In terms of performance. Which adapter works better ? ADC-VGA or DVI -VGA

Or are parameters different ? Presently my CRT 20" Sony requires an adapter
for my G4. My graphics card suggest that I can add another monitor. It will be a LCD with DVI output. Is the performance better from the ADC-VGA option for the CRT ?
Thanks

ADC is a digital output so you will get the best performance from a digital panel LCD. An adapter will always costs a little on performance, but if you go VGA you lose quality by default in some area.

Similar Messages

Which one works better?

Does Sims 3 work better on a 15" mbp with lion or mountain lion. And also which one works better with a 13" mbp?

I just got off the phone with tech support regarding my E1200 also. They were basically no help at all and I got frustrated with them doing the lets perform two hundred steps to prove you are not a blooming idiot first and that our product is not at fault. I repeatedly stated that I am a computer consultant and ruled out all the easy stuff already. I have thirty years of experience . But still they proceed with ruling out the idiot possibilities for a good thirty minutes until I decide to end the ever growing worthless conversation.
I would suggest you try to reflash the firmware using the TFTP utility.
If that doesn't work, return the product to the store.
DonB2

HT4341 which adapter works in Chile? Argentina?

which adapter works in Chile? Argentina?

All you might need is a plug adapter, you don't need a converter, but I believe that Colombia uses the same plug system as the US

Which adapter do I use for my DVI and RGB only inputs Monitor?

My Samsung monitor only has RGB and DVI inputs. I can't figure out which adapter from Apple to buy since I'm new in the Mac world and not sure of the limited port options I have.
Thanks.

You don't say which Air you have.
Provided yours is one with a Mini-Displayport or Thunderbolt, this should do the job.
http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter

In terms of performance which is better?

Hi I have a query ...
I have table t1 which has 1.5 million records .
now ,
which will be a better option ?
Pls note I need to do it at run time from a procedure.
create procedure p1
is
begin
execute immediate 'create table tidup nologging parallel as select * from t1';
end;
Or having the structure and do inserts in append mode ?
say ,
create procedure p1
is
begin
insert /*+append*/ into tidup select * from t1;
Commit;
end;
I knew that a DDL is far faster than a DML .
Kindly let me know if I am correct or is inserting in append mode is faster ?
Regards
SHUBH

Hi I have a query ...
have table t1 which has 1.5 million records .
now ,
which will be a better option ?The one that runs the fastest, obviously.
Pls note I need to do it at run time from a
procedure.
create procedure p1
is
begin
execute immediate 'create table tidup
nologging parallel as select * from t1';
nd;Creating tables at runtime is a bad idea. If you need temporary tables, use Global Temporary Tables.
Or having the structure and do inserts in append mode
say ,
create procedure p1
is
begin
insert /*+append*/ into tidup select * from
t1;
Commit;This would be better than the first option in terms of sensible coding.
I knew that a DDL is far faster than a DML .Oh really? Kindly provide proof of this.
Kindly let me know if I am correct or is inserting in
append mode is faster ?Logically think about it.
1 = Create Table and Insert Records
2 = Insert Records
Which do you think may take a smidgen longer to perform?

Query on Performance (Which Select is better)

Hi All,
Database Version: 11.2.0.3.0
SELECT CSU.LOCATION ship_to_number,
                   (SELECT location
                      FROM seacds.hz_cust_site_uses_all_nv
                     WHERE SITE_USE_ID = CSU.BILL_TO_SITE_USE_ID
                       AND SITE_USE_CODE = 'BILL_TO'
                       AND CSU.STATUS = 'A') bill_to_num,
                   flv.lookup_code Corp_Code,
                   (SELECT cust_type
                      FROM seagrs.seagrs_customer_profile
                     WHERE ship_to_num = csu.location) customer_type,
                   p.party_name customer_name,
                   l.address1 address,
                   l.city city,
                   L.STATE STATE,
                   l.country country,
                   csu.location ship_to_num
     FROM seacds.hz_cust_site_uses_all_nv csu,
          seacds.hz_party_sites_nv         ps,
          seacds.hz_parties_nv             p,
          seacds.hz_cust_acct_sites_all_nv cas,
          seacds.hz_locations_nv           l,
          seacds.fnd_lookup_values_nv      flv
    WHERE csu.site_use_code = 'SHIP_TO'
      AND csu.status = 'A'
      AND ps.party_site_id = cas.party_site_id
      AND cas.cust_acct_site_id = csu.cust_acct_site_id
      AND flv.description = p.party_name
      AND csu.location = '44408001'
      AND PS.STATUS = 'A'
      AND ps.location_id = l.location_id
      and ps.party_id = p.party_id
      AND csu.org_id in (SELECT org.operating_unit
                           from seacds.mtl_parameters_nv              mpn,
                                seacds.org_organization_definition_jv org
                          WHERE mpn.organization_id = org.organization_id
                            AND mpn.organization_code in
                                (SELECT erp_org_code
                                   FROM seagrs.seagrs_rtn_location
                                  where rtn_loc_type = 'DC'));
Select P.Party_Number, Lvn.Lookup_Code, Lcsu.location
    From Seacds.Hz_Cust_Site_Uses_All_Nv Csu,
         seacds.hz_cust_site_uses_all_nv Lcsu,
         seacds.hz_party_sites_nv         ps,
         seacds.hz_parties_nv             p,
         Seacds.Hz_Cust_Acct_Sites_All_Nv Cas,
         Seacds.Hz_Locations_Nv           L,
         seacds.fnd_lookup_values_nv      LVN
   WHERE csu.site_use_code = 'SHIP_TO'
     AND csu.status = 'A'
     AND ps.party_site_id = cas.party_site_id
     And Cas.Cust_Acct_Site_Id = Csu.Cust_Acct_Site_Id
     And Csu.Location = '44408001'--p_ship_to_num_in
     and ps.status = 'A'
     AND ps.location_id = l.location_id
     And Ps.Party_Id = P.Party_Id
     AND Lvn.Lookup_Type = 'SEAOE_CORP_CODES'
     And Lvn.Description = P.Party_Name
     And Lcsu.Site_Use_Id = Csu.Bill_To_Site_Use_Id
     And Lcsu.Site_Use_Code = 'BILL_TO'
     AND csu.org_id = (SELECT org.operating_unit
                           from seacds.mtl_parameters_nv              mpn,
                                seacds.org_organization_definition_jv org
                          WHERE mpn.organization_id = org.organization_id
                            AND mpn.organization_code in
                                (SELECT erp_org_code
                                   From Seagrs.Seagrs_Rtn_Location
                                  Where Rtn_Loc_Type = 'DC'In the above two queries the first one is taking 1.2 seconds and the second one is taking 2 seconds, i hope the way the second one is written is an optimized way, but why it takes more time.
Thanks and Regards
Srinivas

Hi Karthik,
Agreed, will perform the SQL trace, but as of now Database is brought down for maintenance. Will get back once it's up. As you have mentioned the difference is negligible, but wish to know which was the appropriate way of selecting the records out of the two. I will perform SQL Trace and get back. Thanks for your response.
Thanks and Regards
Srinivas

To verify all the values are properly transferred from source db to target db which command works better?

Hi,
i need to validate all the source values are transferred properly from source db to target db .but i confused which is the right command to use between except & exists.
if 100 records in source then i need to validate all the 100 records should be there in target db.
i used below queries:
using exists:
Select upc_desc from DBO.MIC_TARGET
t1
where not exists
Select 1 from produ_stg
where DESCRi3= t1.UPc_desc
using except:
SELECT descri3 from produ_stg
except
select Upc_desc from MIC_Target.
please help me which query is correct to validate source and target db values are same replica.
Regards,
Jagadeesh

You can use EXCEPT here.
NULL will not consider in NOT EXISTS whereas EXCEPT takes care of the same.(Except is nothing but Distinct and then Not exists)

Adapter micro HDMI to VGA for Nokia Lumia 2520

could someone tell me which adapter micro HDMI to VGA is suitable for Nokia Lumia 2520 please?

Hi, melpa. Welcome to our community. There's no particular brand, but it should be HDMI-D. You may try checking the stores near your place for the price and availability.

Code comparission which is better in terms of performance

In my pl/sql procedure the following code exist
SELECT count(*) INTO L_exists
          FROM txt
     WHERE templ_id in (ISecurTempl,ESecurTempl);
Now i want to replace the query with
SELECT count(*) INTO L_exists
          FROM txt
WHERE templ_id in (                                                       SELECT INT_SEC_TMP FROM table(cast(parse_table as sec_template_tbl))
                                                  UNION
SELECT EXT_SEC_TMP FROM table(cast(parse_table as sec_template_tbl))
Can you please tell me which part of code is better in terms of performance
and why?
Thanks in advance

I want to know which is betterThere's not enough information for anyone here to be able to tell you.
Obviously the first one "looks" faster, but without knowing the tables, structure, data, indexes, platform etc. etc. etc. we won't have a clue.

Which will be better working in ATG CSC or Endeca Search?

Hi All,
I am fresher. currently working on CSC module of ATG.
Which will be better working in ATG CSC or Endeca Search?
Could you please help me?
Thanks & Best regards,
Dilroz

As mentioned by Gopi, CSC and Endeca are different products. Currently ATG CSC doesn't come integrated with Endeca search, and uses its own atg search functionality. Regarding the ATG CSC, search, u can get complete information in ATG documentation.
You can get complete understanding of the Endeca and its integration benefits with ATG ecommerce in the below presentation
http://www.oracle.com/us/corporate/acquisitions/endeca/general-presentation-517133.pdf
HTH
Thanks,
Rajesh Akavaram

HT204023 which works better - bluetooth or wifi hotspot on iPhone 5?

which works better - bluetooth or wifi hotspot on iPhone 5?

The problem magically solved itself by an accidental drop of my phone on the floor. Maybe you should not try this at home

I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

Please help! I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

I don't see any DDR3L on the page for the RAM that would fit your model -> http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM.
But the answer is that it doesn't really matter - just make certain to get 1333MHz.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer. How can I get my new Imac to read these dvd's? Will the mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with the Mac? Do I need anything else to get the dvd material onto my mac? Thanks!!

No DV port in camcorder. Just a yellow AV port/hole. I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's. Can I use this with a Mac? Could I connect a dvd player to the Canopus and transfer the disks onto my Mac? Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way? Thanks again!

Which method is better to the performance?

Using SQLs at front side or using stored procedures at back side, which method is better to the performance?

jetq wrote:
In my view, it maybe have other difference, for example,
Using stored procedure, you don't need to recompile the script every time to be executed,
and use the existing execute plan.what if first time procedure is called after DB start?
PL/SQL does not have EXPLAIN PLAN; only SQL does.
But using SQL statement from application layer may be different.different than what exactly.
SQL is SQL & can only be executed by SQL Engine inside the DB.
SQL statement does not know or care about how it got to the DB.
DB does not know or care from where SQL originated.

Which version of Galaxy S6 works better with At&t G920I or G920F?

Which version of Galaxy S6 works better with At&t G920I or G920F? I heard that the bands are way different so before purchasing anything I will like to hear if there is anyone having already an unlocked galaxy s6 working properly with At&t?

Thanks GLIMMERMAN76 The reason why I asked its because I order this: http://www.bhphotovideo.com/c/product/1136399-REG/samsung_g920i_32gb_black_galaxy_s6_sm_g920i_32gb.html And I had several issues with the signal where on my previous iPhone 5 I was getting speeds of 35mbps on the G920i I was getting 5 to 7 mbps I called At&t customer support told me that they could not register my devices on their network because the imei was not supported or something like that so I contact the store where I order this and return it since it was not working for me (because of the LTE speeds) Now Im concerned and want to order the right model this time. What are your download speeds? where they able to register your devices in the At&t network? -Thank you.

In terms of performance. Which adapter works better ? ADC-VGA or DVI -VGA

Similar Messages

Maybe you are looking for