In the case I've deleted a clip in the tim line it's also deleted in the clip window
I'm just starting with FCP and I've a problem concernig deleting a clip in the time-line. What is the correct way to delete it only in the time line?
Thx a lot for your help
You've opened the in the timeline, instead of in a Project, so when you delete it, it's lost from the browser.
You can delete clips from a project without deleting them from the Browser. To create a project, use the film canister icon at the bottom left of your screen.
Andy
Similar Messages
-
Every cut I make in the sequence window leaves one remaining frame from its deleted neighbor clip. How do I turn off this feature - It is driving me mad.
Here are 3 pictures detailing what I'm experiencing.
Picture 1; clip 1 tail frame.
Picture 2; clip 2 head frame.
Picture 3; clip 2 head frame is now tail frame of clip 1.
does this help describe what is happening? Basically every cut I make
leaves an unwanted frame as a ghost of the missing cut.
best,
Fred
On Wed, Dec 10, 2014 at 4:50 PM, Kevin Monahan <[email protected]> -
How to reclaim spare space back at the end of my clips on the time line
When I have edited stuff on the time line I find that through moving clips around that I have an empty space after my collection of clips that I have arranged. How do I reclaim that empty space back so that where my clips end so does the time line.
I have tried saving the project and reopening it but this does not seem to do anything as I still have the space left.
Any help would be gratefully received Thanx ahead of time.Control click on the empty space and, on the drop down menu, click on Convert Empty Space to Clip. Then, delete the clip you just created.
If the empty space is at the end of your movie, you can do the same as above. But, if your playhead still continues moving past the end of the movie, then expand your time line as wide as possible and check down your time line for little bits of clips left over from editing, and delete those. Any audio that extends past your video clips at the end of the movie should be trimmed back as well, even if you have muted them. -
Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
ThanksI tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved! -
I'm unable to drag-and-drop a script from the Story window in Premiere Pro to a clip
I have a film script visible in the Story window, and I try to drag it to the relevant clip in the Premiere Pro project window—but nothing happens.
I have also tried to attach an astx file, but I get the "matching scene number not found" error, even though I put scene number 1 in the clip and in the astx.
What am I doing wrong?
Incidentally, though your help indicates that "all the scripts" you have in Story will be visible in the Story Windows in Premiere Pro, I can see only the film scripts—not for instance the multicolumn scripts I also have. Is there something I can do about this?
Thanks you,
PIerre SauvageHi,
Please make sure that you are performig drag drop with scenes and not complete scripts. You will notice a cursor change when you do so. For more clarification, please refer to this post. 'http://forums.adobe.com/message/5533247#5533247'.
Importing astx is a much longer way to go through the same thing , so i would suggest to try out the drag drop workflow only and let me know in case you still face issues with it.
Also, yes, column scripts wont be visible to you in the Story panel inside Premiere. For this, I am afraid you will have to convert your column scripts into a film script. Let me know if you need help with this.
Hope this helps.
Thanks
Rashi -
On the moment that I transfer a scene from the monitor window to the timeline, my audio disapears. In the monitor window the sound is playing well. How can I solve this problem ?
gertdd
Please explain.
You cannot move a clip from the Edit area monitor to the Timeline. When you write "monitor window", are you referring to the Preview Window that opens when you double click a file's thumbnail in Project Assets?
If that is the case, are you waiting for the audio imported to Project Assets to conform fully before you start to work with the import? See bottom right of Expert workspace and the appearance of a progress bar. See any conforming going on there?
Do you get sound for your clip if you drag it from Project Assets to the Timeline Video Track 1/Audio Track 1 rather than if you drag a trim from the Preview Window to the Timeline (as it appears you are doing).
Please review and consider, and then let me know if I have misinterpreted any of your problem description.
The answers will be in the details.
We will be watching for those details to help us help you.
Thank you.
ATR -
How can I adjust the clip speed in the editing window of Premiere Elements 11?
In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
So, is this function really gone? I couldn't emagine why! Or how is this done now?
Couldn't find any post or video, explaning how to do that now.
No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
Thanks in advance!SG
An interesting point that you point out
"However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
I am assuming that you are referring to an earlier version of Premiere Elements, having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
ATR -
Getting the audio back on a video clip in the time line
hi all,
and happy new year!
have deleted the audio from a video clip in the time line and now want it back, how would I get the audio back?
thanks for your time
jonyfozPut the playhead at the beginning of the clip and press the X key. It should mark in and out point for the clip. Press the F key to match frame back to the same clip. Make sure both video and audio target tracks are set correctly and press F0 to overwrite and edit the clip with audio back into the timeline.
-
I'm working on a movie in FCP and using cutaways and titles in many places in the timeline. While working on a movie 2 days ago, and I don't know what I did, all the cutaways and titles are now linked to the movie clips from below rather than above. When I "grab" them and drag them up to the top-side, as soon as I "release", they go back down. Along the menu bar, I've check the "view", "modify", "clips", etc., looking for any thing that might refer to appearance of the time line. What must I do to get the cutaways and titles back on top where they belong? The audio clips remained properly-linked to the time line and play properly. The cutaways and titles can be seen but do not play.
The cutaways and titles should be linked above the timeline clips, not below
-
After loading on a link to KnightNews, all of the header stuff disappeared - Firefox box, minimize button, delete button, and the only way to get out of the KnightNews was control-alt-delete. I now find that any time i use Firefox, I have the same problem. I have deleted the program, reinstalled it, done a system restore, all to no avail. When I click on Firefox to open it, the full window appears briefly, then the whole screen is filled with the opening Firefox page. Clicking on a program in the history box brings it up, but it's the same scenario - control-alt-delete is the only way to get out. I also was not able to open the Troubleshooting Information which was listed below on this page.
'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
Or it might be caused by Hardware Acceleration.
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do?
Many apple phone users are especially fed up with RSGI Communication , Erandwana, Pune, Maharashtra, India.
Their service report No. 36679.
Allthough Mr Punit ( Technical Dept. Apple.) had requested RSGI to chance the device, still RSGI said they do not have the device ( I phone 5, white ,16GB) in stock.
Today when we contacted them they said they won't be able to replace OR order to Apple unless and until we do not keep the device with them for 3 days.
Mr Deepak of Technical Dept Apple was contacted who's telephonic Transript as proof is available with us.Who exactly are you addressing your screed to
There are no Apple Staff on this forum ,it is User to User -
I'm using a macbook pro (late 2013 with mavericks-10.9.4 ). I installed windows using bootcamp but didn't estimate the storage I required correctly. So now I don't have enough storage in the bootcamp hard drive.
How can I increase the Partition size between windows and mac without having to delete or re-install windows?
Thanks,
AdvekCheck out this explanation.
-
has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time
In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD -
I have Win7 Pro X64 with Core i7 and 32GB RAM...
When I'm editing and doing other things, adding FX etc, the program works fine BUT when I do ANYTHING in the Program Window i.e. renaming clips, moving clips, etc the program acts as if it's bogged down... I can't for the life of me figure this one out...
I don't have a large number of clips/footage items
I've cleaned the cache
What else could be causing this? When I say slow, I mean a good 10 seconds before the program responds to anything I've done, and when renaming clips, I always have to do it twice because the first time it doesn't "take"
Thanks all for any help!
AzaIt occurs with or without clips in a sequence... the problem isn't the sequences, the problem ONLY occurs in the Project Panel, every other panel is as fast as my machine will allow (very fast) only the PROJECT Panel is EXTREMELY slow when moving clips into folders, etc
ALSO, all my drives and preferences are set up the same in every project, only THIS project is moving slowly... I even divided the project up into 4 separate projects to cut down on the number of clips in each project, and it still moves slow... almost as if something has carried over to each project, or something -
All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?
Hi
I haven't even touched anything that I know of?
And You've not moved or emptied any folder on Your Hard Disk named
• iMovie Event's - or -
• iMovie Project's
Or - disconnected any external hard disk/s
As one CAN NOT move the Event's or Project's on / via DeskTop/Finder - AS iMovie then loses the connection to them. Moving them - MUST BE DONE - within iMovie application - to work OK.
So if You by meaning or accident moved it/them - Move them back - and iMovie might work again.
ELSE - If You are 100% sure that You didn't move them then
• Trash iMovie Pref and Cache files
• Run Repair Permissions - Disk Util tool
• Run Repair Hard Disk - Disk Util tool - BUT YOU MUST Start-Up Your Mac from DVD or External HD to do this
and may be all will work OK again
Yours Bengt W
Maybe you are looking for
-
Hi, My Problem in MIRO regarding CIN and VAT. At the time of Creating Purchase order i dont no the Price of the material eventhough this Excise pass on case(Dealer Purchase) 1)MIGO i will just capture excise (Material account Debit 100Rs and Gr/Ir Cr
-
How do I synch a new magic mouse
My old magic mouse died and I just bought a new one; how can I synch it? This instructions say I have to navigate to the menu, but without a mouse how can I do that? I'm attempting to do this without borrowing someone elses mouse.
-
Oracle Synonym is not available in IDT 4.1
Hello Friends, I am working on a universe using IDT 4.1. I have created a db connection (based on Oracle 11g -> Oracle Client driver) and have used SSO authentication which is working fine. I see the list of tables and views under a schema but public
-
HT1849 what can i do if there's a song thats not playing it properly after purchased
the song i purchased on itunes was not playing properly as it suppose to. so is there any way i can fix that?
-
HTML BANNER in screen custom container..
Can someone please give me simple example code or steps to add an HTML banner into a custom container??