In tcode F-40 field "Due on" is not getting displayed.

Dear Friends,
While making the payment entry through t.code F-40 and using the posting key 39 with special GL indicator " R" the Layout which occurs in which "Due on" field is not appearing please let me know from where we can display the field "Due on".
We have already cheked the following field status.
1. Posting Key and special GL indicatior field status (t.code OB41, OBXT, OBYR and FBKP)
2. Document type field status.
3. GL field status.
None of the above field status controls field "Due on" in F-40 t.code.
Regards
Rahul Jain

Hi Rahul,
You can't change the Due on field to display for F-40 Transacton code. because of this mandatory fields for
Program (screen)     SAPMF05A
Screen number        122
I tryed but not done.
Keep it and post Due date for Retenction  value final date for tracking.
Regards,
Kishore K

Similar Messages

  • Dynamic mandatory field error message is not getting displayed in webui

    Hi,
    In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
    Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
    I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
    Can anybody tell where the problem is?
    Thanks,
    Hari.

    Hi Hari,
    Really sorry do not know how to convert this nug file to text
    How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
    Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
    Thanks,
    Rajesh P

  • Data carrier & application field are not getting displayed in CV04N

    Hi Guru's
    In TCode : CV04N,  data carrier & application field are not getting displayed.
    While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
    Let me know is there any configuration that has been missed out.
    Regards
    Bhanu

    Hi Bhanu,
    Please note that the fields 'Data carrier' & 'Application field'  are visible only if no document type is entered.
    Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
    Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
    Regards,
    Pradeepkumar Haragoldavar

  • Catalog codes not getting displayed in Field- QS41

    During my customisation activity, codes of catalog profiles are not getting displayed in SAP screen. Field for codes are showing as blank grey area in QS41 Tcode. If I try creating same codes again, system throwing error saying "key for entry is exisying already".
    Another observation is in the initial screen of QS41 if I select catalog and codes from folders all codes we can see for selection in initial screen, but same is not getting displayed in field for codes in QS41, its showing blank grey fields. Could anyone tell me what might be reason. Its happening for standard catalog profiles also.
    Could anyone tell me what might be the reason.

    Hello Vineeth,
    could you please apply note [1078292|https://service.sap.com/sap/support/notes/1078292] in your system this should resolve the discribed issue.
    Regards,
    Isabelle

  • Screen fields not getting displayed after Line 16

    Hi All,
    There is a screen exit created in IW51, now the new requirment is to add 3 more fields.  I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

    Hi,
    Can you give me the Enhancement name?
    I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

  • SAP Fields not getting displayed on the BDT screen

    Hello Gurus,
    I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
    1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
    2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
    3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
    4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
    5. Attach the section to the Subclaim Overview Screen.
    6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
    Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
    Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
    Reagrds,
    Shiva

    Hi Shiva,
    did you create your own Z BDT application? Is it set to be active?
    I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
    Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
    Regards,
    Frank
    Message was edited by: Frank Vieregge

  • Fields not getting displayed in Sapscript

    Hi Guyz,
    I have a customized Sapscript form ZPV_INVOICE and its print program RVADIN01. This form outputs the Sales Invoice. When the print preview is triggered, Material number (MATNR) is not getting displayed on the form. However, when the form is debugged, MATNR values are properly fetched and showed (while debugging only, not in output).
    Can somebody please let me know the reason, why the MATNR is not getting displayed on the output, even though it is showing values while debugging.
    Thanks in advance !

    Hi ,
    Then check matnr  field which is display  is same  what you are checking  in debugging  .
    COnfirm  the field   and check whether data stays till end of module   .
    regards
    Deepak.

  • Quantity field not getting displayed

    Hi,
    I am using Adaptived RFC Model to get Sales Order Data from SAP. The Sales Order BAPI that i am using is
    BAPI_SALESORDER_DETAIL. I have mapped the SALESORDER table(SALESOPRDER Model node) to the TABLE UI element in my WebDynpro Application.
    The problem i am facing is that while all the fields get displayed the Quantity value is not getting displayed in the appropriate column. I have checked the mapping and everything seems to be fine.
    Also when i create a separate value node for the table and fill the value node from the model node the quantity value gets displayed then.
    Please suggest what can be the possible cause for this.
    Regards
    Sidharth
    Can you please

    Hi,
    As far as I understand you display output parameters of BAPI, so check to following things:
    1. After calling BAPI model method call invalidate on context node to update the values (e.g. outputNode.invalidaet() )
    2. Check that you dispaly output parameters and not input parameters of the table. (e.g. You have Quantity and QuantityOutput node so connect you table field to QuantityOutput)
    Hope it helps.
    Victor.

  • Enhanced Datasource fields not getting displayed in Transformation

    Hi,
         Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
      Eg I have done mapping of 6 fields in transformation from datasource to DSO
    Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
    I am deleting the existing transformation.Is this the only solution?
    Kindly suggest your answers.
    Thanks,
    Sonu.

    HI,
    Deleting is not solution as it is common scnerio.
    Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
    Thanks
    Ajeet

  • PR Release Strategy tab processor field is not getting displayed

    Hi Experts,
    While creating Purchase Requisition, In the Release Strategy tab processor field is not getting displayed which should be showing the name of the user id which has been configured in the SPRO.
    SPRO--> Rel Proc for PR > Rel Group> Rel Code--> Object type (US) and --> Agent (User id who has to approve the PR).
    release strategy - Release code  -work flow 1
    That processer name is not displaying
    Thanks
    chandoo

    This is the workflow forum.

  • KINAK field in Table KONV not getting updated with value W

    Hi,
    I have a PO where I am deleting a line item.
    After I delet line item the field KINAK in table KONV gets updated with value W.
    But I am getting instance where in some cases the field KINAK is not getting updated.
    The result is deleted line item is getting populated in PO output also.
    Regards
    Nandiini

    KINAK is updated only when a Condition is inactive ! So when a item is deleted the condition becomes inactive and gets updated with 'W' which means statistical(not to be counted)
    A     Condition exclusion item
    K     Inactive due to calculation basis/shipping material type
    L     Condition exclusion header or inactive at header level
    M     Inactive due to manual entry
    T     Inactive at header level
    W     The document item is statistical
    X     Inactive via formulae of incorrect
    X     Inactive via formulae of incorrect
    Y     Inactive because of subsequent price

  • Time From field is not getting displayed in correct format in Activities

    Hello Experts ,
    We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of  getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
    Can any one suggest how to display in correct format ?
    Regards
    Vinayak

    Hi,
    Its an SAP Product error.
    Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
    - Bobby

  • Quantity fields not getting displayed in the second total row

    Hi,
    As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
    The second total row will have different values based on a formula.
    Please help me out in resolving the issue.
    Thanks,
    Abhishek

    You can provide first row as the SUBTOTAL and next row as the TOTAL.
    Get one extra column on which you can do the SUBTOTAL.
    Regards,
    Naimesh Patel

  • Custom field's text not getting displayed in standard report

    Hi All,
    I have a requirement like this .
    There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
    The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
    For example if the field is ' matnr'  then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
    Please suggest me on this.
    Thanks,
    Sumit

    In transaction GRR2
    Insert->
    selection parameters ->
    take the variable type as >Tesxt varaible for selection parameter
    chosse >material no.
    hope ths helps
    Bhanu

  • Adobe field values not getting displayed in UWL workitem

    Hi,
    We filled a ISR Adobe form and submitted it and generated the corresponding notification number.
    On clickng the 'display and print form', the form is gettin displayed properly.
    But on checking the form at the approvers UWL, the field values are not getting properly filled.
    The form is getting properly displayed at R/3  through IQS22 and also the data values are properly attached to the notification number( checked through ISR_PROCESS_EVENT ).
    Kindly help.
    Thanks and Regards,
    Anto.

    Thanks for publishing your own solution!
    Cheers,
    Noë

Maybe you are looking for