In system information, battery information for 17in m.b.p

in system information, battery information for 17in m.b.p what should the readings be for a new battery,anyone, thanks peter

If you want reliability and a battery that has a warranty, have Apple install it for you and pay the price. If you want uncertainty and the possibility of a battery life of a month, a week or less, purchase a third party battery.
To date I have yet to see with certitude a genuine Apple replacement battery offered to the public. I have seen many tales of woe of users who have purchased third party batteries and have regretted the decision. Often in the long run, these purchases cost more than an Apple battery. Search these forums and my view will be substantiated.
Your choice.
Ciao.

Similar Messages

OTO information not complete for non ABAP instance of system &1 in SMSY

Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban Hartzstein

Hello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein

Error during install " specify system property "is.debug" for more information."

I am trying to install Livecycle Reader Extensions onto a Unix box and the setup.sh is giving the following error when I try to invoke it.
"An unhandled error occurred -- specify system property "is.debug" for more information."
Anyone know how to set the is.debug property?
Sorry i'm not to familiar with the unix env.

Andrew,
can you provide more information on the following?
- variant of Unix
- java version installed
- reader extensions version
- application server enviornment intended (WAS, Weblogic, JBOSS?)
Thanks
David
www.ensemble.com

How to get battery information for macbook air 13"

Hi,
I am using macbook air 13" released by the end of last year.
For personal reason, I have to buy a new battery for my mba through the internet.
So, how can I check the battery information (such as release day and last day of warranty) using its serial number?
It is not easy to find such service in apple.com in case of macbook air battery.
Thanks for your reply.
Jonghun Park.

That page supports for (as it mentioned below)
iPhone, iPad, Mice and Trackpad, iSight, Portable Computers, AirPort, iPod, Displays, Xserve, Desktop Computers, Keyboards, Apple TV
NOT FOR THE BATTERY EMBEDDED IN MACBOOK AIR!! :<
(And the length of serial number of battery is longer than above HW products)
Thanks for your answer, by the way.

I'm running OS X 10.4.11 on my PowerMac, and cannot retrieve email. Does this have to do with iCloud? I also cannot upgrade my operating system as my computer won't accept it. Any information about this for me? Thank you!

I'm running OS X 10.4.11 on my PowerMac, and cannot retrieve email. Does this have to do with iCloud? I also cannot upgrade my operating system as my computer won't accept it. Any information about this for me? Thank you!

Hi Steve,
If this is dot mac or Mobile me you can still use IMAP eMail in the iCloud.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
    •    Server name: imap.mail.me.com
    •    SSL Required: Yes
    •    Port: 993
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
SMTP (outgoing mail server) information:
    •    Server name: smtp.mail.me.com
    •    SSL Required: Yes
    •    Port: 587
    •    SMTP Authentication Required: Yes
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

My mac is not charging, its been like this since morning. Battery Information:    Model Information:   Serial Number:     D86241503EVDKRNAL   Manufacturer:     SMP   Device Name:     bq20z451   Pack Lot Code:     0   PCB Lot Code:     0   Firmware Version

Battery Information:
Model Information:
Serial Number:          D86241503EVDKRNAL
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          406
Hardware Revision:          000a
Cell Revision:          162
Charge Information:
Charge Remaining (mAh):          778
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          6178
Health Information:
Cycle Count:          95
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          7440
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
AutoPowerOff Delay:          14400
AutoPowerOff Enabled:          1
Current Power Source:          Yes
DarkWakeBackgroundTasks:          1
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Standby Delay:          4200
Standby Enabled:          1
Battery Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
AutoPowerOff Delay:          14400
AutoPowerOff Enabled:          1
DarkWakeBackgroundTasks:          0
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Standby Delay:          4200
Standby Enabled:          1
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0000
Revision:          0x0000
Family:          0x0000
Serial Number:          0x00000000
Charging:          No

Try doing a SMC RESET and see if that sorts it out for you - had to do that to my Macbook once and it worked for me.
Good luck.

I cannot use battery information when i upgrade kernel

Today I performed Pacman _Syu. I upgraded my arch linux kernel to 3.0.6-1.
I rebooted my arch system. After that, my arch system printed the error.
"Battery information not supported by your kernel!"
I try downgrading kernel to 3.0.4-2 and was able to use battery information again.
What is solution of not available latest kernel in my system?
My PC is ACER ASPIRE 1410.

The reason for the error message is probably the ONFIG_ACPI_PROCFS_POWER option, that was removed from the newest kernel. See FS#25845.
What application is giving you this error? Perhaps there is an update available for it?
Otherwise you could recompile the kernel yourself with the option set.

Battery information is worrying

i'm new to the forums but i did look at a couple of the older posts. Some people have problems with their batteries and i decided to check mine in the system profiler. I don't exactly know how to interpret it but it says check battery. i don't know if its because of using it a certain number of times or what. any help would be appreciated. I bought it on eBay from a guy who bought it back in May this year (2008) any help would be appreciated. i also made sure that i had the latest battery update (1.3 i believe) and i do.
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-3827-9d2c
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 2889
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4327
Health Information:
Cycle count: 184
Condition: Check battery
Battery Installed: Yes
Amperage (mA): 1521
Voltage (mV): 12433

Does the battery charge OK? Do you occasionally calibrate the battery? When fully charged what is reported for "Charge remaining?"
Normally, Apple guarantees that the battery will retain at least 80% of its original full charge capacity by 300 cycles. Your battery seems to have less than 80% after only 184 cycles suggesting that indeed the battery may be defective. You can call AppleCare or visit your Apple retailer to see if you qualify for a battery replacement.

Understanding "Battery Information" - Help Please

Have 17" G4PB, PPC, 1.5GHz, 1.5G Memory, 80G HD, OSX 10.5.8. Here is my "Battery Information"
Charge Information:
Charge remaining (mAh): 2816
Charging: No
Full charge capacity (mAh): 2816
Health Information:
Cycle count: 388
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12503
How the heck did I get 388 cycle counts?! And does the 2816 for both "remaining" and "full charge capacity" mean I'm out of juice? This battery is about 1-1/2 years old. Any assistance appreciated.

Happy thanksgiving!
The concept of "cycles" is covered in this Apple tech article:
http://www.apple.com/batteries/
The bit about "charge remaining" and "full charge capacity" can be understood in the context of a metal drinking cup (fill with your favorite virtual libation, of course):
When new, the cup hold 12 ounces. Therefore its charge remaining and full charge capacity are roughly the same--12 ounces. If you drink four ounces, the "charge remaining" is 8 oz but the full capacity is still 12.
Let's say that, after the can is used and bumped around for a few months, it picks up a big dent that intrudes into the interior, reducing how much beer liquid it can hold by two ounces. The "full charge capacity" is now down to 10 ounces or 83 percent of its original capacity. When people talk about battery "health," it's this. Health is current full charge capacity divided by a baseline number, about 5400 for the 17" PowerBook. Your health is therefore 52 percent.
"Percent charge" in the power icon is how much the present capacity (not original) is currently used. In the bent cup example. even though use reduced the capacity to ten ounces, you can put 10 ounces in it. It's 100 percent full in its present, reduced-volume condition.
System profiler does not calculate "health" for you and does not give the baseline value. There are a couple of freeware utilities that read the machine type and use the correct baseline to show health as a percentage of the original capacity:
http://www.apple.com/downloads/dashboard/status/istatpro.html
http://coconut-flavour.com/coconutbattery/index.html
If I've substituted mud for understanding, please post back and I'll try again.

Hp pavilion showing wrong battery information

hp pavilion showing wrong battery information, also not giving warning message when battery low. Sometiimes its showing right information. What should i do to solve this problems?

Hi @ajmalmji ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that your battery power is not showing correctly and does not provide warnings.
Here is a link to Test and Calibrate battery. As you did not provide your Operating System you will need to select the correct one from the list.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

A PDF document with information about activation for CS6 software

Here's a PDF document with information about activation for CS6 software.
I found it very useful for understanding how the system worked for activation of perpetual licenses, both in cases where the computer is and isn't connected to the Internet.

Ann, with some browsers, the PDF document will download in the background rather than appear in a browser window.

The system cannot download information from the SQLSERVER server.

Hi All,
After BPC 7.0 SP6 for MS install we get the following when trying to access the "Manage Application Sets" or any other admin console task, when we try to execute the connection wizard:
The system cannot download information from the SQLSERVER server.
There may be a network or security issue.
Error Message:Error code: 500
any ideas?
Br
Steven

Steven,
Could you also make sure that the problem is not on the client side.
Is this a fresh installtion on the client machine? Or was there already an previous version of BPC on this machine?
If this is not a fresh install, you can try to uninstall the software and then deleting all the files in the folder
"program files\BPC". I've seen that sometimes not all the files are automatically deleted.
Then installing the Bpc client agian...
Kind regards,
Sam

Tecra Battery Information Tool - Cycles and Production Date

Hi everybody,
I am searching for a Battery Tool, which reads out the whole Battery information. Aspecially the Production Date, First used Date and charging cycles. Is there a tool available by Toshiba or another Freeware tool? Is there another possibility to read that information?
Generally, does the Toshiba Battery capture this information? I only know the possibility to watch all this information from IBM, they use the BatteryMaximiser, which shows all the info. I have been searching the web but did not find anything. Please help.
best regards
Matty

Hi,
I need the information for an exact classification of the Battery. You do not get enough information about the Battery condition in the normal Power Management or in the Power Saver. There are tools which show the original and the available Battery capacity, but it is not possible to say anything about the remaining lifetime of the Battyery. So the information is quite important for me.
best regards
Matty
[Edited by: admin]

'The state information is invalid for this page and might be corrupted' error

An admin user added a 'widget' for internet content to be displayed on our intranet (sharepoint). Now, anytime I try to modify the page (it is still checked out) I get this error:
The state information is invalid for this page and might be corrupted.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: The state information is invalid for this page and might be corrupted.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
  <%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Stack Trace:
[FormatException: Invalid character in a Base-64 string.]
System.Convert.FromBase64String(String s) +0
System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +67
System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4
System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37
System.Web.UI.HiddenFieldPageStatePersister.Load() +136
[ViewStateException: Invalid viewstate.
Client IP: 10.10.16.77
Port: 3996
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MS-RTC LM 8; InfoPath.2) chromeframe/5.0.317.0
ViewState: 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...]
[HttpException (0x80004005): The state information is invalid for this page and might be corrupted.]
System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +267
System.Web.UI.HiddenFieldPageStatePersister.Load() +218
System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +83
System.Web.UI.Page.LoadAllState() +35
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +7350
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +213
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.WELCOMELINKS_ASPX__1775745042.ProcessRequest(HttpContext context) +4
Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context) +153
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +358
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Should I Publish it then re-check it out to edit or even restore to a prior version?

Try one of the tips in these blog posts:
http://weblogs.asp.net/lduveau/archive/2007/04/17/viewstate-chunking-in-asp-net-2-0-maxpagestatefieldlength.aspx
http://delroger.wordpress.com/2008/08/19/invalid-character-in-a-base-64-string-aspnet/
I suspect that the webpart the user added is putting a large amount of data into the page's Viewstate.
Bryan Phillips
MCT, MCSD, MCDBA, MCSE
Microsoft MVP - SharePoint Services
Blog: http://bphillips76.spaces.live.com
Web Site: http://www.composablesystems.net

Weird Battery informations

Hi,
Without any sort of previous symptoms, my battery indicates me bad informations (it began 2 days ago) : Please find below a copy/paste of the status of my battery :
Informations sur le modèle :
Nº de série : Sony-ASMB012-3702-ecba
Fabricant : Sony
Nom de l’appareil : : ASMB012
Pack Lot Code : 0003
PCB Lot Code : 0000
Version du programme interne : 102a
Révision du matériel : 0500
Révision de pile : 0303
Informations sur la charge :
Charge restante (mAh) : 65336
Charge complète : Oui
En cours de chargement : Non
Capacité de charge complète (mAh) : 65336
Informations sur la santé :
Comptage de cycles : 431
Conditions : Bonne
Batterie installée : Oui
Intensité de courant (mA) : -1227
Tension (mV) : 11598
As you can see, my battery is always "fully charged" ... When I plug the macsafe, I'm not able to reload my battery (because it still indicates that there is no need to be charged). If I'm waiting for my computer to shut down (because of low batt), I'm able to reload it (with some difficulties because of bad informations).
My battery has no particular problem, except for these bad informations.
Is there anybody who shares such a problem, it there any way to "reset" my battery (I tried to reset the SMC, with no result) ...

This is usually a sign of a bad battery - Capacité de charge complète (full charge capacity) should be 5000-5500 mAh for your machine, not 65336 mAh. Your Comptage de cycles (cycle count) is 431 - most Li-based batteries last 400-500 charge cycles. You will most likely need to purchase a replacement battery (Apple will not cover it under warranty/AppleCare with >300 cycles).

In system information, battery information for 17in m.b.p

Similar Messages

Maybe you are looking for