IN SD project starts from which phase?

IN SD project starts from which phase? End in which phase?

dear srinivas,
for any project there are 5 phases which are calling as ASAP methodology
project preparation is the first phase planning about that project which is the starting phase
golive and support ( which call as continious improvement ) is the last phase
rewards if it helps
siva

Similar Messages

Project started from past

Dear all,
Could you help me on the following question?
Generally speaking, the start date of the project is today.
Now, my project started more than one year ago.
Although I set the start date of the project in 2006, the basic time of the network and activities still starts from today.
How can I make the activities and network start from 2006? How should I configure the scheduling? Please give me some clues.
Thanks a lot.
Judy

In Planning Board under Settings->options, set "Start in the past" greater than 365 and run scheduling. When this entry is blank system rum todays schedule and reset the date to current date.
Venkat

Corresponding Sales Organization of a project, starting from table COVP.

Hello,
I need to find the corresponding sales organization of a project from the table COVP(this is for an interface). The sales organization is in table proj. But to get there, i need a connection. I thought about this connection:
COVP-OBJNR = AFVC-OBJNR - from afvc, take aufpl(Routing number of operations in the order)
AFKO-AUFPL = AFVC-AUFPL - from afko, take pronr(Project definition)
PROJ--PSPNR = AFKO-PRONR.
And from proj, take the corresponding sales organization.
What do you think?I am giving the right connection and all the necessary elements?
PS: This is only for network elements, for WBS elements I know the connection.
Thank you,
Efren
Edited by: Efren23 on Feb 22, 2012 8:55 AM

Hello,
Thanks Gokul.I've found the connections in this link:http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9659.
The only connection that was missing was between COVP and AFVC. But i think so and you agree that the right condition is
COVP-OBJNR = AFVC-OBJNR.
I will leave the question not answered until tonight, maybe others have other suggestions.
Thanks,
Efren
Edited by: Efren23 on Feb 22, 2012 10:33 AM

What versions of After Effects can open project files from which versions?

Since this question comes up a lot, I just created this article that gives the details for all of the versions going back to After Effects 7.0:
"opening After Effects projects from previous versions and saving back to previous versions"

Please look at the Oracle Text reference manual for a list. Ultra Search uses the INSO filters of the underlying Text engine.
--Stefan Buchta

My iDVD project won't start from the menu.

When I create a DVD, it will not start from the menu but goes directly to play. I can force it to the menu by clicking the "Disc Menu" button on my remote, This happens on both of my DVD players, one or which is a Bose system. I didn't have this trouble with DVDs created using my older G5 iMac. This doesn't happen on all DVDs using the newer iMac. I've used the "Revolution" theme and it seems to work OK. For this current project, I used "Full Screen" from the list of older themes.
I'm using iDVD 7.2.1 on an Intel iMac running OS10.6.8
Thanks for your help,
Jim

Go to the Map mode in iDVD and make sure there are no items in the far left hand Autostart bin.
If there is just drag it out, save the project as a disk image, File ➙ Save as Disk Image menu option, and test with DVD Player. If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Happy Holidays

I have had my iphoto crash twice whilst nearing the end of making a photo book. Are these books lost and do I have to start again? ): I cant find the folder in iphoto on the time capsule. Folder from which the book was being made is now empty? help pleas

I have had my iphoto crash twice whilst nearing the end of making a photo book. Are these books lost and do I have to start again? ): I cant find the folder in iphoto on the time capsule. Folder from which the book was being made is now empty? help please Using IMAC OSx

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

How to use identity column in table which value always start from one?

Hi all,
Hope doing well,
sir i created one table which has id with number datatype
for which i created sequence and stored procedure so suppose
i inserted two row there it's inserting and id is showing 1, 2
again i truncate that table and again i inserted value there now the id is starting from 3 , 4
so my question is that after truncating table can't it insert from 1 in id column?
thanks,

>
sir i created one table which has id with number datatype
for which i created sequence and stored procedure so suppose
i inserted two row there it's inserting and id is showing 1, 2
again i truncate that table and again i inserted value there now the id is starting from 3 , 4
so my question is that after truncating table can't it insert from 1 in id column?
>
Oracle does not have 'identity' columns.
Oracle sequences are NOT gap free.
Oracle sequences are independent objects and not associated with any other table or object.
If you are wanting a gap-free sequnece of numbers, which is not recommended, you will have to create your own functionality. And that functionality will not be scalable or perform well.

Creation of WBSE in SAP-PS from all Phase of Project from cProjects

Hi,
Need suggestion for the automatic creation of WBSE in SAP-PS from each phase of Projects from cProjects i.e. multi level controlling scenario
I have done the required configuration of Define Controlling Scenario where for the project type, controlling method has given (Multilevel Controlling (Structure Element, Automatic).
But in my case only one WBSE is getting created for all phse s & project defintion of project in cProjects.
Request you to suggest me on this issue.
Regards,
Ranjan

Hi Vetrivel,
Thanks for your prompt response. These are settings made for multi level controlling scenarios.
1. Project Type:
Accounting Intergation-accounting integration in my SAP ERP, as of relese of the project
2. Define Object Links for Accounting Integration
- 0FIN_INT_ERP_PS Single-Obj. Controlling on WBS Elements
- Search Fields OLR3_TS_PRPS_SHLP
- Proxy Class CL_DPR_OLR3_WBSELEMENT
- 0FRAME9 frame has considered
3. Controlling
- Controlling Scenarios: PS01 Costing Variant
- Then Costing Model has assigned to Controlling Scenarios
- Assignment of Cost Elements to Cost / Revenue rate
Please suggest me if i have missed some things. I am checking the planed cost in CN41 transaction of the PS module. Morever in Project in cProjects costing button is disabled & while doing calculate no planned cost os updating in Projects.
I am following role based costing process. Project Role has defined & employee assiged to Projects.
Thank you in advance.
Regards,
Ranjan

Needs the table from which "project definition" field is to be extracted

Hi,
As a requirement in BW, we have to add the new field project definition in the BW cube 0COOM_C02(description of the cube:- CO-OM: Costs and Allocations Project (Delta Extraction)).For this, we have to add the same in all the data sources related to this cube.
Data sources under this cube are:
0CO_OM_CCA_9 (Cost Centers: Actual Costs Through Delta Extraction)
Take any one of the data source and search that in the R/3 side tcode RSA6, double click and you will find the entire structure (fields) for that data source.Double click the extract structure appearing above it to find the technical details of each field.
Now we have to add the field project definition in the data source.For extracting the same, we have to write the logic which will extract the value of project field from a table.
We dont have any problem in writing the code but
Our requirement is that during coding, from which table we should extract the value ? and also on what basis?(means what should be the selecting criteria for populating that field) .
If you want any information on these data sources, do reply me.
Thanking you in advance,
Tarun Brijwani.

The cube is related to module
Financials Management & Controlling----->Controlling----->Overhead Cost Controlling

In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)-regardless of the site from which I download the installation folder.

In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)—regardless of the site from which I download the installation folder.

Hello everybody, good news: after upgrading to Mountain Lion 10.8.5 I've been able to run the installer and all went fine.
Mountain Lion allows user to force execution through the context-menu (CTRL-click) Open command and it does work, just that simple.
So my advice is: if you want to install or re-install Flash Builder 4.6 on a Mac with Lion installed, upgrade to Mountain Lion or better to avoid problems.
Apple introduced some (not all) Gatekeeper functionalities in 10.7.3 and following, but apparently you need a full-fledged 10.8 to have also what you need to circumvent a Revoked Certificate error.
Since usually OS X has auto updating active, if you are running Lion you end up with 10.7.5 and won't install FB46. If you manage somehow to hold 10.7.2 I suppose you should be able to install FB46, sincerely I didn't check it out. Anyway it's simpler and safer to move on to 10.8.x.
Bye

From which version JVM starts supporting Object bindings in collections.

from which version JVM starts supporting Object bindings in collections.
private ArrayList<String> arr = new ArrayList();
this will bind String objects to arr, nothing else will be stored.
which version of JVM should I confirm, before using this feature!!!
please comment.

thanks MLRon!!!
They are called "generics", not "bindings". In any case, you need Java 1.5 (also known as Java 5.0).Can generics be used anywhere, or only with collections.
for eg:-
public class Abc {
public Abc(Object obj) {
if(obj instanceOf String)
doSomething;
if(Obj instanceOf Xyz)
doSomething;
while creating Abc instance can I use this:-
Abc<String> abc = new Abc("abc");
and could we also do this:-
Abc<String[]> abc = new Abc(new String[5]);
and what exception does generics generate, if we don't obey them.
for eg:-
Abc<String> abc = null;
abc=new Abc(new Xyz);
and should generics code be kept in try catch block!!!
please guide me!!!

I need to know which country imei starts from 01254300

I need to know which country imei starts from 01254300
plzz. help me

read this?
http://en.wikipedia.org/wiki/International_Mobile_Equipment_Identity

Help scheduling tasks from both project start date and from later deliverable dates

I am trying to set up a project scheduling template for a number of similar projects.
These projects will require initial work to be completed at the project start date, working through the critical path to an end date.
However. Certain milestones/deliverables are required on specific dates in teh project (they are recievable by internal customers on firm dates). I am having trouble scheduling my predecessors for these deliverables to occur as late as possible.
I.e. I want my procurement to start x-weeks (depending on the task) before the deliverable is due.
Trying to manually set the deliverable date and hoping project will work back and adjust the predecessors to fit isnt quite working... is this possible?
Im using MSP2010 standard

nategalambos,
Actually this is probably a very common scheduling scenario. Schedules often have interim milestones, sometimes with fixed dates.
Just-in-time scheduling has received a fair amount of press in the past but in my view it has some very real negative downsides. I believe the best plans have contingency built in to allow for unknown problems. For example, let's say you have a task that
must deliver an item on a particular date and in order to build that item you need to order material. You know the built and test time, it's all done by machine, takes 10 days, and doesn't vary from item to item. The lead time for the material is 6 weeks,
so you set up the schedule to place the material order 8 weeks before the delivery date. However, there is a problem, the vendor who supplies the material has a problem at his factory and the material is delayed such that it won't be delivered in 6 weeks but
instead it will take 8 weeks. Because you have not allowed for contingency in your plan, your delivery date is now in jeopardy.
But to answer your question, one way to set up the predecessor you want is as follows. Using my example above, the Place Order task, let's say the delivery date task is task ID 5 and is a milestone. The place order task could have a predecessor of 5SF-40d,
or 5FS-40d will also work if the place order task and the delivery date are both milestones.
Hope this helps.
You might also want to read Trevor's response to a related post on the following forum: http://answers.microsoft.com/en-us/office/forum/office_2010-project/field-for-start-based-on-as-soon-as-possible/45829d8b-b073-4fbf-8126-0bdac5c7684c
John

Get ListItemID from which workflow task was started

In SharePoint 2013 in event receiver (item added) I need to get List item id from which was task started...I have custom list when I add new list item the workflow starts and create new task in task list...After new item is created in task list I need
to get ID(List item id of item which start the workflow) in event receiver of Task list... Hmm...In sharepoint 2010 this work
SPListItem currentTask = properties.ListItem;
Guid sourceListID = new Guid(currentTask["WorkflowListId"].ToString());
SPList sourceList = properties.Web.Lists.GetList(sourceListID, true);
int sourceListItemID = Convert.ToInt32(currentTask["WorkflowItemId"]);
SPListItem sourceListItem = sourceList.GetItemById(sourceListItemID);
but in sharepoint 2013 not...Thank you

hi
try this
SPListItem currentListItem = properties.ListItem;
if(currentListItem != null)
object associatedWfListId = currentListItem["ows_WorkflowListId"];
object associatedWfItemId = currentListItem["ows_WorkflowItemId"];
if (associatedWfItemId != null && associatedWfListId != null)
SPListItem item = web.Lists.GetList(new Guid(associatedWfListId.ToString()), false).GetItemById(int.Parse(associatedWfItemId.ToString()));
// THE ABOVE ITEM IS THE ASSOCIATED LIST ITEM
https://blogs.blackmarble.co.uk/blogs/jmann/post/2008/03/10/get-the-item-a-workflow-task-is-associated-with.aspx
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

My harddrive is put in other computer which doesn't start from my org harddrive, but from its own harddrive. No addons, bookmarks or passwords are showing up

My original harddisk is now called "G" (with partitions H&I). System not able to start from "G". Starts from "C". All original settings and programs still on G. How I get my addons, bookmarks or passwords again in Firefox?
Message sent from different comp, so FFversion and pluginsnot right

See this: - http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

IN SD project starts from which phase?

Similar Messages

Maybe you are looking for