In SA540 Syslog Summary is empty

Syslog Summary is empty and no log sended to syslog server !! i don't understand it's worked verry well and suddently i have this problem

Best if you raise a ticket with Cisco SBSC and raise your concerns/issues with them and get the to forward them onto the development team. That way it will at least be past on to the relevant team instead of hoping they will read this thread.
Sent from Cisco Technical Support iPad App

Similar Messages

RV220W Syslog Summary, ERROR and WARNING

Hi.
Firmware Version: 1.0.4.17
I have some warnings and errors. And wondering if someone can explain if they are dangerous or can be viewed and deleted?
Syslog Summary:
Emergency:     0
Alert:               0
Critical:            0
Error:               19
Warning:          105
ERROR:
Sun Mar 3 08:37:15 2013(GMT) [RT][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 9 dot11STA 1 failed. status=-1
Sun Mar 3 08:37:15 2013(GMT) [RT][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=1
Sun Mar 3 08:37:52 2013(GMT) [RT][System][PLATFORM] IP:       XXX.XXX.XXX.XXX
Sun Mar 3 08:37:52 2013(GMT) [RT][System][PLATFORM] BCAST:    XXX.XXX.XXX.XXX
Sun Mar 3 08:37:52 2013(GMT) [RT][System][PLATFORM] SUBNET:   255.255.255.0
Sun Mar 3 08:37:52 2013(GMT) [RT][System][PLATFORM] GW:       95.34.60.1
Sun Mar 3 08:37:52 2013(GMT) [RT][System][PLATFORM] DNS1:     193.213.112.4
Sun Mar 3 08:37:52 2013(GMT) [RT][System][PLATFORM] DNS2:     130.67.15.198
Sun Mar 3 08:37:52 2013(GMT) [RT][System][PLATFORM] Interface:eth1
Sun Mar 3 08:40:07 2013(GMT) [RT][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 5 failed. status=-1
Sun Mar 3 08:40:07 2013(GMT) [RT][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=5
Sun Mar 3 08:40:07 2013(GMT) [RT][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 9 dot11STA 5 failed. status=-1
Sun Mar 3 08:40:07 2013(GMT) [RT][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=5
Sun Mar 3 08:40:08 2013(GMT) [RT][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 5 failed. status=-1
Sun Mar 3 08:40:08 2013(GMT) [RT][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=5
Sun Mar 3 08:43:25 2013(GMT) [RT][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 9 dot11STA 5 failed. status=-1
Sun Mar 3 08:43:25 2013(GMT) [RT][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=5
Sun Mar 3 08:45:19 2013(GMT) [RT][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 5 failed. status=-1
Sun Mar 3 08:45:19 2013(GMT) [RT][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=5
2011-01-01 00:00:42: [RT][IKE] INFO: IKE started
WARNING:
Sun Mar 3 07:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 07:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 07:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 07:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 07:56:27 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 07:56:27 2013(GMT) [RT][Kernel][KERNEL] printk: 22 messages suppressed.
Sun Mar 3 07:56:27 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 07:56:27 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 07:56:27 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:11:02 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:40:07 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:40:07 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:45:22 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:45:22 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 08:48:52 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:48:52 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:48:52 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:48:52 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:48:52 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:48:52 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:12 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:12 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:12 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:12 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:12 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:12 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:13 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:28 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:28 2013(GMT) [RT][Kernel][KERNEL] printk: 8 messages suppressed.
Sun Mar 3 08:56:28 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:28 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:28 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:28 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:28 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:33 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] printk: 2 messages suppressed.
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] printk: 1 messages suppressed.
Sun Mar 3 08:56:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:34 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:34 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] WARNING:cvmx_ptr_to_phys() passed a NULL pointer
Sun Mar 3 09:04:49 2013(GMT) [RT][Kernel][KERNEL] cvm_ipfwd_cache_flow: Failed to allocate flow info buffer
Sun Mar 3 09:11:04 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 09:11:04 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 09:11:04 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Sun Mar 3 09:11:04 2013(GMT) [RT][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
2011-01-01 00:00:42: [RT][IKE] INFO: IKE started
Thank you for your help.
Regards Håkon

Thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for this inconvenience you are having, also I am sorry if I can´t give you a complete information regarding this kind of logs, multiple of these are application Port-based Network Access Control, also some of these error are regarding this software, in charge to control all the traffic to give you a extra security. All these logs are security reports which were accessed through wireless.
To answer your question, those are security tracking of all alerts that software gave you, in this case I advise you to keep with this information. I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

LMS 3.2 - Syslog Config fetch not working

Hello,
the syslog config fetch on my LMS 3.2 with RME 4.3.0 is not working.
I get syslog messages from devices and the count in the syslog collector status is okay.
But in the syslog message summary in device center the count is not getting higher with every message.
And the config fetch is not working.
I changed the logging level in the collector-properties to "debug" and got the following messages for a device which I want to fetch:
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssEmblemProcessor - About to process the syslog string : Jun 07 14:40:23 10.155.224.102 53: Jun 7 14:39:57: %SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssEmblemAFormatParser@13bd574
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssEmblemBFormatParser@13adc56
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssGenericFormatParser@157aa53
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.CSSSyslogFormatParser@6f50a8
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemA not valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemB not valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemA valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Setting daemon date
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, After adjusting the offset Mon Jun 07 14:40:23 CEST 2010 GMT 7 Jun 2010 12:40:23 GMT
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parsed using the parser : com.cisco.nm.rmeng.fcss.common.FcssGenericFormatParser@157aa53
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssEmblemProcessor - Valid EMBLEM format. Passing on...
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Converted syslog to filter string. Filter string is 10.155.224.102;;;SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, ^((10\.161\.1\.45);;;(\S+)(-(\S+))?-(.*)(-(.*\s*))?\s*:\s*.*)$
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssFilterPatternSet- inside 6
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, getInterestedSubscribers() - Incrementing filtered count for HNW2K3CISCO03
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, getInterestedSubscribers() - No interested subscribers. Returning null.
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Entered zero size
I attached the AnalyzerDebug.log, syslog_debug.log, SyslogAnalyzer.log and SyslogCollector.log for further informations.
Thanks for any advice!
Sven

After I restarted the processes the syslog queue is empty and the config fetch works :-)
Output from syslog.log:
Jun 15 09:37:51 4.72.80.13 3131: Jun 15 09:36:59.881: %SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
Output from AnalyzerDebug.log:
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,74,Invoking Config collection for syslog message
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,81,Before triggering syslog config fetch
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,83,Syslog Timestamp Tue Jun 15 09:37:51 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,85,DCMA Endtime String 2010-06-10 00:51:02.94
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,90,DCMA Endtime String after formatting Thu Jun 10 00:51:02 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,98,Buffer Time after adding 5 minutes Thu Jun 10 00:56:02 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,101,Triggering fetch on syslog since Timestamp > bufferTime
My last question is now, what can I do that the syslog queue will not getting full one more time?
Is logrot a solution? My syslog.log will be rotated at 128 MB.
Thanks a lot!
Sven

Empty date fields showing in receipt

Why do empty date fields show in the email receipt even though I have the "Include empty fields" de-selected in the email receipts section? Example from receipt shown.
Date 1: 09/13/2013
Date 2: -
Date 3: -
Date 4: -

Hi,
You will get email receipt and email notification if you check both options. email notification will have all fields summary including empty ones if check the option include a summary of the response data in the email.
email notification title is "form name": Response Received.
email receipt title by default is Form Submission Receipt: Adobe FormsCentral
Please share your form to me if you do see empty field in receipt without checked include empty fields. Here is my email address: [email protected]
Thanks,

How do I add a XAML page to a Universal App?

I created a new Blank App. Everything works as it should. Now I want to add a new page. This is the wrong way I'm doing it:
First, I add a new Blank Page to the Windows Project
foo.xml.cs
namespace testapp
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class foo : Page
public foo()
this.InitializeComponent();
Then I add the same class name to the Shared project
foo.cs
namespace ZUMOAPPNAME
class foo
I modify foo.cs to
namespace testapp
public sealed partial class foo
public void shared()
win();
And then add a method to foo.xaml.cs to make it
namespace testapp
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class foo : Page
public foo()
this.InitializeComponent();
public void win()
shared();
The win method can call the shared method.
However, for the shared method, the compiler gives me this error:
The name 'win' does not exist in the current context
What's the proper way to add a new page?

Hi Greg,
Take a look at my blog entry
Strategies for sharing code in XAML-based Universal apps
As Magnus notes, all parts of a partial class need to be in the same namespace to be part of the same class. ZUMOAPPNAME.foo and testapp.foo are unrelated classes.
It's not clear exactly what you're trying to do here, but a common pattern is to have different Xaml for the Windows and WindowsPhone projects but to share data. A good way to do that is to create the new page with the same name (for example: "foo")
in both the Windows and WindowsPhone projects. This will add a foo.xaml and foo.xaml.cs file in each and will define the foo class in both foo.xaml.cs files.
You can then add a foo.cs file in the shared project with your shared functions:
Shared/Foo.cs:
namespace testapp
public sealed partial class foo
public void shared()
do_shared_stuff();
do_plat_specific_stuff();
And call it from the platform specific functions:
Windows\foo.xaml.cs:
namespace testapp
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class foo : Page
public foo()
this.InitializeComponent();
shared();
public void do_platform_specific_stuff()
// do windows stuff
You can use this to mix and match as much as you'd like. If you have very straigtforward UI you may be able to copy the entire .Xaml and .Xaml.cs into the shared directory or you may have platform specific Xaml but share the Xaml.cs file. In most cases you'll
have a mix of platform specific xaml and code and shared code.

How to create a file in application data local folder which is not hidden in windows store app?

I want to create a log file in ApplicationData local folder.
m_StorageFile = await ApplicationData.Current.LocalFolder.CreateFileAsync(m_Name.Replace(" ", "_") + ".log",
CreationCollisionOption.OpenIfExists);
First time when my app is launched, the file gets created and logs are written.
When I close my app, and re run the app once again, the log file that was created is now hidden and when i try to call
the code : m_StorageFile = await ApplicationData.Current.LocalFolder.CreateFileAsync(m_Name.Replace(" ", "_") + ".log",
CreationCollisionOption.OpenIfExists);
m_StorageFile is NULL.
How can i prevent the file from becoming Hidden or ReadOnly.
Thanks

Here is a very simple sample that works fine. Start with this and see what you are doing different.
XAML:
<Page
x:Class="LocalStorage.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:LocalStorage"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d" Loaded="Page_Loaded">
<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
<TextBox x:Name="outputTxt" HorizontalAlignment="Left" Margin="76,82,0,0" TextWrapping="Wrap" VerticalAlignment="Top" AllowDrop="True" PlaceholderText="No Data read from local file" Width="791"/>
<Button Content="Store Data" HorizontalAlignment="Left" Margin="73,145,0,0" VerticalAlignment="Top" Click="Button_Click" />
</Grid>
</Page>
C#
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Runtime.InteropServices.WindowsRuntime;
using Windows.Foundation;
using Windows.Foundation.Collections;
using Windows.Storage;
using Windows.UI.Xaml;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Controls.Primitives;
using Windows.UI.Xaml.Data;
using Windows.UI.Xaml.Input;
using Windows.UI.Xaml.Media;
using Windows.UI.Xaml.Navigation;
// The Blank Page item template is documented at http://go.microsoft.com/fwlink/?LinkId=234238
namespace LocalStorage
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class MainPage : Page
public MainPage()
this.InitializeComponent();
private async void Button_Click(object sender, RoutedEventArgs e)
if (m_StorageFile != null)
try
string userContent = outputTxt.Text;
if (!String.IsNullOrEmpty(userContent))
await FileIO.WriteTextAsync(m_StorageFile, userContent);
else
// should be some info to write
catch (FileNotFoundException)
// do something
private StorageFile m_StorageFile;
private async void createFileOrGetFile()
m_StorageFile = await ApplicationData.Current.LocalFolder.CreateFileAsync("sample.log", CreationCollisionOption.OpenIfExists);
private async void Page_Loaded(object sender, RoutedEventArgs e)
createFileOrGetFile();
if (m_StorageFile != null)
try
string fileContent = await FileIO.ReadTextAsync(m_StorageFile);
outputTxt.Text = fileContent;
catch (FileNotFoundException)
// do something!
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)

Custom MediaStreamSource and Memory Leaks During SampleRequested

Greetings,
I have a nasty memory leak problem that is causing me to pull my hair out.
I'm implementing a custom MediaStreamSource along with MediaTranscoder to generate video to disk. The frame generation operation occurs in the SampleRequested handler (as in the MediaStreamSource example). No matter what I do - and I've tried a
ton of options - inevitably the app runs out of memory after a couple hundred frames of HD video. Investigating, I see that indeed GC.GetTotalMemory reports an increasing, and never decreasing, amount of allocated RAM.
The frame generator in my actual app is using RenderTargetBitmap to get screen captures, and is handing the buffer to MediaStreamSample.CreateFromBuffer(). However, as you can see in the example below, the issue occurs even with a dumb allocation
of RAM and no other actual logic. Here's the code:
void _mss_SampleRequested(Windows.Media.Core.MediaStreamSource sender, MediaStreamSourceSampleRequestedEventArgs args)
if ( args.Request.StreamDescriptor is VideoStreamDescriptor )
if (_FrameCount >= 3000) return;
var videoDeferral = args.Request.GetDeferral();
var descriptor = (VideoStreamDescriptor)args.Request.StreamDescriptor;
uint frameWidth = descriptor.EncodingProperties.Width;
uint frameHeight = descriptor.EncodingProperties.Height;
uint size = frameWidth * frameHeight * 4;
byte[] buffer = null;
try
buffer = new byte[size];
// do something to create the frame
catch
App.LogAction("Ran out of memory", this);
return;
args.Request.Sample = MediaStreamSample.CreateFromBuffer(buffer.AsBuffer(), TimeFromFrame(_FrameCount++, _frameSource.Framerate));
args.Request.Sample.Duration = TimeFromFrame(1, _frameSource.Framerate);
buffer = null; // attempt to release the memory
videoDeferral.Complete();
App.LogAction("Completed Video frame " + (_FrameCount-1).ToString() + "\n" +
"Allocated memory: " + GC.GetTotalMemory(true), this);
return;
It usually fails around frame 357, with GC.GetTotalMemory() reporting 750MB allocated.
I've tried tons of work-arounds, none of which made a difference. I tried putting the code that allocates the bytes in a separate thread - no dice. I tried Task.Delay to give the GC a chance to work, on the assumption that it just had no time
to do its job. No luck.
As another experiment, I wanted to see if the problem went away if I allocated memory each frame, but never assigned it to the MediaStreamSample, instead giving the sample (constant) dummy data. Indeed, in that scenario, memory consumption stayed
constant. However, while I never get an out-of-memory exception, RequestSample just stops getting called around frame 1600 and as a result the transcode operation never actually returns to completion.
I also tried taking a cue from the SDK sample which uses C++ entirely to generate the frame. So I passed the buffer as a Platform::Array<BYTE> to a static Runtime extension class function I wrote in C++.
I won't bore you with the C++ code, but even directly copying the bytes of the array to the media sample using memcpy still had the same result! It seems that there is no way to communicate the contents of the byte[] array to the media sample without
it never being released.
I know what some will say: the difference between my code and the SDK sample, of course, is that the SDK sample generates the frame _entirely_ in C++, thus taking care of its own memory allocation and deallocation. Because I want to get
the data from RenderTargetBitmap, this isn't an option for me. (As a side note, if anyone knows if there's a way to get the contents of an RT Window using DirectX, that might work too, but I know this is not a C++ forum, so...). But more importantly,
MediaStreamSource and MediaStreamSample are managed classes that appear to allow you to generate custom frames using C# or other managed code. The MediaStreamSample.CreateFromBuffer function appears to be tailored for exactly what I want. But there appears
to be no way to release the buffer when giving the bytes to the MediaStreamSample. At least none that I can find.
I know the RT version of these classes are new to Windows 8.1, but I did see other posts going back 3 years discussing a similar issue in Silverlight. That never appears to have been resolved.
I guess the question boils down to this: how do I safely get managed data, allocated during the SampleRequested handler, to the MediaStreamSample without causing a memory leak? Also, why would the SampleRequested handler just stop getting called
out of the blue, even when I artificially eliminate the memory leak problem?
Thanks so much for all input!

Hi Rob -
Thanks for your quick reply and for clarifying the terminology.
In the Memory Usage test under Analyze/Performance and Diagnostics (is that what you mean?) it's clear that each frame of video being created is not released from memory except when memory consumption gets very high. GC will occasionally kick in, but eventually
it succumbs.
Interestingly, if I reduce the frame size substantially, say 320x240, it never runs out of RAM no matter how many frames I throw at it. The Memory Usage test, however, shows the same pattern. But this time the GC can keep up and release the RAM.
After playing with this ad nauseum, I am fairly convinced I know what the problem is, but the solution still escapes me. It appears that the Transcoder is requesting frames from the MediaStreamSource (and the MediaStreamSource is providing them via
my SampleRequested handler) faster than the Transcoder can write them to disk and release them. Why would this be happening? The MediaStreamSource.BufferTime property is - I thought - used to prevent this very problem. However, changing the BufferTime seems
to have no effect at all - even changing it to ZERO doesn't change anything. If I'm right, this would explain why the GC can't do its job - it can't release the buffers I'm giving to the Transcoder via SampleRequested because the Transcoder won't give them
up until it's finished transcoding and writing them to disk. And yet the transcoder keeps requesting samples until there's no more memory to create them with.
The following code, which I made from scratch to illustrate my scenario, should be air-tight according to everything I've read. And yet, it still runs out of memory when the frame size is too large.
If you or anyone else can spot the problem in this code, I'd be thrilled to hear it. Maybe I'm omitting a key step with regard to getting the deferral? Or maybe it's a bug in the back-end? Can I "slow down" the transcoder and force it to release samples
it's already used?
Anyway here's the new code, which other than App.cs is everything. So if I'm doing something wrong it will be in this module:
using System;
using System.Collections.Generic;
using System.IO;
using System.Threading.Tasks;
using System.Linq;
using System.Runtime.InteropServices.WindowsRuntime;
using System.Diagnostics;
using Windows.Foundation;
using Windows.Foundation.Collections;
using Windows.UI.Xaml;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Controls.Primitives;
using Windows.UI.Xaml.Data;
using Windows.UI.Xaml.Input;
using Windows.UI.Xaml.Media;
using Windows.UI.Xaml.Navigation;
using Windows.UI.Popups;
using Windows.Storage;
using Windows.Storage.Pickers;
using Windows.Storage.Streams;
using Windows.Media.MediaProperties;
using Windows.Media.Core;
using Windows.Media.Transcoding;
// The Blank Page item template is documented at http://go.microsoft.com/fwlink/?LinkId=234238
namespace MyTranscodeTest
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class MainPage : Page
MediaTranscoder _transcoder;
MediaStreamSource _mss;
VideoStreamDescriptor _videoSourceDescriptor;
const int c_width = 1920;
const int c_height = 1080;
const int c_frames = 10000;
const int c_frNumerator = 30000;
const int c_frDenominator = 1001;
uint _frameSizeBytes;
uint _frameDurationTicks;
uint _transcodePositionTicks = 0;
uint _frameCurrent = 0;
Random _random = new Random();
public MainPage()
this.InitializeComponent();
private async void GoButtonClicked(object sender, RoutedEventArgs e)
Windows.Storage.Pickers.FileSavePicker picker = new Windows.Storage.Pickers.FileSavePicker();
picker.FileTypeChoices.Add("MP4 File", new List<string>() { ".MP4" });
Windows.Storage.StorageFile file = await picker.PickSaveFileAsync();
if (file == null) return;
Stream outputStream = await file.OpenStreamForWriteAsync();
var transcodeTask = (await this.InitializeTranscoderAsync(outputStream)).TranscodeAsync();
transcodeTask.Progress = (asyncInfo, progressInfo) =>
Dispatcher.RunAsync(Windows.UI.Core.CoreDispatcherPriority.Normal, () =>
_ProgressReport.Text = "Sourcing frame " + _frameCurrent.ToString() + " of " + c_frames.ToString() +
" with " + GC.GetTotalMemory(false).ToString() + " bytes allocated.";
await transcodeTask;
MessageDialog dialog = new MessageDialog("Transcode completed.");
await dialog.ShowAsync();
async Task<PrepareTranscodeResult> InitializeTranscoderAsync (Stream output)
_transcoder = new MediaTranscoder();
_transcoder.HardwareAccelerationEnabled = false;
_videoSourceDescriptor = new VideoStreamDescriptor(VideoEncodingProperties.CreateUncompressed( MediaEncodingSubtypes.Bgra8, c_width, c_height ));
_videoSourceDescriptor.EncodingProperties.PixelAspectRatio.Numerator = 1;
_videoSourceDescriptor.EncodingProperties.PixelAspectRatio.Denominator = 1;
_videoSourceDescriptor.EncodingProperties.FrameRate.Numerator = c_frNumerator;
_videoSourceDescriptor.EncodingProperties.FrameRate.Denominator = c_frDenominator;
_videoSourceDescriptor.EncodingProperties.Bitrate = (uint)((c_width * c_height * 4 * 8 * (ulong)c_frDenominator) / (ulong)c_frNumerator);
_frameDurationTicks = (uint)(10000000 * (ulong)c_frDenominator / (ulong)c_frNumerator);
_frameSizeBytes = c_width * c_height * 4;
_mss = new MediaStreamSource(_videoSourceDescriptor);
_mss.BufferTime = TimeSpan.FromTicks(_frameDurationTicks);
_mss.Duration = TimeSpan.FromTicks( _frameDurationTicks * c_frames );
_mss.Starting += _mss_Starting;
_mss.Paused += _mss_Paused;
_mss.SampleRequested += _mss_SampleRequested;
MediaEncodingProfile outputProfile = MediaEncodingProfile.CreateMp4(VideoEncodingQuality.Ntsc);
outputProfile.Audio = null;
return await _transcoder.PrepareMediaStreamSourceTranscodeAsync(_mss, output.AsRandomAccessStream(), outputProfile);
void _mss_Paused(MediaStreamSource sender, object args)
throw new NotImplementedException();
void _mss_Starting(MediaStreamSource sender, MediaStreamSourceStartingEventArgs args)
args.Request.SetActualStartPosition(new TimeSpan(0));
/// <summary>
/// This is derived from the sample in "Windows 8.1 Apps with Xaml and C# Unleashed"
/// </summary>
/// <param name="sender"></param>
/// <param name="args"></param>
void _mss_SampleRequested(MediaStreamSource sender, MediaStreamSourceSampleRequestedEventArgs args)
if (_frameCurrent == c_frames) return;
var deferral = args.Request.GetDeferral();
byte[] frameBuffer;
try
frameBuffer = new byte[_frameSizeBytes];
this._random.NextBytes(frameBuffer);
catch
throw new Exception("Sample source ran out of RAM");
args.Request.Sample = MediaStreamSample.CreateFromBuffer(frameBuffer.AsBuffer(), TimeSpan.FromTicks(_transcodePositionTicks));
args.Request.Sample.Duration = TimeSpan.FromTicks(_frameDurationTicks);
args.Request.Sample.KeyFrame = true;
_transcodePositionTicks += _frameDurationTicks;
_frameCurrent++;
deferral.Complete();
Again, I can't see any reason why this shouldn't work. You'll note it mirrors pretty closely the sample in the Windows 8.1 Apps With Xaml Unleashed book (Chapter 14). The difference is I'm feeding the samples to a transcoder rather than a MediaElement (which,
again should be no issue).
Thanks again for any suggestions!
Peter

SSL Certificate Exception everytime a connection is established

Hello guys!
I am trying to authenticate a website running SharePoint 2010. But everytime a connection is established, an SSL/TLS exception is thrown. The following is the code I am using. Any idea??
The exception is: "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel."
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Runtime.InteropServices.WindowsRuntime;
using Windows.Foundation;
using Windows.Foundation.Collections;
using Windows.UI.Xaml;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Controls.Primitives;
using Windows.UI.Xaml.Data;
using Windows.UI.Xaml.Input;
using Windows.UI.Xaml.Media;
using Windows.UI.Xaml.Navigation;
using System.Net;
using System.Net.NetworkInformation;
using Windows.Networking.Connectivity;
using System.Net.Http;
using System.Xml.Linq;
using System.Text;
using Windows.Web.Http.Filters;
using Windows.Security.Cryptography.Certificates;
// The Blank Page item template is documented at http://go.microsoft.com/fwlink/?LinkId=234238
namespace TestApp
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class MainPage : Page
public MainPage()
this.InitializeComponent();
private static HttpWebRequest CreateWebRequest(string url, NetworkCredential credentials)
//Initialize new instance of HttpBaseProtocolFilter, which implements IHttpFilter.
string action = "http://schemas.microsoft.com/sharepoint/soap/GetWebCollection";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Credentials = credentials;
req.Headers["SOAPAction"] = action;
req.ContentType = "text/xml;charset=\"utf-8\"";
req.Accept = "text/xml";
req.Method = "POST";
return req;
static string soapEnvelope = @"<soap:Envelope xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'><soap:Body></soap:Body></soap:Envelope>";
//static string soapEnvelope =
// @"<?xml version=""1.0"" encoding=""utf-8""?> <soap:Envelope xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema""
xmlns:soap=""http://schemas.xmlsoap.org/soap/envelope/""> <soap:Body> <Login xmlns=""http://schemas.microsoft.com/sharepoint/soap/""> <username>{0}</username> <password>{1}</password>
</Login> </soap:Body> </soap:Envelope>";
private static XDocument CreateSoapEnvelope(string content)
StringBuilder sb = new StringBuilder(soapEnvelope);
sb.Insert(sb.ToString().IndexOf("</soap:Body>"), content);
XDocument soapEnvelopeXml = XDocument.Parse(sb.ToString());
return soapEnvelopeXml;
private static void InsertSoapEnvelopeIntoWebRequest(XDocument soapEnvelopeXml, HttpWebRequest webRequest)
webRequest.BeginGetRequestStream((IAsyncResult asynchronousResult) =>
HttpWebRequest request = (HttpWebRequest)asynchronousResult.AsyncState;
Stream postStream = request.EndGetRequestStream(asynchronousResult);
soapEnvelopeXml.Save(postStream);
//postStream.Close();
request.BeginGetResponse(new AsyncCallback(GetResponseCallback), request);
}, webRequest);
private static void GetResponseCallback(IAsyncResult asynchronousResult)
HttpWebRequest request = (HttpWebRequest)asynchronousResult.AsyncState;
HttpWebResponse response = (HttpWebResponse)request.EndGetResponse(asynchronousResult);
Stream streamResponse = response.GetResponseStream();
StreamReader streamRead = new StreamReader(streamResponse);
string responseString = streamRead.ReadToEnd();
//do whatever with the response
//streamResponse.Close();
//streamRead.Close();
//response.Close();
private void Button_Click(object sender, RoutedEventArgs e)
NetworkCredential credentials = new NetworkCredential("<user>", "<password>", "<domain>");
HttpWebRequest request = CreateWebRequest("https://the_website_I_am_trying_to_connect_to", credentials);
XDocument soapEnvelope = CreateSoapEnvelope("<GetWebCollection xmlns=\"http://schemas.microsoft.com/sharepoint/soap/\" />");
InsertSoapEnvelopeIntoWebRequest(soapEnvelope, request);


Hi,
According to your description, my understanding is that when you access a https web service, it occurs the “The underlying connection was closed. Could not establish trust relationship for the SSL/TLS secure channe” error.
To overcome this error, you need to install the certificate that is used by the web service provider in the server that will be calling the web service.
Open Microsoft Management Console (Start --> Run      --> mmc.exe);
Choose File --> Add/Remove Snap-in;
In the Standalone tab, choose Add;
Choose the Certificates snap-in, and click Add;
In the wizard, choose the Computer Account, and then      choose Local Computer. Press Finish to end the wizard;
Close the Add/Remove Snap-in dialog;
Navigate to Certificates (Local Computer)
Choose a store to import:
If you have the Root CA       certificate for the company that issued the certificate, choose Trusted       Root Certification Authorities;
If you have the       certificate for the server itself, choose Other People
Right-click the store and choose All Tasks -->      Import
Follow the wizard and provide the certificate file you      have;
Here are some detailed articles for your reference:
http://www.c-sharpcorner.com/uploadfile/anavijai/could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
http://stackoverflow.com/questions/703272/could-not-establish-trust-relationship-for-ssl-tls-secure-channel-soap
Thanks
Best Regards
Jerry Guo
TechNet Community Support
Hello Jerry,
Thank you very much for your reply.
But what about Windows Phone? I am running the same code on´WP 8.1 as a store app, and returns an exception at the same place: the GetResponseCallBack.
Any workaround? Can I run a code from the app that uses the certificate or at least installs it?
Thanks a lot.

ADF Faces Export - All to CSV dose not export the table correctly

Hi ,
I followed the source code of this demo site( http://rcf.us.oracle.com:9008/faces-12.1.2.0.0/faces/components/table.jspx) to create two buttons to export a table to CSV file, one is to export all rows and one is to export the selected rows.
The problem is the export all will generate a html file which dose not have the table content and the selected one works nicely except when I selected all rows than click export selected, it also generates the same html file as export all. The exception at the log on weblogic server and my source code are as below. Thank you!
My jsff source code:
<af:commandToolbarButton text="#{DataObjectBundle.EXPORTALL}" immediate="true" icon = "/images/export_all.png"
id="exportAll">
<af:exportCollectionActionListener type="CSV" exportedId="t8" filename="export.csv" title="ADF Faces Export - All"
charset="utf-8" exportedRows="all"/>
</af:commandToolbarButton>
<af:commandToolbarButton text="#{DataObjectBundle.EXPORTSELECTED}" immediate="true" icon="/images/export.png"
id="exportSelected">
<af:exportCollectionActionListener type="CSV" exportedId="t8"
filename="export.csv" title="ADF Faces Export - Selected Rows" charset="utf-8" exportedRows="selected"/>
</af:commandToolbarButton>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table rowSelection="multiple" var="row" rowBandingInterval="0" partialTriggers="::addRow ::editRow"
summary="#{DesignerBundle.EMPTY}" styleClass="AFStretchWidth"
value="#{pageFlowScope.item.dataSupport.rows}"
editingMode="clickToEdit" binding="#{pageFlowScope.item.dataSupport.table}"
inlineStyle="border-color:Gray; border-style:solid; border-width:1.0px;" id="t8">
Exception on WLS log:
java.lang.ClassCastException: java.util.ArrayList cannot be cast to org.apache.myfaces.trinidad.model.CollectionModel
at oracle.adfinternal.view.faces.export.TableContentProvider.getCollectionModel(TableContentProvider.java:42)
at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderAllDataRows(CollectionExportDirector.java:477)
at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderSelectedDataRows(CollectionExportDirector.java:559)
at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderDataRows(CollectionExportDirector.java:452)
at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderContent(CollectionExportDirector.java:127)
at oracle.adfinternal.view.faces.export.CollectionExportDirector.export(CollectionExportDirector.java:109)
at oracle.adfinternal.view.faces.export.ExportCollectionActionListener.processAction(ExportCollectionActionListener.java:199)
at javax.faces.event.ActionEvent.processListener(ActionEvent.java:88)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:986)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:179)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:123)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:107)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:101)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:759)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:444)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:280)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:254)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:341)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.bi.nanserver.adf.servlet.BIADFServletFilter.doFilter(BIADFServletFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.beam.composer.BeamComposerFilter.doFilter(BeamComposerFilter.java:118)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:303)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:208)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:137)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:225)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3323)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3289)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2176)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2102)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2080)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1567)
at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:254)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
Edited by: 993119 on Apr 18, 2013 1:27 PM
Edited by: 993119 on Apr 18, 2013 1:28 PM
Edited by: 993119 on Apr 18, 2013 1:45 PM

The url you provided tells me that you are an Oracle employee and that you using a version which is not available to the public.
Please post your question in an internal forum.
Timo

How to move or swap two GridView items?

Hi,
am developing a windows store 8.1 app.
I have four GridView items in the GridView like the above figure.
Now i want to swap the GridView Items.
Now i click on 1(GridView Item) and then later i click on 4(Grid View Item)
Then both items has to be swap(4 should be replaced by 1 and 1 should be replaced by 4).
How can i achieve this?
I don't wanna use CanReorderItems="True" AllowDrop="True" CanDragItems="True" these properties to swap.
Any help please?

<Page
x:Class="GridViewItemSwap.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:GridViewItemSwap"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d">
<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
<GridView x:Name="gridview" IsItemClickEnabled="True" ItemClick="gridview_ItemClick" >
<GridView.ItemTemplate >
<DataTemplate >
<Border Margin="12" Width="100" Height="100" Background="Blue" >
<TextBlock Text="{Binding}"/>
</Border>
</DataTemplate>
</GridView.ItemTemplate>
</GridView>
</Grid>
</Page>
namespace GridViewItemSwap
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class MainPage : Page
private int? firstvalue;
private ObservableCollection<Int32> data = new ObservableCollection<int>();
public MainPage()
this.InitializeComponent();
for(int i =0 ; i <4; i++)
data.Add(i);
gridview.ItemsSource = data;
private void gridview_ItemClick(object sender, ItemClickEventArgs e)
if (firstvalue.HasValue )
Int32 secondvalue = (Int32)e.ClickedItem;
var firstindex= data.IndexOf(firstvalue.Value);
var secondindex = data.IndexOf(secondvalue);
data[firstindex] = secondvalue;
data[secondindex] = firstvalue.Value ;
firstvalue = null;
else
firstvalue = (Int32)e.ClickedItem;
在現實生活中，你和誰在一起的確很重要，甚至能改變你的成長軌跡，決定你的人生成敗。和什麼樣的人在一起，就會有什麼樣的人生。和勤奮的人在一起，你不會懶惰；和積極的人在一起，你不會消沈；與智者同行，你會不同凡響；與高人為伍，你能登上巔峰。

CiscoWorks LMS 4.0.1 - some questions

Hello community,
I would like to ask some questions about CiscoWorks LMS 4.0.1.
We are using for a few days, and I can't set some request in the system. I hope someone could help me to customize the CW as I would like to use it.
- We have some Catalyst 6500s, and between them there are Etherchannels. CiscoWorks sends us email because HighUtilization, and it relies on a Gi interface. I read that CW doesn't support etherchannels, is this true.
- I would like to receive email notifications about errdisabled state, etc. I know this is dome by RME, not DFM. The CiscoWorks server acts as Syslog server, too, and it collects the syslogs. I see in the Syslog summary, that the device sends to CW the syslog, but I can't receive email. I did an automated actions, (Monitor-Syslog-Automated actions), I defined the parameters (Facility: *, Sub-facility: *, Severity: 2, Mnemonic: PSECURE_VIOLATION, Description: *), but CW doesn't send me an email.
- I would like to customize interface threshould parameters per device. We have some router with Tunnel utilization 90%, but it's okay because we have a 10Mbit line for the external site. But when our distribution switch ethernet utilization would be 90%, it would be critical. Where can I set these parameters per device/interface?
Thank you for your help in advance.
Ferenc KURIS

If you go to Monitoring > Fault Settings > setup > fault device details
Select the device click view and click the device to open the detailed device view.
There you may see the tu interface under interfaces and set it to managed.
Cheers,
Michel

Nearly give up, how to play RTSP / HLS / Smooth Streaming in Visual Basic Language

I know there are so many samples for playing RTSP / HLS / Smooth Streaming, but it really lacks supporting Visual Basic language, i really struggling to convert from C++ / C# into VB without errors, maybe it would be easier if i can find some VB
examples for this situation, i really appreciated any help.. thanks

Hi HiLLzX,
Did you forget to using reference in VB or Import the namespace? See my current code, using Button click can play a test demo. Do not forget to reference SDk in your project.
XAML:
<Page
x:Class="App242.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:App242"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d">
<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
<Button Content="Button" HorizontalAlignment="Left" Height="88" Margin="52,103,0,0" VerticalAlignment="Top" Width="138" Click="Button_Click"/>
<MediaElement x:Name="mediaElement" HorizontalAlignment="Left" Height="427" Margin="409,127,0,0" VerticalAlignment="Top" Width="800"/>
</Grid>
</Page>
VB:
'using Windows.Media;
Imports Windows.Media
' The Blank Page item template is documented at http://go.microsoft.com/fwlink/?LinkId=234238
''' <summary>
''' An empty page that can be used on its own or navigated to within a Frame.
''' </summary>
Public NotInheritable Class MainPage
Inherits Page
Private extensions As New MediaExtensionManager
Private Sub Button_Click(sender As Object, e As RoutedEventArgs)
mediaElement.Source = New Uri("http://mediadl.microsoft.com/mediadl/iisnet/smoothmedia/Experience/BigBuckBunny_720p.ism/Manifest")
extensions.RegisterByteStreamHandler("Microsoft.Media.AdaptiveStreaming.SmoothByteStreamHandler", ".ism", "text/xml")
extensions.RegisterByteStreamHandler("Microsoft.Media.AdaptiveStreaming.SmoothByteStreamHandler", ".ism", "application/vnd.ms-sstr+xml")
mediaElement.Play()
End Sub
End Class
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Universal app on Windows Phone 10 black screen

Hello,
I received strange feedback that my application has some problems on Windows Phone 10. I can't test this because I don't have any Win10 devices. Can anyone check this app:
https://www.windowsphone.com/en-us/store/app/instabullet/28cffcfa-4568-45e5-820d-fb761b408bdd?signin=true
I have no idea where is the problem. After application starts it loads WebView with login page and on Win10 it is only black screen - at least one user has this problem with Lumia 635. Anyone had similiar problems? It is said that Universal app should work
on Win10 if they work on Win 8.1.

It's a simple page with WebView, frameworks used are Unity, MVVM light.
XAML:
<Page
x:Class="PushBulletClient.Views.WebAuthView"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:PushBulletClient"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:utils="using:PushBulletClient.Utils"
mc:Ignorable="d"
Background="{ThemeResource ApplicationPageBackgroundThemeBrush}"
DataContext="{Binding WebAuthViewModel, Source={StaticResource Locator}}"
xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
xmlns:controls="using:PushBulletClient.Controls"
xmlns:interactivity="using:Microsoft.Xaml.Interactivity"
xmlns:core="using:Microsoft.Xaml.Interactions.Core">
<Grid x:Name="LayoutRoot" Background="{StaticResource BackgroundColor}">
<Grid.ChildrenTransitions>
<TransitionCollection>
<EntranceThemeTransition/>
</TransitionCollection>
</Grid.ChildrenTransitions>
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition Height="*"/>
</Grid.RowDefinitions>

<controls:HeaderControl Header="Login" IconSource="{StaticResource LogoImage}"/>

<Grid Grid.Row="1" x:Name="ContentRoot" Margin="19,9.5,19,0">
<Grid.RowDefinitions>
<RowDefinition Height="*"/>
</Grid.RowDefinitions>
<Grid x:Name="GridLoading" Visibility="{Binding State,
Converter={StaticResource StateIsEqualConverter},ConverterParameter=Loading}"
Grid.Row="0" >
<StackPanel HorizontalAlignment="Stretch" VerticalAlignment="Center">
<ProgressBar HorizontalAlignment="Stretch" Background="{StaticResource BackgroundColor}" IsIndeterminate="True" />
<TextBlock HorizontalAlignment="Center" Text="Loading..." />
</StackPanel>
</Grid>
<Grid x:Name="GridDeclined" Visibility="{Binding State,
Converter={StaticResource StateIsEqualConverter},ConverterParameter=Declined}"
Grid.Row="0" >
<StackPanel Orientation="Vertical">
<TextBlock Margin="0,0,0,20" Style="{StaticResource SubheaderTextBlockStyle}" Text="Declined"/>
<TextBlock TextWrapping="Wrap" Text="You must allow access to use Instabullet."/>
<Button Margin="0,10,0,0" Content="Back" Click="ButtonBack_OnClick"/>
</StackPanel>
</Grid>
<WebView Grid.Row="0"
HorizontalAlignment="Stretch"
VerticalAlignment="Stretch"
x:Name="Navigator"
NavigationStarting="Navigator_OnNavigationStarting"
Visibility="{Binding IsBrowserVisible, Converter={StaticResource BoolToVisibilityConverter}}"
>
<interactivity:Interaction.Behaviors>
<core:EventTriggerBehavior EventName="NavigationStarting">
<core:InvokeCommandAction Command="{Binding NavigationStartingCommand}"
InputConverter="{StaticResource StartingArgsToWebNavigationResultConverter}" />
</core:EventTriggerBehavior>
<core:EventTriggerBehavior EventName="NavigationCompleted">
<core:InvokeCommandAction Command="{Binding NavigationCompletedCommand}"
InputConverter="{StaticResource CompletedArgsToWebNavigationResultConverter}" />
</core:EventTriggerBehavior>
</interactivity:Interaction.Behaviors>
</WebView>
</Grid>
</Grid>
</Page>
CS
using System;
using Windows.Foundation;
using Windows.Phone.UI.Input;
using Windows.UI.Xaml;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Navigation;
using GalaSoft.MvvmLight;
using PushBulletClient.Common;
// The Basic Page item template is documented at http://go.microsoft.com/fwlink/?LinkID=390556
using PushBulletClient.Contracts.ViewModels;
using PushBulletClient.Contracts.Views;
using PushBulletClient.Models;
using PushBulletClient.Utils;
using PushBulletClient.ViewModels;
namespace PushBulletClient.Views
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class WebAuthView : Page, IView
private NavigationHelper navigationHelper;
private ObservableDictionary defaultViewModel = new ObservableDictionary();
public WebAuthView()
this.InitializeComponent();
this.navigationHelper = new NavigationHelper(this);
this.navigationHelper.LoadState += NavigationHelper_LoadState;
this.navigationHelper.SaveState += NavigationHelper_SaveState;
this.Unloaded += WebAuthView_Unloaded;
HardwareButtons.BackPressed += HardwareButtons_BackPressed;
Navigator.Navigate(new Uri(Consts.AppUri));
void WebAuthView_Unloaded(object sender, RoutedEventArgs e)
HardwareButtons.BackPressed -= HardwareButtons_BackPressed;
/// <summary>
/// Gets the <see cref="NavigationHelper"/> associated with this <see cref="Page"/>.
/// </summary>
public NavigationHelper NavigationHelper
get { return this.navigationHelper; }
/// <summary>
/// Gets the view model for this <see cref="Page"/>.
/// This can be changed to a strongly typed view model.
/// </summary>
public ObservableDictionary DefaultViewModel
get { return this.defaultViewModel; }
/// <summary>
/// Populates the page with content passed during navigation. Any saved state is also
/// provided when recreating a page from a prior session.
/// </summary>
/// <param name="sender">
/// The source of the event; typically <see cref="NavigationHelper"/>
/// </param>
/// <param name="e">Event data that provides both the navigation parameter passed to
/// <see cref="Frame.Navigate(Type, Object)"/> when this page was initially requested and
/// a dictionary of state preserved by this page during an earlier
/// session. The state will be null the first time a page is visited.</param>
private void NavigationHelper_LoadState(object sender, LoadStateEventArgs e)
/// <summary>
/// Preserves state associated with this page in case the application is suspended or the
/// page is discarded from the navigation cache. Values must conform to the serialization
/// requirements of <see cref="SuspensionManager.SessionState"/>.
/// </summary>
/// <param name="sender">The source of the event; typically <see cref="NavigationHelper"/></param>
/// <param name="e">Event data that provides an empty dictionary to be populated with
/// serializable state.</param>
private void NavigationHelper_SaveState(object sender, SaveStateEventArgs e)
#region NavigationHelper registration
/// <summary>
/// The methods provided in this section are simply used to allow
/// NavigationHelper to respond to the page's navigation methods.
/// <para>
/// Page specific logic should be placed in event handlers for the
/// <see cref="NavigationHelper.LoadState"/>
/// and <see cref="NavigationHelper.SaveState"/>.
/// The navigation parameter is available in the LoadState method
/// in addition to page state preserved during an earlier session.
/// </para>
/// </summary>
/// <param name="e">Provides data for navigation methods and event
/// handlers that cannot cancel the navigation request.</param>
protected override void OnNavigatedTo(NavigationEventArgs e)
Navigator.Refresh();
this.navigationHelper.OnNavigatedTo(e);
protected override void OnNavigatedFrom(NavigationEventArgs e)
this.navigationHelper.OnNavigatedFrom(e);
#endregion
public ViewModelBase ViewModel
get { return this.DataContext as ViewModelBase; }
private void HardwareButtons_BackPressed(object sender, BackPressedEventArgs e)
if (Navigator.CanGoBack)
Navigator.GoBack();
e.Handled = true;
private void Navigator_OnNavigationStarting(WebView sender, WebViewNavigationStartingEventArgs args)
if (args.Uri.AbsolutePath.Contains("blank"))
Navigator.Navigate(new Uri(Consts.AppUri));
private void ButtonBack_OnClick(object sender, RoutedEventArgs e)
Navigator.Navigate(new Uri(Consts.AppUri));
There is also logic in ViewModel which doesn't contain any specific logic.

Unable to recieve any logs from Sun machine....

Hi,
I'm using Sun Solaris v10 and i have problem in receiving logs from sun machine. The syslog server is my windows which i want my sun machine to sends logs to (windows machine is ALIVE on default port 514).
I have edited the syslog.conf file as:-
t100: Unknown terminal type
I don't know what kind of terminal you are on - all I have is 't100'.
[Using open mode]
"/etc/syslog.conf" 42 lines, 1098 characters
#ident "@(#)syslog.conf        1.5     98/12/14 SMI"   /* SunOS 5.0 */
# Copyright (c) 1991-1998 by Sun Microsystems, Inc.
# All rights reserved.
# syslog configuration file.
# This file is processed by m4 so be careful to quote (`') names
# that match m4 reserved words. Also, within ifdef's, arguments
# containing commas must be quoted.
*.err;kern.notice;auth.notice                   /dev/sysmsg
*.err;kern.debug;daemon.notice;mail.crit        /var/adm/messages
*.alert;kern.err;daemon.err                     operator
*.alert                                         root
*.emerg                                         *
# if a non-loghost machine chooses to have authentication messages
# sent to the loghost machine, un-comment out the following line:
#auth.notice                    ifdef(`LOGHOST', /var/log/authlog, @loghost)
mail.debug                      ifdef(`LOGHOST', /var/log/syslog, @loghost)
*.info @192.168.50.253:514
auth.* @192.168.50.253
*.debug @192.168.50.253
*.* @192.168.50.253
# non-loghost machines will use the following lines to cause "user"
# log messages to be logged locally.
ifdef(`LOGHOST', ,
user.err                                        /dev/sysmsg
user.err                                        /var/adm/messages
user.alert                                      `root, operator'
user.emerg                                      *
)I even have made en entry at /etc/hosts which is given as:-
*192.168.50.253 asad loghost*
All this but my syslog server remains empty of any logs yet.
Is there a way where i could explicitly make Sun machine to generate logs by invoking some methods......as for now its taking for ever to generate logs by the machine.
Please rectify this problem as I have reached a dead-end making sense of the logging mechanism proposed by the sun machine.

Try replacing any space characters in the lines you added to syslog.conf with tabs.

Create ListView ItemTemplate programmatically/dynamically

Hi,
here is my problem:
I have a ListView control on my xaml page. But the data item structure is different from on item to another. Sometimes i need a Grid with 4 columns, sometimes with 5, sometimes with 6. So my idea was to dynamically create the data template and change the
ColumnDefinitions programmatically . But i don´t find a way to do it. I come from the HTML/JS Windows App Devolpment side, and there it is relatively easy to do such things ...

try this:
<Grid>
<ListView x:Name="listview">
<ListView.ItemContainerStyle >
<Style TargetType="ListViewItem">
<Setter Property="HorizontalContentAlignment" Value="Stretch" />
</Style>
</ListView.ItemContainerStyle>
<ListView.ItemTemplate >
<DataTemplate >
<StackPanel >
<TextBlock Text="{Binding GroupName}"/>
<ListView ItemsSource="{Binding Items}" Background="Blue" >
<ListView.ItemsPanel >
<ItemsPanelTemplate>
<WrapGrid Orientation="Vertical" MaximumRowsOrColumns="1"/>
</ItemsPanelTemplate>
</ListView.ItemsPanel>
<ListView.ItemTemplate >
<DataTemplate >
<Border BorderBrush="Yellow" BorderThickness="2" Width="24" >
<TextBlock Text="{Binding Data}" FontSize="18" Foreground="White" />
</Border>
</DataTemplate>
</ListView.ItemTemplate>
</ListView>
</StackPanel>
</DataTemplate>
</ListView.ItemTemplate>
</ListView>
</Grid>
namespace App1
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class MainPage : Page
public MainPage()
this.InitializeComponent();
/// <summary>
/// Invoked when this page is about to be displayed in a Frame.
/// </summary>
/// <param name="e">Event data that describes how this page was reached.
/// This parameter is typically used to configure the page.</param>
protected override void OnNavigatedTo(NavigationEventArgs e)
var d =BuildTestData();
listview.ItemsSource = d;
foreach (var item in d)
Debug.WriteLine(item.GroupName);
private List<MyGroup> BuildTestData()
List<MyGroup> groups = new List<MyGroup>();
List<Detail> c1 = new List<Detail>();
c1.Add(new Detail() { Data = "1" });
c1.Add(new Detail() { Data = "2" });
c1.Add(new Detail() { Data = "3" });
groups.Add(new MyGroup() { Items = c1, GroupName = "First" });
List<Detail> c2 = new List<Detail>();
c2.Add(new Detail() { Data = "11" });
c2.Add(new Detail() { Data = "21" });
c2.Add(new Detail() { Data = "31" });
c2.Add(new Detail() { Data = "41" });
groups.Add(new MyGroup() { Items = c2, GroupName = "Second" });
List<Detail> c3 = new List<Detail>();
c3.Add(new Detail() { Data = "A" });
c3.Add(new Detail() { Data = "B" });
c3.Add(new Detail() { Data = "C" });
c3.Add(new Detail() { Data = "D" });
c3.Add(new Detail() { Data = "E" });
groups.Add(new MyGroup() { Items = c3, GroupName = "Third" });
return groups;
public class MyGroup
public List<Detail> Items
{ get; set; }
public string GroupName
get;
set;
public class Detail
public string Data
get;
set;
在現實生活中，你和誰在一起的確很重要，甚至能改變你的成長軌跡，決定你的人生成敗。和什麼樣的人在一起，就會有什麼樣的人生。和勤奮的人在一起，你不會懶惰；和積極的人在一起，你不會消沈；與智者同行，你會不同凡響；與高人為伍，你能登上巔峰。

In SA540 Syslog Summary is empty

Similar Messages

Maybe you are looking for