In RSRT - Is it possible to check request wise data in RSRT only.

Hi,
In RSRT - Is it possible to check request wise data in RSRT only.
Kindly advise me on the same.
Thanks
Bujji

Saveen,
Here is my problem.
I have a infocube in which Material No and Base Unit are there.
I have a DSO in which Material, (Alternate unit, Numerator and Denominator) which are associated to that material are there .
I need to match the same material number from both infocube and DSO and load the associated Alternate unit, Numerator and denominator in the infocube.
Since the infocube is non cumulative, I am not able to build Infoset.
So I added the Infoobjects of (Alternate unit, Numerator and Denominator) to the cube.
Now the cube has Material no, base unit-------For Both data is filled.
and extra Alt unit, Numerator and Denominator- For these data empty.
I need to load the alt unit Numerator and denominator from the DSO for which the Material no matches with the Infocube.
I am not very good in explanation.Hope u understand. Pls adjust with the long text...
Pls help me.
Thanks.
Guru

Similar Messages

How to track request wise data in infoobj

I have a data target(GMATERIAL, info object which is acting as a DT)
I want to track the data in the data target as request wise.
But, it is showing all the data in the text table.
I need only 11 records which are updated in one request.
Is this possible?
Thanks,
shankar.

Hi murali
thanks for ur answer
it is a delta load.
at PSA level it has 24 records and in the transformations there is a end routine.
so in psa i'm able to see the 24 records.
But, in the target it is updating only 11 records. I want to see those 11 records and i need to verify the end routine.
Thanks
Shankar

How to check the expired date of a public key stored in my keyStore

Hello,
I would like to know if there is any possibility to check the expiration date of a public key which is present in my keystore.
I did read the help of keytool but did not found any explanation about that.
Thanks in advance for your answers.
Alain.
Message was edited by:
Philipina

Public key doesn't have an expiration date. Certificate has. Run keytool -list -v and you can read something looks like:
Valid from: ... until: ...

Check what master data was carried with last load

Hello all,
I have an issue. I'm looking for a solution, so maybe you can help me :).
I have the InfoObject A linked to InfoObject B , through a transformation.
I also have a DTP.
Running the DTP , I load master data from A to B.
A and B already contained data, before my load.
How can I check what master data was carried with my last load?
(I don't have the chance to check by request, as if in the case of a cube , for example)
Thank you.

I agree like cube we cannot see the request wise data wise data .
The alternate to this is you are updating the data through the DTP correct .
Goto DTP maintenanve screen and click on the PSA and check the date wise data in that .
I hope you must be awared of which date data you need to see . So you can check from the DTP PSA screen .
Assign marks is the best way to appreciate help

Checking the master data automatically before the payroll run...

Hi Friends,
Can anyone tell me that, is it possible to check the master data automatically before the payroll run.
If any user forget to maintain any important info-type ( like Cost Distribution ) in time of master data maintenance, SAP allow the Payroll system to run the payroll for that employee. Only in time of account posting the user is able to know the problem and due to rectify the problem they have to delete the payroll.
So, I therefore wants to know that is there any check point or can customized any such things, which will check the necessary info-types before running payroll and generate an error massage about the missing info-type and also skip the processing for that person.
With regards,
Diptendu

have
a look at this report
but before that make sure wht are the mandatory infotypes that are maintained to the employee so that u can come to an idea what are infotypes that are maintained for the memployee
se 38 HTWLINFO read the documentation of the is report mmight be useful

Possible to check in Java, if if a package is already in the jar-Cache?

I have an applet, that has only one main.jar in the Cache-Archive parameter.
Because I wanted to reduce the preload-Time, since 1.4.0 I use an index.list file, listing
the rest of jar-Files needed for my applet. So the jar-Files will be only
downloaded to the time, they are needed, if they aren't already in the jar-cache.
The Problem: If the applet needs a new jar-File, that isn't in the jar-Cache, it needs
time to download the package. But the user doesn't see that something happens.
Is it possible to check with JAVA in the applet, if a package is already in the jar-Cache?
If i know this, I'll be able to show the user that the applet is currently downloading a package.

do u mean a file in the JAR?
if yes, yes u can check that.
check this,
public ImageIcon loadImage(String location)
java.net.URL url = null;
url = getClass().getResource(location);
if (url == null) then ...
}

Hi there, i want to buy a registered version of PS CS4 (and an Upgrade to CS6)from a private Person...is there any Possibility to check if the Adobe ID,Licence,User is a real person...or a fake before buying it? Thanks for helping!

Hi,
just got an offer from a private Person, who owns a boxed Version of Photoshop CS4 (DVD) and an Upgrade from CS4 to CS6....he told me that he can transfer the current license to me... now there's one important question for me...
Is there any possibility to check his Adobe-ID (which he already told me) if it's the same adress, name,etc. as he told me...
or if there is an registered Version of PS CS4 owned by this Adobe-ID?
Just like to check if he's a real person or a fake...don't want to buy any stolen or illegal software...or beeing punked after paying the money...
Thank you very much for helping me! :-)
Chriss

Old versions of Photoshop are not marketed by Adobe. Only CS5 can be upgraded to CS6. There are many scams on the web if you find a cheap copy of Photoshop out there its most likely a scam... Be careful.....

Auto Spell Check Requested! Or just move the button, please.

Auto Spell Check Requested! Or just move the button, please.

Thanks for the suggestion. We'll make sure to pass it along.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Is it possible to check the log of IP accounts tha...

I would like to check if certain people have been hacking into my skype and reading my conversations, if not the IP address then would it be possible to check the general location of people logging into your skype?

No Alvin I'm sorry but you can't access a list of used passwords for an Apple ID (or any account for that matter) as it would be consider a security flaw

Is it possible to check the previous backups on a certain backup file for the iPhone.

Is it possible to check the previous backups on a certain backup file for the iPhone. I need to backup and restore the files which were used in the second week of January, but now I am only able to see the latest iteration of the backup. I am assuming that the iPhone backup rewrites on the same set of files. I may be mistaken. Is there any work around to see the old backups? Any kind of help would be seriously appreciated.

You can use zoom: Settings>General>Accessibility.
" A simple double-tap with three fingers instantly zooms in 200 percent, and you can adjust the magnification between 100 and 500 percent."

Is there a possibility to check the date on which an app was re-installed?

I am aware of the purchase history which allows me to see when I first time installed a certain app, but when I delete that app from my iPhone then re-install it from the Cloud on another day, say X, the purchase history doesn't help me seeing this date X, which is for me the re-installation date.
Is there a possibility to check the date on which an app was re-installed?
Thank you

I read that you say the content should be deleted, so I still wonder if they get deleted, especially after I have just noticed this;
Install an App then delete it while it is running in the background. Head to the store again and install it, you will see that the app is still in the background.
I believe some records of the App exist after deleting it, regardless of who can access them. I will try checking with somebody who has a Jailbroken device.

How could it be possible to check the product number here to find that it is not factory reject?, How could it be possible to check the product number here to find that it is not factory reject?

How could it be possible to check the product number online to find that it is not factory rejection?
My product is Iphone 5 by the way.

<https://selfsolve.apple.com/agreementWarrantyDynamic.do>

Is it possible to check DVD contents in Solaris 10 OK prompt?

Hi All,
Is it possible to check DVD contents in Solaris 10 OK prompt without going into OS level? Please advise.
Regards,
Pui Keong

No

Create NSAPI SAF plug-in equivalent to check-request-limits

Hi Masters,
GoodDay. Okay, here's the problem:
I'm a newbie in writing a custom SAF's, & what I'd like to do is to write a SAF which is closer to this one:
+PathCheck fn="check-request-limits" monitor="$ip" max-rps="10" specifically the check-request-limits fn.+
I believe source code of the server is not available so the question is:
How can I get total request of a specific client in a given time (secs for example) [ip->TOTAL_REQUEST_IN_1_SEC]?
char *ip = pblock_findval("ip", sn->client);
//NEED HELP HERE
if (ip->TOTAL_REQUEST_IN_1_SEC < 10 ) {
//my logic goes here
}Any help would do! Thanks in advance!

Source code is out. Check this thread :
Announcing Open Web Server [http://forums.sun.com/thread.jspa?forumID=759&threadID=5360537|http://forums.sun.com/thread.jspa?forumID=759&threadID=5360537]

To check request scoped component in dyn/admin

How do i check request scoped component in dyn/admin console?
I have enabled loggingDebug for my formHandler but none of the debug messages appear in the console.
I need to check the dyn/admin to see if loggingDebug=true.

1004856 wrote:
How do i check request scoped component in dyn/admin console?
Request/Session scoped components will not appears in component browser. You can find them like this:
[1]. In dyn/admin click on Component Browser [http://localhost:8080/dyn/admin/nucleus]
[2]. Suppose you want to open CartModifierFormHandler that is request scoped. then directly append full component path in url after config like below:
http://localhost:8080/dyn/admin/nucleus/atg/commerce/order/purchase/CartModifierFormHandler/
And Gurvinder already mentioned about enabling loggingDebug for such components
-RMishra

In RSRT - Is it possible to check request wise data in RSRT only.

Similar Messages

Maybe you are looking for