In SM50 UP2 Running all the time with report SAPLNDE_ASSET_MASTER_UPDATE

Dear all,
I've this strange situation. After the restart of the appliacation and DB instance in SM50 the 2 UP2 WPs are all the time running on  Report / Spool action : SAPLNDE_ASSET_MASTER_UPDATE and the main program is RSM13000. Action is Sequential read from table ANEK.
There is no Background process running or DIA. Tablespaces are all OK. And there is no any short dump.
We use Oracle 10.2.0.4 on HP-UX 11.31 , ECC 6.0.
Does anyone knows what is the problem? Why this WP UP2 are all the time used by this report (but with very short time it starts many many times in a cycle)?
Thank you in advance.
BR,
Ruzica

Hi,
Please check for lock entries in SM12 for the mentioned table. Ideally there should be no table entries older than 24 hours.
Probably, you have an OLD active background job.
You may also try activating trace and see if it helps.
Regards,
Varun

Similar Messages

  • My Macbook Late 2008 Fan Running All The Time

    Guys my macbook fan keep on running all the time is there any problem with the system? With this im attached my report, please anyone help me.
    Love u Guys for a big help!
    Hardware Information:
              MacBook (13-inch, Aluminum, Late 2008)
              MacBook - model: MacBook5,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 3:25:6
    Disk Information:
              FUJITSU MHZ2250BH FFS G1 disk0 : (250.06 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Brainy (disk0s2) / [Startup]: 106.72 GB (14.08 GB free) (Low!)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
                        Bunker (disk0s4) /Volumes/Bunker: 142.34 GB (39.09 GB free)
              HL-DT-ST DVDRW  GS21N 
    USB Information:
              Apple Inc. Built-in iSight
              Apple, Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Configuration files:
              /etc/hosts - Count: 4
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [not loaded] com.google.GoogleContactSyncAgent.plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              uHD-Agent
              iTunesHelper
              Google Drive
    Internet Plug-ins:
              AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 10.1.1 3rd-Party support link
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              QuickTime Plugin: Version: 7.7.3
              SharePointBrowserPlugin: Version: 14.1.0 3rd-Party support link
              Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions:
              Open in Internet Explorer: Version: 1.0
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              BlueStacks Install Detector: Version: Unknown
              WangwangPlugin: Version: 1.3 - SDK 10.8 3rd-Party support link
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
    Old Applications:
              dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
              dynamiclinkmediaserver:          Version: 6.0.1 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
                        Brainy: Disk size: 99.39 GB Disk used: 86.28 GB
              Destinations:
                        Backups [Local] (Last used)
                        Total size: 465.44 GB
                        Total number of backups: 2
                        Oldest backup: 2014-04-01 07:28:31 +0000
                        Last backup: 2014-04-01 11:19:32 +0000
                        Size of backup disk: Excellent
                                  Backup size 465.44 GB > (Disk size 99.39 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  21%          Google Chrome
                   8%          WindowServer
                   2%          kextd
                   2%          EtreCheck
                   1%          hidd
    Top Processes by Memory:
              188 MB          mds_stores
              139 MB          Google Chrome
              139 MB          com.apple.IconServicesAgent
              131 MB          softwareupdated
              90 MB          Finder
    Virtual Memory Information:
              4.62 GB          Free RAM
              2.04 GB          Active RAM
              296 MB          Inactive RAM
              816 MB          Wired RAM
              2.49 GB          Page-ins
              0 B          Page-outs

    the fan always runs, usually you cant hear it. Right now my fan is running at 1996RPM and I would know it was on unless I checked.vv Is is running loud all the time?

  • Does GeForce 7350LE video card fan run all the time or at certain temperatures?

    I have a HP Pavilion m8147c  Media Center with AMD Atlon 64 X2 Dual Core Processor 5600+ 2.80 GHz  3GB Ram and when running lately the monitor has started to go into sleep mode or something.Sometimes there is a warning that says something like no signal from DVI and one more but doesn't stay on long enough to read it all.I am running Vista Home Premium 32 bit.I had just installed a new game but pretty sure that has nothing to do with it as I used System Restore and backed up to a time before it was installed.At first it was only when playing games but now it happens with hardly anything running.This pc was bought in july 2007 and I have another desktop but I let my wife use one and I use the other.I opened the case and cleaned out all the dust but noticed when I started it up again the fan is not running on the video card.I don't know if it comes on at certain temps or runs all the time but I feel this is the problem.It has been on for about an hour and not come on at all.Any information will be appreciated.
    This question was solved.
    View Solution.

    captna wrote: Thanks Hanspuppa for the help you've given.I have two more questions.Why do I need the NVIDEA drivers when I will be installing a GIGABYTE card,and the Memory Interface on both cards is 64 bit,how does that affect a 32 bit Vista operating system?Just curious as I have never had any dealings with a video/graphics card before and I would think that it should be a 32 bit but since the GeForce 7350LE is also 64 bit it obviously works..I really appreciate the links and I am ordering the card now,thanks again you.For some reason I am not getting email notices when you reply but I am checking back every so often to see.
    Hello captna, Usually when you purchase a new video card or other hardware device, the drivers that are included on the CD are an older version, sometimes as much as six months old. The chipset on any Brand of a given model would be either an Nvidia or an AMD ATI.
    The chipset is the main component of the video card that controls most of the operations of the video card.
    Since all the manufacturers of the Nvidia video cards use the chipset purchased from Nvidia, they are all the same chipset for any particular model. The different manufacturers can and do add or enable features for their particular cards, but the chipset is still the same.
    Since the drivers from the manufacturer would be an older version, and Nvidia releases new versions quite often, it would be best to use the Nvidia drivers, since they would have updated fixes and sometimes features, and added support for some newer cards.
    Your reference to the Memory Interface on both cards is 64 bit, has nothing to do with your version of the operating system. It just relates to the way, and speed of the interaction of the video card with the system (buss).
    The higher the number of the Memory Interface, the more data that can be moved in and out of the video card, which results in a faster video performance. This just becomes important when playing games for the most part.
    Using the system just for web surfing, emailing and some light gaming, would not have that much effect on the system.
    More important to the system would be the amount of video card onboard memory. The Gigabyte has 1 GB of onboard memory compared to your original video card with 128 MBs of memory. This additional memory would likely show a slight performance increase in any light gaming.
    You want see much, if any difference in the performance of your system, with the exception of perhaps the light gaming performance increase, with the new Gigabyte video card over the  GeForce 7350LE. You should not  experience the heat related issue as you had with the faulty fan on the  GeForce 7350LE.
    You can go into your personal settings on the Forum and select to not receive the email notices when someone responds to one of your post. Several years ago while on the Dell Community Forum, I would receive over a hundred emails every day until I disabled this feature.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Fan Runs All the time and computer is slow!!!

    Hello All,
    My fan is running all the time, the battery won´t hold it´s charge like in the beginning, it´s a replacement battery, but the computer is starting to act erratically. I think it may be a temperature problem, but am not sure what to do about it.
    Help!!!
    SEQU

    Welcome to the Apple discussions.
    First, I would run your Apple hardware test, to ensure the fan is operating correctly. Find the original OS X disc that came with your system that says 'AHT Version x.x' in small print on the label. Insert it, reboot holding the option key down, choose Apple hardware test, click the arrow to the right, follow directions and choose the extended test. You should hear the fan come on as it tests it. Does it give you any error messages? If you have either of the TechTool programs, they can do the same testing.
    Assuming the hardware checks out, when you hear the fan go on, bring up your activity monitor, which is on your hard drive in applications/utilities. Do you see any program consistently using 50% or more of the system? That would cause your system to run hot.
    Do you have any print jobs which didn't complete normally? OS X can try and complete the job, which can use CPU cycles, and generate heat.
    You can download a temperature monitor from http://www.bresink.com/osx/TemperatureMonitor.html if you want to monitor the system temperature.
    On your battery, what is the full charge capacity and cycle count? Click the blue apple, about this mac, more info, and Power. Also, how long a charge does it hold?

  • Fan running all the time - 2011 21.5 inch i5 iMac

    I purchased a new 2011 21.5-inch: 2.7GHz i5 on Friday just gone (2 days ago). All was going well with the new toy until this morning (Sunday).
    Suddenly the CPU fan was running all the time and at full speed when the computer was not under any real load - very noisy.
    I have reset the PRAM and SMC several times now. Within 30 seconds of each reboot the CPU fan reaches 4000 rpm and stays there.
    When I run a hardware test I get the following error - Error 4SNS/1/C0000008:TS2p--124. This error is detected under both the quick and extended tests.
    I do have to say that I am disappointed that 2 days out of the box it looks like I am return the iMac to the Authorised Reseller.
    Can anyone confirm my understanding that:
    a) the CPU fan running loud and hard (4000 rpm) when not under load is NOT normal
    b) the Error code above relates to the logic board
    c) next step is take it back to Apple or the authorized reseller from where it was purchased.
    Cheers
    Shaun

    4SNS/1/C0000008:TS2P--124
    When U install the SSD under the optical drive(OD), the air from the OD fan that was supposed to swing under the OD to exit on the uppper vent has no where to go and hence swings across and exits mostly through the vent on the other side near the camera whereon lies a Skin sensor, which blows away/damages tricking the iMac to believe that the CPU is hot and the CPU fan starts to run at full speed of 4000rpm and the Apple hardware shows error 4SNS/1/C0000008:TS2P--124.
    This skin sensor will then need to be replaced.
    The CPU Fan cannot be controlled by any software.
    The only options available are:
    1.Change the primary HDD with a SSD.This will result in the HDD fan running at a higher speed as the SSD does not have any moving parts.The HDD fan sensor gets to believe that the HDD is hot since it does not get inputs from the SSD.Once you change to SSD you can use software to control the HDD or the Optical fans.
    2.Change the Optical Disk drive with a "SSD in a Optical Drive(OD) Caddy".This will result in the optical drive fan running at a higher speed as the SSD does not have any moving parts.The OD fan sensor gets to believe that the OD is hot since it does not get inputs from the SSD.Once you change to SSD you can use software to control the HDD or the Optical fans.
    Do not use the OWC or other dual drive kit that advice U to put a next SSD under the OD, unless ur iMac is under warranty or u have plenty of technical skills & luck.

  • Fan running all the time on 2010 mba, fan running all the time on 2010 mba

    since i have installed osx lion on my 2010 macbook air the fan is running all the time. any ideas why or should i reinstall snow leopard? my mba is 13inch 1.87 with 2gb and 128gb hdd.

    If the CPU is running at 100%, that will cause the fans to rev. Try logging into another User account and see what happens there.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • Is it possible to make sure the app runs all the time either in the foreground or background, User should not have the flexibility to stop it from running

    Hello all:
      I have an enterprise app and i need to make sure it runs all the time.
    If the app is not running i should silently make sure it restarts again.
    Any ideas on how it can be done. It is an enterprise app
    Thanks

    Hmmm....
    How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
    "Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
    Not sure on the above.
    Please correct me if this is wrong!
    Ben
    Message Edited by Ben on 07-19-2007 08:26 AM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • After the latest Java Update, this is running all the time

    Anyone know what JavaApplicationStub is, and why it's running all the time now? I noticed this after the last Java update from Apple, which mentioned downloading something from Oracle, which I never did. thx!

    I have been experiencing this exact same problem ever since I upgraded.
    In addtion to what Mflor describes as the problem that's occurring, I even experience this when I'm playing my iPod on my docking station through the AppleTV. It just stops midway through the first song and continues to do so after 5-7 plays and that's only if I'm patient enough to deal with it.
    The message I get quickly once this occurs is that my AppleTV doesn't have an internet connection, but that message only appears for a quick second before it returns to the main AppleTV menu with ALL the options.
    I've even tried rebooting the AppleTV and this still occurs.

  • Laptop fan runs all the time, broker runtime cpu usage after Windows 10 final upgrade

    ENVY 17t-J100 Leap Motion, 16 GB RAM, i7, SSD primary, HDD secondary drives. Avast antivirus free. Windows Firewall. The laptop had Windows 8.1 and everything was great. I did the Windows 10 Home free upgrade on Day 1. Everything seemed fine. Fingerprinter reader and everything works. Great. But then I noticed that the fan was always running and the left side of the metal casing gets hot. In task manager heat map sorted by CPU usage, Broker Runtime is at the top. Not much ram, about 10 MB. But the CPU usage is always 20% and higher. Doesn't seem like much. But it makes the fan run all the time and the laptop heats up with it running all the time. Anyone else seen this? General internet searching shows this has been an issue with Broker Runtime since Windows 8 and not unique to any brand of computer. But it wasn't like this when I was using WIndows 8.1 One forum said it was the P2P Windows update feature and my laptop was sharing updates. So I disabled that and rebooted. No change. Now I see some people saying it is the Live Tiles features in the Start Menu. But I had live tiles with the WIndows 8 menu and no issues. The only way to disable Live Tiles globally is to edit the registry, and I shouldn't have to do that for this. And I like Live Tiles. So not sure that really is the issue either.

    hockeycanuckjc wrote:
    Have all Windows Updates on Windows 10 been applied since installing it? I know there are people weary to update Windows 10 since there have been a few news reports with some people having the infinite reboot loop after installing a particular update  For me, yes. All updates applied and automatic updates enabled. This Runtime Broker issue has been there since the upgrade and all updates to this point.

  • T61 fan runs all the time on AC, does not when on battery

    Hello,
    with the lastest BIOS (and those before) my T61's (8889)  fan runs all the time when it is AC powered. (After initial start it begins with 0, then ~2500 rpm, then ~3100 rpm and then stays there even if idle).
    When on battery under the same circumstances, it doesn't go above ~2500rpm (which is far less noisy then the ~3100rpm level) and often it even stops.
    As far as the BIOS settings allow, it is trimmed to max. power saving also when AC powered but still it's getting on my nerves.
    Can Lenovo please look into this and make it as quiet as it is on battery also when on AC?
    P.S. I cannot see that the temperature levels as reported through ACPI are any higher on AC then on battery, so I don't understand why the fan has to run all the time that loud when on AC.
    Thanks,
    Daniel

    Hi Daniel,
     There are two options for you to consider:
    1) Better CPU speed management:
    - Install a utility called "RMClock" to better manage the CPU (it's a free utility that throttles the CPU to run at different speeds depending on the needs - the CPU speeds increase automatically to full power when required).
    - By regulating the CPU speed, the fan will not need to work that often to expell hot air, because the CPU generates much less heat.
    - you will find a quick "how-to" for using RMClock --> HERE
    2) BIOS thermal management
    - You can change the BIOS settings for the "thermal management" (enter BIOS, choose "Config", then "Thermal Management" ) . Change the fan control from "performance" to "battery optimized" under the "plugged-in" option. This will reduce the frequency with which the fan runs, but beware that if your system is plugged in and you're not using any CPU management - meaning that your CPU is running at full speed, then the system will heat up more than you'll be comfortable with!!
    I would therefore suggest that you use a CPU throttling management utility (like RMClock mentioned above) together with the thermal management option in your BIOS. This will reduce the frequency with which the fan starts and operates but still keeping the system cool.
    A completely different approach is to install and use "Thinkpad Fan Control" -- read this thread ... Be aware that the utility takes a lot of tweaking to get the settings right, but also be aware that you can damage your system if you do not make the right settings!!!
    Hope this helps!
    Steve
    Message Edited by icantux on 07-09-2008 02:18 PM

  • Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Hi,
    I have the check box on a second Partition  but not on the Time Machine one
    I forget what I did now to get this called "Recovery HD"
    For the rest try https://discussions.apple.com/docs/DOC-4055  User Tip that links to Pondini's work on Time Machine.
    10:17 pm      Friday; May 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Reboot the iphone to install a program and has been left all the time with the apple on the screen

    reboot the iphone to install a program and has been left all the time with the apple on the screen.
    takes so hours without turning away. I can do?

    Reset your phone , you wont lose anything. Hold the home and off button down until the apple symbol comes up.

  • Fan runs all the time after upgrade to 10.4

    Upgraded to 10.4 about a week ago and now the fan runs all the time. I lowered the processor to reduced performance because the fan noise was very loud. Doing this lowered the fan speed but did not stop it. Memory usage is not a problem, shows 75% free.
    Before 10.4 was using 10.3 fan ran at times but never all the time.
    Any ideas.

    Tom, have you down loaded an app like "X Resource Graph", I think I got it at VersionTracker, which will tell you what fan is running at high enoug rpm's to generate noise. Plus it will give you cpu usage and temps plus hard drive temps. If its the cpu fan and the cpu is really working, go to the Activity Monitor in the utilities file and see what app is causing the problem. I don't know what to do if it's the hard drive or system fan. My system fan rarely goes over 1800 rpm, my hard drive stays between 2000 and 2200 but my cpu fan will accelerate when its under pressure to to over 3000 rpm. I just start hearing the cpu fan when it gets to 2400 rpm.

  • Brand new iMac 3.4GHz fan runs all the time - how do I stop it?

    Hi, just opened my shiny new imac but the fan runs all the time and very loud! Has anyone any ideas how to fix this or should I return the imac to apple?
    I've also noticed that none of my external drive icon show up on the desktop - nor does the imac hardrive icon appear - any ideas?
    Thank you in anticipaction.

    Try an SMC reset, you may need to do it at least 2x.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for

  • Report Admin - Print Preview Error

    In reports admin, I get the following error when I select print preview:error marshalling arguments; nested exception is; java.net.SocketException; Socket write failed.Any ideas?

  • Trying to resolve ntlmv errros mounting CIFS network shares via fstab

    Kernel: 3.4.2-2 WM: Openbox About 6 months or so ago, which was after about a year on my current install with no issue, I began getting an ntlmv error when auto mounting samba shares at boot.  Everything still worked but I continued getting an error

  • Push back action not available in action drop down

    HI, I don't see the PUSH BACK action available in action drop down in bpm worklist. Is there some setting i have to do, to make this action available in system action? Thanks Manish

  • Can't Install SB LIVE DRI

    Hi guys, I have SB LIVE 5.(SE). model: sb000 I don't have the installation disk. I Downloaded from creative Website the file SB24_WEB64_LB__04_0055.exe but I try to install it I get an error message: "setup is unable to to detect a supported product

  • 10.6.1. top sites

    Looks like they still haven't fixed this ..... after I'd sorted out my iTunes crashing problem, this seemed to be the only glitch, and still only on my iMac.