In Smartform able to see the logo in print preview but logo not printing.

Hi All,
        In Smart form there is a logo which i am able to see through Print Preview but when trying to print that form the logo is not printing. What might be the reason for this problem, please suggest a solution for this problem.
Regards,
Siva.

Hi,
     I am able to see the logo for all other smart forms i have developed using the same printer. But the problem is only with this Form. If the printer settings are not correct  i should not be able to get the output for any form using that printer.
Regards,
Siva.

Similar Messages

  • I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

  • Not able to see the objects in DSO Display but available in object list

    Hi All,
    I am facing a weird  issue in DSO.
    When I am right clicking DSO and selecting the Object list I am able to see all the (30) objects, 
    But when I am right clicking the same DSO and selecting Display I am able to see only some objects (20) objects.
    DSO is in Active and execute  version only.
    Can any one tell me what may be reason for that.  Because whenever I am trying to transport I am getting the error.
    Regards
    Sankar

    Hi,
    U get error when u activate the so in original system or only while u try to transport it?
    what does th error message say ...are those info objects u are trying to add in active state?... If u are deleting any info object from the dso make sre u have deleted the data from that dso in the terget system before the transport
    Regards,
    Rathy

  • I can see the main menu on TV but does not respond?

    I have tried disconnecting Apple TV but can not get it to respond with remote, don't know what else to do, any suggestions?

    No luck, remote does not let me go to settings to change anything.  Tried holding down MENU key with right button for 6 seconds and will not respond.  How frustrating, been trying for the last 2 hours and nothing.  Appreciate your help....thanks.

  • Not able to see the result in particular column of BPC report

    Dear All,
    I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
    Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
    Request your help to resolve such problem please.
    If you need any information, please let me know.
    Thank You
    Kind Regards
    Anukul

    Hello Anukul,
    In the report what type of data you are trying to check in that column. can you please brief about report.
    And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
    Regards,
    Rajesh.K

  • Not able to see the Adapters@Integration Directory!!

    Hi,
    I have created Data types,Messages Types, Message Interface in Integration Repository.
    I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
    <b> Its not showing any Adapters in ADAPTER TYPE option and also
    Transport Protocol and
    Message Protocol are blank.</b>
    What could be the reason??
    Please guide me in order to complete my scenario.
    Thanks in Advance.
    LNM

    hi madduri,
    check these links....
    Not able to see the adapter types in ID
    Adapter Engine not found in ID
    <b>check the last post here.... u will get ur answer !!!</b>
    Adapter Type not found
    Do these steps
    1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
    2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
    /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
    3) Goto Repository (Design)
    4) Choose -> Tools -> Import Design Objects
    regards
    BILL
    **mark the thread  answered when u got ur answer

  • Logo Visible in Print Preview, but not in pdf and hard copy

    Hi,
    We have uploaded a logo to be shown in the footer. We are able to see the logo in the print preview, but when we print the invoice (SAP Script),  it is not seen in the hard copy. We tried by saving it as a pdf, even in the pdf, it is not displayed.
    We are on SAP 4.7
    Please help.
    Thanks in advance.
    Mick

    hi,
    Am not sure what the exact issue could be, but i am expecting there may not be sufficient space to fit the logo. I suggest you to check the output by placing the logo in header whether its coming or not in hardcopy, that may help you.
    regards
    harris

  • Not able to see the output in sost when sending the image in email body

    I am sending the image in email body and when m trying to see the output in SOST then it showing a page 'you are not connected to the internet'
    I am able to see the output when m saving local objects but when m saving it in some package its showing me this page
    Kindly help it
    Regards
    Pratham Kapoor

    Hello Prakash,
    Thanks for the reply
    I am able to see the mail in SOST but when I click on the Display Document to see the content of the mail then I am getting this error of 'you are not connected to the internet'
    My Program is to put the logo in my email body
    I am sending you the attached image

  • I am not able to see the missed calls when my phone is locked.

    I am not able to see the missed calls when my iphone 3gs is locked.And how to set own ringtones in iphone 3gs

    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static.  This pattern then cycles over and over.  I can't get the image to stay on the tv screen.  Any ideas?

    When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static.  This pattern then cycles over and over.  I can't get the image to stay on the tv screen.  Any ideas?

    Try:
    - Going to NF support site/contacting them
    - Try a different adopter
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • I've just upgraded to IOS 7.0 on my iPhone 5 and the calendar is horrible!  I want to be able to see the who day at a glance not a few hours.  Does anyone have any suggestions?

    What's happened to the calendar in IOS 7.0?  I would like to be able to see the whole day at a glance not just a few hours.  Any suggestions?

    I know what it looks like and what it does.  I need to be able to see the whole day!  A few hours is not helpful for knowing whats ahead.  I don't want to scroll I just want to be able to look at a glance.  Does anyone have any helpful suggestions.

  • Not able to see the data in the report

    Hi All
          In my cube i am having data.But when i am running the report ,i am not able to see the data.
        The error its throwing is -No Applicable data found.
        what could be the problem,please provide me the idea to solve the problem.
    Thanks&regards
    syam prasad dasari

    HI,
    See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
    Thanks

  • Not able to see the tree on the jspx page after running

    Hi All,
    This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
    After running the jspx when I am moving to the fragment I am not able to see the tree.
    However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
    Can anybody put some thoughts on this.
    Thanx
    Kanika

    Thnx for your replies..
    I am dropping taskflow as region . I am not using the switcher component.
    On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
    Please advice how to accompolish this now??

  • Not able to see the changes in log

    Hi All,
    I have a question here. Audit log is enabled as well as changes lofs is also enabled in my system ECC 6.0. Suppose i have changed some table entry via SE16, i mean i have updated a table via SE16, but i am not able to track the changes in SM20 or SCU3. the logs only shows that i have executed the transation but there is not any evidence of which table i have updated the entry, Is there any way to find out this in SAP in my scenario?
    Regards,
    Subhash

    Got it, Table was not in Authorization group so it was not showing the data updation information, after assigning the table into Auhtorization group now i am able to see the updated records for that table in SCU3

  • Report exection problem for one user - not able to see the data.

    Hello Friends ,
    Need some help . I have got the one ticket from bussniess side about the report execution .
    Unfortunately , I am also not having authorisation of that report due to sensible data.
    Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
    I executed the same report through RSSMQ via his user id , and I got the  below message.
    All value were selected . Hierachy Authorisation cannot be used.
    A displayed hierachy requier a hierachy authorisation .
    But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
    could you please let me know , how can I check more ?
    Regards,

    after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Maybe you are looking for