In SXI_monitor unable to see receiver

Hello Friends,
Regarding the Enhanced Receiver determination.
I am working on the below blog "Illustration of Enhanced Receiver Determination - SP16
I have done the design in IR as below
1) Created two data types (one input,one output)
2)Created respective Message types..
3)Created two Interfaces (one for the outbound ,one for Inbound)
4) a) Created message mapping from the input to SAP BAsis--> Receivers mesage type
b) Created message mapping from the input to output based on some logic(I prefered greater than logic here)
c) Created message mapping from the input to output based on some logic(I prefered less than logic here)
5) Created MI for the above three...
and in ID as below
1) created three different Business services and assigend input interface to one Business interface and the other output interface to the remaining two Business services.
2)Created three comunication channels and assigned to the above respective Business services.(Adapter :1 sender ,2 receiver File Adapters)
3)one Receiver determination (Extended)
4)two interface determination
5)One sender agreement
6)two reciever agreement.
I am getting error ....
in sxi_monitor its unable to find the receiver
what could be the reason ...Could any one guide me on this...

Hi Satya,
You can test your ID Configuration.
Go to Tools->Test Configuration in ID.
Give required information along with payload you are sending.
This will give you details where you have done mistake.
Thanks
Sunil Singh

Similar Messages

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to see pipe line steps in the SXMB_MONI

HI,
i have done the development and quality work for my p i7.1
i was testing the messages in the Quality System.
So i went to SXMB_MONI to see the messages.
After double clicking on the successfully processed message, it shows
pipe line steps.
in that I am able to see
1.inbound message(CENTRAL)
2.XML Validation inbound channel Request
3. call adapter
4. Response
but i am unable to see
1. Receiver Determination
2. Interface Determination
3. Receiver Grouping
4. Request Message Mapping
5. Technical Routing
whereas in the develoment system i am able to see the above all.
is there any configuration i have to do in the SXMB_ADM?

can i know that Configuration objects were created/ imported by using transport mechanisum?
if created ,
check the cache status and re activated those objects whatever u r posted in thread.
if transported :
u ll follow ,whatever posted by Earlier

Unable to see line items in segment clearing account

Friends,
Why we are unable to see the line items in intersegment clearing account/zero balance clearing account, eventhough the master is maintained as open item and line item display.

Hi,
I have received the following error message.
Account 1999990, company code xxxx is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

Users are unable to see their own profile photo although everyone else can see it in Lync 2013 client

We have Lync 2013, Exchange 2010 and several AD
servers in mixed mode 2003/2008.
All user are unable to see their own profile photo
either in the main Lync window, in the settings or in a chat although other user can see that their photo is there and displaying. The user experiencing the issue can go open Outlook 2013 client and will see their photo displaying correctly in the file menu
(and elsewhere) here.
I have confirmed this happens with any new users I set up as well. We have gone through a fair amount of troubleshooting with other Lync photo issues and simple fixes such as deleting the SIP cache folder etc proves to be ineffective.
Our Cs-ClientPolicy Global is set to websearchonly.
We have "Replicate this attribute to the Global Catalog" set
for the ThumbnailPhoto attribute in AD.
We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto
PhotosFromADOnly"
and finally we are importing the photo in ad using this PS command:
"Import-RecipientDataProperty -Identity "Test User"
-Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB in size.
I have followed many threads and will provide any information I can to help find the problem. Thank you in advance.
EDIT: I have also tried the following but with no success: https://knowledge.zomers.eu/misc/Pages/How-to-fix-your-photo-not-showing-up-in-the-Lync-client.aspx

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to see the Hyperion tab in Excel 2003

Hi Hyperion gurus,
Can anybody shed light on an issue that a user encountered with Smartview? This user installed Smartview and had been using it without any problems. We just started parallel testing and he needed to use Smartview as part of the process. He is now unable to see the add-in in Excel 2003. He has no Hyperion tab and we cannot find any evidence that it has been installed. We reinstalled Smartview but even after reinstalling Smartview he is still unable to see the Hyperion tab in Excel. What is puzzling is that he does have the Hyperion tab in Word and is able to connect.
Would appreciate any help provided? Thanks.

I have seen the same exact problem at my company regarding the missing Hyperion tab in Excel (but present in MicroSoft Word). If you go into Excel, then select 'Help', then About MicroSoft Excel, then you'll see 'Disabled Items'. Scan the list for HSAddin.Dll. If this is on the list, highlight it, then select the 'Enable' button. (this is my first suggestion). I've also had to do the following in some isolated cases:
You should also try re-registering the following 3 SmartView DLL files. To do this, simply locate where these 3 files are stored on your local machine (the file names are):
HSAddin.dll
HSSpread.dll
HyperionSmarttag.dll
Usually these are stored within the following path: C:\Hyperion\Smartview\bin
To Register the files:
Open DOS (start->run->cmd) and change your path to C:\Hyperion\SmartView\bin
Type in the following, hitting enter key after each line:
regsvr32 hsaddin.dll
regsvr32 hsspread.dll
regsvr32 hyperionsmarttag.dll
You should receive a 'success message' for each file you register. Reboot your machine following this, and go back to Excel. Your menu should now be in place.
Thanks,
James Pryal

Unable to see field list in Excel 2013

Unable to see a list of fields to choose from when creating a pivot table. I only see the field table.
I have tried this ActiveWorkbook.ShowPivotTableFieldList =True and received the following message
We found a problem with this formula, We couldn't find a range reference or a defined name.

Hi,
Did the issue occur in the special file or all the Excel 2013 file?
If the issue occur in the special file, it might be caused by the file self, I recommend you copy/paste it to a new/blank file to test.
If the issue occur in all the Excel 2013 file, it might be caused by the Excel15.xlb corrupted. It is located in your Windows user profile which varies with OS (Documents and Settings or Users).
C:\Documents and Settings\Username\Application Data\Microsoft\Excel
C:\Users\UserName\AppData\Roaming\Microsoft\Excel.
Rename the file (Please note: If you don't backup it, you will lose any custom settings you may have made for Excel.) and then Excel will recreate it the next time Excel is opened.
If the issue still exists, please try to share us a sample file through One Drive, I want to test it.
Regards,
George Zhao
TechNet Community Support

Unable to see IDOC sent by R3 in XI

In XI server, we have done partner profile(ALE/IDOC) configuration due to some special requirement. Now XI server unable to receive the IDOC. After from this, I am unable to see the IDOCs that were processed earlier. Before this ALE/IDOC configuration, I was able to send IDOC to XI and also able to see IDOC in IDX5 and sxmb_moni. When I send IDOC from R3 then status of IDOC is 03. But when we check the IDOC in XI server using IDX5. I don't see any IDOC.

Hi,
what more can bd87 tell then We02 ?
transaction code mentioned by Jai needs to be checked only
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Unable to see BCC list in Sent Item

I have Outlook 2013 in Windows 7 Pro. I have sent a number of messages addressed to multiple addressees in the BCC field. However, when I open the Sent email, I am unable to see the BCC field and the addressees. I know they have received the message. Double
clicking the message doesn't help. How can I see the list of addressees?

Hi,
Do you have other accounts configured in Outlook? If yes, do they display the Bcc field?
As Diane mentioned in the earlier post, please add Bcc column in the VIEW and check if the Bcc information is stored by your account:
Open the Sent Items folder, go to VIEW tab -> Current View -> Change View -> Select "Preview".
Then right click on the top bar of the email list, select "Field Chooser", choose "Address fields" in the dropbox, and drag "Bcc" to the top bar.
If the Bcc information was actually stored, you will find the "Bcc" information in the column. If you don't even find the Bcc information under that column, it seems that your account type doesn't store the Bcc information, it happens with some
account types.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Why does my screen darken at random moments? Im unable to see my screen, I cant even unlock it to check on apps

I just received the iphone 4s but at random moments the screen darkens and I am unable to see anything. Im not even sure my phone is on unless I completely turn it off and on again but when I turn it back on the screen is dark. I cant unlock my phone adjust the brightness or anything not that matters because my brightness is all the way up. Please Help

Have you tried reset?
Restore?
Page 46 of the manual:
"If something isn’t working right, restarting, force quitting an application, or resetting
iPhone will likely solve the problem.
Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears.
Slide your ﬁnger across the slider to turn oﬀ iPhone. To turn iPhone back on, press and
hold the Sleep/Wake until the Apple logo appears.
If you can’t turn oﬀ iPhone or if the problem continues, you may need to reset. A reset
should be done only if turning iPhone oﬀ and on doesn’t resolve the problem.
Force quit an application: Press and hold the Sleep/Wake button on top of iPhone
for a few seconds until a red slider appears, and then press and hold the Home button
until the application quits.
Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the
same time for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix A, “Troubleshooting,” on "
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

TWO PROBLEMS:( BLACKBERRY CURVE 9300) 1) Unable to send/receive e-mails 2) black square with a minute hand whizzing round

Hello,
I have a BLACKBERRY CURVE 9300
i would be most grateful if someone could help me with persistent problems, which ive previously enlisted the help of T-mobile to resolve but to no avail.
1) I am unable to send/ receive e-mails, this has been an ongoing problem which seems to sort itself out for a short while then returns, i have been asked to remove e-mail accounts from device and re-boot, and as i say works for a short time then starts again.
2) I have this annoying black square in the middle of the screen with like a second hand whizzing round which can sometimes last ages. I was told by t-mobile this was due to not doing regular device updates, i have since done this and as i type continue to see this symbol.
Any advice/suggestions would be gratefully received.
Thankyou.
Andrew Goodall

The spinning clock is usually an indicator of low memory. Make sure you are completely closing apps your aren't using by using the close or exit option in the menu instead of just backing out of the app with the escape key. Also check your memory after you have rebooted your device. If it is still low then you may have to delete apps you absolutely don't need or use to get memory back.
As for the email issue I am assuming you have a data plan since you have tried to fix the problem with Tmobile. If you haven't done so you may have to re-register your phone on the network and or log into Tmobile's BIS site to resend your service books.

Approval unable to see add additional line items

Hi Everyone,
User created a shopping cart which went to the approver for approval. Approver was unable to see blank line items to add further more items. This is case with only single user for other users shopping cart this is working fine.
Regards,
Munna

Hi,
I have received the following error message.
Account 1999990, company code xxxx is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

Unable to see interface on ASA 5510 Firewall

Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                x.x.x.x           YES CONFIG up                    up
Ethernet0/1                x.x.x.x           YES CONFIG up                    up
Ethernet0/2                unassigned      YES unset administratively down down
Internal-Control0/0        127.0.1.1       YES unset up                    up
Internal-Data0/0           unassigned      YES unset up                    up
Management0/0              192.168.1.1     YES CONFIG up                    up
Please suggest what could be the reason.
Regards
Pankaj

Hi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Ext: Ethernet0/0         : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1         : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2         : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3         : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0       : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used            : irq 11
6: Int: Not used            : irq 5
Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 50             perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
Security Contexts                 : 0              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 250            perpetual
Total VPN Peers                   : 250            perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik

Unable to see 'Search Dialog Box Component' option

In trying to follow Thilo Brandt's article to 'Develop a Serach Component for KM Search iView', but I'm unable to see Content Management -> User Interface -> Mapping -> Search Dialog Box Component. Is there something I need to 'turn on' so that I can view that option?
We are using EP6 SP2.
thanks,
Biju.

Forgot to mention that the article is available at: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/developing a search component for km search iview.article

HT204291 Airplay mirroring. Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions

Airplay mirroring.
Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
Firewall set correctly (allow incoming...)
When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
Any help appreciated.

Hi!
I figured it out! It was a firewall issue.
I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
I hope that I can help some people with this info to fix the problem.

In SXI_monitor unable to see receiver

Similar Messages

Maybe you are looking for