In T-code AIBU: AuC Setellement screen error

Hi Gurus,
I am doing AUC setellement in AIBU, done with settlement rule.
while executing the AIBU the error displayed is "Company code  is not defined for Assets Accounting".
Pls help,

Hi
Please check if the Chart of depreciation has been assigned to the Company Code.
Regards
Poornima

Similar Messages

  • Blue screen error code. Please help.

    late 2008 version.
    Recently my school reinstalled windows 7 but after he did that, there was some blue screen error code which only appears while running on windows and everything is fine on the mac side.
    He reinstalled windows 7 again but the blue screen error code started again. He said that it could be that my apple disc is not original which caused the error code, however last year they were able to installed windows 7 without any issue. He also said that it could be the hard drive problem.
    Another problem I have is that while on windows the hard disk drives doesn't show the mac too.
    Please help! Much appreciated if any of you can help me out.

    Unless you run a VM such as Parallels, you're not going to be able to see your Mac disk using Boot Camp. If I were you, I'd see about getting Parallels Desktop and installing Windows 7 on it. You can then inter-operate with both systems.
    Clinton

  • GL ACCOUNT DOCUMET SCREEN-ERROR CODE-CO CODE Vs. COUNTRY

    Hai,
    While working on GL Account document screen, Error message comes as Company code not assigned to country or Country to calculation procedure,. Also method to track T code in SPRO.
    Regds
    Titus George

    Hai Titus,
    Check the assignemnt of country to calculation procedure in the following path.
    Spro -Financial Accounting Global settingsTax on sales and purchases --Assign country to calculation procedure.
    Thanks,
    Sekhar Thallam.

  • HT4061 I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

    I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?  Does a totally dead battery have that effect?  I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
    Please help, thanks in advance all1

    Hi eggroll77,
    Welcome to Apple Support Communities.
    That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
    iOS: Restore errors 4005, 4013, and 4014
    I hope this helps.
    -Jason

  • BLUE SCREEN ERROR!!! - Stop: 0x00000124 (0x00000003 0x00000000 0x000000000 0x00000000)

    hi,
    When i restart my Windows 2008 R2 server,suddenly a blue screen appeared. In the screen the message was like,
    System malfunction call your hardware vendor for support. After getting this message i gave a force restart but while booting
    i got another blue screen error in which i got the below error code
    Stop: 0x00000124 (0x00000003,0x00000000,0x000000000,0x00000000) and after dumping physical memory(100%) the system is keep on restarting as it happened before with blue screen.
    In the server machine LCD display i am getting another error message like,
    E1716 Chipset IERR. Bus 0 Dev 20. Function 2 . Review &. clear SEL.
    Can anyone help me to understand the actual problem and how come i can resolve this?...

    This from the Dell web site.
    The system BIOS has reported a chipset internal error that resides in bus ##, device ##, function ##.
    Check the SEL for more information, and then clear the SEL. Remove AC power to the system for 10 seconds, and restart the system (SEL = System Event Logs)
    So I probably contact the hardware vendor.
     http://msdn.microsoft.com/en-us/library/windows/hardware/ff557321(v=vs.85).aspx
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

    I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

    Hi btgclark,
    I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
    If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
    Please let me know how this works out for you, thank you.
    I worked on behalf of HP

  • Satellite A60-102 - Blue screen error appears on screen and system restart

    Sometime Blue screen error showing on screen and system restart
    how can solve this problem

    Hi
    What BSOD code you get exactly?
    Which OS you are using?
    Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
    Can you boot in safe mode?

  • Blue Screen Error on Equium A100-549

    Hi,
    I took home a laptop that faced a blue screen error whenever it was starting up. I was provided with the essential components and did a format using the recovery CD. Once it was complete, I took out the recovery CD as instructed then clicked exit. The black window said format complete and the PC switched off. When I try turn it on an orange light flashes on one of the LEDs and the PC doesn't switch on. Most of the text was in Chinese while it was working too (the owner's Chinese). I would appreciate some assistance.
    Thank you very much.

    Hi
    According to your description I suppose that the LED flashes all the time if the AC adaptor was connected. Am I right?
    I think there is a hardware malfunction and the LED provide an blinking code.
    Unfortunately, I dont think that you can solve this problem by yourself.
    In my opinion a technician should check the notebook. The service guys are able to read the code and could locate the fault.

  • Blue Screen Error after Synching

    I had Blackberry Desktop Manager 7 installed on my WIndows XP machine...I have been getting Blue screen errors frequently after my  Outlook is synched wiht the device..I was on BDM 6 prior to this and used to consistently get Blue Screen Errors. I used to think there was some other issue with the laptop until recently when I got a new one and I installed The desktop manager.
    Once i realised that, I uninstalled the Software from my desktop yesterday but I read a lot of blogs that said that the BSOD will continue to come as your normal uninstalls are incomplete..Could you let me know how this can be fixed? Do you have a stable version of the desktop manger that doesnt give a BSOD?
    I need to sync my device with Outlook everyday..and I cannot afford BSOD's everyday..

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Sof​tware-for-PC/Cleanly-quot-Starting-Over-quot-with-​...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    BSOD's are actually more rare of a problem, from what I've seen, and often indicate something more core wrong with the actual PC, Windows installation, or something else...and the RIM Desktop Software is simply revealing this deeper flaw rather than being the cause of it. In the worst case scenarios, I've actually heard of folks doing a clean rebuild of their PC (e.g., reinstalling Windows from scratch) and that rectifying the problem.
    Ohhh...one last thing:
    jinugeorge wrote:
    Do you have a stable version of the desktop manger that doesnt give a BSOD?
    FYI -- From the wording, I suspect you are misunderstanding the purpose of these forums. This is a user-to-user community, not a user-to/from-RIM channel for any communication whatsoever. So, by "Do You", you are actually asking that of other users, "out there", just like you who happen to be volunteering time to help others out.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blue Screen Error - DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys) - Satellite Laptop

    Hi, I have been getting blue screen errors the past couple days.
    The error says: DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys)
    Attached is the dump file. Let me know if you are able to open it. Any help would be appreciated!
    https://onedrive.live.com/redir?resid=B6AB1143124F198F%21442

    Which Satellite? There is a label on the bottom.
    Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
    Caused By Driver  : fvevol.sys         <---  BitLocker Drive Encryption Driver 
    If you saw Netwbw02.sys mentioned, give us some more .dmp files.
    ==================================================
    Dump File         : 020215-31750-01.dmp
    Crash Time        : 2/2/2015 2:14:04 PM
    Bug Check String  : DRIVER_IRQL_NOT_LESS_OR_EQUAL
    Bug Check Code    : 0x000000d1
    Parameter 1       : ffffd001`1c2c1000
    Parameter 2       : 00000000`00000002
    Parameter 3       : 00000000`00000001
    Parameter 4       : fffff801`9eff6874
    Caused By Driver  : fvevol.sys
    Caused By Address : fvevol.sys+15f6874
    File Description  :
    Product Name      :
    Company           :
    File Version      :
    Processor         : x64
    Computer Name     :
    Full Path         : C:\Test\020215-31750-01.dmp
    Processors Count  : 4
    Major Version     : 15
    Minor Version     : 9600
    ==================================================
    -Jerry

  • Blue Screen Error while login screen in My Compaq CQ40 133TU

    Mate , 
    I cant login my system. when i swtich on my sytem till login screen it ll coming , but after that showing blue screen error wth this error code 
    *** stop : 0x0000008E   (0xc0000005, 0x0044005C, 0x92000908, 0x00000000)
    What to do ? Please give a solution
    Product : Compaq Presario CQ40
    S/n :[Personal Information Removed]
    P/N : FW554PA#ACJ
    os : wINDOWS 7

    Hi
    Please find the link given below might help you to resolve your issue.
    http://support.microsoft.com/kb/315335
    http://support.microsoft.com/kb/827663
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Blue screen error 1033

    I am getting Blue Screen error 1033. Following is link of .dmp file
    https://skydrive.live.com/redir?resid=D0DC1B82B20BAC80%21121

    Hi,
    The Bug_Check D1 CAUSE netio.sys which is a Windows component which means something else drove it into Fault. Most likely are the combination of third party security programs and the network drivers.
    Generally, you may update BIOS and other hardware drivers first.
    Do you have any third party security programs installed?
    If so, please temporarily disable all the third party security programs and test the issue.
    Meanwhile, you may reinstall or update the drivers for the network related device.
    In addition, I would like to suggest you refer to the links below to check the issue:
    Bug Check Code 0xD1:
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244%28v=vs.85%29.aspx
    Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2 from sleep or from hibernation: "STOP: 0x000000D1"
    http://support.microsoft.com/kb/978982
    Hopefully you could resolve your issue soon.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Blue screen error 0x0000006B windows 7 64bit

    I have blue screen error code 0x0000006B PROCESS1_INITIALIZATION_FAILED on my vaio laptop. I tried safe mode and safe mode with command prompt and still doesnt work either. Someone help fix this issue please

    Hi,
    Which phase did you come across this error?
    Read this article to see if it's helpful to you:
    "Stop error code 0x0000006B PROCESS1_INITIALIZATION_FAILED" error message during startup on a computer that is running Windows 7 or Windows Server 2008 R2
    http://support.microsoft.com/kb/981833
    If the issue persists, like ZigZag said, after upload the minidump file into OneDrive, then share the link here.
    To share the file, prefer to this article:
    Share files and folders and change permissions
    http://windows.microsoft.com/en-in/onedrive/share-file-folder
    Karen Hu
    TechNet Community Support

  • Blue screen error 1gdpmd64.sys

    I have a hp pavillion g7 notebook computer which keeps getting a bsod crash each time internet graphics are accessed.  i have researched the error code and it seems to be a graphics driver issue.  I downloaded a new version of the amd graphics driver from the hp website support and i tried to restore the computer to a previous point in time when the bsod was not occuring.  All to no avail.  the webpage graphics are not able to be displayed and the blue screen error keeps returning.  In the device manager section of the computer, none of the icons are showing issues and i can't figure out what could be causing the problem.  Any suggestions would be greatly appreciated.  thanks

    Hi beold,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are suffering from a BSOD. Can you provided more information on the error message that you are getting? Have you tried a different browser to see if the same error occurs. What is your product number? What operating system are you using?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Screen error while adding  table control to existing tab in BP screen

    Hi experts,
    Requirement: Add new section with table control in existing tab in BP screen. Purpose of creating table control is to add or delete multiple entries etc.
    To fill this requirement, we have created custom transaction with table control facility. When we run this transaction from SAP easy screen, we are able to add, delete and create multiple records to database.
    We have configured this custom program and screen in BDT (views) and saved.
    When we call BP transaction we are getting following error message.
    "Screen ZMOD_TEST1 0100 must be an Include screen (screen error)".
    We are not sure, the approach we have chosen is correct. Incase, any one of you come across this type of problem, please guide us to rectify.
    Thanks in advance.
    Venky

    Venky,
    If you are on CRM 4.0 or even 5.0, my approach to adding a table to business partner attributes would have been the following:
    - Use EEWB to generate the table extension
    - Modify the generated code/screens if what was generated did not meet you complete requirements
    However going back to your original question, if you add new screens for the BDT, then they must be "subscreens".  The screens you create for the BDT tool are always subscreens placed in a container by the BDT program.
    So your options are one:
    1.  Convert your screen to a subscreen and if you have coded all the BDT event function modules correctly it should work
    2.  Use EEWB to generate a new extension and make adjustments as necessary.
    Good luck,
    Stephen

Maybe you are looking for