In SOP- transfer forecasted values from material master to info structure?
Hi All,
I wanted to test out a few scenarios. Do you know the answers / can you help simulate and check the below?
1. If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
2. Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
3. If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
Appreaciate your inputs.
Hi All,
I wanted to test out a few scenarios. Do you know the answers / can you help simulate and check the below?
1. If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
2. Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
3. If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
Appreciate your inputs.
Similar Messages
-
Subcontracting PR picking value from material master.
Hi!
We require that the subcontracting pr should pick the value from info record not from material master ,how can we do this ?
thanks and regards,
SuranjanaHi ,
as per std SAP
price in Pr will always be picked from material master
for materials without material master - it has to be entered manually
It cannot be picked from info records
the valuation price in PR is used only to effect a release, if any
regards
Rajat -
Copy of Batch characteristics value from material master to Batch
Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
SandipHi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar -
Picking or copying Characteristics Value from material master
Dear Experts,
Please i create five Characteristics which i assign to a Class ( of type 022 ). The Class is then assigned to materials in the classification View of the Material Master.
I want one of the five Characteristics to copy its values from specific parameter value maintaned in the Material Master.
Please assist on how to accomplish this?
I did the following but did not get the desired results; While creating this Characteristic, in the Values Tab, I filled ''MARC'' in the Tablename field & in the Fieldname field, i enter the technical fieldname of the particular field from table MARC which i want.
I want this particular value to be automatically copied into the Characteristics Value field in the Foreground for eacb batch anytime Goods Receipt is done.
after doing this, anytime Goods Receipt is done & a batch number generated, it takes me to the Classification screen, but this particular field which i desire to be auto updated remains blank.
Please assist ?Hi,
1. This will not automatically updated just as we wil fill the addtional date table and field.
2. you need to write the object dependency to get it updated when you call somewhere
3. Generally in the batch level you will be able to do this .( even you can use function / object dependency )
Reg
Dsk -
Error while udating the forecast value in M.master through RMDATIND Program
If anyone knows please respond urgently.
Thanks in advance.
Cheers
Vallabhaneni
Hi All
Good Day
In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
Actually there are 2 fields exists for tracking limit in structure bmmh1
1.SIGGR and
2.SIGG2
I had given the input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
Can anyone please help me in this case.
Thanks in advance.
Cheers
Vallabhanenidebug your program.
Compare the field content of the value in the field you submitted with the content in field that is checked when message M3 456 is issued. -
Error while updating the forecast value in M.Master through RMDATIND
Hi All
Good Day
In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
Actually there are 2 fields exists for tracking limit in structure bmmh1
1.SIGGR and
2.SIGG2
I had given the input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
Can anyone please help me in this case.
Thanks in advance.
Cheers
Vallabhanenidebug your program.
Compare the field content of the value in the field you submitted with the content in field that is checked when message M3 456 is issued. -
Transfer field Value from ECC to APO
Hi,
I want to transfer a field from material master to APO. For this i am, using a CIF user exit... The field is not available in the ECC side (EXIT_SAPLCMAT_001), but i found a user exit on APO which has this field (EXIT_SAPMMDUSER_005) which i m not sure if it is called.. please help...Hi,
Could you please send the details..What field you are checking..Field name ?
You can explore the below 2 table in ECC EXIT EXIT_SAPLCMAT_001. It has the option for expansion.
OT_CIF_MATKEYCUS
OT_CIF_MATLOCCUS
Thanks
RKS -
Problem while updating the forecast value in m.master by direct input menth
Hi All
Good Day
I am updating the forecast value in material master by direct input method.
my program is working fine when I am running it online.
but when i am runnig in back ground I am getting one error which is mentioned below
Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated BD 078 E
Please anyone can help ne in above case.
Thanks in advance.
Cheers
VallabhaneniHi Hakim
How are you
Thanks for your valuable suggestion.
I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
Can you please help me in the above case.
In Bmv0 transaction first I defined the job and in program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
Alomost it ran for 27 hours and then it has given the message background job terminated.
Job log entries are as follows.
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040840; material number SUJ82J8400; error gravity E
22.12.2008 11:19:46 Transaction 0000040840: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040841; material number SUJ84G3001; error gravity E
22.12.2008 11:19:46 Transaction 0000040841: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040842; material number SUJ84G3002; error gravity E
22.12.2008 11:19:46 Transaction 0000040842: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040843; material number SUJ86G0100; error gravity E
22.12.2008 11:19:46 Transaction 0000040843: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040844; material number SUJ86G0300; error gravity E
22.12.2008 11:19:46 Transaction 0000040844: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040845; material number SUJ86G0900; error gravity E
22.12.2008 11:19:46 Transaction 0000040845: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040846; material number SUJ86G9600; error gravity E
22.12.2008 11:19:46 Transaction 0000040846: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040847; material number SUJ86G9601; error gravity E
22.12.2008 11:19:46 Transaction 0000040847: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040848; material number SUJ86J0000; error gravity E
22.12.2008 11:19:46 Transaction 0000040848: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:20:54 Transaction 0000040848 completed Mat. no. No. of log. errors 0000040848
22.12.2008 11:21:30 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
22.12.2008 11:21:30 Job cancelled
I know it has taken long time to process the job because of I changed the transactions per commit unit (500 to 999999) it kills the system
But I am supposed to provide some number < 999999 in transactions per commit unit
actually I haven't tried like I said above < 999999 because i don't have any hopes.
Please look at this problem and help me in this case.
Thanks in advance.
Vallabhaneni -
Purchase group in Purchase order from creator not from Material Master
Hi All,
Can you please help me with the next one?
Points rewarded.
In the materialmaster is purchase group 44B entered but
The default purchase group of the buyer is 55C. Is it possible
that the value 55C is automaticaly placed in the PO when
the buyer creates the Purchase order?
At this moment always the default value from Material
master is proposed.
Thank you in advance,
Eric.Hi,
You have to look at the overall process.
The idea of the Purchasing Group is to indicate which buyer manages that material in that plant.
SO when the system (or a user) generates a requisition for that item at that plant, the system then knows who should convert it etc.
So my question to you would be, "why have you got a default P group in the material master record that is NOT the buyer who manages that item at that plant?"
If several buyers share a list of materials then just use one P group for the "group" of buyers, instead of separate P groups for each buyer.
The system doesn't have the option to automatically overwrite the P group on the requisition because this may be someone just "helping out" the buyer who is busy and so it does not mean that the requisition should be changed to be linked to this other P group.
You already have the field "created by" on the PO and so if you need to report on who created what, then simply use this field instead of P group.
But the P group on the material master (and therefore the requisition) shoudl ALWAYS be the P group that will convert reqs for this item plant combination.
Steve B -
Inter company PO is not pulling the valuation price from Material Master
Hi Experts,
We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
Could you guys please mention what would be the issue ?
Thanks in advance
IllayarajaHi,
Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
Thanks
Diwakar -
Updation of Consumption values in material master
Dear Experts,
For a FERT ,
When I use strategy 40 , Consumption values ( PGI - Deliveries )are getting updated in MM02 in Forecast view.
whereas,
When I use strategy 50 , Consumption values are not getting updated in MM02 in Forecast view.
Is there any setting to control this updation of Consumption values in Material Master ?
Regards,
SheikHi,
Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
If it is the case, consumption is updated, opposite for un-ticked.
Hope that helps.
Thanks. -
Shelf life from material master not flowing into purchase order
Hai friend
I have set a shelf life value in material master ( both minimum & Total shelf life).
But while creating purchase order, values are not flowing from material master to purchase order.
The field is empty.
How to configure, please help.
Regards
Rammohan1.activate batch management
2.to calculate SLED production date/date of goods receipt is mandatory during GRN
3.Maintain characteristic for production date MCH1 - LFWRT
4.assign this to class
5.Maintain this class to material
6.Now do GR ,it will prompt for production date .based on this ,sytem will calciulate SLED
hope it helps -
Purchase Order from Material Master Price
Hi All,
Can I customise the system in such a way without any development in which I want that while creating PO the system should take the Price from Material Master if no Info record is maintained.
Thanks,
LekhramIf you are using the requisition to create the PO then it is possible other wise not.
If you use PR
the do the follosing setting in OMET trasnction, select the adopt PO price
the go to SU3 and enter the parameter id = EFB and value = Function authorization code (e.g 01)
now when you create the PR
on valuation tab you can see the field PO price
select the price as gross or net price
this will copy the Mateiral price (PR price) to the PO -
Account assignment group is different in Intercompany Billing from Material Master
Hello,
Account assignment group is different in Intercompany Billing from Material Master.
Account assignment group in Billing and Intercompany Billing is feched from Material Master.
In Material Master, account assignment group is assigned as 12.
In Billing, account assignment group is 12 but in Intercompany Billing, account assignment group is 13.
Please help me to understand why in Intercompany Billing, account assignment group is 13.
Best Regards,
Debashri DuttaCheck the table MVKE for the values maintained for field KTGRM. You can see the sales org-DC combinations for which the AAG is maintained as 13 for this material. This may give you clues for investigation.
-
Printing long text from material master in from MM07ET
Hello,
I'm using WEE1 output condition to print labels for gr. I'm using the standard object MM07ET and I need to include in the label the long text from material master - table STXL. I know that there is a function READ-TEXT in ABAP for this but I don't have access to abap development. I need to know if it's possible to include a command in the sap scrip to retrive the long text without modifing the program SAPM07DR.
Thank you!Hi,
Sorry for the late Reply, Please use the following code in SAPSCRIPT
/: INCLUDE &EKPO-EMATN& OBJECT MATERIAL IDGRUN LANGUAGE EN
&EKPO-EMATN& material Number ( Here please maintain the Field value which is used to print Material Number )
MATERIAL is the Object Name
GRUN Is Text ID
EN Language
You can use the above code for priting long text in the SAPSCRIPT FORM. to find the object name and ID please follow the below Steps
Go to the window were you have maintained Long text... Double click on the text, then it will open a new window.. there Click on the top Goto-->Header.. here you will find the relevant data as follows:
Language: EN
Text ID : GRUN
Text Object: MATERIAL
Name: Material Code
Regards
GK.
Maybe you are looking for
-
How do I import several layers from one Illustrator file into another Illustrator file?
Hi! I have ten Illustrator documents with appr. 100 layers in each document. Each layer in all documents are named correctly for automatic script exporting to PNG files. Now I want to import all layers from all ten documents into one master file. And
-
How can I get my e-mail address associated with Adobe Digital Editions?
How can I get my e-mail address associated with Adobe Digital Editions?
-
How to enable or install AutoSplit plugin in Adobe Acrobat XI Pro
How to enable AutoSplit or install plugin in Adobe Acrobat XI Pro
-
Edit/delete text in Preview
How do I edit/delete PDF text in Preview? I can get the handles around the text, but can do nothing with the text. Text is a note added within the original PDF (not at the margin).
-
Changing Colour of top level Navigation
Hi, I want to change the colour of the top level navigation. By default, the top level navigation shows two colour, sky blue and white at the bottom part. Our requirement is to change the white colour at the bottom part, so that it displays sky blue