In Search for Automatic Sliding Content with Buttons tutorial
I would like to implement a cross screen sliding content. I would like this content to have buttons which allow to move from one section to another. I would like this buttons to be in the ON position when the corresponding section is on the screen.
I would like it to start and sycle once automatically, yet to have user a control over it with buttons.
Does any one know a good tutorial site where I can find something like that?
check http://www.greensock.com/tag/tutorials/
Similar Messages
-
I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.
How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507
-
How to search for a text node with a particular value in an xml document with labview
supposing i have the following xml document:
<head>
<book>
<bookname>zio</bookname>
<author>dan</author>
</book>
<book>
<bookname>the spear warrior</bookname>
<author>britney</author>
</book>
<book>
<bookname>the beard</bookname>
<author>derrick</author>
</book>
</head>
i want to search for the author of the book "the beard" using for example the V.I Get first match of labview to access the the node with value "the beard" and then use Get next sibling V.I and Get node text content to get get the author of this book..so my question is how do i write the xpath expression for Get first match so as to access the node with bookname "the beard" instantyly? am trying to minimise the use of loops because they increase the time duration,..thank you (NB:i dont want to use Get all Matched V.I because it obliges me to use a loop in order to access the name derrick and this increases the time duration for my v.i)
Solved!
Go to Solution.Since it's all text, why not use a real quick Match Pattern (or Regular Expression, but you don't need that much power here), see attached.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ
Attachments:
Two-stage match demo.vi 8 KB -
Searching for KB's directly with a URL containing the TID.
I have an application that gives me the TID of a support bulletin. I'd like a way to get a link directly to the bulletin on Novell's site.
For instance I see a Bulletin for apache2 for SLES 11 SP1 and it covers:
CVE-2011-3192,CVE-2011-3348,CVE-2011-3368
I'd like a way to search automatically by TID in a URL. My provider does not always provide the support ID for the bulletin, but the TID is always there.
I do notice if I goto:
NOVELL: Support
and search for the TID I get hits for the bulletin I'm looking for. Is there a way for me to use the URL itself with my search criteria in it?
So I could add something like:
274b1ea87316767c995b46d30d848997
To the URL in some particular string format?
Other search criteria may help as well if you cannot with the TID. I typically have a CVE, or bugzilla number too. The TID seems to be the most consistent though.
Thanks in advance for your time.
KSomething like this: http://www.novell.com/support/search...String=7920481
Is that what you're looking for? The actual URL to the TID directly is very long and complicated so the shortened search string above is generally used. -
Hi All,
We are planning to maintain the contents in SQL / Oracle. Could you please suggest anyone which is best for SharePoint 2010 / 2013 Search. How to configure the search for external content source?
Thanks & Regards,
PrakashThis link explains supported and non supported scenarios to use Oracle for BCS
http://social.technet.microsoft.com/Forums/sharepoint/en-US/453a3a05-bc50-45d0-8be8-cbb4e7fe7027/oracle-db-as-external-content-type-in-sharepoint-2013
And here is more on it
http://msdn.microsoft.com/en-us/library/ff464424%28office.14%29.aspx
And here how you can connect Oracle to SharePoint for BCS functionality
http://lightningtools.com/bcs/business-connectivity-services-in-sharepoint-2013-and-oracle-using-meta-man/
Overall it seems SQL doenn't require any special arrangement to connect BCS to SharePoint.
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
Search for checked out content
Hello,
I use UCM 10g with SiteStudio. I would like to create a QueryText that searches for all the checked out content. I checked in the database and found that dIsCheckedOut is the variable that is keeping this information.
The following code gves me no search results, also some content is checked out. Did someone try this before? What am I doing wrong?
QueryText = "(dIsCheckedOut <substring> `1`)"
SS_GET_SEARCH_RESULTSThanks
TobiasNo you are quite right to point out it is the quickest way to do this - not knocking you, it works and I have certainly done it myself BUT it was on a static (published by SSPU) site so performance was less of an issue.
Thats the problem with Site Studio I think it is very easy to have a whole bunch of service calls going on.
I guess other options to explore would be the use of a meta field to hold this information and use a filter to toggle the value on/off. Pretty useless but would mean that the value got promoted into the search results. Or modify the search query so that discheckout is pulled back by SS_GET_SEARCH_RESULTS.
Tim -
Enable the search for a site made with director
How can I index for google a site made with Director? (dcr File).
Thanks.In my opinion two or three keywords might suffice: your name and s.th. like "biography" or "portfolio" (if you want that the whole world can find your biography with your name) not your actual biographical data itself.
Don´t know how many browsers can set text to transparent meanwihle. "Hidden" is also hidden for search engines.
An example for dcr containing html with and without button and with a minimum of text: http://titanpad.com/QnWsz5nZtk
The most simple way to publish a portfolio is to write an e-mail "yourname"@posterous.com with the dcr-file attached!!! - and you own a blog named "www.posterous.com/yourname" in no time - for free.
example: http://ardigi.posterous.com/designaspekte (german only)
For a portfolio (of a professional in the digital domain) it is better to consider jchunks hints and use state of the art tools.
I myself consider free web 2.0 tools as always state of the art in the ever changing tool-world, and feel free to use programms I like to work with.....
Thank you too for your question, because I´ve clearified s.th. for my own now. -
Searching for Flash Photo Gallery with numbered navigation menu.
I'm looking for a photo gallery with a numbered navigation
menu. I've seen this gallery on several flash web pages. Is this
type of photo gallery a template that comes with flash? Has anyone
come across a tutorial for a photo gallery similar to the link
below.
http://www.rockcreeksm.com/index.php/work/portfolio/i made this one:
http://www.goldbergphotography.com/
but there are quite a few simpler photogalleries. use google
to search for some tutorials or templates. -
How to search for the selected text with a non-default search engine?
Hi,
Before the recent update of the search bar, you could select your "current" search engine, and a search for the selected text (right-click on selection) would use that engine.
Now, it seems that you can only search for the selected text using the default engine. If that's correct, this is a major step backwards for me. For instance, I can't have Google as my default search engine, and search for a selected text on eBay!
Or am I missing something?
Thanks!
R.I find this extension very useful for items selected on web pages. It offers all your search engines with select>right click.
https://addons.mozilla.org/en-US/firefox/addon/context-search/?src=search -
How do I search for just a folder with Spotlight
How do I search for a folder with Spotlight, not a file? Spotlight is a great tool for finding a file, but often I just want to locat a folder.
When I find a file, how to I see the path to this file?
These are probably obvious question for longtime Mac users, but I come from the Windows world.Activate the Finder's window. Put the folder name in the search field in the Finder's toolbar. Enter COMMAND-F which should change the Finder's window and give a toolbar above the column headers:
If you click on the dropdown menu with "Any" you will see this:
Select the "Folder" entry. -
Searching for and deleting songs with explicit lyrics
Hello. Over the years my song library has grown a bunch, but my music preferences have changed. I no longer wish to suddenly hear a song throwing the F-bomb around. Since I listen on my iPhone and cannot delete the song immediately, I need to know if there is a way to search for songs in iTunes for explicit lyrics so that I can delete them from my library. Is there a way?
Thanks for the help!!!!Thre is not a way to do it directly that I am aware of but you can go down your song list and just look for the red explicit label and delete it that way.
-
Searching for simple bluetooth to bluetooth messages tutorial or example
Hi,
I want to send messages from 1 mobile phone to another one using Bluetooth but I can't find any simple tutorial or example with this type of bluetooth use.
So i'm asking for your help :) any simple tutorial/example for bluetooth messages between devices?
Thanks in advanceimport java.util.Vector;
import java.io.IOException;
import javax.microedition.io.Connector;
import javax.microedition.io.ConnectionNotFoundException;
import javax.microedition.midlet.MIDlet;
import javax.microedition.midlet.MIDletStateChangeException;
import javax.microedition.lcdui.Display;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Form;
import javax.microedition.lcdui.TextField;
import javax.microedition.lcdui.StringItem;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.ChoiceGroup;
import javax.microedition.lcdui.Choice;
import javax.bluetooth.LocalDevice;
import javax.bluetooth.RemoteDevice;
import javax.bluetooth.DiscoveryAgent;
import javax.bluetooth.DataElement;
import javax.bluetooth.DeviceClass;
import javax.bluetooth.UUID;
import javax.bluetooth.DiscoveryListener;
import javax.bluetooth.ServiceRecord;
import javax.bluetooth.L2CAPConnectionNotifier;
import javax.bluetooth.L2CAPConnection;
import javax.bluetooth.BluetoothStateException;
import javax.bluetooth.BluetoothConnectionException;
import javax.bluetooth.ServiceRegistrationException;
public class ChatController extends MIDlet implements CommandListener
private Display display = null;
private Form mainForm = null;
private ChoiceGroup devices = null;
private TextField inTxt = null;
private TextField outTxt = null;
private Command exit = null;
private Command start = null;
private Command connect = null;
private Command send = null;
private Command select = null;
private StringItem status = null;
private LocalDevice local = null;
private RemoteDevice rDevices[];
private ServiceRecord service = null;
private DiscoveryAgent agent = null;
private L2CAPConnectionNotifier notifier;
private L2CAPConnection connection = null;
private static final String UUID_STRING = "112233445566778899AABBCCDDEEFF";
private boolean running = false;
public ChatController()
super();
display = Display.getDisplay(this);
mainForm = new Form("CHAT");
devices = new ChoiceGroup(null,Choice.EXCLUSIVE);
inTxt = new TextField("incoming msg:","",256,TextField.ANY);
outTxt = new TextField("outgoing msg:","",256,TextField.ANY);
exit = new Command("EXIT",Command.EXIT,1);
start = new Command("START",Command.SCREEN,2);
connect = new Command("CONNECT",Command.SCREEN,2);
send = new Command("SEND",Command.SCREEN,2);
select = new Command("SELECT",Command.SCREEN,2);
status = new StringItem("status : ",null);
mainForm.append(status);
mainForm.addCommand(exit);
mainForm.setCommandListener(this);
protected void startApp() throws MIDletStateChangeException
running = true;
mainForm.addCommand(start);
mainForm.addCommand(connect);
display.setCurrent(mainForm);
try
local = LocalDevice.getLocalDevice();
agent = local.getDiscoveryAgent();
catch(BluetoothStateException bse)
status.setText("BluetoothStateException unable to start:"+bse.getMessage());
try
Thread.sleep(1000);
catch(InterruptedException ie)
notifyDestroyed();
protected void pauseApp()
running = false;
releaseResources();
protected void destroyApp(boolean uncond) throws MIDletStateChangeException
running = false;
releaseResources();
public void commandAction(Command cmd,Displayable disp)
if(cmd==exit)
running = false;
releaseResources();
notifyDestroyed();
else if(cmd==start)
new Thread()
public void run()
startServer();
}.start();
else if(cmd==connect)
status.setText("searching for devices...");
mainForm.removeCommand(connect);
mainForm.removeCommand(start);
mainForm.append(devices);
DeviceDiscoverer discoverer = new DeviceDiscoverer(ChatController.this);
try
agent.startInquiry(DiscoveryAgent.GIAC,discoverer);
catch(IllegalArgumentException iae)
status.setText("BluetoothStateException :"+iae.getMessage());
catch(NullPointerException npe)
status.setText("BluetoothStateException :"+npe.getMessage());
catch(BluetoothStateException bse1)
status.setText("BluetoothStateException :"+bse1.getMessage());
else if(cmd==select)
status.setText("searching devices for service...");
int index = devices.getSelectedIndex();
mainForm.delete(mainForm.size()-1);//deletes choiceGroup
mainForm.removeCommand(select);
ServiceDiscoverer serviceDListener = new ServiceDiscoverer(ChatController.this);
int attrSet[] = {0x0100}; //returns service name attribute
UUID[] uuidSet = {new UUID(UUID_STRING,false)};
try
agent.searchServices(attrSet,uuidSet,rDevices[index],serviceDListener);
catch(IllegalArgumentException iae1)
status.setText("BluetoothStateException :"+iae1.getMessage());
catch(NullPointerException npe1)
status.setText("BluetoothStateException :"+npe1.getMessage());
catch(BluetoothStateException bse11)
status.setText("BluetoothStateException :"+bse11.getMessage());
else if(cmd==send)
new Thread()
public void run()
sendMessage();
}.start();
//this method is called from DeviceDiscoverer when device inquiry finishes
public void deviceInquiryFinished(RemoteDevice[] rDevices,String message)
this.rDevices = rDevices;
String deviceNames[] = new String[rDevices.length];
for(int k=0;k<rDevices.length;k++)
try
deviceNames[k] = rDevices[k].getFriendlyName(false);
catch(IOException ioe)
status.setText("IOException :"+ioe.getMessage());
for(int l=0;l<deviceNames.length;l++)
devices.append(deviceNames[l],null);
mainForm.addCommand(select);
status.setText(message);
//called by ServiceDiscoverer when service search gets completed
public void serviceSearchFinished(ServiceRecord service,String message)
String url = "";
this.service = service;
status.setText(message);
try
url = service.getConnectionURL(ServiceRecord.NOAUTHENTICATE_NOENCRYPT,false);
catch (IllegalArgumentException iae1)
try
connection = (L2CAPConnection)Connector.open(url);
status.setText("connected...");
new Thread()
public void run()
startReciever();
}.start();
catch(IOException ioe1)
status.setText("IOException :"+ioe1.getMessage());
// this method starts L2CAPConnection chat server from server mode
public void startServer()
status.setText("server starting...");
mainForm.removeCommand(connect);
mainForm.removeCommand(start);
try
local.setDiscoverable(DiscoveryAgent.GIAC);
notifier = (L2CAPConnectionNotifier)Connector.open("btl2cap://localhost:"+UUID_STRING+";name=L2CAPChat");
ServiceRecord record = local.getRecord(notifier);
String conURL = record.getConnectionURL(ServiceRecord.NOAUTHENTICATE_NOENCRYPT,false);
status.setText("server running...");
connection = notifier.acceptAndOpen();
new Thread()
public void run()
startReciever();
}.start();
catch(IOException ioe3)
status.setText("IOException :"+ioe3.getMessage());
//starts a message reciever listening for incomming message
public void startReciever()
mainForm.addCommand(send);
mainForm.append(inTxt);
mainForm.append(outTxt);
while(running)
try
if(connection.ready())
int receiveMTU = connection.getReceiveMTU();
byte[] data = new byte[receiveMTU];
int length = connection.receive(data);
String message = new String(data,0,length);
inTxt.setString(message);
catch(IOException ioe4)
status.setText("IOException :"+ioe4.getMessage());
//sends a message over L2CAP
public void sendMessage()
try
String message = outTxt.getString();
byte[] data = message.getBytes();
int transmitMTU = connection.getTransmitMTU();
if(data.length <= transmitMTU)
connection.send(data);
else
status.setText("message ....");
catch (IOException ioe5)
status.setText("IOException :"+ioe5.getMessage());
//closes L2CAP connection
public void releaseResources()
try
if(connection != null)
connection.close();
if(notifier != null)
notifier.close();
catch(IOException ioe6)
status.setText("IOException :"+ioe6.getMessage());
import java.util.Vector;
import javax.bluetooth.RemoteDevice;
import javax.bluetooth.DeviceClass;
import javax.bluetooth.DiscoveryListener;
import javax.bluetooth.ServiceRecord;
public class DeviceDiscoverer implements DiscoveryListener
private ChatController controller = null;
private Vector devices = null;
private RemoteDevice[] rDevices = null;
public DeviceDiscoverer(ChatController controller)
super();
this.controller = controller;
devices = new Vector();
public void deviceDiscovered(RemoteDevice remote,DeviceClass dClass)
devices.addElement(remote);
public void inquiryCompleted(int descType)
String message = "";
switch(descType)
case DiscoveryListener.INQUIRY_COMPLETED:
message = "INQUIRY_COMPLETED";
break;
case DiscoveryListener.INQUIRY_TERMINATED:
message = "INQUIRY_TERMINATED";
break;
case DiscoveryListener.INQUIRY_ERROR:
message = "INQUIRY_ERROR";
break;
rDevices = new RemoteDevice[devices.size()];
for(int i=0;i<devices.size();i++)
rDevices[i] = (RemoteDevice)devices.elementAt(i);
controller.deviceInquiryFinished(rDevices,message);//call of a method from ChatController class
devices.removeAllElements();
controller = null;
devices = null;
public void servicesDiscovered(int transId,ServiceRecord[] services)
public void serviceSearchCompleted(int transId,int respCode)
import javax.bluetooth.RemoteDevice;
import javax.bluetooth.DataElement;
import javax.bluetooth.DeviceClass;
import javax.bluetooth.DiscoveryListener;
import javax.bluetooth.ServiceRecord;
public class ServiceDiscoverer implements DiscoveryListener
private static final String SERVICE_NAME = "L2CAPChat";
private ChatController controller = null;
private ServiceRecord service = null;
public ServiceDiscoverer(ChatController controller)
super();
this.controller = controller;
public void deviceDiscovered(RemoteDevice remote,DeviceClass dClass)
public void inquiryCompleted(int descType)
public void servicesDiscovered(int transId,ServiceRecord[] services)
for(int j=0;j<services.length;j++)
DataElement dataElementName = services[j].getAttributeValue(0x0100);
String serviceName = (String)dataElementName.getValue();
if(serviceName.equals(SERVICE_NAME))
service = services[j];
break;
public void serviceSearchCompleted(int transId,int respCode)
String message = "";
switch(respCode)
case DiscoveryListener.SERVICE_SEARCH_COMPLETED:
message = "SERVICE_SEARCH_COMPLETED";
break;
case DiscoveryListener.SERVICE_SEARCH_ERROR:
message = "SERVICE_SEARCH_ERROR";
break;
case DiscoveryListener.SERVICE_SEARCH_TERMINATED:
message = "SERVICE_SEARCH_TERMINATED";
break;
case DiscoveryListener.SERVICE_SEARCH_NO_RECORDS:
message = "SERVICE_SEARCH_NO_RECORDS";
break;
case DiscoveryListener.SERVICE_SEARCH_DEVICE_NOT_REACHABLE:
message = "SERVICE_SEARCH_DEVICE_NOT_REACHABLE";
break;
controller.serviceSearchFinished(service,message);//calling a method from ChatController class
controller = null;
service = null;
} -
Best Practices for Creating eLearning Content With Adobe
As agencies are faced with limited resources and travel restrictions, initiatives for eLearning are becoming more popular. Come join us as we discuss best practices and tips for groups new to eLearning content creation, and the best ways to avoid complications as you grow your eLearning library.
In this webinar, we will take on common challenges that we have seen in eLearning deployments, and provide simple methods to avoid and overcome them. With a little training and some practice, even beginners can create engaging and effective eLearning content using Adobe Captivate and Adobe Presenter. You can even deploy content to your learners with a few clicks using the Adobe Connect Training Platform!
Sign up today to learn how to:
-Deliver self-paced training content that won't conflict with operational demands and unpredictable schedules
-Create engaging and effective training material optimized for knowledge retention
-Build curriculum featuring rich content such as quizzes, videos, and interactivity
-Track program certifications required by Federal and State mandates
Come join us Wednesday May 23rd at 2P ET (11A PT): http://events.carahsoft.com/event-detail/1506/realeyes/
Jorma_at_RealEyes
RealEyes ConnectYou can make it happen by creating a private connection for 40 users by capi script and when creating portlet select 2nd option in Users Logged in section. In this the portlet uses there own private connection every time user logs in.
So that it won't ask for password.
Another thing is there is an option of entering password or not in ASC in discoverer section, if your version 10.1.2.2. Let me know if you need more information
thnaks
kiran -
Using Multiple External HDs for your iTunes content with one Library
Hello everyone so I have used this little trick a lot in the last few months and I thought I would share it.
I am using two 250 GB external HDs for all my iTunes files. Plus the Music on my internal HD
In order to have iTunes manage my content and store it in separate locations i.e. some on the internal HD in my MacBook and some on the external HDs at home. I had to convince iTunes that it really was all in one spot. How do you do this you ask well it is simple. Symbolic Links.
Linux has a great feature that allows you to link any two directories. Since Linux is the core of OS X a simple drag and drop of files and one Terminal command and you are on your way to separate locations for all your files and iTunes thinking it is all in the "iTunes Music" folder.
The command is as follows
ls -s "the directory where the files are" ./
this command must be run in terminal from the original location of the files after you have moved them to the trash. DO NOT EMPTY THE TRASH until you have verified that the link works or your files are safe on the external.
Below is the system that I use.
The original location of my TV Shows is my external HD labeled "iTunes Media"
The New location for my TV Shows is my second external HD labeled "iTunes TV Shows"
1. Drag and Drop the folders to the new location.
2. Move the files from the original location to the Trash.
In the Terminal window
3. cd /Volumes/iTunes\ Media/TV\ Shows/ (this is the original location for my TV Show directories)
4. ln -s /Volumes/iTunes\ TV\ Shows/"name of the show" ./
5. in iTunes I play one of the files just to make sure the link worked. It is really just a test on the first one I do not do this often but you should test a few just to make sure.
If someone needs help please email me. [email protected]
If this in not clear enough let me know and I will try and explain it better.No answer needed Just information for the masses.
-
I am currently receiving hundreds of pdf attachments daily basis and am storing these pdf files in a file system. I am looking for a solution that will allow me to use full text search on these these files. Can someone help me out.
Thanks
SamI am talking about server level full text search not an individual search on a file. For exmple, if you have 1000 pdf files and you want to find out what file or files contain the word "shopping". Is there a adobe plug in that I need to buy? Do I need to store these files in a database rather than in file system?
Maybe you are looking for
-
Hi There, I have a website running on : Windows 2003, IIS 6.0, ColdFusion MX 7 and Contribute 3.0 with Contribute Publishing Services 1.1 These are the services running on the Server IIS 6.0 Server ColdFusion MX 7 Application Server - ColdFusion MX 7
-
New event in iCal posts before completing event name
I am about to implode...While I am entering the title of a new event, iCal will either delete midstream (while typing), or automatically bring up the edit screen while typing. This began after an upgrade was installed. Also, when trying to move the e
-
How to send music from a ipodtouch to another with the bluetooth??
how to send music from a ipodtouch to another with the bluetooth??
-
TS3274 my ipad will not come on or accept my passcode at all
Question. My Ipad is brand new. Got it set up with email account. Downloaded Google Earth. After a couple of hrs. Ipad is frozen. Tried doing a restart by holding the Top Button and bottom on off at the same time as instructions but it still won
-
Imovie 3 crops imported still photos
I'm trying to make a slide show of still images. Imovie 3 crops my imported photos (NOT from iphoto) to fit screen, instead of shrinking photos to fit. How to correct? Thanks.