In spool 2 pages shows when i take print

Hi Experts,
I have created sap script for payment print prog and for that i use standard prog RFFOUS_C. everything is fine, but when i take print this check printing so it comes 2 pages, and in spool also shows 2 pages, in second page some additional information comes with garbaje value. so what i change in variant..... of prog RFFOUS_C.
can you help me.. its urgent..
Thanks
Vishal

Hi Pawan,
Thanks for reply.
this I tried already, you know pawan i have no problem in development server, in dev server working fine, it takes only one page, same working fine in QA server also but in production server i got this problem it takes 2 pages, second page some garbaje value comes and same variant i use in production server also . so is there problem in printer configuration? or anything else?? if problem in printer so what should i change in printer configuration?
waiting for ur reply
Thanks
Vishal

Similar Messages

Blank page showing when changing from two column to one column pages

This is the scenario:
Document with two master pages - Page1 has two content areas - left column and right column, Page 2 has one content area the full page width named 'FullPage'
One page set named PageSetOne - with multiple subforms, each with Pagination setting of Following Previous and Continue filling parent.
Second page set named PageSetTwo - this has a single subform with Pagination setting of place on Page2. The child subform has itself a subform with Pagination setting of Place in Content Area 'FullPage'.
     This page set is initially set to be Hidden.
Third page set named PageSetThree - this has a single subform with Pagination setting of place in Page 1 and a child subform with Pagination setting of Following Previous.
[Obviously I am simplifying names and content here].
The problem is this: when in design mode, there is a blank page showing at the end of the document whenever there are sufficient subforms in PageSetOne such that subforms are displayed in the right hand column.
When subforms are removed so that nothing is showing in the right hand column then the blank page goes away.
I have put a marker subform immediately after the last subform in PageSetThree and can see that the blank page is showing after this.
Also, the following problem:
     When in preview mode, the extra blank page at the end does not display (which is good)
     BUT if the hidden PageSetTwo is made to be visible AND there is content showing in the right hand column prior to it,
     THEN a blank page is displayed just before the newly displayed PageSetTwo page (a single column page on Master page Page2).
I have tried every combination of Pagination Place before and after settings and can find no way to avoid the blank pages.
Does anyone have a clue as to what is going on and how I can avoid these blanks showing up?

I have finally managed to solve this problem.
The issue was not a subform extending too far out, it was a pagination setting, as Niall suggested.
I created a blank document to analyse the issue closely, and lo, my new blank doc with all default settings, worked perfectly.
So I revisited my forms and compared the pagination settings subform by subform.
This is what I had to change to ensure that all pages flowed with no extras:
PageSetOne (which is supposed to show using the two column master)
set the top page Place = ‘In Content Area Leftcolumn’ and After=Continue filling parent
All child subforms each with Pagination setting of Following Previous and Continue filling parent.
PageSetTwo (to show in the full page column Master)
set the top page Place = ‘In Content Area FullPage’ and After=Continue filling parent
All child subforms each with Pagination setting of Following Previous and Continue filling parent.
PageSetThree ( back to two column master)
set the top page Place = ‘On Page1’ and After=Continue filling parent
All child subforms each with Pagination setting of Following Previous and Continue filling parent.
I discovered that the critical setting was for PageSetOne. The After setting needed to be Continue filling Parent
Once I had those settings in order then the form performed as required.
This has been a frustrating learning experience but at least ultimately successful.
AJ

Problem with page size when using redirected printer

I have a customer who connects to another customer's network via VPN, then logs into and RDS server running Server 2012.
This customer then opens an Excel file and tries to print it out to a printer that is local to her and of course shows as redirected when looking at Devices and Printers in her login on the RDS server.
The problem is that when going to File / Print on the Excel document, the page size is listed as Custom Size and if you try to select any other size from the list, it won't accept it and stays at custom size. If she selects another redirected local printer,
she can choose whatever page size she wants.
This is not selecting the paper size. She can change that on either redirected printer. So when she is trying to print an Excel file on legal size paper, the print comes out reduced as if it is trying to print on letter size paper even though legal size
paper is selected.
I hope my description is clear enough. If not, please let me know and I'll try to explain further. So I'm trying to find how to fix this one redirected printer (a Brother MFC-7860DW) so that she can change the page size so when the document prints it occupies
the full sheet of legal size paper.
Jonathan

Is there is a difference in printer driver for working and non-working redirected printers? If yes, can you match it?
Do you see the same behavior if you use Generic Text Only inbox driver?
Thanks
Hari Kumar --- Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights

Pages disappear when viewing and printing

On our Windows 7 Professional (Service Pack 1) 64-bit computer, using the Reader application directly (not through a browser), we have been frustrated with blank pages appearing while viewing and printing.
This happens in Adobe Reader 9.5.0, 9.5.3, and 11.0.06. (We had been experiencing these problems with 9.5.3, so uninstalled and installed 9.5.0, then updated to 11.0.06. Same problem appears in all versions, but now is exceptionally bad in 11.0.06.   At one time we had updated to Reader 10, but reverted to Reader 9 because Reader 10 would not center pages correctly when printed, especially when Fit to Page was used.)
When we open a file, pages initially display correctly. But when we begin to scroll back and forth from page to page, the page images start disappearing. When we print, pages may display correctly just before the print button is pressed, and then may disappear after pressing the print button. If it disappears before the print function has completed, blank pages are output.   If a multi page document, the first few pages may print correctly then blank pages.
Once a page goes blank while viewing or printing, it does not restore. One must close the PDF file and open it again.
We have over 200 documents of 30 to 50 pages each, which are printed on a frequent basis and then bound. It is extremely annoying and costly to have blank pages output when there should be info on the page.    We have been printing these documents for eight years. Two years ago started using a brand new Windows 7 computer for printing PDF files, but the blank page issue started surfacing about 6 to 9 months ago and is getting more frequent.

The system has 4GB of memory. The processor is Intel Core i5 - 2400.
As per your suggestion, I updated the driver for the integrated graphics
card (Intel Graphics HD 2000). The new driver is dated January 2014. The
old driver was dated June 2011.
I tried to replicate the blank pages situation, and none went blank.   Will
continue to test over the next week or so, but this looks very promising.
Many, many thanks, Pat!

How to suppress page header when group footer prints

I would like to suppress the page header on my report when a group footer prints. My group footer is going to be a bunch of legal mumbo jumbo and I'm going to have it do a page break before so it prints on it's own page. I do not want my page header info printing on this page.
Is there a way to do this? I am on Crystal XI. Thank you in advance.

I haven't tested this, but...
Formula @InGroupHeader:
WhilePrintingRecords;
BooleanVar InGroupFooter;
InGroupFooter = False;
Formula @InGroupFooter:
WhilePrintingRecords;
BooleanVar InGroupFooter;
InGroupFooter = True;
PageHeader.Suppress:
WhilePrintingRecords;
BooleanVar InGroupFooter;
InGroupFooter;
Edit: I think I like Graham's solution better, actually.
Edited by: Garrett Fitzgerald on Jun 15, 2009 12:12 PM

No topic pages show when clicking on search list items

After generating WebHelp (Using Robohelp HTML 7) - using
search generates a list for a search term but upon clicking any of
the items on the list nothing happens - the topic page stays
totally blank - having spent ours on this I would appreciate any
suggestions

Hi,
This may be a resolved topic, but I found it today when
searching for a solution to the same problem. In my case the
problem was not caused by (and not solved by) the Mark of the Web
checkbox: instead, it was, I believe, an apostrophe in a directory
name in the path to the output files. I moved the files to another
network location that did not have the apostrophe in the directory
name and the search results linked correctly.
If the problem was a directory name, I'm surprised that
everything but the search feature worked okay, then again I've
heard that bad characters can have unpredictable effects.
Before anyone scolds me for bad folder naming habits, it
wasn't me. It's a network drive named by someone else and shared by
the writers. I avoid any punctuation in file and folder names other
than hyphens and underscores.
Regards,
Tom

No Pages Selected When trying to Print

I am using Adobe Reader XI and Windows 7. When I try to print a pdf I get "No Pages Selected". I have updated everything, tried to print as an image and I do not have the option to "enable protected mode". I was printing fine until a reader update. I need to print PDFs. How can I do this.

First thing to try: disable Protected Mode [Edit | Preferences | Security (Enhanced)].
Someone solved the same problem this way. If that doesn't resolve it, tell us your operating system and Reader version.

Attachments not showing when email message printed

I recently sent an e-mail with 11 attachments. When I printed that e-mail message, it did not show the 11 attachments in the body of message as has previously. Any suggestions?

Fixed it on my machine! Found the solution via an similar problem people were having in the Aperature program.
SEE HERE:
http://aperture.maccreate.com/2011/08/25/aperture-3-will-not-play-videos-if-lion -is-installed-and-3ivx-video-codec-is-installed/
I did a spotlight search for 3ivx on my computer and it found an 3ivx UNINSTALLER.
After uninstalling 3ivx and restarting - MOV VIDEO files worked again in my Apple Mail client.
I wasted 2 weekends of clean installs etc etc. Glad it's ficed though.

Files render, but adjustments don't show when exported or printed

Hello all,
Running Lightroom 2.2 on Mac OS 10.4
I'm experiencing some very odd behavior from a few files (originally NEFs converted to DNG; all from the same shoot/card). I am able to render adjustments in the Develop module but then two very odd things happen.
First, when I zoom to 1:1 preview the rendered changes do not appear; the file reverts to it's original state.
Secondly, and most importantly, when I export the files as a jpeg (whether from the Library, Develop, or Print module) the rendered changes do not appear and the file reverts to its original state. Again, same issue if I try to print the file -- the adjustments don't come through.
To further the mystery, this is only happening to a few files and I am able to manipulate the others and export them just fine. FURTHERMORE, when I open the same files on another computer that's running LR 1.4, I am able to edit and render the files AND see the changes upon export.
Any ideas?
Thank you in advance.
John

Duplicate the files in another folder, import them with 'do not import
duplicates' turned off in the import dialog, or import them into a
'test' catalog and see if they'll work. That'll narrow down whether
it's possibly a catalog glitch, and therefore how to solve it.

Pages hangs when trying to print

Since a few days it isn't possible to print any new document with pages (OS 10.4.11). Opening and printing older documents still works. And there also no problems with printing using other applications. Very frustrating!
Any hints?
Thank you very much in advance!

Being an old Quark XPress hand I can only suggest the techniques I used on bad Quark documents.
Look for suspects. Change something. Clean up. Transfer. Simplify.
What is different in the bad document? Remove and/or reimport graphics one by one. See if that changes anything.
Push some text up or down over page breaks. Sometimes the problem lies in the "Edges" of the postscript ie the page limits or some buried and invisible formatting.
Do a search and replace on multiple spaces etc in the text, clean up what you can by copying the text from the document and running it through TextSoap to get rid of stray formatting or invisible characters.
Create a brand new document with the same layout, copy the content out of the damaged file and paste it into the new file.
Last but not least. Try and simplify the document, reduce any special effects, fancy outlines, drop shadows etc.
If everything new fails to print, then there is a problem with Pages itself. Trash iWork along with all its preferences and reinstall from scratch along with upgrades.
Without seeing the job that's all I can offer.

Pages Crashes when trying to print to network printer

Everytime I try to print from my Intel iMac to a network printer (HP Deskjet 5550) hooked up to a dual 1.8 G5 Power mac, the program crashes. Does anybody know what to do in this situation?
Cheers,
Oren
iMac Intel Mac OS X (10.4.7)

What format of graphics are you using? Some have complained that tiffs are causing problems in their docs.
Hold down the option key and drag the file to create a copy. Remove all graphics and see if the doc prints. If it does then one of your graphics may be corrupt. If they are try opening the graphics with Preview and save them as jpegs. Put them back in the doc and then see if the file prints.
Kurt

How to force print page breaks (line feeds) in printed documents

setup:
Illustrator CS4
Windows 7
I've created a longish document of various pieces of text in 2 diffeent fonts. No graphics.
Can I insert linefeeds into the document where I want page breaks when it is printed? If so, what is the technique.
I come from linux/unix background where one can insert a Ctrl+L (line feed) to cause the printer to start a new page
at that point.
I got many hits on a search of this forum on `line feed' but those I browsed didn't really get to the question I'm asking.
Its a little confusing too because it appears from some of the hits that a line feed is different on windows and even does
something different.
Or if that isn't the right approach, how can I make the long document print out in some sensible way?
I'm using a common inkjet printer (epson R800)

Can I insert linefeeds into the documentwhere I want page breaks when it is printed? If so, what is the technique.
This is why I mentioned art boards. A new line or line feed is created when you hit the enter or return key. (I mention both keys as i do not know whether you have a mac or PC though I am leaning to pc since you mention linux/unix.
You should find the folowing link will tell you everything you need to know about artboards.
http://help.adobe.com/en_US/Illustrator/14.0/WS0939CFEE-49EF-4c6f-B337-8897EC89DF89.html

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You may also need to remove the cookies from that website.<br />
* Tools > Options > Privacy > Cookies: "Show Cookies"

Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open. Randomly freezes and becomes unrespo

Problem description:
(MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open. Randomly freezes and becomes unresponsive, requiring forced power down. Randomly logs off. Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access. Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed. Currently 169.99 GB available of 249.2 GB capacity.
Help?
EtreCheck version: 2.1.8 (121)
Report generated March 21, 2015 at 11:35:35 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Late 2008) (Technical Specifications)
    MacBook Pro - model: MacBookPro5,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM Upgradeable
        BANK 0/DIMM0
            1 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            1 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 59
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1440 x 900
    NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
Disk Information: ℹ️
    Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS21N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.kodak.BonjourAgent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
    Google Earth Web Plug-in: Version: 6.0 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    Disconnect
    Add To Amazon Wish List
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    Tuxera NTFS [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
    Destinations:
        Backup [Local]
        Total size: 63.67 GB
        Total number of backups: 1
        Oldest backup: 2015-02-23 16:16:08 +0000
        Last backup: 2015-02-23 16:16:08 +0000
        Size of backup disk: Too small
            Backup size 63.67 GB < (Disk used 80.29 GB X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         1%    loginwindow
         0%    AppleSpell
         0%    SophosUIServer
         0%    SophosAntiVirus
Top Processes by Memory: ℹ️
    118 MB    InterCheck
    101 MB    SophosScanD
    60 MB    Dropbox
    54 MB    mds_stores
    41 MB    SophosAntiVirus
Virtual Memory Information: ℹ️
    49 MB    Free RAM
    682 MB    Active RAM
    652 MB    Inactive RAM
    315 MB    Wired RAM
    1.49 GB    Page-ins
    2 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 21, 2015, 11:18:52 AM    Self test - passed
    Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
    Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

Linc Davis wrote:
Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB RAM installed. The Etrecheck report can be very informative if one takes the time to examine it.
Ciao.

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
    System Preference > Network > Advanced > Proxies Tab
    Under "Select Protocol", uncheck any box if selected.
    Click "OK" then "Apply”.

In spool 2 pages shows when i take print

Similar Messages

Maybe you are looking for