In smartform folder's size appears smaller than main window

Hi all,
I used folder and table in main window. table takes the width of main window but folder does not takes. in print preview folder's size appears small then table. please suggest how to increase the size of folder.
regards
shahid

Hi,
Try this way , First create a window inside the main window then create your folder node. Generally if you are creating a node inside the node it takes the default of main window.
Thnaks,
Abhijit

Similar Messages

VAULT size is smaller than the LIBRARY

my vault size is smaller than the aperture library. is it saving everything? it seems like the two should be the same size or at least close to the same size. i regularly update my vault so that it is current with the library. VAULT = 168 GB | LIBRARY = 262 GB

what is the consequence if i totally turn previews off?
The major consequence is that you will not be able to share images from your library through the media browser. So if you want to email an image for example or add an image to a document you will need to export the image first rather then be able to get the preview from the library.
Also if you have referenced originals and the originals go off-line nothing will appear in the library. If you had previews for those images you would still see them and be able to do tasks like rate them.
Finally some operations might appear slower as you won;t see anything on the scree until the image you are looking at is rendered. With previews while Aperture is rendering the image in the background it will display the preview.
It is possible to selectively maintain previews for some projects and not for others. This might be a comprise position between having previews for al images and having no previews at all.

ORA-13044: the specified tile size is smaller than the tolerance

Hi,
I get the oracle error ORA-13044: the specified tile size is smaller than the tolerance when I do the following point cloud clip:
8 sdo_geometry(2003,29903, null,
9 mdsys.sdo_elem_info_array(1,1003,3),
10 mdsys.sdo_ordinate_array(316504,316510,234084,234090)),
However the bounds of my point cloud are
316500 to 316511 and 234080 to 234092 and my tolerance during point cloud creation is set to 0.000015 (I have alterated this value before to make it smaller but nothing seems fit).
Where do I set the "tile size"?
The set consists of 100 points and blk_capacity is set to 50.
Any help is really greatly appreciated.
Cheers,
F.

Hi BKazar,
thanks for responding.
Yes, I tried out all sorts of things and swapped the numbers to see if that would fix the issue. It did not.
I have found out now though what the issue was. When I loaded the data file into Oracle, the guy who gave me the file said that the first column is the longitude, but it wasn't. After switching sdo_point.x and y the error disappeard.
I suppose the sdo_srid was expecting a different range and got confused because my long and lat were swapped.
Cheers,
F.

Delete every file which size is smaller than 10kb

Hello,
how can I delete every file which size is smaller than 10 kb?? I'd thought that i can do that with the methode "length()"... but nothing happens.
File tryToDelete = new File( ".");
String [] listing = tryToDelete.list();
for (int z = 0; z < listing.length; z ++)
    if ((listing[z].length()) < 10000)      //does anyone know what is wrong here??
         File away = new File(listing[z]);
         away.delete();
}thanks for helping ...

ups... you are right... but I still have an problem...
I want to delete only the files which are smaller than 10 kb and starting with the "http".
But it doesn't work, when I run the code:
File tryToDelete = new File( ".");
String [] listing = tryToDelete.list();
for (int z = 0; z < listing.length; z ++)
    if (listing[z].startsWith("http");
         File away = new File(listing[z]);
         if ((away.length()) < 10000)
         System.out.println(away);
}then he prints me out ALL files which size is smalletr than 10000. But I only want to have the files which starts with "http".
What is my error??

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
Accepting that it works fine with another iPad, I suggest trying the following:
1. Restart the non-working iPad
2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
iTunes 10.3 is now available, and that may make a difference.

Smartform problem how to make second page main window dynamic?

Hi SAP Community,
I am facing a problem with designing a smartform. I have taken a table in the main window of the first page, and the main window length varies according to the number of entries in the table. If the records are more than that can be adjusted in the first page then the ramaining records move to the second page main window. After the second page main window i have defined a window which i have marked to get displayed after the main window, but the problem i am facing is that that the second page main window is geting overlapped with the window defined to come after it. Can any one help me with how to control the length of second page main window dynamically.
Regards,
Tushar

Hi,
Normally, to trigger next page the main window is mandatory.
However, if the contents of main window are not sufficient enough to move over to next page then the next page would not get trigerred.
Moreover, please check whether the table of contents in the first page are also existing in the next page otherwise you need to trigger a new page by using a command.
Also please direct the next page of SECOND page to SECOND itself and check.
Regards,
Ram

IPhone 3G physical phone size is smaller than others?

I have noticed that my iPhone 3G (16gb) is actually shorter (in size) than my wife's? I use the Inspiretech case and have noticed that my phone actually shifts around a little bit but when I put my wife's phone in there, it holds the phone correctly and doesn't shift. I also experienced this with my first case which was a DLO-Jam Jacket where the phone would slide down the jelly like case a little bit. My wife's phone did not do this in the Jam Jacket either. Has anyone experienced this before? I have modified my latest case by stuffing a couple pieces of folded up paper in it to make up the extra space. Is this something I should worry about? Will this forever be a neusance?

This is my case (http://www.inspiretech.com/p-377-iphone-3g-full-protector-case-blue.aspx) and it's for the 3G and it fits my wife's 3G snuggly. I'm thinking my phone is a few millimeters shorter. Almost a manufacturing defect that will just be a neusance the rest of the phone's life

Why is the Log Area size much smaller than the log volume

I have been following up on an Early Watch report that has been generated for our production SCM 5.0 system running liveCache 7.6.02 Build 14. The alert says "The LOG volumes size in your system is too small. Recommendation: Configure LOG Volumes to at least 2 GB". There are two interesting things about this.
1) I have spent the last couple of days reading all the OSS Notes, and MaxDB documentation I could find, and this does not seem to be documented as a recommendation anywhere. Does this seem like a realistic recommendation without taking into account the level of change actifity?
2) There is a single log volume allocated with size 2,097,160 KB. In production LC10 and DBMGUI report this to be correct size under volume details, but only list the total log area size as 1,706,328 (81% of the volume size). We have a non-production environment with exactly the same size log volume, but it reports that the log area size is 2,032,008 KB (97% of the volume). What leads to these different amounts of wasted space, and is there any way of getting the database to start using it?
Thanks,
Mark

Hi Natalia,
I did read 869267, several times. It does not answer my questions which is why I posted here.
DBMGUI version = 7.6.00.25
DBMCLI commands for PL1 (Production)
> xinstinfo PL1
IndepData           : /sapdb/data
IndepPrograms       : /sapdb/programs
InstallationPath    : /sapdb/PL1/db
Kernelversion       : KERNEL    7.6.02   BUILD 014-123-152-175
Rundirectory        : /sapdb/data/wrk/PL1
> dbmcli -d PL1 -u control,control
dbmcli on PL1>db_state
OK
State
ONLINE
dbmcli on PL1>info log
OK
END
Name                            | Value
Log Mirrored                    = NO
Log Writing                     = ON
Log Automatic Overwrite         = OFF
Max. Size (KB)                  = 1706328
Backup Segment Size (KB)        = 699048
Used Size (KB)                  = 104640
Used Size (%)                   = 6
Not Saved (KB)                  = 104640
Not Saved (%)                   = 6
Log Since Last Data Backup (KB) = 0
Savepoints                      = 5210
Checkpoints                     = 0
Physical Reads                  = 2469115
Physical Writes                 = 15655616
Queue Size (KB)                 = 48000
Queue Overflows                 = 646
Group Commits                   = 98205
Waits for Logwriter             = 10957511
Max. Waits                      = 10
Average Waits                   = 0
OMS Log Used Pages              = 0
OMS Min. Free Pages             = 0
dbmcli on PL1>param_getvolsall
OK
LOG_MIRRORED                     NO
MAXLOGVOLUMES                    2
MAXDATAVOLUMES                   14
LOG_VOLUME_NAME_001              262145     F /sapdb/PL1/saplog/DISKL001
DATA_VOLUME_NAME_0001            524289     F /sapdb/PL1/sapdata/DISKD0001
DATA_VOLUME_NAME_0002            524289     F /sapdb/PL1/sapdata/DISKD0002
DATA_VOLUME_NAME_0003            524289     F /sapdb/PL1/sapdata/DISKD0003
DATA_VOLUME_NAME_0004            524289     F /sapdb/PL1/sapdata/DISKD0004
DATA_VOLUME_NAME_0005            524289     F /sapdb/PL1/sapdata/DISKD0005
DATA_VOLUME_NAME_0006            524289     F /sapdb/PL1/sapdata/DISKD0006
DATA_VOLUME_NAME_0007            524289     F /sapdb/PL1/sapdata/DISKD0007
DATA_VOLUME_NAME_0008            524289     F /sapdb/PL1/sapdata/DISKD0008
DATA_VOLUME_NAME_0009            1048577    F /sapdb/PL1/sapdata/DISKD0009
DATA_VOLUME_NAME_0010            1048577    F /sapdb/PL1/sapdata/DISKD0010
DATA_VOLUME_NAME_0011            1048577    F /sapdb/PL1/sapdata/DISKD0011
DATA_VOLUME_NAME_0012            1048577    F /sapdb/PL1/sapdata/DISKD0012
dbmcli on PL1>param_directget MAXCPU
OK
MAXCPU 12
dbmcli on PL1>param_directget MAX_LOG_QUEUE_COUNT
OK
MAX_LOG_QUEUE_COUNT     0
dbmcli on PL1>param_directget LOG_IO_QUEUE
OK
LOG_IO_QUEUE    6000
> xinstinfo SL1
IndepData           : /sapdb/data
IndepPrograms       : /sapdb/programs
InstallationPath    : /sapdb/SL1/db
Kernelversion       : KERNEL    7.6.02   BUILD 014-123-152-175
Rundirectory        : /sapdb/data/wrk/SL1
dbmcli on SL1>db_state
OK
State
ONLINE
dbmcli on SL1>info log
OK
END
Name                            | Value
Log Mirrored                    = NO
Log Writing                     = ON
Log Automatic Overwrite         = OFF
Max. Size (KB)                  = 2032008
Backup Segment Size (KB)        = 699048
Used Size (KB)                  = 3824
Used Size (%)                   = 0
Not Saved (KB)                  = 3824
Not Saved (%)                   = 0
Log Since Last Data Backup (KB) = 0
Savepoints                      = 1256
Checkpoints                     = 0
Physical Reads                  = 2178269
Physical Writes                 = 4969914
Queue Size (KB)                 = 16000
Queue Overflows                 = 21201
Group Commits                   = 643
Waits for Logwriter             = 751336
Max. Waits                      = 4
Average Waits                   = 0
OMS Log Used Pages              = 0
OMS Min. Free Pages             = 0
dbmcli on SL1>param_getvolsall
OK
LOG_MIRRORED                     NO
MAXLOGVOLUMES                    2
MAXDATAVOLUMES                   10
LOG_VOLUME_NAME_001              262145     F /sapdb/SL1/saplog/DISKL001
DATA_VOLUME_NAME_0001            262145     F /sapdb/SL1/sapdata1/DISKD0001
DATA_VOLUME_NAME_0002            262145     F /sapdb/SL1/sapdata2/DISKD0002
DATA_VOLUME_NAME_0003            1048577    F /sapdb/SL1/sapdata3/DISKD0003
DATA_VOLUME_NAME_0004            1048577    F /sapdb/SL1/sapdata4/DISKD0004
DATA_VOLUME_NAME_0005            783501     F /sapdb/SL1/sapdata1/DISKD0005
DATA_VOLUME_NAME_0006            783501     F /sapdb/SL1/sapdata2/DISKD0006
dbmcli on SL1>param_directget MAXCPU
OK
MAXCPU 4
dbmcli on SL1>param_directget MAX_LOG_QUEUE_COUNT
OK
MAX_LOG_QUEUE_COUNT     0
dbmcli on SL1>param_directget LOG_IO_QUEUE
OK
LOG_IO_QUEUE    2000
Thanks for the explaination of the reserved space for the Log Queue pages. This does explain why there is the difference between the two. I think we probably have our log segment size too large. As you can see we do get occasional log queue overflows. Do you suggest we increase the size of our log IO queue higher, and allocate more log volume space to compensate?
select * from SYSINFO.LOGSTATISTICS (on PL1)
1706328;334176;19;334176;19;1879;20305192;64109066;7806480;182151514;12;48000
DBMGUI Log Area Usage
Total Size: 2048.01 MB
Free Log Area: 1330.38 MB
Used Log Area: 335.96 MB
Unsaved Log Area: 335.96
Log since Last Data Backup: 0.00 MB
Thanks,
Mark

Clip Size Imported Smaller Than Original Clip

I imported a QT movie 3.69GB into iMovie and the imported movie was 650mb. I guess using iMovie all this time I just assumed that the size of the clip would be the same after importing into iMovie. Can someone tell me why the drop in file size? Thanks.

It was a clip from a DVD that I had saved at the highest quality as a QT movie no compression using Cinematize.
When I imported the clip into iMovie I used no compression 29.97 fpm, 640 by 480, and sound was stereo, 48hz, 16 bit.

My iTunes library is not appearing in the main window, only the iCloud stuff. How can I get my full library to appear again?

I just opened up iTunes and my full music and film library was not visible. Only files that have a cloud icon next to them show up. How do I get full music and film access back again?
I never use iCloud and don;'t believe I ever set it up to operate on my system.

Hello Stormjib,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes Library issues. Your iTunes media folder may have been move or modified, which would explain why you can only see media in the cloud:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

My email is listed but it does not appear in the main window so I can read it

I get a list of my email but the message does not appear in the window. How can I get the whole email to appear when I tap on it?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

In Smartform, facing difficulty in designing layout in Main Window

Hi,
I have a requirement to design a smart form layout as given below: (pls copy and paste below structure in Excel Sheet sothat its easy to understand from ur end).
Oper     W/C     Production Resources & Tools                                         Confirmation#
A     B     NC Tape | NC Specification | Mos No. | Fixture No.
          C            | D                        | E             | F
          Procedure No.                 |                 Specification No.
          G                                   |                  H
          Description
          I
Qty Rcc     Qty ACC     Par/By    |   Qty Rej      | Rel-Note/Department     Date
____     ____     ______   |   ________    |   ___________________     _____
Here, the issue is while displaying the header details I am unable to populate the item values (here A,B,C,------I are the item values) for the Header columns (such as Oper, W/C,.........NC Tape,.....Procedure No.,.....Description....ect)
Main issue is in designing multiple header column information with respect to my requirement.
If any body understand my req and problem pls suggest how to design the same.
Reply me for further clarifications.
Thanks & Regards,
Nagesh.

Hi,
Oper W/C Production Resources & Tools Confirmation#
A B NC Tape | NC Specification | Mos No. | Fixture No.
C | D | E | F
Procedure No. | Specification No.
G | H
Description
I
Qty Rcc Qty ACC Par/By | Qty Rej | Rel-Note/Department Date
____ ____ ______ | ________ | ___________________ _____
Oper W/C Production Resources & Tools Confirmation#
A B
For above use one Table Node
NC Tape | NC Specification | Mos No. | Fixture No.
C | D | E | F
Another Table node
Procedure No. | Specification No.
G | H
Another Table Node
Description
I
Use one Teplate
Qty Rcc Qty ACC Par/By | Qty Rej | Rel-Note/Department Date
____ ____ ______ | ________ | ___________________ _____
Use Another Table node
If you can give clear idea about Spec then i will surely help you.
???????? is not clear specification Because i am unable to understand A B then Contionuation
NC Tape| Nc Specification|xx|xxx these are headers??? for next item C D E F.

Possible to print Int.Tab data in a window other than MAIN window in Script

Hi,
Can we print a internal table data in a window which is a VARIABLE Window in SAP Script? my requirement is not to print in MAIN Window.
Thanks in Advance,
Jakeer.

Hi,
You can do that.But main window is must.
Create a text element and please check it maynot overflow if so data will be truncated.
For not printing main window :
Do one thing set the main window margint to the botom of the form.
Then create a text element in main element
NEW
NEW-PAGE
NEXT
NEW-PAGE = 'NEXT'

My fronts are smaller than what I set in InDesign?

While Using InDesing to create an e-book, I found out that the fronts that use in the documents appear smaller than what I wanted in epub format?
example: my front size is 20, but when I export to epub, the front size is about 12 or 10!
I do not understand why? It doesn't have anything to do with the fronts that I used (Times News Roman)
It is driving me crazy as I do not know how ot solve it!
Please help!

At first I thought: funny typo! Then I saw that 'front' was used everywhere. If one does not even know what it is called I start to wonder if one should do the work...
Anyway: the reader sets the fontsize on the e-reader device for EPUB, not the designer. It is not PDF it is EPUB, it can be changed by the user, so you never know at what size it will be read or where a pagebeak is.
Maybe you should catch up reading on design...

In smartform folder's size appears smaller than main window

Similar Messages

Maybe you are looking for