In sprintf iam not getting correct value
char msg[256];
unsigned short int tempp8=0xffff;
sprintf (msg, "Checksum: %u ",tempp8);
WriteLine (iFile, msg, -1);
while run the program the msg value get wrong data
msg=34085812
Just tried your code and if works as expected on a Win7 machine with CVI2012SP1.
Which system are you running it on? Which CVI release are you using?
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Similar Messages
-
BI Query with Hierarchy in VC does not get correct values
Hello Gurus,
I am building a model in VC for Performance Score card using Query as data service.
I have the following problem.
When I execute query in BEx with Hierachy_node variable , it is getting correct values, but the same is getting incorrect values in VC.
The Hierarcynode variable I am using is a TOP node, then the values including child nodes are also should be displayed, which is working fine with BEx query but not in VC.
When I execute the query with hierarchy node value as child node I am getting correct values both in VC and in BEx.
The correct values are not shown only when I use top nodes.
Please help me in this regard.
Thanks in advance
GaneshHi
We are facing the same issue. Is this issue resolved? Pls let us know the solution
Regards
Aruna -
Not getting correct values in ODS
BW gurus
when i do delta loads for ODS i am getting strange values into my ods.How ever if i do full loads on ods ,i am getting correct values(same values as RSA3).
1 .Any idea why i am getting wrong values if i do delta loads .
2.If i make this ods as full load(currently delta) ,there are already few reports on this ods ,Will there be any effect on those reports?Riccardo,Tony
Thanks for your quick reply.
I have in ods as follows
Asset fisper qty
1 006.2006 2
1 007.2006 3
Now i have added 2 more assets to period 6
in RSA3 is ok as follows
Asset fisper qty
1 006.2006 4
1 007.2006 3
In ods with delta load is not ok as follows
Asset fisper qty
1 006.2006 9
1 007.2006 3
In ods with full load is OK as follows
Asset fisper qty
1 006.2006 4
1 007.2006 3
any advice greatly appreciated -
Iam not getting the data on screen after using the user exit zxpadu01
Dear Freinds
As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.Hi Pranesh,
i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti. -
NSV w/RT FIFO Read does not return correct value
I have a cRIO which is hosting a NSV w/ RT FIFO enabled. I can observe its value in the DSM.
I have a LabVIEW exe that reads this NSV with a SV node on the diagram. This read value is incorrect.
If a run the same vi from the development environment then the correct value is read. If I remove the RT FIFO option then
the exe version will work correctly. According to the NI SV white paper, each reader of a NSV w RT FIFO recieves its own
client side buffer so there should not be any interference. It should be mentioned that I am also creating a SV reference to this same NSV on the cRIO
for read only use.Hello,
Have you tried using a Network Published shared variable to communicate between the host and target? This architecture would use a Network Published Shared Variable in a normal priority loop to pass data to a Single Process RT FIFO enabled shared variable on the target to move data to the time critical loop. Is the cRIO that you are accessing the only one present on the network? Also,. if you slow down your loop speeds, do you get correct values?
-Zach
Certified LabVIEW Developer -
Iam not getting output for inner join where condition
the condition i have give
TYPES:BEGIN OF TY_TAB,
WERKS TYPE WERKS_D,
LGORT TYPE LGORT_D,
LGOBE TYPE LGOBE,
NAME1 TYPE NAME1,
END OF TY_TAB.
DATA WA_TAB TYPE TY_TAB.
DATA IT_TAB TYPE TABLE OF TY_TAB.
SELECT T001L~WERKS
T001L~LGORT
T001L~LGOBE
T001W~NAME1
INTO TABLE IT_TAB FROM T001L INNER JOIN T001W ON T001LWERKS = T001WWERKS
WHERE T001L~WERKS = 'amjt' and
T001L~WERKS = 'bimi' and
T001L~WERKS = 'biml'.
LOOP AT IT_TAB INTO WA_TAB.
WRITE: / WA_TAB-WERKS,WA_TAB-LGORT,WA_TAB-LGOBE,WA_TAB-NAME1.
ENDLOOP.
iam not getting output for thisWell, re-read carefully your code
WHERE T001L~WERKS = 'amjt' and
T001L~WERKS = 'bimi' and
T001L~WERKS = 'biml'
- WERKS cannot be simultaneously equal to three different values, replace AND with OR ([Boolean algebra|http://en.wikipedia.org/wiki/Boolean_algebra])
- WERKS domain does not allow lowercase, so use uppercase ([Creating Domains|http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21edf2446011d189700000e8322d00/frameset.htm])
Regards,
Raymond -
Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help
iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
still not getting this options please help
Thanks
Koushik13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013. -
Not getting field value in Input field of field exit
Hi all
I am using field exit for data element GWLDT in transaction code IE02. But in this field exit I am not getting the value entered in the field "Begin guarantee date(GWLDT)" in the INPUT field of field exit.How I can get the value in the INPUT field of field exit?
Regards
DeepakUse this statement in source code.
output = input. -
JPA Error:Could not get a value to be injected from the factory
HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra DasariHI Isaias Cristiano Barroso,
There are lot of enries most of them pertaining to properties set to yes or no.
out of which therre are tow errors. the log is as follows
Message Info: Failed (javax.management.MBeanPermission,#[:j2eeType=trace,name=EndToEndCentralMBean,],isActive,getGuidByName,getTraceLevelByName,getTraceLevelByName,importTrace,isFileExistsLocally,removeTraceFile)java.lang.reflect.InvocationTargetException
Failed (javax.management.MBeanPermission,*,DISPLAY)java.lang.reflect.InvocationTargetException
category: com.sap.security.core.role.PermissionData
Location:com.sap.security.core.role.PermissionData.get(ClassLoader)
Frankly the above log is above my understanding ,Prob it may help to you undertand my the issue
Thanks once again -
Iam getting problem with Jfilechooser iam not getting networkneighbourhood
Dear Sir,
Iam doing a product for education portal for that we are using swing as frontend in that we are using Jfilechooser where ever we want but the problem is in filechooser iam getting the directories of the system(like C, D, E). But iam not getting the networkneighbourhood in that. Please any body can solve my problem i want to select networkneighbouhood. Ill be waiting for your reply.If apiece of code is there ill be very thankful.
regards
suryaUnfortunately can't be done with JFileChooser, you would have to write your own version.
See the bottom of this document
http://java.sun.com/products/jfc/tsc/articles/merlin/windows/index.html
Unfortunately the link that the text then leads you on to is broken. -
JAPEXample01 published in sdn:error Could not get a value to be injected
HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra Dasari.HI Pritya Ranjan,
Let me know the entities and their relations ships you are using for quicker response.
To know the proper error, use the path as mentioned
nwa->problem management ->logs & traces->locks.
Email the error code,
The issue might be because of some many probabilities mentioned below.
Point no 1
Are you using Named queries : If so check the queries syntax, the syntax used here is different from regulat sql queries.
Point no 2:
Are you using Java DIctionary or generic db and connecting to max db?
check this part also
Point no 3:
Check your connection profile parameters:
Point no 4 :
Check the data-source-alias,persistence.xml and data-source.xml parameters..
Beacuse i trouble shooted a lot on JPA's and found why the typical error's occurs.
Regards
chandra dasari -
Not getting correct Tax calculation - due to "Ship to party region code"
When we are making Sales order using (UTXJ cond.)
Origin Country----
IN
Delivering Plant Region----
24
Ship To Party region----
24 (maintained in customer 1 address)
Tax Classification Customer------J
Tax Classification Material----
1
We are getting correct Tax calculation for tax code AD (4% + 1%)
But when we are using
Origin Country----
IN
Delivering Plant Region -
24
Ship To Party region----
06 (maintained for customer 2 address)
Tax Classification Customer------ J
Tax Classification Material----
1
We are not getting correct Tax calculation for same tax code AD (4 %( JIN2) + 1 %( ZIN2)). Instead we are getting only 1%..difference in tax codes used for sales purpose is just the fact that Ship to party region is different.
Ship To Party region----
24 (up)
Ship To Party region----
06 (Bihar)
For 06 it is not calculating correct values -
Can someone please help me! iam trying from morning iam not getting it plz
hi all,
i am having some problem accesing parameter passed from tiles-def into my jsp, using jstl.
here is the code.
tiles-defs.xml
<definition name="tabTest" path="/tabDisplay.htm">
<put name="configurator" value="TabLayoutConfiguratorImpl"/>
<put name="viewMapping" value="first.htm"/>
<put name="selectedParameter" value="selectedIndex" />
<put name="anchorName" value="" />
<put name="selectedIndex" value="0"/>
</definition>
tabsLayout2.jsp
<tiles:useAttribute id="selectedParameter" name="selectedParameter" classname="java.lang.String"/>
<tiles:useAttribute name="selectedIndex" ignore="true" classname="java.lang.String"/>
<tiles:useAttribute name="tabList" classname="java.util.List"/>
<tiles:useAttribute name="viewMapping" classname="java.lang.String"/>
<c:set var="indexAsString">
<c:out value="${selectedParameter}"/>
</c:set>
<c:set var="indexAsString" value="${selectedParameter}"/>
<% System.out.println(" indexAsString= "+ pageContext.getAttribute("indexAsString"));%>
<% System.out.println("2. selectedParameter= "+ pageContext.getAttribute("selectedParameter.value"));%>
output in tomcat
selectedParameter= null
1 indexAsString= ${selectedParameter}
2 indexAsString= ${selectedParameter}
i need to take selectedParameter value which is selectedIndex it interns takes value 0 and should return and assign to indexAsString.
but why is it printing complete string as it is like in value="${-----}"
does anybody know the answer please help me
i tried to put pageScope, requestScope also and tried it its just not getting the value inside of it.What version of Tomcat are you using?
What version of JSTL?
Please show the taglib imports from your JSP page. -
I can not get link-value from af:tree.
Hello.
I use jdeveloper 10g.
I can not get link-value from tree.
I use following code:
<f:facet name="nodeStamp">
<h:panelGroup binding="#{backing_dialogDic_dic_ETS.panelGroup1}"
id="panelGroup1">
<h:outputText value="#{item.vidNum} #{item.vidName}"
binding="#{backing_dialogDic_dic_ETS.outputText1}"
id="outputText1"/>
<af:commandLink
binding="#{backing_dialogDic_dic_ETS.commandLink2}"
id="commandLink2"
action="#{backing_dialogDic_dic_ETS.returnObject}">
<af:setActionListener from="#{item.idVid}"
to="#{processScope.ETSId}"/>
<af:objectImage source="/images/icons/10.gif"
shortDesc="Выбрать"
binding="#{backing_dialogDic_dic_ETS.objectImage2}"
id="objectImage2"/>
</af:commandLink>
</h:panelGroup>
</f:facet>
</af:tree>
//in java bean:
public String return_Object() {
Object ob = JSFUtils.getManagedBeanValue("processScope.ETSId");
System.out.println(o);
return null;
In console I see null.
How I get this value???
I can get this value if i use treeTable instead of tree.
Thx, Dema.Hi,
not that I think it matters, but the processScope is not a managed bean but a memory scope. So if
JSFUtils.getManagedBeanValue("processScope.ETSId");
assumes a managed bean then this may be incorrect as most likely there exist no managed bean with this name. You should be able to access the process scope from AdfFacesContext.getProcessScope(), which then returns a Map, which you call get("ETSId") on
Frank -
Object - MLST_NETW container not getting the values?
Hi,
I created a custom FM for the object - MLST_NETW and event STARTED
and in the workflow container I created Element for this object - by selecting Obect type - MLST_NETW
Now the problem is - When we do status change in tcode - CJ20N it is triggering the custom worklfow but in the worklfow container it is not getting any values. Container fields are empty. I need to get the project defination field value to the workflow.
Can any one tell me what could be wrong?
Thanks in advance.
M.Hi Murali,
Yes. Binding for event to workflow not defined.
For that, press Ctrl + F8 in the workflow template then it will take you to verision dependent tab. There you can find the start events tab.
Here only you entered the Business object and event. Right? So there one button is there for binding. CLick on it and check whether event to workflow binding has done or not.
Event container EVT_OBJTYPE should binded with your workflow business object.
Thanks.
Maybe you are looking for
-
Hi All, I have created a query on PNP logical database which looks very simple, Lets say it has pernr, first name, last name, and Mailing ZIP on the output. P0006-SUBTY = 'MAIL' Now, the problem is .... if someone do not have mailing address subtype
-
HT204053 how do i see documents in icloud
How do I setup Icloud to view documents. I checked it in the preferences box but do not see an icon nor know where to store documents in order to be seen
-
Converting PDF to EPUB with lots of images
Greetings everyone, I am rather new to indesign and e-publishing and trying to get a handle on how to do this properly. I am a professional photographer with years of work and have decided to create a few photo e-books. Not actually how to, but beaut
-
WAIT not exiting the Wait Node
Hi , My client has a requirement to hold the execution/suspend/block program for about 30 minutes upto 2hrs using Loop counter. I have used loopcounter with looplimit 4 times--> Wait(Waitmode-->Relative time, Relative time --> 0.001388 just to test i
-
I am using the RAID in a Windows enviroment, a few weeks ago we perceived some extrange behavior and decided to run the "Utils/Rebuild Pariy Data" and to my surprise the Raid admin reported "Initializing the RAID 1, 0%..." (the back up was 24 hours d