In SAP BW, Errors related to authorizations,loading,performance,locking

Hi gurus,
can any one send the document regarding the errors in SAP BW related to authorizations,loading,performance,locking,retraction.Please send it ASAP.

Hi Sudheer,
Check this link which explains you the document on Authorization
<removed link farm>
hope it helps u..........
Regards
chandra sekhar
Edited by: Siegfried Szameitat on Nov 3, 2008 11:01 AM
posting link farms is against the rules.

Similar Messages

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

Hey Good Fellas,
This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
Ok, let's get down to the Business quickly, shall we?
I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
If you look around the SCN, you will probably hit across these threads and so did I.
http://scn.sap.com/thread/3571448
SAP Fiori - UI Add-on SP09 update troubleshooting
With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
I hope this is going to be a good take-away for others who are having Odata handling issues.
The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
Best Regards,
Akshay

Steve,
If you still have the error, this is what I did to resolve mines.
1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
3) Copy that entire row in a notepad for all the fields
4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
5) Save and give that another try.
This is what I exactly wrote in my solution as well.
Akshay wrote:
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
A screen-shot perhaps helps you more.
Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
Let me know how that goes?
-Akshay

Error - No amount authorization for customers/vendors in company code

Hi All,
I'm new to SAP MM. This question has been posted many times but the suggested solutions are not working for me.
Whatever i'm doing related to amounts (either while invoicing through FB60 or while creating down payment request through F-47), I'm getting error "No amount authorization for customers/vendors in company code".
I have already tried following solutions -
1.) Created tolerance groups and assigned to company code via tcode OBA3
2.) Gone to SPRO and assigned 2 tolerance groups to company code (one blank and one created above in Step-1)
3.) Assigned user-id (as in SAP system) to the respective tolerance group.
Still I'm getting below error.
Any inputs on this issue are welcome.

I dont really know why you mentioned that you are new to MM, as this is related to FI.
the error message has number F5 155, the F in the beginning or hte error message number already mentions that it belongs to FInance
If you use SE91 and lookup the where-used list for this number then SAP will show you a few programs, in the detail you can see that SAP checks table T043T
if you then use SM30, enter T043T and click customizing, then SAP takes you to the customizing knot to maintain this table.
which is: IMG > Financial Accounting > Financial Accounting Global Settings > Document > Line Item >
....Define Tolerance Groups for Employees
....Assign User/Tolerance Groups

Error related to GTS system

hello ,
While executing a program /SAPSLL/PREF_AGREEMNTS_SYNC_R3 we are getting the below error in SAP ECC system .
Replicate Preference Agreement Determination from SAP GTS-
Please check the following item -
No Authrization for Activity "03-Display" for Legal Regulation to be checked in area "Prefernce Processing" .
we ran the trace but no error Rc captured in Trace .
Could you please help and let me know what could be the issue here as it doesn't seems to be an issue related to Authorization but more related to config .
Thanks,
Apoorv

Hello Martin ,
Thanks for your response .
we were executing the program in ECC system only with my own User Id and getting the below message in ECC only .
Replicate Preference Agreement Determination from SAP GTS-
Please check the following item -
No Authorization for Activity "03-Display" for Legal Regulation to be checked in area "Prefernce Processing" .
The trace was run in ECC system only . But there was no error RC shown in the trace .
But the error message says No Autorization for Activity Display ...
Hence i am not sure if this is related to authorization or some other issue like Plug in issue etc ..
Could you please help .
Thanks,
Apoorv

Error --1002097 Unable to load database

Hi,
Essbase version 7.
I am having a problem when I am trying to start database or running Essbase give me an Error: 1002097 Unable to load database.(error 1002097 is related to the db corrupt.) this is on PRD server.
we have 2 more server ,(.BS & Dev).
1.I copied the Db from the BS to PRD --- but the application and DB in the PRD system failed to start giving the same error 1002097 .
2.next i did was to migrated the same application from BS to Dev system which went fine and i can see the outline . Application is getting started in the DEV system .
3. Since it was okay in DEV. i migrated the application from BS TO PRD .it got migrated but it is not starting giving me the same error 1002097.
any help will be great.
thanks
ram
Thank you,

Re: How can we Restore a corrupted cube.

Error message while opening a project: "an error was encountered while loading the image"

We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?

Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Content Server Error: 407 Proxy Authorization Required

Hi Experts,
I am new to Content Server and have recently installed Content Server 6.40 with MaxDB 7.8 database on a Windows 2008 server.
The installation completed successfully and IIS server was configured as per guide. The Content server is running when checked through URL on server.
Next, we created a new repository with following details, but are facing "HTTP error: 407 Proxy Authorization Required" while testing the connection.
Settings in OAC0
Content Rep.    A1
Document Area: ArchiveLink
Storage type: HTTP Content Server
Version no.: 0046
HTTP server: <IP of Windows server where CS is intalled>
Port Number     1090
HTTP Script     ContentServer/ContentServer
Transfer drctry C:\temp
HTTP Port 1090 is open from SAP system(HP-UX) to Content Server(windows) and there is no firewall between the 2 servers, but we still see the error in OAC0 and CSADMIN. I also tried setting the security parameter to 0 in contentserver.ini file, but that didn't help either.
The content server was installed using administrator user.
Would appreciate your inputs on what am I missing?
Thanks.
Regards,
Varun

Hi Varun,
Please change Document Area: ArchiveLink .
Remove Archive link and change it to Document Management system ( DMS)
Check the results and post the output.
Regards,
Deepak Kori

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
In my web.config file, I have the following as suggested by many for solution:
<add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
However, the error is persisting. I have no clue how to fix this. Hope someone can help.

Hello FredVanc,
As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
http://forums.asp.net/
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

**** Error from PSA **** while loading 0comp_code (processing- info obejct)

Hi,
I am getting error **** Error from PSA **** while loading info object attributes for company code (0comp_code). I am not using oly info obejct in processing.
below is the error message.
Error from PSA ****
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Scheduler
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
I checked in SM37 in both source system and BW. I do not see any matches. I have tried loading other master data (for eg. customer) and all were successful. That clearly indicates that connection between ECC and BW systems correct (RFC connection, logical systems etc).
please advise.

Thank you for your answers and points assigned.
I am not using PSA in my data transfers i am using info object only option. I am also getting same error even if I use PSA . no change in error message.
when i click on psa in monitor. i am getting below error message.
-No data packet numbers could be determined for request.
detailed error message: (all are in red color)
Requests (messages): Errors occurred (RED)
      -Data request arranged (GREEN)
     - Error in the data request (RED)
Extraction (messages): Missing messages (RED)
        -Missing message: Request received (YELLOW)
       -Missing message: Number of sent records (YELLOW)
      -Missing message: Selection completed (YELLOW)
Transfer (IDocs and TRFC): Missing messages (RED)
Processing (data packet): No data (RED)
please advise and points will assigned. thanks for your help.

Problem installing Circuit Design Suite - "Error while initializing resource loader"

I am attempting to install v 10.0.1 of the Circuit Design Suite (Education and Student Edition). Immediately after starting the install process I get the message "Error while initializing Resource Loader!" and the installer exits. My computer meets the minimum system requirements (512 MB RAM, 20 GB free hard drive space, Windows XP, etc).
Any suggestions for how to work around this problem so I can get Multisim installed?

Hi John,
I'm not sure if you still have issues with the Multisim installer. But just in case here are some comments:
Are you using a CD to install Multisim? If yes, try copying the installer to your hard drive.
Try installing Multisim on a different machine.
Apparently the Resource Loader is related to Java, try un-reinstalling it, upgrading to the latest release, etc.
Let us know how it works,
Fernando D.
National Instruments

How do I fix error message "unable to load sync UI Corel localized.dll"

How do I fix an error message "Unable to load sync UI Corel localized.dll"? All of a sudden I can no longer sync my Windows PC to my iphone. I also noticed that just prior to the problem occuring there was an itunes software upgrade that occurred. It may or may not be related to the problem.

Hi Barrlee,
Thanks for using Apple Support Communities. If iTunes doesn't recognize your iPhone, this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari

Error when many connection load report

Today i deploy website report, i use crystal report 13 for vs 2010 to show report and use crystarl report 9 to design report (about 5 file report).
Report load follow this process:
1/ Execute Store Procedure in Oracle, return a dataset
2/ Load crystal report designed with data source is dataset
3/ Export file crystal report after load datasource to rpt file (correlative with each user)
4/ When user want to view report, crystal report viewer will load rpt file to show.
In one minute have about 3-5 file report are loaded. After a few minute, my website raise this error at step 2:
Load report fail.
System.Runtime.InteropServices.COMException: Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack at
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
I have to restart iis to website run normal. But after a few minute this error still raise ???????????
Now I add option OpenReportByTempCopy in ReprotDoctument.Load funtion, but to Monday i can know this option can solve my problem. Who have idea help me solve this problem? Thanks for read.
Edited by: phatnguyen81 on Jan 22, 2011 4:35 PM

Re. Who can help me???
- Not too many people will be around on the weekend to help you out...
Re. the error on your app.
- Make sure you close and dispose the report object as you get done with it. And consider doing the same with your dataset(s).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Exit Code: 16 Please see specific errors below for troubleshooting. For example, ERROR: DW039 ... Summary - 0 fatal error(s), 1 error(s) ERROR: DW039: Failed to load deployment File

Exit Code: 16
Please see specific errors below for troubleshooting. For example, ERROR: DW039 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File

if this is related to the installation of an adobe product, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

In SAP BW, Errors related to authorizations,loading,performance,locking

Similar Messages

Maybe you are looking for