In setting up ICloud on my new Iphone 4s, I lost most of my calendar events in my Outlook 7 calendar. I used to have MobileMe but in the set-up process was told to turn that off which I did but now most of my calendar events have disappeared
In setting up ICloud on my new Iphone 4s, I lost most of my calendar events in my Outlook 7 calendar in my Vista PC. I used to have MobileMe but in the set-up process was told to turn that off, which I did but now most of my calendar events have disappeared after syncing with ICloud. How can I get my missing calendar events back? They are still on my 3Gs Iphone which I have not yet updated to IOS5.
Thanks for any help.
marybpod
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.
Similar Messages
-
I have two phones that share an itunes acct and a notice came up this morning and I hit yes. Now I get a text everytime I send a text to the other phone. How do I turn that off?
search google for "iphone remove picture from contact"
-
My iPad will stay on for minute or so, then will restart. I have tried to restore, but it says I must have "Find My iPad" turned off. The iPad will not allow me to turn that off, so I am at quite the impasse. Any help?
Answer to this question: https://discussions.apple.com/message/22350503#22350503
-
I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!
If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
Open Office is free, you can download it here:
Open Office for Mac -
I am trying to obtain a job doing customer svcs and data entry from home in order to do this my computer system has to meet their demands . I have received the following errors to disable my pop-up blockers which I did but I am still getting the errors . What else might I do . This is the link to one of the sites https://portal.arise.com/SES/Content/ASPX/Admissions.aspx Please help
MacBook Pro forum and support:
http://www.apple.com/support/macbookpro
there isn't a lot you can do - some - with laptops that overheat or run too hot other than get it serviced. -
! started to update my system and was told to restart. I did. it has now been about 6 hours and all i see is an apple and a rotating circle. what is happening?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
My phone is on silent but my camera still makes sound how do I turn that off ?
I have an iPhone 6 and i turned all my phone onto silent and there's no sound what so ever but once I take a picture it makes sound how do i turn it off it won't stop every time I take a picture !
Hello Taniaaychan,
If your iPhone is muted using the Ring/Silent switch on the side of your iPhone and you're still hearing the shutter sound, this function may be disabled.
Adjust the volume of the shutter sound with the Ringer and Alerts settings in Settings > Sounds. Or mute the sound using the Ring/Silent switch. (In some countries, muting is disabled.)
iPhone User Guide - Camera settings
http://help.apple.com/iphone/8/
Cheers,
Allen -
When I click on Affects, then Synthetic Aperture, then SA Color Finesse 3 in the Creative Cloud a grid appears over the video in the display window, and I am un sure how to take that off?
Color Finesse 3 LE is included with After Effects and is installed automatically when After Effects is installed. The only reason to upgrade to the paid version is if you want to use Color Finesse in Premiere Pro as well as in After Effects.
Since it's a college computer, do you have the ability to install/uninstall software? Many colleges lock down the computers to limit such access. You'll need full access, including an admin password, to use the following steps. If you're not allowed the necessary access, you can pass the following along to whoever does computer administration.
To remove the trial version, delete the entire "Synthetic Aperture" folder found in:
/Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore
(Note that this is the Library folder at the base of your boot drive, not the one in your home folder.)
Next, re-enable the bundled version of Color Finesse by going to the following folder:
/Applications/Adobe/Adobe After Effects CC/Support Files/Plug-ins/Effects/Synthetic Aperture
Now, within that "Synthetic Aperture" folder you'll find a plug-in with parentheses around the name:
(SA Color Finesse 3 AE64)
Remove the parentheses from the filename so AE will see it. Do NOT remove the parentheses from the "(CF3 Support)" folder or AE will launch very, very slowly, and Color Finesse won't work right.
Finally, within the "(CF3 Support)" folder, locate the "(SA Color Finesse 3 UI)" application and remove the parentheses.
Launch AE, apply Color Finesse to a layer, enter a name, and you should be good to go with no grid lines.
Bob Currier
Synthetic Aperture -
The new Foxfire version was downloaded into my download folder but I was never prompted, as it said I would be , so move the Foxfire icon into the applications folder. Therefore I do not know where the process stands. It old icon in my dock upgraded or has nothing happeded. It seems as if the process somehow just stopped in the middle.
Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
JJust was wondering if the store assoc. lied to get the sale quoted in
Where and how did you purchase the Galaxy S5? Did you have the unlimited data plan before making the purchase?
-
I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?
You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??
-
How do you set up to back up iPad notes in iCloud? I turned on backing up notes in iCloud settings, and it asked me to create a .me account, which I did, but I don't see my notes anywhere on iCloud, and I never received a password for my .me account.
You'll find your notes under Mail in iCloud. There's a separate folder on the left that's labeled notes so you can access them anywhere. And your me.com account will have the same password as your Apple ID (in fact, you can log into iCloud with just your Apple ID, as the two accounts are permanently linked).
-
hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advanceSharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?
I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time! -
Just bought an iPhone 5. Although I did not set up a voicemail password, it keeps asking for one. How do I turn that off?
I believe once you set and input the password on your iPhone it will NEVER ask you for it again, unless you restore your phone as a new device.
So, set a password, input it, then you shouldn't see that popup anymore.
Maybe you are looking for
-
I have a gigabyte ethernet network connecting my home and workshop. I have an iMac (mid-2009 and late-2012) at each location running Mountain Lion and Windows 7 Home Premium under Parallels 8. I want to be able to access my Quicken (for Windows), O
-
I had some problems with an email account in Mail.app so i deleted the account. When i wan't to add a new account and give it the same name the account i deleted had it gives me the message; Error You already have an account named: "xxx". I tried del
-
Security check in "HTML Expression" property?
Hi, question for the gurus, because it's not logical for me how APEX behaves. I have the following report query: SELECT EMPLOYEE_ID , LAST_NAME , EMAIL , Apex_Item.Text(1, PHONE_NUMBER) AS PHONE_NUMBER_INPUT , PHONE_NUMBER ,
-
I change between screens a lot when using Illustrator. If I am in the middle of making a path and then try to come back to it the last anchor point only has one handle. Then I have to go and convert it but that repeats the entire process. For example
-
JFC Swing Focus Issue : Help Needed :Urgent
�In my application,Swing (JFC,jdk 1.6) calls C++ executables ,at times executable pop up comes before the main swing window (C++ is faster than swing window to come), as java window comes second it steals focus from C++ dialog , but our intention is