In running application can control can be added are not(i,.e graphs)

hi , may I know whether any control(i.e, waveform graphs )on running application in front panel , my device is pxi system with 4461 and 4462 device with labview7.1 version in xp backround.
i am using this in datawirting and data reading.
looking for answer.
with regards

Are you wanting to know if there are any control types other than waveform controls?
Kudos are (always) welcome for the good post. :-)

Similar Messages

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

What version of Mac OS X?
What home page?
What browser?

I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

contact the developer?

CC 2014 on Yosemite shows applications launched after restart (but they are not)

Wondering if anyone else is having this issue. Running Yosemite GM on a late 2009 27" iMac.
All of the apps (except Bridge...which has been extensively discussed) appear to work fine. I routinely use Illustrator, PShop, After Effects, and Audition....no issues...
When I restart my machine, however, and OS X goes to restore all of the apps that were open before restarting...that's when things get strange. In my dock, there are dots below the apps that were open, indicating that they've relaunched....although if I click on one of the icons in the dock to move over to that app, the app launches....it wasn't actually open although it shows as open and running in the dock. Furthermore, if you right click on one of the "running" icons after restart it shows the app as non-responsive and asks if you want to force quit.
It really hasn't made any material difference in my work...like I said, all of the apps work (except Bridge when it comes to previewing AE presets) and it's just mildly frustrating....
Anyone else have this issue?
Thanks
spark

Jeff,
I have two machines, a late 2009 27" iMac running Yosemite 10.10.2 with 12g of ram, and an early 2009 17" MacBook Pr with 8g of RAM, same OS.
Creative Cloud runs perfectly on the MacBook Pro, all the apps hang on the iMac. I have disabled every extension, I have deleted CC and reinstalled, I have deleted all the apps and ran the cleaner and reinstalled everything, they still hang. I use dropbox and have unchecked the finder config, both machines. I use FontAgent Pro on both machines. Both machines have Skyfonts. I have no problem with any other app on the iMac or the MacBook Pro. No wifi issues. We just moved here 10 days ago, the problem started then. If it was unseated RAM, other applications would be affected, and they are not. Can you help?
Nancy

After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

ofel wrote:
After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

What is the file?
Where did you get it from?
Allan

Control Flow task colors are not changing in SSIS

Hi,
When I am running my SSIS package colors of "Control Flow" task are not changing from Yellow to Green or Yellow to Red however when I double click on dataflow task I found that colors are getting change for the components available inside dataflow
task. This mean only colors of my control flow task are not changing.
Can anyone help me with this issue. Because of this issue I am not able to find out whether any of my control flow task is running successfully or not espicially in case of "Execute SQL Task"
Thanks

Related thread:
http://stackoverflow.com/questions/9473121/yellow-on-the-control-flow-no-color-within-the-data-flow-whats-going-on
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

PavillionG7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
Shawe

Hi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...

Properties (group and channel) added are not a numeric data type.

I am using a dataplugin to add both group and channel custom properties. The properties are both text and numeric, doubles and integers.
When I create a query in Navigator, I select the custom property using the dropdown, but the operator dropdown only has "=" or "<>". The property displayed in the Data Portal is a float number. I was having this problem when I was adding custom properties using a script. I then tried "Navigatorettings/My DataFinder/Reset/Reset Index", then repopulated my Search Area, using the dataplugin on my raw data files. At this point, all my properties only have the "=" or "<>" operator choices in the query.
So it appears that my properties are numeric in the Data Portal, but string in the Navigator Query.
In advance, thanks
Solved!
Go to Solution.

Hi Bill,
could it be the properties you are talking about are already "optimized" for query?
In case yes, did you do the optimization by script like
Dim oMyDataFinderSettings
Set oMyDataFinderSettings = Navigator.ConnectDataFinder("My DataFinder").GetSettings()
Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "Author_age")
And did you do this, before DataFinder has indexed some of your files?
In case yes, DataFinder has to make a guess the datatype of the property without example - so always "string" is chosen.
(If DataFinder has already indexed some(or better all) files containing the property, DataFinder will "optimze" the property in the datatype which occurs most for this property.)
In case you know the datatype of the property you are about to "optimze", you can provide this information to DataFinder
Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myText", DataTypeString)
Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myInt", DataTypeInt32)
Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myFloat", DataTypeFloat64)
Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myDate", DataTypeDate)
Stefan

Contacts added are not showing up on address book.

I created new contact entries using certain apps, such as SimplyTweet, which did not appear on my Address Book. However, doing a spotlight search on my phone shows those entries exist, but cannot be edited. Anybody else having a similar issue?

Hello everyone!
For all of you out there who have received phone calls, text messages, etc, and have tried adding a contact by means other than directly via the contacts app only to have your contact not show up ANYWHERE (except maybe in a spotlight search), this quick troubleshooting guide is for you.
Disclaimers: This can be performed on an Apple computer, I do not troubleshoot for PC's (however, anyone who knows their way around computers can easily modify the steps for a PC). This method can also be used if you sync your contacts via MobileMe like I do, and should work for the iPhone 3G, 3GS, and 4. I have the latest OS on my iPhone, but it should work with any recent OS. My iTunes has been updated to the most recent version.
Step 1: Open Address Book on your mac. Make sure your address book view is extended to show your groups in the left column. Under groups, everyone will have a group labeled "All Contacts". If that's the only group you have, it's time to create another one. Click the "+" at the bottom of your group column and name your new group whatever you want. For my purposes (as this was an iPhone issue), I named my new group "iPhone Contacts". Do not add any contacts from "All Contacts" to your new group, as this will be unnecessarily redundant. Close Address Book, you're done with it.
Step 2: Open iTunes and plug in your iPhone. Hopefully you have your settings to manually sync when you plug your iPhone into iTunes, otherwise wait until it's synced to continue. Click the "Info" tab in iTunes. The first option is Sync Address Book Contacts. Make sure this option is checked. Under the first subheading, make sure "All contacts" is checked. Below the groups box, there will be a line that says "Add contacts created outside of groups on this iPhone to:" and make sure this is checked as well. (Bonus info- Unless you created a contact directly via the contacts app on your iPhone, that contact ends up in another list. This is why you can't see it right now.) At this moment is where that new contact group you created in Address Book comes into play. Use the drop-down menu to the right of this option to select that group (remember mine was "iPhone Contacts"). Do not change anything else. Now click "Sync" in the bottom right corner of iTunes.
Step 3: Once your iPhone is synced, open the Contacts app on your iPhone. If it opens to a contact list, tap the "Groups" button in the upper left corner of the screen. You should see two or three sections. The top section will simply be "All Contacts". The second section will be titled "From My Mac" and will display both "All from My Mac" and the new group you created in Address Book. If you use MobileMe, you will have a third section titled "[email protected]", under which your MobileMe contact group will fall. Make sure you tap the top group, "All Contacts". You will find those "missing" contacts now listed among all your other ones.
Bonus: If you find you have duplicate contact names but neither contact has a full information card, you can edit the contact, scroll to the bottom and tap the "Link contacts" button, then link your duplicates to insure you have all the info you want.
Success!! If you have any questions, let me know.
Source: Freelance Nerd Herd
Message was edited by: Rivka Elisheva

When iam trying to enter the applications or facebook etc appears"YOU ARE NOT CONNECTED TO ITUNES'?

Hello,
when i am trying to enter the applications or facebook or texaspoker in facebook or internet many times appears that i am no connected to itunes,
what is the problem?
thank you.

I too had this sort of problem yesterday, I was unable to access Facebook with errors showing. I deleted app and then tried to reinstall but it said 'not connected to iTunes error' After browsing various suggestions to enable me to re connect to iTunes the only way was to reset network settings. Go to Settings wifi and reset network settings. The device will reboot and you will then have to input router password if required and all should be ok again. Hope this helps

WS not created in application server control after deployment

Hi,
I just tried to deploy fulfillmentESB project(SOADemo Projects) from Jdev to Oracle App server control. But there was no webservice created in Oracle application server control under webservices link....plz help me...
Actually the steps which i had followed to deploy that fulfillment project are:
* right-click fulfillmentESB
* select Register with ESB, Integration connection
after which the fulfillment webservice can be seen in ESB control as well as application server control. But i could not able to see webservice created in application server control.
Also i tried deploying the fulfillmentESB using EAR file - no use
So kindly give me some steps to solve this issue...
-Indhu

Here is an example of the two steps required to deploy a Web Service application, using the ant task for the 10.1.3.x release.
<project name="CalculatePrice" default="all" basedir="." xmlns:o="antlib:oracle">
<property file="build.properties"/>
<property name="deployeruri"        value="deployer:oc4j:${oc4j.host}:${oc4j.admin.port}"/>

<property name="bindweb.website" value="default-web-site"/>
<property name="app.name" value="sdots"/>
<target name="deploy">
    < o :deploy file="${basedir}/dist/${app.name}.ear"
              deploymentname="${app.name}" deployeruri="${deployeruri}"
              userid="${oc4j.admin.user}" password="${oc4j.admin.password}"/>
    < o :bindWebApp deploymentname="${app.name}" deployeruri="${deployeruri}"
                  userid="${oc4j.admin.user}" password="${oc4j.admin.password}"
                  webmodule="webservice-web" websitename="${bindweb.website}"
                  contextroot="/sdots"/>
</target>Not sure if this applies to your specific scenario.
ps. cross posting on the different OTN forums is generally not a good idea as you get threads out of sync. In this specific case, you are running into an issue with a specific ESB demo, and the ESB-SOA forum is definitly a better palce to get specific help.
WS not created in application server control after deployment
ps2. I guess you should got it by now, as I am not the first one to make this comment.
Webservice not created in oracle application server after deployment
ps3. We still don't have details about the versions you are using and the specific about THE SOADemo Projects - provide the information someone else would need in the forum that best correspond to your issue; the SOA one in this case ;-)

WS not found in application server control after deployment

Hi,
I just tried to deploy fulfillmentESB project(SOADemo Projects) from Jdev to Oracle App server control. But there was no webservice created in Oracle application server control under webservices link....plz help me...
Actually the steps which i had followed to deploy that fulfillment project are:
* right-click fulfillmentESB
* select Register with ESB, Integration connection
after which the fulfillment webservice can be seen in ESB control as well as application server control. But i could not able to see webservice created in application server control.
Also i tried deploying the fulfillmentESB using EAR file - no use
So kindly give me some steps to solve this issue...
-Indhu

Here is an example of the two steps required to deploy a Web Service application, using the ant task for the 10.1.3.x release.
<project name="CalculatePrice" default="all" basedir="." xmlns:o="antlib:oracle">
<property file="build.properties"/>
<property name="deployeruri"        value="deployer:oc4j:${oc4j.host}:${oc4j.admin.port}"/>

<property name="bindweb.website" value="default-web-site"/>
<property name="app.name" value="sdots"/>
<target name="deploy">
    < o :deploy file="${basedir}/dist/${app.name}.ear"
              deploymentname="${app.name}" deployeruri="${deployeruri}"
              userid="${oc4j.admin.user}" password="${oc4j.admin.password}"/>
    < o :bindWebApp deploymentname="${app.name}" deployeruri="${deployeruri}"
                  userid="${oc4j.admin.user}" password="${oc4j.admin.password}"
                  webmodule="webservice-web" websitename="${bindweb.website}"
                  contextroot="/sdots"/>
</target>Not sure if this applies to your specific scenario.
ps. cross posting on the different OTN forums is generally not a good idea as you get threads out of sync. In this specific case, you are running into an issue with a specific ESB demo, and the ESB-SOA forum is definitly a better palce to get specific help.
WS not created in application server control after deployment
ps2. I guess you should got it by now, as I am not the first one to make this comment.
Webservice not created in oracle application server after deployment
ps3. We still don't have details about the versions you are using and the specific about THE SOADemo Projects - provide the information someone else would need in the forum that best correspond to your issue; the SOA one in this case ;-)

How to Install Application Server Control on top of AS J2EE Installation.

Hi,
I just installed AS 10g 10.1.2, upgraded it to 10.1.2.3 and applied Jul2008 CPU.
It was initially a simple J2EE install (with only J2EE and OC4J).
It seems there is no EM Application Server Control component since all attempts below failed:
http://host.domain:1156
http://host.domain:1156/em
http://IP:1156/
http://IP:1156/em
portlist.ini
Oracle Management Agent Port = 1157
Application Server Control RMI port = 1850
Application Server Control port = 1156
I am accessing the system (unix servers, etc) via vpn.
Question:
1) How do I verify if Application server control is installed or not installed.
2) How do I install Application server control if the component has not been installed
on top of AS 10.1.2.3 (base 10.1.2 install with 10.1.2.3 upgrade Jul2008 cpu)
Thanks.
Our intent is to use Application Server Control to access Workflow manager
Tried

AS Control gets installed with every install type so it should be there. Refer this for details:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/tools.htm#sthref110
If http://host.domain:1156 doesn't work, AS Control might not be up. Start it using "$OH/bin/emctl start iasconsole". Refer below (mainly point #3 below) for details on what and how to start a mid-tier instance:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/tools.htm#sthref110
Thanks
Shail

Why CAN tools are not showing under Measurement IO in LabVIEW 8.2? NI CAN 2.3.2 is installed

Hi,
The CAN tools/API are not showing in LabVIEW .I am using LabVIEW 8.2 Evaluation Version.
NI-CAN 2.3.2 is also installed. Why it happened?
Anybody please reply

Hi Pree,
NI-CAN 2.3.2 was released in 2005 (before LabVIEW 8.2 got released in 2006) and thus does not support it. Any newer NI-CAN version has support for LabVIEW 8.2 (I recommend using the latest version):
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0EDC?opendocument&node=1...
The NI-CAN readme file lists the supported programming environments.
-B2k

In running application can control can be added are not(i,.e graphs)

Similar Messages

Maybe you are looking for