In Restore mode - how long does it take? It keeps looping? HELP!!!!
Hi - I have had NO problems with my iPhone until I have recently tried to upgrade the software through iTunes.
During the update, the phone was unplugged from the USB cord. Now when I connect it to the Restore, it gets 'stuck' on the Restoring iPhone Software part. I have an apple logo on my phone and that circle keeps turning and turning. It turned for about an hour and a half when I unplugged it because I thought it was stuck. I tried the reboot (holding the home button and the sleep/wake button) and now I get the 'sync to iTunes' pic whenever I turn on my iPhone. I am trying a Restore again, and the same thing is happening.
Am I just impatient or should the restore take over 1.5 hours? I am not getting any error messages but the progress bar on the Restoring iPhone software... is full but the little wheel on the phone just keeps turning.
I am SO upset as I need my phone for work and now I just keep getting the sync to iTunes pic and NO PHONE!!! HELP PLEASE!!! Do I just wait it out or is something wrong? (FYI - I am on a PC)
Message was edited by: karenadams
Does your computer have USB 2 ports, or USB 1.1? USB 2 is 35 times faster than USB 1.1; a restore takes about 10 minutes with USB 2, so I would not be surprised if it takes 6 hours on USB 1.1. It also may not finish at all. Next check that the phone is fully charged, that it connects directly to a USB port on the back of the computer and not to a hub, and that there are no other power-using devices connected (Printer, keyboard and mouse are not power-using).
Similar Messages
-
Please help me?
Hi
To reset your security questions you will need to contact apple either by phone or email, many people have asked this question before and most have all ended up contacting apple
Hope this helps -
IPhone Restore: How long does it take?
My iPhone needs to be restored. How long does it take to restore and then restore the iPhone from the backup?
Hard to say, it depends on your iphone model, the data to back up and the number of apps installed adding their part of data to the backup.
If you copy all the pictures from the camera roll before and delete the original files, it should be under one hour, close to 30min using a 3G. Also transfer your videos before you start.
See what else is part of the backup: http://support.apple.com/kb/HT1766 -
How long does it take to restore firmware on iphone5.The phone is only 3 week old and has been in recovery mode for nearly 3 hours now?
- No. That is too long. What does the status bar in iTunes say the iPod is doing?
- Terminate the sync. Force close iTunes if necessary then reboot the computer. Also reset the iPod. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try again. If still problem come back with what the status bar says when it stopped. -
no i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?
it takes hours
it does not damage or wear out hardware
and you can restore any backup afterwards as yo see fit -
I have had to restore my ipad how long does it take its only two weeks old
i have had to restore my ipad 2 how long does it take and its only two weeks old
Depends on what method you chose to restore, wifi or itunes. Speed of internet and of computer. Whether you're restoring to factory settings or from a backup. There are many factors involved.
Without knowing any other info, I would plan on anywhere from 30min. to 2hrs -
How long does it take for Iphone 5 battery to drain? its stuck in recovery mode
how long does it take for Iphone 5 battery to drain? its stuck in recovery mode
Well, the two questions you've asked aren't really related, but that being said, you should probably plug it in. You're going to have to restore the software to the device via iTunes.
-
How long does it takes for iTunes to restore software on a 5s?
How long does it takes for iTunes to restore software in a iPhone?
There are three major portions involved in a restore:
1. Downloading the latest copy of iOS to your Mac for installation on the iPhone.
2. Installing the software from your Mac onto the iPhone.
3. Restoring all the contents of your iPhone (except iOS, which was done in the above step).
Step 1 will depend on your Mac's download speed. We are talking about downloading more than 1GB.
Step 2 should take about 10 minutes or less.
Step 3 will depend on how much personal stuff (e.g., apps, photos, music) you had on your iPhone. It might take minutes, or an hour or more. -
HT4859 how long does it take to restore from icloud backup
how long does it take to restore from icloud backup?
Make sure you are using the same Apple ID and password associated with the other iPhone.
New iPhone 4S? Not possible. 5S yes.
Apple - Support - iPhone - Voicemail Troubleshooting -
HT1222 how long does it take for an ipad to restore?
how long does it take an ipad to restore
Welcome to the Apple Support Communities
The restore of the iPad (erase the device and reinstall iOS) takes about 5 minutes or less, but the problem is that iTunes has to download iOS from the Internet, increasing the restoring time -
How long does it take to download and install ios 7.1.2?
hello,
how long does it take to download and install the new ios 7.1.2?
i am in the installation phase but its taking about an hour now and its still trying to load. i cant use my ipod. i really need help because the bar is not moving and the screen is just black with the apple logo and the bar that tells you how much longer you have but its not moving!
please helpIt should only take about ten minutes at the most.
You need to use recovery mode to restore the device > iOS: Unable to update or restore -
So how long does it take to load a 160GB iPod using the Convert Higher ...
I have a 160GB Gen 5 that I bought when first released back in the day when they were $400. Through a number of changes, the most recent being the advent of the Convert Higher Bitrate Songs to 128bit AAC feature, I decided to look at what more music I could store. After all was said and done, I ended up with a bit of a disaster with cover art not being properly applied to the music being played. I decided to *restore the ipod* based on suggestions in the discussion boards, and equally important was following the hints and tips here.
http://www.samsoft.org.uk/iTunes/grouping.asp
The advice is especially important in very large library situations to ensure you have uniqueness in the albums you want to display. Hadn't really given it much thought until I had the ability to see the individual albums for the 40K songs on the iPod via the cover art view.
Finally the point of the post...
*So how long does it take to load a 160GB iPod using the Convert Higher Bitrate option now available in iTunes 9.1?* The specs on my computer are not highend by any stretch, but it's no slouch, and neither of the CPUs are ever pegged. At this point I've lost count of how much time it's taken, but the load is going on 3-4 days. With some breaks in between because I need to check each incremental load to verify there is no cover art corruption, correct bad tags and such, but for the most part the loading is visibly slow, and I'm sure the conversion is the cause. I'm not really complaining at this point, but there is clearly room for improvement. And of course unless there is a redo involved in which case I will get quite cranky.
*I would like to hear the experiences of others.*
Finally to lend a bit more credence to the performance concern, my 32GB iPhone 3GS for only about say 28GB of music takes about 24 hrs to load from a 2.2GHz dual core intel laptop, again using the convert higher bitrate option.With AC power adapter it takes 3-4 hours for a full charge. With the USB charger it takes 9-0 hours for a full charge. I am not happy with them removing the AC charger and other accessoreis at all. It's business but it still stinks.
I know I would rethink my purchase but would most likely end up buying the Micro anyway -
Installing Windows 2003 Server Standard/XP is very slow- how long does it take?
Hello, I'm looking for some ideas here... I tried installing Windows 2003 on my newly build computer, but after 3 hours it still wasn't installed, and seemed to just be really really slow, and not frozen. I ended up giving up and tried putting windows xp on it, but after an hour it still didn't finish installing. I figure there really has to be something wrong here... The only thing out of the ordinary is that I'm using 4GB ram DDR2 667. How long does it take to install windows xp on your system?!?
Things that I've tried have been:
disabled hypterthreading
loaded optimized settings
changed sata to mode II
MSI 945G Neo-F Socket T (LGA 775) Intel 945G ATX Intel Motherboard
Seagate Barracuda 7200.9 ST3160812AS 160GB 7200 RPM SATA 3.0Gb/s
Intel Pentium 4 650 Prescott 800MHz FSB LGA 775 EM64T
pqi TURBO $GB (4 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5400) Unbuffered Dual
POwer: Ultra Xfinity 500Watt ATX +5v +3.3v +12v1 +12v2 -12v +5vsb
BIOS 1.2
Optial Drive: Generic Toshiba DVD1&3 and 2&4 seem to be working okay, I've tested all these combinations (this is just plugging in the memory and looking at the cpu in task manager)
mem1 in slot 1 okay (tested slot 1 okay)
mem1 in slot 1
mem2 in slot 3 okay (test 2gigs in duel channel first set of memory okay)
mem3 in slot 1
mem4 in slot 3 okay (tested 2 gig in duel channel second set of memory)
mem1 in slot 2 okay (tested slot 2 okay)
mem1 in slot 2
mem2 in slot 4 okay (tested the second duel channel okay)
mem1 in slot 1
mem2 in slot 3
mem3 in slot 2
mem4 in slot 4 high cpu
mem3 in slot 1
mem1 in slot 2
mem4 in slot 3
mem2 in slot 4 high cpu
I upgraded to the latest bios, no luck... I haven't run any extensive memory tests, but through the tests i did, it seems that the memory is okay. Given these tests do you think it is more likely a problem with the motherboard running 4 slots? Or maybe some power issue, where the 4 sticks of memory are not getting enough power to work right.
The power supply I am using is Xfinity 500W
+5V/30A +3.3/30A +12V1/16A +12V2/18A -12V/0.6A +5VSB/2.5A
Thanks for your feedback.. -
Sick of interleaving - how long does DLM take
Have had problems with a dishwasher tripping our electric over the past month and this has of course caused DLM to kick in any put interleave on line and limit my IP profile to always be below 60 mb. My data rate is currently 57957 and hasn't increased for the past month steadily dropping from the 60mb ip cap last month when power cuts happened.
Before my connection was working great and my data rate was a lot closer to the Max data rate, currently it is at 57957, Max at 65760. The Max data rate has been as high as 69000, still no increase in IP data rate.
The main thing though is interleaveing, I know that this is controlled by DLm and cannot be turned of directly, but as my IP profile seems to be stuck and steadily decreasing on every connection restart (which the hh5 seems to do on a whim sometimes)
My line stats seem to be ok SNR 6.0\6.0
Line attenuation 18.2
Please can my IP profile be reset to remove my IP cap which would hopefully put me back on fastpath which I had been on for months and months till the power cutssame as mine https://community.bt.com/t5/BT-Infinity-Speed-Connection/Poor-Service-from-BT-adamant-about-problem/...
Please can a mod look at my connection just reset the IP profile please, there are no faults on my line!!!!!!!!!
Re: Poor Service from BT, adamant about problem!
Options
on 28-07-2014 1h09
I feel this is the exact problem I've been having posted on here titled sick of interleaving - how long till DLM turns it off.
Could you check if your 1st hop is around 12 ms (click start, run, cmd, enter, tracert www.BBC.co.uk) my guess would be interleaving has been put on your line too.
If your router resets too many times (mine due to faulty dishwasher tripping electric)
Once this is on it seems to take ages to reset back to normal. Like you I have the hh5 and this will sometimes do a random disconnect (firmware bug or BT messing with connection?) I always see in my event log a cwmp login from bt which will then reboot the router.
Like you my attenuation is very short (18.2) SNR At 6.2 but it seems because my hh5 sometimes just reboots connection ( usually around 2.20am going from event logs) that interleaving will never come off. I have read that it takes 2 weeks constant connection for speeds to return to normal and interleaving to be turned off.
Not happy about my connection for last month, after being very happy for months and months. As soon as DLM has kicked can feel difference especially in pings more than raw speed for me.
Will run down my contract and jump ship as soon as contract runs out if mine doesn't improve.
Message 19 of 20 (7 Views)
Posted from my mobile
Add Tag...
Quick ReplyReply
smoke999
Visitor
Posts: 4
Registered: 26-07-2014
0
Re: Poor Service from BT, adamant about problem!
Options
on 28-07-2014 1h17
https://community.bt.com/t5/BT-Infinity-Speed-Connection/sick-of-interleaving-how-long-does-DLM-take...
Is this the BT backdoor to manange connection?
(172830.560000) CWMP: session completed successfully
22:05:05, 27 Jul.
(172830.320000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:05:01, 27 Jul.
(172826.800000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:05:01, 27 Jul.
(172826.790000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
22:05:01, 27 Jul.
(172826.590000) CWMP: Initializing transaction for event code 2 PERIODIC -
How long does it take for apply to activate your iPhone number for imessage?
I restored my iphone and now it won't let me iMessage anyone and it says it's waiting for activation. How long does it take for apple to activate my phone number for imessage?
Should happen almost immediately. Read here:
http://support.apple.com/kb/ts4268
Maybe you are looking for
-
HP Officejet PRO 8600 paper feed takes over 2 minutes to pick up paper on print job
Once you hit print it takes 2 minutes and 18 seconds for the printer to pick up the paper and print the document. If there are multiple pages for the print job, the second and subsequent pages print immediately after the first one finally, finally p
-
Parameter BP (CRM to R3) for BOR based transaction launcher
Hi, Our requirement is to display R3 sales order(VA03) through IC webclient. The BP no of the confirmed business partner should be shown as default in the Sold to party field of VA03 transactn screen. Steps followed - 1. Created a BOR transaction lau
-
Action buttons are missing at UWL
Hi All, If I have a workflow decision task and I want to approve it from Portal, what all config is required from Portal end. I can not find any decision action buttons which are visible at SAP inbox. Kindly suggest. Regards Devraj
-
Can someone please advise on cables required to connect to PC flat screen that is over 3 years old? Standard PC flat pan
-
I Found a bug. my machine is 4 GB and 150gb HDD. but after i install WIN 7 its started showing 400gB RAM and 1500tb HDD puneeth 9900909697 [email protected]