In Sharepoint 2013 Workflows, can a task be re-assigned?

I find that in SharePoint 2013 SP Designer based workflows, I can not find the settings to make the workflow tasks re-assignable.
This was possible in 2010, I can't find how or where to check off 're-assign task'.
Thanks, Roy Kim

Hi,
In SharePoint 2013 there two platform workflows, SharePoint 2010 workflow and SharePoint 2013 workflow. Which kind of workflow
do you want to create? If it’s 2010 based workflow, then to reassign task form is used the same method. If it’s 2013, then there only two task actions, assign a task and start a task process, these two actions can’t set to reassign the task form.
Best Regards.
Kelly Chen
TechNet Community Support

Similar Messages

SharePoint 2013 workflow can not be completed

I use Visual studio 2013 to create an sharepoint 2013 workflow and just insert a single task into it. I fill the assignto property directly and the account does recieve the mail. Then I approve the created task but the workflow is still there and it can't
be completed after that. I have spend several days just try to make the workflow completed but I can't. Any clues?

Hi Kevin,
As I know, there's two properties for task - one is Status with values 'In Progress', 'Completed' etc. Another property is 'Task outcome' with values 'approved' and 'rejected'. Task created by SignleTask, wait for task completion which means status field
should have value 'Completed' and then workflow will consider the task as complete. In your case I'm not sure if you have set the task status as completed or not. If you set the task status to completed only then workflow will consider the task as completed.
However, in your case you can set the property 'WaitForTaskCompletion' to false and just after SignleTask you can use other activity like - wait for item event or wait for field change, to find out if the task out field is 'approved' or 'rejected'. You can
put the activity in a loop and in the loop you can wait till due date or until the task-outcome is approved/rejected.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

SharePoint 2013 Workflow Custom Task Form

Hi..I am working on SharePoint 2013 workflow using visual studio 2013. In this workflow, i am creating tasks and i want to make a custom task form.
My workflow contains serial tasks. When each user approve, he should specify the next user.
I have added a custom content type and assigned it to my tasks but all i can do is taking the outcome from the task form as integers.
I want the user to approve and choose another user so i can assign another task to him.
thanks..

I believe what you're looking for is the Collect Data from User function, however I don't see that anywhere in a 2013 workflow. This did exist in 2010 workflows.
What you can do is to change this to an InfoPath form and run the workflow that way, assuming there isn't anything you absolutely need Visual Studio for.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

SharePoint 2013 workflow task gets canceled

Just wanted to share my solution to a problem that I was having when creating a SharePoint 2013 Workflow that includes creating a task and assigning it to a group of people. After publishing the workflow and initiating it you get:
Retrying last request. Next attempt scheduled in less than one minute.
Microsoft.SharePoint.Client.ResourceNotFoundException: Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals
An unhandled exception occurred during the execution of the workflow instance.
  Exception details: System.ApplicationException: HTTP 404 {"error":{"code":"-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
  "message":{"lang":"en-US","value":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals."},
  "innererror":{"message":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals.",
  "type":"Microsoft.SharePoint.Client.ResourceNotFoundException","stacktrace":" at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathRoot(Boolean mainRequestPath, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestService.ProcessQuery(Stream inputStream, IList`1 pendingDisposableContainer)"}}
  } {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["46"]
  ,"SPRequestGuid":["624f66f8-a70c-81db-bf0d-c042443f5435"],"request-id":["624f66f8-a70c-81db-bf0d-c042443f5435"],
  "X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],
  "X-MS-InvokeApp":["1; RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 06 Apr 2015 22:17:23 GMT"],
  "Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at
  Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at
   System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
   System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I was not able to find any answer anywhere, so my solution was:
1. Simply upgrade SharePoint Server 2013 to the latest version which in turn updates Microsoft.Activities.Proxy.dll
2. Clear the SharePoint Designer cache
  Workflow Error - Sharepoint Designer cannot display the item
  http://community.office365.com/en-us/f/154/t/74327.aspx
I hope this is helpful to somebody
Thanks

Hi Amit,
According to your description, my understanding is that you want to approve workflow task using web service in SharePoint 2013.
For troubleshooting this issue, please provide the more detailed code.
Here are some similar posts, please check if they are useful:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/b999a417-dce3-4590-9173-89aea91f23a3/complete-workflow-after-approving-all-tasks?forum=sharepointdevelopment
http://www.sharepointblog.in/2013/07/programmatically-approvereject-task-in.html
http://aarebrot.net/blog/2011/10/how-sloppiness-and-spworkflowtask-altertask-could-inadvertantly-lock-your-workflow-task/
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Any way i can create and manage SharePoint 2013 workflows in browser.

Guys,
is there any way i can created and manager sharepoint 2013 workflows in browser like Nintex lets you do. This will eliminate the need for sharepoint designer.
thanks
MM

No. SharePoint's work flows are created from SharePoint Designer or Visual Studio. Third party solutions like Nintex have other approaches.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Can SharePoint Apps and SharePoint 2013 workflow run on the same servers?

As the SharePoint 2013 workflow manager can run on non-sharePoint servers. Can I also use those server to host SharePoint apps in the Provider host model?
Or should I keep them separate?
This is a medium size deployment, 2 WFEs, 2 Apps, 1 Clustered DB. I would be adding 2 additional servers for hosting workflow manager, and SharePoint apps.
One other option I can think of would be to host the Workflow manager on the SharePoint Apps servers. And then host the SharePoint Apps on the 2 separate servers.
Any guidance or gatchas would be great the hear about.
Thanks!
Joshua Fuente

Yes, you should be able to run SharePoint Provider hosted apps using the Workflow Server as the provider. There is nothing in workflow manager that prevents running web sites on the same server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Problem refering to a custom activity in a SharePoint 2013 workflow

I have created a few custom activities to handle common tasks in a workflow. The activities are deployed in a separate sandbox solution from the workflows referencing them.
This has been working fine for a couple of months now, but suddenly I get an error when trying to activate the feature that provisions the workflow that refers to the custom activity (WriteMessage). The error is:
Error 1
Error occurred in deployment step 'Activate Features': Microsoft.Workflow.Client.ActivityValidationException: Workflow XAML failed validation due to the following errors:
Cannot create unknown type '{wf://workflow.windows.net/default/f0b36ec0-d40f-4df8-a99b-39f6dc4854a8/09e1bc2d-1cc8-4cff-ae22-32a52f54b685/$Activities}WriteMessage'. HTTP headers received from the server - ActivityId: ac291077-6536-4c63-b7b0-7701b6d29268. NodeId:
DKRDSSP15DEV03. Scope: /SharePoint/default/f0b36ec0-d40f-4df8-a99b-39f6dc4854a8/09e1bc2d-1cc8-4cff-ae22-32a52f54b685. Client ActivityId : e9d2bfd0-bb0e-4c28-bf55-8748368feb5b. ---> System.Net.WebException: The remote server returned an error: (400) Bad
Request.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
--- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.ActivityManager.Publish(ActivityDescription description, Boolean overwriteXClassName, Boolean terminateDependentInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishActivity(String serviceGroupName, ActivityDescription activity, Boolean overwriteXClass, Nullable`1 terminateInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.PublishActivity(FabricWorkflowManagementClient client, ActivityDescription activityDefinition, String serviceGroupName)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.<>c__DisplayClass5.<PublishDefinition>b__4()
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.InvokeWithEcosystemRetry(WorkflowServicesContext context, EcosystemRequiredMethod method)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.PublishDefinition(WorkflowDefinition workflowDefinition)
at Microsoft.SharePoint.WorkflowServices.WorkflowDefinitionStorageEventReceiver.PublishDefinition(SPItemEventProperties properties)
0 0
Vestas.SP.CMS.AlarmReports
I have tried creating a simple workflow using the custom activity, by referencing the sandbox solution. This works fine, if I create the simple workflow in a new project and deploys it and activate the workflow feature. However, if I create a similar simple
workflow in the original solution and omit the original workflows. Then I still get the above error when deploying / activating the workflow feature.
How do I clean up my original project so it does not give me this error when deploying and activating the workflow feature?
best regards
Lars Kohsel
Best regards Lars Kohsel

Hi,
As the error still occur when you create a simple workflow in the original project, maybe some configurations have been changed in the project.
You can check with the new created project whether there are some difference configurations in the project.
There is a similar article for your reference.
http://blogs.msdn.com/b/cliffgreen/archive/2013/03/11/sharepoint-2013-workflow-deployment-errors.aspx
What’s more, you can also copy your original project code to the new project, then check whether it works.
If it works, the we can use the new project instead of the original project.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Sharepoint 2013 workflows and Due date

hi, i'm a sharepoint designer 2010 user, and i recently migrate to sharepoint 2013 (and use sharepoint designer 2013).
I understood it was impossible to migrate sharepoint 2010 workflow to sharepoint 2013 workflows ! But it was possible to call 2010 workflow from 2013 worikflow.
However, i thought i could reproduce workflow under SPD 2013. I recently discover that was not as possible as it seems
for example, it was possible to escalate a task after due date, under SP2010 workflow. I try to reproduce it under sharepoint 20103 workflow, but it seems not to be possible any more (i read this article >>
link <<!
Does any sharepoint's expert can confirm it to me !?
Mon blog : http://spinfopath2010.blogspot.fr/ Sharepoint online 2010 Sharepoint Designer 2010 - InfoPath 2010 - newbie level !

Also please note that you can combine both workflow engines together! It means you can create 2013 workflow using the new model and if you face any action which is no longer available (and you cannot find any other way, e.g. impersonation step) -
you are able to just easily invoke 2010 workflow with its set of actions.
To do so, please read following article, which also describes why some features are no longer available and how to implement these deprecated activities in 2013 environment:
http://msdn.microsoft.com/en-us/library/jj728659.aspx
Hi martin,
Yes, i know i can call a 2010 worklfow from a 2013 one, but it seems to me "tricky", and not a very good practice. Because, these workflows can be either deprecated or abandonned.
I prefered to use a "full" 20130 workflow instead of mixing it with an older version
Anyway, if there is no other way, i'll do it
Mon blog : http://spinfopath2010.blogspot.fr/ Sharepoint online 2010 Sharepoint Designer 2010 - InfoPath 2010 - newbie level !

Sharepoint 2013 Workflow InitForm.aspx Visual Studio 2013

Hi,
I have a small problem. In my initform.aspx for my SP 2013 workflow I have a people editor element so that users can select multiple users (reviewers). I successfully used jquery to get the login-names. I want to use these names for a composite task in my
workflow, and the task want a collection<string> in the AssignedTo-box. How do i store these logins in a collection<string> object? What datatype do I use for my workflow argument to store these logins from the javascript(wfParams) in my InitForm.aspx?
//Regards Kjell

Hi,
To develop SharePoint 2013 workflows using Visual Studio 2012, it requires to set up a workflow development environment first.
It is recommended to look through the two documentations from MSDN about
Prepare to set up and configure a SharePoint workflow development environment
before starting the workflow development:
http://msdn.microsoft.com/en-us/library/office/dn413607.aspx
http://msdn.microsoft.com/en-us/library/office/jj163917.aspx
Best regards
Patrick Liang
TechNet Community Support

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

SharePoint 2013 Workflow Lookup Column Error

When I try to use the value from a lookup column (e.g. display the selected value in the body of a email) in a SharePoint 2013 workflow I receive the following error. It works fine if I use the SharePoint 2010 workflow platform, but I always receive a error
with 2013.
First Error:
Retrying last request. Next attempt scheduled in less than one minute. Details of last request: HTTP NotFound to http://portal.test.com/sites/Test/_vti_bin/client.svc/web/lists/getbyid(guid'00000000-0000-0000-0000-000000000000')/Items(10)?%24select=ID%2CLookupId%2CLookup%2FTitle&%24expand=Lookup
Correlation Id: 3fb1bac9-f4b6-bbf1-a664-b3748668ea3c Instance Id: e7b4064d-029d-4a8b-9a75-7939f10e8817
<script type="text/javascript">// <![CDATA[ var errorMessage = "Something went wrong. To try again, reload the page and then resume
the workflow."; var dlg = null; function RetryWorkflow4(instanceName) { showDialog(); var ctx = SP.ClientContext.get_current(); var wfManager = SP.WorkflowServices.WorkflowServicesManager.newObject(ctx, ctx.get_web()); var instanceService = wfManager.getWorkflowInstanceService();
var instance = instanceService.getInstance(instanceName); instanceService.resumeWorkflow(instance); ctx.executeQueryAsync( function(sender, args) { closeDialog(); theForm.submit(); }, function (sender, args) { closeDialog(); alert(errorMessage); } ); } //
]]> </script>
Error from SharePoint Logs:
Microsoft.SharePoint.SPException: List does not exist. The page you selected contains a list that does not exist.
It may have been deleted by another user. ---> System.Runtime.InteropServices.COMException: List does not exist.
The page you selected contains a list that does not exist.
It may have been deleted by another user.     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt,
Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
    at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32
dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData,
Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.ItemByInternalName(String strInternalName, Boolean bThrowException)
at Microsoft.SharePoint.SPListCollection.GetListById(Guid uniqueID, Boolean bThrowException)
at Microsoft.SharePoint.SPListCollection.get_Item(Guid uniqueID)
at Microsoft.SharePoint.SPListCollection.GetList(Guid uniqueId, Boolean fetchMetadata)
at Microsoft.SharePoint.SPListCollection.GetById(Guid uniqueId)
at Microsoft.SharePoint.ServerStub.SPListCollectionServerStub.InvokeMethod(Object target, String methodName, ClientValueCollection xmlargs, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.ServerStub.InvokeMethodWithMonitoredScope(Object target, String methodName, ClientValueCollection args, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.InvokeMethod(Boolean mainRequestPath, Object value, ServerStub serverProxy, EdmParserNode node, Boolean resourceEndpoint, MethodInformation methodInfo, Boolean isExtensionMethod, Boolean isIndexerMethod)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathMember(Boolean mainRequestPath, String path, Object value, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()

Hi
XantosX5 ,
Thank you for your posting!
According to your description, I try to reproduce your scenario in my SharePoint Server 2013 environment.
I create a lookup column in a list and create a workflow 2013 for the list. In the workflow, I add Send an email action. Then I display the lookup column in the body of the email as the below figure:
When I start the workflow, it works fine.
Have you installed
the workflow manager 1.0 cumulative update 1 ? It can be the point. If not, please install it.
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Sharepoint 2010 Workflow successful: Sharepoint 2013 Workflow UNsuccessful:

Observation 1
1. I created 2 workflows that write "completed" to the workflow history
a. 1 workflow uses sp2010 workflow manager
b. 1 workflow uses sp2013 workflow manager
2. sp2010 workflow works fine; it will start either manually or automatically (when a new item is created ) without issue; "completed' is written to the log as expected. Good.
3. sp2013 does not start automatically (when a new item is created ); when trying to start manually I get error message "Something went wrong. To try again, reload the page and then start the workflow." Which I do, but still fails.
Bad.
4.On Workflows.aspx I can see the links to start the 2 workflows manually.
a. When I hover over the sp2010 workflow link I can see something that look like this:
http://playground/sites/falcontt/_layouts/15/IniWrkflIP.aspx?List={ae95de8e-508b-4aa6-b4b6-490288e35e9f}&ID=53&ItemGuid={697E4218-D889-4FB8-A27B-D188F5D93250}&TemplateID={199c3d86-89a8-4286-b285-37e2d2067b52}&Source=http%3A%2F%2Fplayground%2Fsites%2Ffalcontt%2FLists%2FTrouble%2520Tickets%2Fall%2520requests%2Easpx
b. But when I hover over the sp2013 workflow link I can see something that look like this:
javascript:StartWorkflow4('949cb889-9b46-4959-9673-842e60cc5a42', '53', '{697E4218-D889-4FB8-A27B-D188F5D93250}')
Should this link also look similar to the sp2010 workflow link? If so, do you have any idea why it is different?
Observation 2
In Sharepoint Designer 2013, when I goto Navigation -> Workflows and click on the 2010 workflow, I see a file listed under "Forms" that looks like this "sp2010 test workflow.xsn". By the way the name of the workflow happens
to be "sp2010 test workflow".
But when I goto Navigation -> Workflows and click on the 2013 workflow, I see a NO file listed under "Forms". Should I see "sp2013 test workflow.xsn" listed there? If yes, can you think of why it is not listed there?
I saved the workflow debug logs from Event Viewer but won't share that info here unless necessary, to avoid making things look more complicated than they have to be.
Thanks for any comments suggestions, tips, questions, anything, etc.
Thanks and have a great weekend.
George

Hi George,
First of all, I'd like to clarify that workflow manager is dedicated for SharePoint 2013 workflow platform. SharePoint 2010 workflow is integrated in SharePoint server, while 2013 workflow is based on a new platform named workflow manager server.
In SharePoint 2013 designer, 2010 workflow has forms while 2013 workflow doesn't have forms.
For this issue, I suspect there is something incorrect with workflow manager. From the error message "Something went wrong. To try again, reload the page and then start the workflow", please flush the DNS cache via executing
IPCONFIG /FLUSHDNS, and restart workflow manager related services such as below, then recreate 2013 workflow to test the issue:
Service Bus Gateway
Service Bus Message Broker
http://blog.houratious.com/2014/05/sharepoint-2013-workflow-something-went.html
Regards,
Rebecca Tu
TechNet Community Support

SharePoint 2013 Workflow Calendar Entry Create Time AM PM Conflict

Windows 2012, SharePoint 2013 Enterprise.
I have a change control form that basically creates a calendar entry once it's been approved. Works well, but discovered a bug with the calendar create portion when there are events that have the same time in AM\PM.
Use case:
1. Create a change control item in the list with a planned start time of 2PM, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM, all good.
2. Create another change control item in the list with a planned start time of 2AM this time, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM and not 2AM. ???
Yes the original event entry created in the list shows planned start time of 2AM, but its being created in the calendar entry as 2PM. This only happens when the time is exact. For example if I had created the second entry at 3PM, it will create the calendar
entry at 3PM. It only happens if there is an existing entry for the same time, then all subsequent entries for the same time will have the same AM\PM depending on the first entry.
I can manually create an entry in the calendar and specify 2PM and it will take, so its something with the workflow that is causing it. The workflow is very simple all its doing is checking the item to see if the field says approved for the change request
form if so, create calendar event and carry over the fields, planned start time, planned end time, title description, that's it.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Hi James,
In my test per your description, I cannot reproduce the issue, however, I attached the screenshot of my test for your reference, let me know if there is misunderstanding.
Please capture the screenshot of your workflow process design so I can try to reproduce or find out if there is action that may cause the issue.
In addition, could you please try to locate workflow error message? If there is obvious error information, please refer to the Activate Workflow Manager Logs part in the article below:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SharePoint 2013 Workflow (SPD 2013) fails for Active Directory Group members

Hi
I have a SharePoint 2013 site called "Team Meetings". There are a number of lists and an InfoPath form library.
The site's SharePoint Group "Team Meeting Members" has two Active Directory groups (All Club Managers and All Club Police) as members. Those two AD groups contain all the people that I want to have access to the library and list, except for
a few additional folk who I have made individual members.
My PROBLEM:
I have created a SharePoint 2013 Workflow using SPD 2013 associated with the Form Library. Workflow is set to start on new or modified item. The first action is to write to history list, then determine the status (Submitted or Pending) of
the form and go to different Stages depending on that status.
The workflow works perfectly for any user who has been added directly to the SharePoint group (Team Meetings Members) BUT FAILS at the very first action for anyone who is a member of one of the AD groups. I know the Workflow is fine because I've tested it
with numerous people who are direct members of the SharePoint Group, but whenever a person who is a member of the AD group tries it the Workflow just fails.
Here's a print of the info from the Workflow Status page (I don't have access to server logs):
RequestorId: 4494760f-92ff-2e8c-90d2-cc7df0e6baa4. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPRequestGuid":["4494760f-92ff-2e8c-90d2-cc7df0e6baa4"],"request-id":["4494760f-92ff-2e8c-90d2-cc7df0e6baa4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 10 Mar 2014 01:31:42 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
The HTTP response content could not be read. 'Error while copying content to a stream.'. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
Members of the SharePoint Group "Team Meetings Members" have Contribute Access to both the form library and another list that the workflow writes to as well as the Workflow History list (which in SP 2013 uses the credentials of the
user who started the workflow, unlike 2010 which used System Account).
All members of the Team Meetings Members group, whether they are individual members or part of one of the AD groups, have no problems opening and saving forms etc. It's just the Workflow that doesn't like them...
I am stumped. I've spent many hours searching for a reason for this. There are about 200 people in the two AD groups so I really don't want to have to add them all individually - especially when these groups are managed in AD for a whole bunch of other reasons
and using the AD groups means I'll basically never have to worry about modifying the SharePoint access permissions.
Does anyone have any ideas why this is happening and what I can try to fix it?
Mark

Hi Lars,
I'm afraid not so far but we are trying a few things today so I will post back with results.
First thing we are doing is making the AD Group universal because one of our (external provider) gurus remembers seeing something about that. He also sent me a link to a post where they were talking about earlier
versions but having similar issues and their solution was to make sure the app pool account has sufficient permissions in AD::
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/27a547da-5cc0-49d7-8056-6eb40b4c3242/failed-to-start-workflow-access-is-denied-exception-from-hresult-0x80070005-eaccessdenied
This part of that thread looks interesting but we haven't checked it yet as were trying the universal setting first:
"If the users participating in the workflows have been added to the SharePoint site via Active Directory groups, SharePoint has to update the user’s security token periodically by connecting to
the domain controller. By default, the token times out every 24 hours. But if the application pool account did not have the right permissions on the domain controller to update the user’s token, user will keep getting the access denied error. The error was
intermittent because when the user browsed to any page other than the workflow form, the token was getting updated successfully.
You can try to fix it through granting the application pool account the appropriate permission by adding the account to the group “Windows Authorization Access Group” in Active Directory."
I'll update when we try these ideas. If you have any luck please do the same.
Mark
(sorry about formatting - using my phone....)
Mark

SharePoint 2013 Workflow created on SharePoint Designer gets canceled

Just wanted to share my solution to a problem that I was having when creating a SharePoint 2013 Workflow that includes creating a task and assigning it to a group of people. After publishing the workflow and initiating it you get:
Retrying last request. Next attempt scheduled in less than one minute.
Microsoft.SharePoint.Client.ResourceNotFoundException: Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals
An unhandled exception occurred during the execution of the workflow instance.
   Exception details: System.ApplicationException: HTTP 404 {"error":{"code":"-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
   "message":{"lang":"en-US","value":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals."},
   "innererror":{"message":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals.",
   "type":"Microsoft.SharePoint.Client.ResourceNotFoundException","stacktrace":" at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathRoot(Boolean mainRequestPath, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestService.ProcessQuery(Stream inputStream, IList`1 pendingDisposableContainer)"}}
   } {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["46"]
   ,"SPRequestGuid":["624f66f8-a70c-81db-bf0d-c042443f5435"],"request-id":["624f66f8-a70c-81db-bf0d-c042443f5435"],
   "X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],
   "X-MS-InvokeApp":["1; RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 06 Apr 2015 22:17:23 GMT"],
   "Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at
   Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at
    System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
    System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I was not able to find any answer anywhere, so my solution was:
1. Simply upgrade SharePoint Server 2013 to the latest version which in turn updates Microsoft.Activities.Proxy.dll
2. Clear the SharePoint Designer cache
Workflow Error - Sharepoint Designer cannot display the item
   http://community.office365.com/en-us/f/154/t/74327.aspx
I hope this is helpful to somebody
Thanks

Hi,
I doubt its not possible.
http://stackoverflow.com/questions/17925555/windows-workflow-4-appfabrix-1-1-suspended-workflow-will-not-resume
http://social.msdn.microsoft.com/Forums/en-US/fd85c5f9-36dd-4be5-872f-9ba73b1eb0b8/appfabric-11-for-windows-server-versus-workflow-manager-10?forum=wfprerelease
http://seroter.wordpress.com/2012/11/02/interview-series-four-questions-with-jrgen-willis/
Please remember to click 'Mark as Answer' on the answer if it helps you

In Sharepoint 2013 Workflows, can a task be re-assigned?

Similar Messages

Maybe you are looking for