profile ?

    Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
    The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
    Generation of Partner Profiles
    The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
    • ORDERS
    • ORDCHG
    • ZINVRV
    • ORDRSP
    • INVOIC
    • FIDCMT
    • The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
    • This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
    • The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
    Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
    generate partner profiles tcode BD82
    creating partner profiles tcode WE20
     There are two methods for maintaining the partner profile:
     Maintain partner profile manually:
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
     Generate partner profile:
    Prerequisite: The current distribution model is distributed to all participating systems.
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
    Regards
    Vasu

  • What is the difference between Recon. Account and Alternative Recon. Accoun

    hi
    any body please tell me . What is the difference between Recon. Account and Alternative Recon. Account.

    Hello sairama,
    Reconciliation account- For each subledger account , you must keep at least one reconciliation account in the general ledger. When you post to an account in the subledger, the system automatically posts to the corresponding reconciliation account. The "Receivables from goods and services" account is an example of a reconciliation account for customers. Enter Customer in the Reconciliation account for account type field. Enter a Vendor in this field for a vendor reconciliation account. Using the reconciliation account procedure, it is possible to create a balance sheet and a profit and loss statement at any time, since the amounts posted to subledger accounts are also posted automatically in the general ledger.
    During regular reconciliation, you check whether the balance of the reconciliation account matches the balance of the corresponding subledger account.
    You define reconciliation accounts by specifying in the G/L account master record the account type (such as fixed assets, vendor or customer) for which the account is to be used. In this way, the account can only be assigned to accounts in the corresponding subledger. You set the assignment of the subledger account to a reconciliation account in the master record of the subledger account. You cannot post to reconciliation accounts manually .
    ============================================================
    Alternative Reconciliation account- Special G/L transactions are identified by a special G/L indicator. The system uses the specifications (posting key and special G/L indicator) to determine the alternative reconciliation account.
    When you post a special G/L transaction, the system does not post to the normal reconciliation accounts but instead automatically to alternative accounts, that is, special G/L accounts. Consequently, you do not transfer the balances of these accounts either. Instead, the system posts to the appropriate accounts automatically when the open items are transferred.
    Hope I had been able to help you. Please assign points.
    Rgds
    Manish

  • What is the differences between T=0 protocol and T=1 protocol?..

    Hi friends..
    Sorry, i want to know what is the differences between T=0 protocol and T=1 protocol?..
    Which one is the best, Java Card that support for T=0 protocol and Java Card that support for T=1 protocol?..
    Thanks in advance..

    Sebastien_Lorquet wrote:
    Such protocols have NOTHING TO DO with javacard. They have been existing for YEARS before javacard was invented.
    It's just a mean to exchange data with any card. It happens to be a standard, so javacards among others use it to communicate with the host.
    the Javacard spec by itself does not know anything about how the APDUs are exchanged . It can be T=0, T=1, T=14, RS-232, GPIB, USB, ISO14443, Felica, Ethernet, Firewire, a satellite link, a deep space link, or anything you want. The comm part is the responsibility of the card operating system, which is out of scope for the javacard machine that lies onto it.
    Just because you have a convenience method in the APDU class does not mean this is real. It's up to the card / os manufacturer to define these things, it's reasonable to think they are accurate, but I can create a javacard that claims to be contactless and still will use T=0. That's arbitrary.This is not exactly true. For APDU response chaining to work on some T=0 cards (when using smartcardio that handles response chaining for the developer) we had to use some special tricks. It can also be handy to only allow certain actions on the contact interface (such as admin actions etc) to prevent unauthorised access. The [PLAID Applet|https://www.govdex.gov.au/confluence/display/PLAID/Home;jsessionid=9B9EC664A01EC13B098DDF4EE5760A0A] (developed by the Australian fegral government agency Centerlink) only allows the card to be initiliased through the contact interface.
    - T=0 requires a GET RESPONSE additional exchange only for case 4 commands or when the command provides more bytes than requested for an outgoing command. It can also require more than two exchanges if the terminal requests the outgoing data per-block.Don't forget case 2. The GET RESPONSE is at TAPDU layer and is handled internally by smartcardio/PCSC etc and is also handled by the smartcard OS.
    Leonardo, if you want to know the differences between the two, I recommend reading ISO7816-3.
    Cheers,
    Shane

  • What is the difference between string != null and null !=string ?

    Hi,
    what is the difference between string != null and null != string ?
    which is the best option ?
    Thanks
    user8729783

    Like you've presented it, nothing.  There is no difference and neither is the "better option".

  • What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

    Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
    So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
    All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
    I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff" 
    O.o
    A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
    Here is a summarized history of my relationship with Wine:
    Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
    'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
    Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
    So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

    ## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
    For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
    If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
    http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
    The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
    For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
    First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
    Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
    Third, you will need to get MacPorts and configure it. The tutorial should have this data.
    When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
    After obtaining wine, to run a program, open the terminal.app window.
    cd desktop/XYZ/ZYZ\ WRQ
    The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
    wine th11e.exe
    Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
    It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
    If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

Maybe you are looking for

  • Attachment trouble

    I opened an attachment and can't get rid of it or return to my other messages. No back button or buttons of any kind. Any suggestions?

  • Access permission - unspecified  write

    the default ACP is set to "everyone - for attributes is : read granted,search granted , write unspecified, selfwrite unspecified. Please let me if the password for the user(other than the orcladmin) can be modified if the ACP for write and selfwrite

  • PSE 7 Smart Brush Problem

    WHEN I CHOOSE ONE OF THE OPTIONS ON THE SMART BRUSH TOOL -- BLUE SKY, FOR EXAMPLE -- AND DRAG THE CURSOR FROM ONE CORNER OF THE SKY TO THE LOWER OPPOSITE CORNER OF THE SKY, THE DOTTED LINE BEGINS TO FLASH AND BREAK INTO SEPARATE RECTANGLES  IN ROW AF

  • Field selection of Result recording screen

    Dear all I was wondering, how can I change a field status from "Display" to "Optional" I tried tcode: OQFA, but it seems useless. I want "QAMKR-DUMMY10" this field to be editable, Please help me to do this. Thanks.

  • Pavilion dv4-1275mx notebook - once-flashing leds @ caps lock and scroll keys @ start-up

    My HP Pavilion dv4-1275mx notebook runs Windows Vista Home Premium service pack 1 for 64x-based systems.   Recently, when I turn it on, the led lights @ the caps lock and scroll keys repeatedly flash once. I'm not sure what, if anything, happened pri