In-store end date for $200 iPhone trade?

Yesterday I spent over an hour on the phone calling local Verizon corporate stores and speaking with representatives from Verizon's customer support, telesales, and customer care lines. I have heard so many conflicting bits of information about this iPhone 6 trade promotion.
I do not want to send my phone through the mail. I have heard too many horror stories from people on these forums who sent in pristine, functioning phones that met all the criteria and had their $200 quote for their iPhone adjusted down to $36 because the appraisal indicated that the activation lock had not been removed, had some kind of physical damage that was not there when they placed the phone in the mailer, or that the phone would not "turn on" in spite of the fact that they had used that phone up to the very point that they activated their new phone and mailed off the old one.
So, I would much prefer to handle my trade in a Verizon Wireless Corporate store. I want to have my phone appraised in front of me so that I know I won't be left getting chump change for a perfectly good device.
I placed an order for an iPhone 6 Plus in a Verizon Wireless corporate store on 9/19 at 8:16 am. Because the store had received absolutely no stock of the iPhone 6 Plus in any color or capacity, I was forced to place an order to be shipped to my home and I was told that it should ship by 10/24. I was tired, and I was frustrated because I had waited in line for hours and none of the employees had the decency to tell any of the customers that they had never received the iPhone 6 Plus. I was also told at the time that I could trade in my old iPhone for $200 once I got my new device as long as it was within the dates of the promotion, and that Verizon would likely extend the dates of the promotion to accommodate the back-ordered phones. They told me to call back in a few days to find out if Verizon had extended the promotion
A few days later on 9/27, I called back and was told that Verizon had indeed extended the promotion but only through 10/15. They instructed me that if my phone was back-ordered, I should fill out the online form to receive a mailer that would allow me to ship my old phone in once I received the new device. Although I did not want to mail it, I filled out the form just in case. I am still waiting for prepaid packaging to arrive.
A few days ago I decided to check into these forums to see if any other customers had been having any trouble with this promotion. I was shocked to see a number of posters complaining that Verizon had received far less than the promised value after mailing in their old phone. I decided to call the store where I ordered my phone to express my concern and to see if I would be able to have device appraised in the store so that I could receive the $200 credit without having to take my chances with the mail-in route. The sales rep at my store told me that they absolutely would not take a trade-in unless I purchased a phone that they had in stock and made the transaction there, immediately. This is not what they told me 3 weeks ago. I asked if they had ever received any iPhone 6 Plus in the store since launch day. He said that to his knowledge, they had not. How am I supposed to purchase a device in the store that they have never even stocked?
I called customer service and spoke with a rep who was as confused as I was about this situation. She placed on my hold for a few minutes and then told me that as long as my device was purchased before 10/15 (which it was) I would be able to trade my old device in the store once I received my new phone. Just to verify, I called a second Verizon Wireless corporate store. The sales rep there told me that they would allow the trade in the store and would offer the $200 credit immediately, but only if I could do that before 10/15. After that date, he said that their system would only allow them to provide the normal appraised value of the phone.
Deflated and frustrated, I called Verizon customer support again. I explained my concerns and I was bounced from customer support, to telesales, to customer care, re-explaining this whole story each time. One of them even claimed to be absolutely certain that the date had been extended to 11/15 as stated in an email that she had received, although she wasn't sure why no one else had received this email.
Other people I've been speaking to have received even more conflicting information. Some insist that I need to have filled out the online form prior to 10/15 to do the trade in-store. Some say that as long as I have a proof of purchase dated before 9/30 I should be able to process the trade in a store. Some have even told me that I have up until 12/1 to do the trade.
I need to know, definitively, that when I receive my new phone around 10/24 that I can trade my old phone in at a corporate store for the full quoted $200 credit. I need a concrete answer.

Promo terms:
Purchase IPh6 - you've already started the purchase of the iph6. Once you receive iph6, activate it, then clean out your old one.
On or before 10/15/14, either trade in the old device at a VZW Retail store or submit the device trade-in online at trade-in.vzw.com. If trading online you have to return devices to VZW by 12/1/14

Similar Messages

  • TS4585 When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup

    When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup

    That usually means that there is something wrong with the backup and it cannot be used.  You can try restoring the backup again, but if you continue to get the same message all you can do is restore to a different backup, if you have one.

  • Start and End dates for users in Enterprise portal

    Hi Expert,
    I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

    Hello
    Please check below URL for User Import Format:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
    Regards,
    Tapan Goyal

  • How to Calculate End-Date for a given Startdate in business hours without holidays

    Hello Experts,
    I need to create a plsql function where we need to determine end date for a task. For this, input will be only start date & number of hours allocated for that task. Based on this input we need to exclude Business hours & need to include only Business hours. and in the end we need to achieve the end date after the hour addition to the start date.
    Example : INPUT: 03-OCT-2013 12:00:00 PM /
                                  Hours Allocated 30 Hrs.
    Business Hours - 11 AM to 9 PM.
    So time starts from or Startdate is Friday 03-OCT-2013 12:00:00 PM. 
    So If I want to calculate the end-date by adding 30 hours to it, it should come WednesDay 09-OCT-2013 12:00:00 PM because I excluded Weekends & considered only business hours that is 11 am to 9 pm.
    I am not able to get any such guidance in Internet as most of the docs are having start & end date as input.
    Please help!
    Thanks in advance !!

    Hi,
    As Christ said, there's no nuilt-in Oracle function to tell whether a given DATE is a holiday or not, partially because there's so much local variation in holidays.  You can write a function like that (see http://forums.oracle.com/forums/message.jspa?messageID=3351081 ), but creating a table will be simpler and more efficient.
    I suggest creating a row for every date, whether it's a work day or not; that way, you can have variations in the schedule (e.g., schedule changes and
    partial holidays).
    CREATE TABLE  work_calendar
    (   dt  DATE       PRIMARY KEY
                       CONSTRAINT  work_calendar_dt
                           CHECK (dt = TRUNC (dt))
    ,   day_type       VARCHAR2 (8)  NOT NULL
                       CONSTRAINT  work_calendar_day_type
                           CHECK ( day_type IN ( 'HOLIDAY'
                                               , 'WEEKEND'
                                               , 'WORK DAY'
    ,   start_time     DATE
    ,   end_time       DATE
    ,   work_hours     NUMBER
    ,   work_hours_since_1970     -- or some point earlier than you'll ever need
                       NUMBER
    ,   CONSTRAINT  work_calendar_start_time
            CHECK ( TRUNC (start_time) = dt)
    ,   CONSTRAINT  work_calendar_end_time
            CHECK ( TRUNC (end_time) = dt)
    This will let you do a lot of the calculations you need without a function.

  • How to set a default start and/or end date for New Events based on trigger date.

    I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
    However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
    I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
    At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
    Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
    1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
    2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
    Any thoughts or ideas?

    John,
    Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
    Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
    Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
    Works just fine. Snippet from the listener follows
    BindingContext bindingContext = BindingContext.getCurrent();+
    *if ( bindingContext != null )    {*+
    DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
    DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
    Row currentRow = iterator.getCurrentRow();+
    if ( currentRow.getAttribute("StartDate") == null)+
    currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
    if (currentRow.getAttribute("EndDate")==null)+
    currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
    *}*

  • Quarter End date for this period

    Hi
    I have current date, How could I get the quarter end date for this date.
    for example
    Jan 23 2005 - The quarter end date is Mar 31 2005.

    needs testing
    import java.util.Calendar;
    import java.text.SimpleDateFormat;
    class Testing
      public Testing()
        SimpleDateFormat sdf = new SimpleDateFormat("yyyy/MM/dd");
        Calendar cal = Calendar.getInstance();
        cal.add(Calendar.MONTH,3-(cal.get(Calendar.MONTH)%3));
        cal.set(Calendar.DAY_OF_MONTH,0);
        System.out.println(sdf.format(cal.getTime()));
        cal.set(2005,10,15);
        cal.add(Calendar.MONTH,3-(cal.get(Calendar.MONTH)%3));
        cal.set(Calendar.DAY_OF_MONTH,0);
        System.out.println(sdf.format(cal.getTime()));
      public static void main(String[] args){new Testing();}
    }

  • End date for support of Solaris 2.5.1

    Is there anywhere that the end date for patch support for 2.5.1 can be found? A link would be most appreciated.

    www.sunsolve.sun.com
    is the site where u will get all patch updates detail
    cheers
    Dhruva

  • Previous month end data for report

    Hi expert,
    I have to calculate previous month end data for my report.
    let say if user select 15 oct then he should be able to see 30 sept data.
    I have calander prompt.
    Thanks,

    Hi,
    Use presentation variable in date prompt.
    Apply sql filter(covert to sql) on report as date_column= TIMESTAMPADD(SQL_TSI_DAY,-DAYOFMONTH(date 'presntation_variable'),date 'presentation_variable')
    Refer : How to get LAST_DAY in obiee
    Regards,
    Srikanth

  • Are there any dates for an iPhone VoIP client for VoLTE, 700MHz, band 28 ?.

    Are there any dates for an iPhone VoIP client to run VoLTE, 700MHz, band 28 ?.

    Not that I'm aware of.

  • Urgent-change the end date for a existing wage type.

    Hi,
    Can u pls let us know how to change the end date for a existing wage type.
    The current end date is 30.8.2008  and we would like to change to 31.12.9999.
    Rgds,

    Use This report RPCLGV00
    The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator ‘A’ when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employee’s organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
    The wage type distribution offers you the following options for evaluation:
    Individual reporting for a specific personnel number or name.
    Totals evaluation without specifying a personnel number or name.
    You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
    Scope of Function
    You use the following parameters to determine how the appearance of the wage type statement:
    Wage type for evaluation
    Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
    Evaluation start date
    Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
    Evaluation end date
    This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

  • How to find table that store real data for field 'BETRG' ?

    1) datasource  0HR_PY_1 include field 'BETRG' in R/3 source system; extract structure HRMS_BIW_PY1 for datasource 0HR_PY_1, however structure is not used for stroing data. Question: how can we find table which store real data for the field  'BETRG'?
    2) If I want to add one type call department leader type which already defined in one enhanced HR table, to calculate the total amount using field 'BETRG'  according to department leader type. Should I enhance datasource  0HR_PY_1 by adding department leader type or create new view based on enhanced HR table and another table that include 'BETRG' data, also create new datasource based on this view later on?
    Thanks!

    Hi,
    Check this for Payroll Data (Transaction Data) 0HR_PY_1
    http://help.sap.com/saphelp_nw70/helpdata/EN/a5/94e8288eec11d4b2fb00010220c65f/frameset.htm
    The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables.
    thanks,
    JituK

  • OIM 11g r2 ps2. Setting end date for role requests

    Hi,
    reviewing the new features document on oim 11g r2 ps2: http://www.oracle.com/technetwork/middleware/id-mgmt/overview/oim-11gr2-whats-new-1709505.pdf
    it says "For example, in a request that involves multiple entitlements, the requester might be required to specify the start date and end date for each of the entitlements requested. OIM enables requesters to provide such information during request that can be carried all the way to approval and provisioning processes. OIM also provides an out-of-the-box scheduled task for entitlement grant and revoke based on the start and end dates specified"
    I've been searching on the documentation and doing tests on a virtual environment before a poc to a customer and can not find how to use that feature.
    Is it an OotB feature or it needs codification and extra configuration?
    Any tips on how to achieve this?
    Thanks in advance!

    Doc links:
    http://docs.oracle.com/cd/E40329_01/admin.1112/e27149/appinstance.htm#OMADM5296
    http://docs.oracle.com/cd/E40329_01/admin.1112/e27149/scheduler.htm#OMADM743, tasks "Sunrise of Accounts and entitlements" and "Sunset of Accounts and entitlements".
    Oracle Support Document 1951854.1 (Sunrise And Sunset Of Entitlements) can be found at: https://support.oracle.com/epmos/faces/DocumentDisplay?id=1951854.1
    Joost

  • Do I have to have cellular data for an iPhone or can I not have it

    Do I have to have cellular data for an iPhone or can I not have it?

    Ok thanks
    I was worried that I would go somewhere and they would say you did not purchase it here, so we can't set anything up. Iam going to wait until fall to purchase one (save up some more) I guess the ios 6 (is that the new one) will be on the ipads by then.

  • HT1222 Hi, what is the support end date for Quicktime 7.7.3?

    Hi, what is the support end date for Quicktime 7.7.3?

    Hi
    <b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
    BAPI_PO_GETRELINFO
    BAPI_PO_GETITEMSREL
    BAPI_PO_GETITEMSREL            List Purchase Orders for Release (Approval): New as of 4.0A     
    BAPI_PO_GETRELINFO             Display Detailed Release (Approval) Information on Purchase Order
    BAPI_PO_RELEASE                Release Purchase Orders            
    BAPI_PO_RESET_RELEASE          Cancel Release of Purchase Orders  
    <u>Related link -></u>
    Re: How to fetch data from back end for PO?
    Hope this will help.
    Do let me know.
    Regards
    - Atul

  • What is the support end date for Firefox version 19?

    I want to confirm the end date for support for version 19, is it February 2013?

    we are still helping users who are using firefox 19 and lower also.

Maybe you are looking for

  • Select query - timeout error

    hi experts, I have written a pgm where i need to select records from BSAD table. This table has about 10 key fields. But according to my requirement, i can pass only 2 key fields to the table and have to fetch records from this table.  But it goes to

  • Does I photo duplicate images when added to more than one album?

    I am trying to eliminate duplicates in IPhoto.  Is each image duplicated if addes to more than one album?

  • Pass control to end of selection

    hi all.. in a certain consition i want control to be pass to END-OF-SELECTION. it is working with STOP but on compiling warning message 'Obsolete Statement ' comes. IS there any alternative. Message was edited by: sharadha sharma

  • Moving data type with imp/exp

    i used this line in one database: create or replace type sagi_row as object ( ids varchar2 (250) str varchar2 (250)); create or replace type sagi_srray os table or sagi_row; it work and i can use it. i duplicate the database by simple defaul exp and

  • Signature error in Module msvcr80.dll

    Using PSE 7 under Windows Xp Service Pack 3. I was using the Editor and then decided to try the Demo of Elemenst+. On reopening the Editor I got a Signature error in Module msvcr80.dll version 8.0.50727.4053. As I also have PSE 5 on my system, which