In table PRPS field PSPHI

hi all,
In table
PRPS field PSPHI the field type is NUMC 8 .
but the data displayed in table is more than that length.
what is to be changed or adjusted here ?
thanks
amit

Hello Amit,
This due the Conversion exit.
When u r fetching data from PRPS with PSPHI u need to use the PROJ-PSPNR field. Then it will fetch all the WBS elements related to the concerned project.
If useful reward.
Vasanth

Similar Messages

Qustion about the transparent table PRPS

Hi experts,
I have a question about this table PRPS.
When I use SE11 to search some entries from this table,first,I input value for the field POSID on the selection screen,I can find out the entries;Then I copy the value of the field PSPNR and input this value to the selection screen,I click the button 'execute',but the system hints that 'WBS element 00000004 does not exist'.I don't know why.Could you please give me some advice to explain this question??
thanks & best regards,
Villy

Hi,
Currently your system is showing internal 8 digit number in PSPNR. I am sure it must be different from POSID. The conversion exit is disabled in your system. To enable, goto Settings->User parameters on execution screen, check the tick box 'Check conversion exit' under format section. Come out of the table and re-enter. Now after execution you will observe that POSID and PSPNR are same.
Its just an issue of conversion exit not being active.
Regards

How to pass the values from internal table to field groups

hi all,
how can i pass the internal table values to field groups?
already field groups are holding some values.. INSERT STATEMENT IS NOT WORKING as it is ovewriting the existing values..
Use full answers will be rewared.
Thanks.
Moderator message - duplicate post locked
Edited by: Rob Burbank on Jun 23, 2009 9:51 AM

Hi,
You can use INSERT statement to put a work area of an Internal table in Field-group
and use Extract to get info out of it.
Hope it helps,
Raj

About Asset report - table and fields

Hi ,
I am developing an Asset Report, I need table and field names for following -
a) GL A/C P&L
b) ASSET DEPRECIATION SCHEDULED
c) FORCASTED DEPRECIATION
d) PLANNED EXPENSES VERSES ACTUAL EXPENSES
e) GAP DEPRECIATION CATEGORY
e) When user enters the asset into SAP, the depreciation expense will automatically book to the sub-ledger. However in order to get the amount on the general ledger, which would be closed for prior periods, user must book a manual entry. So , I need this manual entry field.
Please guide me.
Regards,
Narayan

problem solved

Sale Order Item Level Text Field which table and field

Hi,
Thanks for your prompt reply and best solution.
Can you please tell me one more thing, in sale order at item level the TEXT Field maintaining by user at transaction level now they want that field in one of the report, so can you please tell what is the table and field where i will get this sale order item level text details.

Hello,
is this going to work for item level text as well.
can you tell how to proceed with this functional module
or is there any other thing required.Please elaborate to
understand better way.
You can check out two table in respect to Sales TEXT i.e. STXH (STXD SAPscript text file header) and STXL(SAPscript text file lines).
The best approach of tracing out the Text in respect to Sales Order would be to use the Function module READ_TEXT and put this FM in SE37 and execute with the following parameter.
Client
Text ID of text to be read
Language of text to be read
Name of text to be read
Object of text to be read
Archive handle
Text catalog local
When you are essentially looking to read item level Text with respect to Sales Order then your Text OBject would be VBBP.
Regards,
Sarthak

Sales order item level partial delivery field table and field?

Will anyone share your expertise, In SD sales order level, at item what is the table and field name in which the partial delivery status is stored. I want the table and field name?. will anyone share pl.

Hi,
Try with table VBUP - and field LFSTA.
Regards

How do I find what table a field is in?

Hi,
If I know a field name, how would I search the Data Dictionary to find the table (or tables) that the field is found in?
For example, I have a program spec that that says field AZSUB is in table MARM, but it is not. How can I find what table this field is actualkly in?
Thanks for your help!
Andy

Hi Andrew,
Just goto se11, enter the data element of that field and clisk on the where used list on the application tool bar. You will get all the tables in which the field appears.
You got find out which would be your appropriate table may be using by the description of the table or the contents or by the links..
Regards,
Vinod Kumar

Disable / enable table control field at runtime

hi ,
i am working on a custom transaction in which i have a table control...depending on a table value i have to disable an input field inside the table control...
i know in a normal field we use
loop at screen.
if screen- name = 'XXX' or screen-group = 'XXX'
screen-output = 0.
endif.
but inside a table control field how to modify it.
Regards
Harish Ramakrishnan

All you need to do is put some code in a module of your PBO. This will change the cell attribute of a single row.
PROCESS BEFORE OUTPUT.
* PBO FLOW LOGIC FOR TABLECONTROL 'I_INTRCON'
* MODULE I_INTRCON_CHANGE_TC_ATTR.
* MODULE I_INTRCON_CHANGE_COL_ATTR.
LOOP AT I_INTR
 WITH CONTROL I_INTRCON
 CURSOR I_INTRCON-CURRENT_LINE.
 MODULE I_INTRCON_CHANGE_FIELD_ATTR.
ENDLOOP.
MODULE SET_CURSOR_FIELD.
MODULE STATUS_0200.
module i_intrcon_change_field_attr output.
modify i_intr index i_intrcon-current_line.
if i_intr-check = 'X'.
 loop at screen.
 if screen-name = 'I_INTR-RCVQTY'.
 screen-input = '1'.
 endif.
 modify screen.
 endloop.
endif.
endmodule.
Regards,
RIch Heilman

Table with fields containig more thn 300 characters

Hello Friends,
i want to create one ZTABLE and intht i want a field tht can store more thn 300 characters.
i have used string data type for the same but while activating the table its giving me error saying :
" Table contains more than 3 long string fields"
Pls suggest...
Sunny

hi
sunny ,
You can create table with field more than 300 characters but there should be one more field
which has to be primary key .
such as
create table ztest
in that create field MANDT type clnt size 3 primary key
name type String .
then change technical settings according to requirement .
Delivery maintenance
delivery class and Data Browser/Table View M
according to requirement .
Before activating table save technical setting and then activate .
Regards
deepak

What are the tables and fields in fico & sd module

what are the tables and fields in fico & sd module

Hi,
 Sales and Distribution:
Customers KNA1 General Data
KNB1 Customer Master Co. Code Data (payment method, reconciliation acct)
KNB4 Customer Payment History
KNB5 Customer Master Dunning info
KNBK Customer Master Bank Data
KNKA Customer Master Credit Mgmt.
KNKK Customer Master Credit Control Area Data (credit limits)
KNVV Sales Area Data (terms, order probability)
KNVI Customer Master Tax Indicator
KNVP Partner Function key
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents VBAKUK VBAK + VBUK
VBUK Header Status and Administrative Data
VBAK Sales Document Header Data
VBKD Sales Document Business Data
VBUP Item Status VBAP Sales Document Item Data
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
SD Delivery DocumeLIPS Delivery Document item data, includes referencing PO
LIKP Delivery Document Header data
Billing Document VBRK Billing Document Header
VBRP Billing Document Item
SD Shipping Unit VEKP Shipping Unit Item (Content)
VEPO Shipping Unit Header
Financial Accounting
FBAS Financial Accounting Basis
BKPF Accounting Document Header BUKRS / BELNR / GJAHR
BSEG Accounting Document Segment BUKRS / BELNR / GJAHR / BUZEI
BSIP Index for Vendor Validation of Double BUKRS / LIFNR / WAERS / BLDAT /
 Documents XBLNR / WRBTR / BELNR / GJAHR / BUZEI
BVOR Inter Company Posting Procedure BVORG / BUKRS / GJAHR / BELNR
EBKPF Accounting Document Header (docs from GLSBK / BELNR / GJHAR / GLEBK
 External Systems)
FRUN Run Date of a Program PRGID
KLPA Customer / Vendor Linking NKULI / NBUKR / NKOAR / PNTYP
 / VKULI / VBUKR / VKOAR
KNB4 Customer Payment History KUNNR / BUKRS
KNB5 Customer Master Dunning Data KUNNR / BUKRS / MABER
KNBK Customer Master Bank Details KUNNR / BANKS / BANKL / BANKN
KNC1 Customer Master Transaction Figures KUNNR / BUKRS / GJHAR
KNC3 Customer Master Special GL Transactions KUNNR / BUKRS / GJAHR / SHBKZ
 Figures
LFB5 Vendor Master Dunning Data LIFNR / BUKRS / MABER
LFBK Vendor Master Bank Details LIFNR / BANKS / BANKL / BANKN
LFC1 Vendor Master Transaction Figures LIFNR / BUKRS / GJHAR
LFC3 Vendor Master Special GL Transactions LIFNR / BUKRS / GJHAR / SHBKZ
 Figures
VBKPF Document Header for Document Parking AUSBK / BUKRS / BELNR / GJHAR
FBASCORE Financial Accounting General Services Basis
KNB1 Customer Master (Company Code) KUNNR / BUKRS
LFA1 Vendor Master (General Section) LIFNR
LFB1 Vendor Master (company Code Section) LIFNR / BUKRS
SKA1 G/L Account Master (Chart of Accounts) KTOPL / SAKNR
SKAT G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR
 Description)
MAHNS Accounts Blocked by Dunning Selection KOART / BUKRS / KONKO / MABER
MHNK Dunning Data (Account Entries) LAUFD / LAUFI / KOART / BUKRS /
 KUNNR / LIFNR / CPDKY / SKNRZE /
 SMABER / SMAHSK / BUSAB
FI-GL-GL (FBS) General Ledger Accounting: Basic Functions- G/L Accounts
SKAS G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR / SCHLW
 Key Word list)
SKB1 G/L Account Master (Company Code) BUKRS / SAKNR
FI-GL-GL (FBSC) General Ledger Accounting: Basic
 Functions - R/3 Customizing for G/L Accounts
FIGLREP Settings for G/L Posting Reports MANDT
TSAKR Create G/L account with reference BUKRS / SAKNR
FI-GL-GL (FFE) General Ledger Accounting: Basic
 Functions - Fast Data Entry
KOMU Account Assignment Templates for G/L KMNAM / KMZEI
 Account items
FI-AR-AR (FBD) Accounts Receivable: Basic Functions - Customers
KNKA Customer Master Credit Management : KUNNR
 Central Data
KNKK Customer Master Credit Management : KUNNR / KKBER
 Control Area Data
KNKKF1 Credit Management : FI Status data LOGSYS / KUNNR / KKBER / REGUL
RFRR Accounting Data A/R and A/P RELID / SRTFD / SRTF2
 Information System
FI-BL-PT Bank Accounting: Payment (BFIBL_CHECK_D) Transactions General Sections
PAYR Payment Medium File ZBUKR / HBKID / HKTID / RZAWE /
 CHECT
PCEC Pre-numbered Check ZBUKR / HBKID / HKTID / STAPL
FI-BL-PT-AP(FMZA)Bank Accounting: Payment Transactions Automatic Payments
F111G Global Settings for Payment Program for MANDT
 Payment Requests
FDZA Cash Management Line Items in Payment KEYNO
 Requests
PAYRQ Payment Requests KEYNO
Hope this solves your concern...
Regards,
Habeeb
Assign points if helpful

Help needed in Table and field

Hi all,
can any one tell me the table and field to get basic unit of measure and unit of issue.
I guess both are different.
Thanks

For base unit of measure, uom, T006 is the main table.But whereever you have a quantity yu will find UOM in that table. The field is MEINS.
when you say unit of issue, you mean actual unit of measure right?
In that case it again depends on what you are looking at. Example
in table LIPS there is base UOM and Actual UOM.
base is always "MEINS" and actual is "LFIMG" in this case.
So get the table in your functional area and check for the actual uom field in SE11.
Regards
Message was edited by:
Sandeep Bhavsar

Table and field for Department ID, Department ID desc, and DIV

Hi,
We're planning to develop a "Z" report, by extending CJI3 transaction. I want to add the following fields to this new report. I just wanted to know from what tables these fields are coming from standard SAP (I believe these fields might be related to controlling, so I'm posting in this forum):
1. Department ID
2. Department ID Description
3. Division (DIV)
Aman

Hi Asim ,
The currency in Material Master is updated from the Company Code.
At first system checks the company code for which the Plant is assigned and picks the currecy from the company code.
You can find the same in Table T001 ; Field - WAERS
What do u mean by Product ID ? Let me know where does it exist in Material Master.
If you know the view, press F1 and then Technical Inf to get the table and Field Name.
Regards
Ramesh Ch

Table and field for the given object

Hi all,
We are developing a report , i need following table and fields. Could you please help me on this?
Supplier
No of approval required
Approval status
Approval pending with
In approval since
Thanks in advance , will appriciate any input
Hareesha

Hi ,
Still am not able to find out the FM/ table whom its pending for approval (shopping cart). Could you please help me on this?
(E.g: Shopping cart got created and having 7 levels of approval (Manager1, 2, 3,4,5,6 and 7),let us say First 2 manageru2019s approved, 3rd manager has to approve the Shopping cart, we need to pull these information of pending with 3rd manager in our Z-report )
Thanks in advance
Harish

Sub Contracting PO- Table and Fields for Materials sent

Dear Friends,
I am preparing a functional spec for the sub contracting PO.
Can you pls provide information about the tables and fields from where the data about the materials to be sent to subcontractor are picked?
Its picking from the structure MDPM. But pls throw some light on the same how the data is picked and printed in PO from certain tables.
Thanks in advance
Shashidhar

Dear Shash,
Here some details of table infirmation not only your related feild available in all feilds
http://www.erpgenie.com/sap/abap/tables_fi.htm
Hope this helps you
Prem.

Key Figure Reference table and fields

I am getting the following error:
/BIC/CSSMMIMI1-/BIC/KFMI_LCHF (specify reference table AND reference field)
I am aware that it is asking me to put a reference table and field for the field in the structure.
However, what I am not sure about is should I do this action from SE11 or is there a program or other method which would be more suitable (this is not business content)?
Thanks

Hi Edwin,
Thanks for that, the currency type and quantity type are hard coded in the key figure for most of the key figures apart from one, i.e for the quanity I hard code PCS
From RSD2 I just check the repair option is that correct

In table PRPS field PSPHI

Similar Messages

Maybe you are looking for