In subcontracting process same material to come back from vendor how?

hi
in subcontracting process i want to send x material for processing purpose and same material is going to come back tell me the process how can i do
chandra

hii
For ur scenario, u have carried out external service management process.
Because , subcontracting is nothing but , u have to X material and receivea as A materia or some different material.
SO if u r going to receive the same material , u can do it as service process.
Thanks
SAP-MM

Similar Messages

My iPhone 4s 64gb was freezing so I went to rest menu and pressed the reset all settings it says you will not erase media and data but I have lost all my photos these are not backed up as I just come back from holiday how can I find them?

I have iCloud but these pics are not there, why did it erase them?

The photos could/most likely ARE still in photostream. I just did this with my ipad yesterday.
Log onto iCloud from a desktop in iPhoto and see if they alreaady synced over photostream first.

Satellite U400 wont turn on & when on wont come back from sleep mode

I have a Satellite U400 and its a year and a few months old.
In the last little bit it has been acting up, and it started with when the computer goes to sleep and goes to the black blank screen it will not come back from that.
The only way to do anything is hold in the power key till it turns off and then turning it back on. This brings me to the warning screen I have turned my computer off incorrectly. It has been doings this for a few weeks and started randomly out of the blue.
Then just today it wouldnt turn on at all, I was pressing the power key and the key itself would light up, and on the bottom right hand side the little lights would light up but wouldnt turn on, I kept pressing it over and over and over again and finally it did turn on. Once on I only used it for a few mins before turning off again and then would do the same thing, I kept pressing the bottom till it turned on. Its been on now and hasnt turned off again.
Not to log ago I had to reformat my computer due to me forgeting my password and had locked myself out of the computer. About a week after that is when the issues started. I am not all that computer smart, to be honest, I do understand something things, I can follow step by step to do something.
I really dont want to pay to have it fix I want to just do it myself and soon as its in great shape and never had any issues before.
Does anyone have any idea what this could be, or why it could be?
I am thinking about reformatting again as I am worried that didnt work out right the 1st time or something.
Or if this is something that needs to be repaired does anyone have a clue on the cost of it?
Thanks ^_^

hi aev270,
sounds like a serious problem to me.
try the following: take out battery, cd-rom, hdd and try again.
if it starts up without this components - you got lucky!
this means it probably a software issue (but i dont think so - sorry)
do you see the toshiba logo / bios messages? no - the you are in trouble.
this strange behaviour could depend on many things: defektive components like ram or grafics... or (badest thing) the mainboard...
if you have still warranty on it you should go to a servicepartner having the system checked.

Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

# of tab canvases dependant on the # of groups that come back from a query

Hi,
I'm trying to create a dynamic creation of blocks, and tab canvases dependant on the number of groups that come back from a query. If 4 groups come back then I desire 4 tabs with the appropriate data in each tab.

Basically Forms is not intended to build screens programmatically but it is possible to kluj it. Here's what you could do.
Create a form with (say) four tabbed canvases, enough to fill the display. Each canvas has its own block. Then you have video style buttons - Fwd, Bk, FFwd FBk - and just scroll the blocks across when the user clicks the button.
Did you enjoy the use of the word "just"? Sounds easy, doesn't it? In practice, what you need is an array that ties the filter criteria to the canvas number. Then you shuffle the canvases by applying the appropriate WHERE clause using SET_BLOCK_PROPERTY and then executing a query.
The problems with this are obvious and the same as any dynamically generated UI. It will perform badly (each navigation to a canvas will trigger a fresh query, plus there's the overhead of managing the stack). Also it is fragile: there's lots that can go wrong.
So you need to ask yourself what it is you are hoping to achieve. Can you deliver the same business function some other way? As another poster has pointed out, this is just a glorified master-detail form - the filter criterion being the master. Building this as a classic two block master-detail Form is more straightforward and more robust.
Regards, APC

I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?

I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?
Also where exactly on the laptop is teh data stored.
Thank you!!

go to 'Edit' in the menu bar. Then choose 'Preferences'.
you'll see a pop-up and there's a tab called 'Devices' there. If you click that, you will be able to check a box that says 'prevent automatic syncing for iPods, iPads and iPhones' or something like that.
Hope this helps
NB: if you don't even see the menu bar that has options like 'File, Edit, View, etc', first click the black/white square button on the top left of your screen, and then click 'show menu bar'. It should pop right up.
Good luck

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

banannaphone,
Welcome to Apple Discussions.
Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

Problem to come back from sleep mode in Lenovo Thinkpad T400 using Windows XP

Problem to come back from sleep mode in Lenovo Thinkpad T400 using Windows XP. Each time closing the T400 lid and try to make the laptop into a sleep mode for some time, it does not properly come out of sleep mode. Login screen is able to see when opening the lid for the first time, but it only seen for a while before then a black screen on T400 Thinkpad appears. Sometime the hard drive activity can be shown also. And then, to come back I had only one option to hard re-boot.
I tried Fn+F4 and power button once to come back but no use.
Please provide me some solution for this?
Thanks in Advance.

oh sorry and its been closed inbetween uses. When i open it the keyboard doesn't light up and it makes no sound.

Hey my air's screen is mess when it comes back from sleep. It is full of horizontal colorful lines. However, it becomes ok when I restart it. What's wrong with it?

Hey my air's screen is mess when it comes back from sleep. It is full of horizontal colorful lines. However, it becomes ok when I restart it. What's wrong with it?

Resetting PRAM may help.
Reset PRAM. http://support.apple.com/kb/PH4405

My Outlook prompts for password every time it comes back from sleep or started

I've Microsot Outlook for MAC 2011, version 14.4.1 installed on my MAC Book Pro Retina Display with OS X Version 10.9.2 and everytime my outlook comes back from sleep or is started or there is a little fluctuation in Wifi signals, prompts me for my email password. I checked the option of save my passord, deleted all previous passwords from Keychain but it doesn't works, so please help. My email at my official domain (not free domains) address is configured perfectly and my send and received is working fine.

I have that problem in Outlook, too. When I get the Yes/No dialog box, I simply click "No" and my machine continues to receive mail.
It's most certainly a pain, but coming out of sleep, your network doesn't kick in for a minute or two. I don't think that it's really a bug in either OS X or Outlook: it just takes that minute or so for the network to wake up.
Clinton

I have just come back from holiday and started my mac up and I have a white spot next to my Finder, Safari and Mail? why?

I have just come back from holiday and started my mac up and I have a white spot next to my Finder, Safari and Mail? why?

Are you talking about the indicator for open applications?
If you're on Lion, it just reopened apps that where open when you shut it down.
Regards,
Captfred

UPDATING OSX MOUNTAIN LION ADOBE VIEWER. recently received e-bill statement. could not view. site recommended updating adobe viewer. as this feature comes OEM from Apple, how is this accomplished?

UPDATING OSX MOUNTAIN LION ADOBE VIEWER. recently received e-bill statement. could not view. site recommended updating adobe viewer. as this feature comes OEM from Apple, how is this accomplished? Note, this was an online view for the PDF document.

Thanks for your help. Final question. So I am assuming that PDF funcitonality is accomplished via Preview. I assume then that the PDF creation in Mail is also similarly accomplished, that is not via an Adobe product, but equivalent funcitonality. I see now that I can download Adobe. But, does the Apple PDF equivlant provide updates to keep up witht the new encoding structures released by Adobe, so that I can only update the Apple equivalent, or is this not practical because Apple would be chasing Adobe for software updates?

Subcontracting - Material temporarily comes back into Own Stock

Hello all,
My client has the following business process:
Raw Material is sent to the SC vendor for processing. SC Vendor does some processing and brings it back to the plant, say as SFG-1, for the partly processed material to be put to temperature treatment.
The SFG-1 that was brought in for treatment is taken back to SC Vendor's place as SFG-2. SC Vendor does further processing and provides the FG.
From my understanding, this is achievable using 2 Subcontracting POs and a Production Order for the temperature treatment. However, the client doesnot wish to break up the SC order and have it as one order, and at the same time, capture temperature treatment cost.
Request your suggestions on how to handle the situation. Thanks in advance.
// Santosh

Could you not have One PO, for which you do 541 and bring the partially processed material (provided it is the same material number) using 542 to a different storage location (created for temp treatment) and then again do 541 to send this material back. This way you will be able to handle the entire operation with just 1 subcon PO and also be able to track the material movement to and from the subcon vendor.

Subcontracting process where Material Supplied by vendor

Hello Gurus,
If anyone can provide me input how to map subcontracting scenario with subcontracting challan where some material is also added by vendor(Which is unknown at the time of raising purchase order).
This additional componenet also attracts excise so how to take credit on top of this.
I am mentioning what i am doing for this process and what issue i am getting
1. I am sending component A for conversion from subcontracting vendor and receiving Z.For this i created one Subcon PO, transferred material A then created subcontracting challan.
2. Now vendor is adding his material B.This part i am handling by inserting this material B in components of A(FG) by amending PO.In the same PO i maintained vendor supplied material as separate line item and its delivery i selected as delivered directly at vendor site.
3. At the time of doing GR first i am making GR of vendor additional component(With capturing of excise invoice) then for the FG material with ref to subcontracting challan.
4.
4.Now when i am recociling sub con challan system is not considering the extra quantity (Recieved from Vendor) and system is not recognising and becuase of this i am not able to save the Challan
SO need your expertise help if i am following process wrong as mentioned above or shall i try some another way to process this cycle
Regard
VIvek

Create the BOM for Z (Finished)component (Raw component A)
Create the sub contracting PO for Z componet
Send A component through 541 with MB1B transaction
While receiving finished goods in MIGO there is a option (Non-Ordered Material)click this option add vendor added meterial (B) and receive along with finished goods.
You can settle the same when you crete the invoice.
Hope this would help.

Ipad shut down. Will not come back on. How do I get it back on?

My new Ipad shut down tonight and will not come back on. what do I do to get it back on?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

In subcontracting process same material to come back from vendor how?

Similar Messages

Maybe you are looking for