In the Create tutorial, the Text object I created is not shown as a sub-element of the roundrect in

The tutorial shows it like this
but what I get is this

I have redone this several times and it works fine. Can you do screen shots of your steps or a video?

Similar Messages

Anyconnect created profile not shown in connection list, especially the wireless profiles.

Dears,
Kindly advise as we encounter anyConnect issue, when creating profile for using with ISE, the new created profile is not shown in the connection list.
I’m using profile editor to create profile for EAP-Fast, the issue is that the profile that was created not shown in the connection list.
i put the xml file in the correct location
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles
in windows 7.
it is shown in saved networks but not shown in the connection list.
we tried profile editor version 4 but the same issue still exist.

Hi,
Test the System Connector Type in the Portal.
Connector should be any one of the Types :JDBC, ODBO, XMLA, OLAP then only the BI systems will be appear in the BI integartion wizard,
Govindu

Inspection Lot Created but not shown in QE72, and cannot input result or UD

Hi Exports,
I have Inspection Lot Created by 04-production goods receive, but not shown in QE72, and cannot input result or UD
Inspection Lot status: CRTD CHCR SPRQ,
in Business Process of inspection lot showing:
*Cancel inspection lot
Assign RMA proc. to insp. lot
Assign notification to lot RMA
Batch log indicator required
Certificate missing
Change inspection lot
Change planned lot quantity
Choose task list for insp. lot
Confirm Receipt of Certificate
Create part. lot for insp. lot
Flag cancellation
Inventory posting required
Lock
Lot for process documentation
Lot reset allowed
What is going wrong?
BTW, the sampling procedure in Inspection Plan is a read-only field, but empty inside.
Daniel

Dear in your case there is no Inspection plan was attached to the lot so attach the plan and make lot status to REL then only you can do Results Recording.
Inspection plan gets auto assigned to availble inspection plan on respective date if you enabled the inspction with tasklist and automatic assignment boxes in relevant inspection types in MM QM view for this Inspction plant should be made avaialble in stsyem before any lot created which can be created QP01.
If it is not getting assiged automatically then you can assign it manually by QA02 here go to inspection specification tab click on Task list assignment the go to sample tab and click on sample and SAVE Inspection plan will be attached to inspection plan.
Once inspection plan is the lot status you can see REL before assignment of a plant it would be CRTD.
Cheers
KK

Med Rec medrec tutorial 10 deployments-- EJB Modules EJB is not shown

This note adds missing steps in the Med Rec (medrec) Tutorial 10
The tutorial shows how to use EJBGEN to generate EJB classes (incl java source) from .ejb files.
Unfortunately it is missing a few key details. These are described below.
Many thanks to Chris Wall for supplying the answers and hints.
Q: The tutorial includes deploying the manually generated physSessionEjb’s. After doing the step that generates the PhysSession*.java files, onefinds that when trying to deploy that there are no class files – nothing has been built. Are the class files supposed to be generated by the ejbgen step?
[Chris] No, EJBGen just generates the local and remote interfaces and descriptors only. An additional step should be added to explain how to build the newly generated EJBs. I believe you are correct in calling “src/physicianEar$ ant –f build.xml build”.
Q: Manually built the class files using ‘ant –f build.xml build’ in the physicianEar src dir – but that failed in the acc.split.dir step with class not found /org/apache/struts/action/ActionForm.
Obviously did not get the struts jars on the classpath. But as much of the build as completed did include creating the class files.
[Chris] Yes, it looks like struts.jar is not in the classpath. Is this the “build.split.dir” or “appc.split.dir” target? In either case, wlcompile and wlappc should recognized all libs in "${app-inf.dest.lib}" and append them to the compile/appc classpath automatically. The libs should have been copied during the “prepare” target. Can you make sure that struts.jar exists in c:/medrec_tutorial/build/physicianEar/APP-INF/lib? If not, re-run the target with verbose: “src/physicianEar$ ant -verbose -f build.xml build”, and make sure that the libs are copied in the “prepare” target.
Q: When doing the deploy step, we get no errors but on the console window and do not see the tutorial_deployment item under DeploymentsàEJB Modules. There is something under Deployments-->Applications --> tutorial_deployment. It appears the deploy failed since there’s nothing under Deployments --> EJB Modules, and what is there is ‘left over’ from deploying the jar (the ear?) that contains the stuff deployed by the deploy step at the start of tutorial 10.
[Chris] Once the build is successful, you must deploy the EAR. This is done by executing : “src/physicianEar$ ant -f build.xml redeploy.physician.ear”. Again, a step that was left out. Yes, you should be looking at Deployments--> Applications--> tutorial_deployment. So, to summarize: generated the local and remote and descriptors for the EJB, compile the EJB and package the EAR, deploy the EAR, and then view the deployment in the console.

This note adds missing steps in the Med Rec (medrec) Tutorial 10
The tutorial shows how to use EJBGEN to generate EJB classes (incl java source) from .ejb files.
Unfortunately it is missing a few key details. These are described below.
Many thanks to Chris Wall for supplying the answers and hints.
Q: The tutorial includes deploying the manually generated physSessionEjb’s. After doing the step that generates the PhysSession*.java files, onefinds that when trying to deploy that there are no class files – nothing has been built. Are the class files supposed to be generated by the ejbgen step?
[Chris] No, EJBGen just generates the local and remote interfaces and descriptors only. An additional step should be added to explain how to build the newly generated EJBs. I believe you are correct in calling “src/physicianEar$ ant –f build.xml build”.
Q: Manually built the class files using ‘ant –f build.xml build’ in the physicianEar src dir – but that failed in the acc.split.dir step with class not found /org/apache/struts/action/ActionForm.
Obviously did not get the struts jars on the classpath. But as much of the build as completed did include creating the class files.
[Chris] Yes, it looks like struts.jar is not in the classpath. Is this the “build.split.dir” or “appc.split.dir” target? In either case, wlcompile and wlappc should recognized all libs in "${app-inf.dest.lib}" and append them to the compile/appc classpath automatically. The libs should have been copied during the “prepare” target. Can you make sure that struts.jar exists in c:/medrec_tutorial/build/physicianEar/APP-INF/lib? If not, re-run the target with verbose: “src/physicianEar$ ant -verbose -f build.xml build”, and make sure that the libs are copied in the “prepare” target.
Q: When doing the deploy step, we get no errors but on the console window and do not see the tutorial_deployment item under DeploymentsàEJB Modules. There is something under Deployments-->Applications --> tutorial_deployment. It appears the deploy failed since there’s nothing under Deployments --> EJB Modules, and what is there is ‘left over’ from deploying the jar (the ear?) that contains the stuff deployed by the deploy step at the start of tutorial 10.
[Chris] Once the build is successful, you must deploy the EAR. This is done by executing : “src/physicianEar$ ant -f build.xml redeploy.physician.ear”. Again, a step that was left out. Yes, you should be looking at Deployments--> Applications--> tutorial_deployment. So, to summarize: generated the local and remote and descriptors for the EJB, compile the EJB and package the EAR, deploy the EAR, and then view the deployment in the console.

Text annotation made in iOS not shown outside adobe app.

I opened a PDF attachment in the adobe reader app from an email message on iOS.
I added text annotations, and also a signature annotation then saved and emailed the document. When I received the email on my other account, I opened the attachment to find that the signature was still visible, however the text notes were not.
When I open the original modified document in the adobe app, all of my notes are still there.
ammended:
I have discovered that if I open the annoted document I received in the adobe app, all notes are visible. the text notes appear to be missing if the dicument is opened in any other app or with the native iOS pdf quick view.
Message was edited by: lee.evans.81

lee.evans.81,
I can say that this is something we've considered and I expect we'll implement in a future release. We've debated for some time on this issue because we've been afraid of the confusion it causes people. People who are more technical will immediately grasp "flatten for sharing". They'll also understand why their comments and forms are suddenly no longer editable by recipients. We've been afraid of confusing those who are less technical and we hate the idea of adding yet another option to the product. That said, we realize that by NOT having this feature, we confuse a number of the same users AND we frustrate those people who understand the issue. Please watch for the feature in a future update =)

Recently created items not shown in finder.

In an effort to replace the invaluable (IMO) recent item canned searches that were on the older Mac OSX finder sidebars, I've changed the settings of the "All My Files" folder to display by "last modified". Only problem is that it doesn't want to show InDesign files or pdfs. The pdfs will show up about 20 minutes after creation, but that's not very helpful if I've just created something I need to email to a client immediately. Granted, I can navigate through the finder windows to the file and drag it into an email, but it's a lot easier just to open the "Today" or "All My Files" folder and see recently created files right there. Is anyone else having this issue?

You don't say how long ago you migrated. If it was very, very recently it may still be indexing. If not you may try reindexing as directed in Spotlight: How to re-index folders or volumes

Text Object - MVKE

Dear All,
I am facing an issue with text determination. Is it possible to create a Text ID say zzz1 for the text object MVKE. If not then where will I find the standard text Id- 0001. Please provide your vital inputs.
Regards
Deepak Joshi

Dear Chidambaran,
I understand that i can find it at sales item level. But as far as i know it is not originating in sales item level.
it has to originate from the material master. In sales item level it is being copied. i want to how can i create a text ID for text object MVKE??
I will explain my question by an example. I can create a text ID for the text object KNVV by selecting the radio button in front of sales and distribution(customer) in VTOXN. what happens as a result is that a text ID gets created in customer master when i go to VD02. The text created in this text ID gets copied to the sales order depending on the text determination settings. Now, i want a similar setting for the Material master i.e. i should be able to create a text in material master and the text should get copied to the sales order from material master. what you have suggested is the settings for the text determination and not the creation of the text ID. I need the source which will get copied to the sales order.
Regards
Deepak

Txt formatting issues with fields in text object

Post Author: David Goldman
CA Forum: General
Hi, complete newbie here. I'm working on my company's estimating form. I was requested to combine fields FCITY FSTATE and FZIP into one line that auto flows any given data. So I used a Text object with field calls to FCITY FSTATE and FZIP. This works very well, however my text is always formated to the way it was entered into the database. ie. if some salesman enters his info with the capslock key on, it shows up in my text object that way, and not in my regular fields. The regular fields are somehow formatting the text to cap the first letter of each word. How can I configure my text object to do this? Thanks

Post Author: SKodidine
CA Forum: General
Format the fields prior to placing them in the text box.
For example,
propercase({table.last_name}) & ', ' & propercase({table.first_name}) & ' ' & propercase({table.middle_name});
Then place the formula in a text box and then right click and check the box next to 'Suppress Embeded Field Blanks'.

Change the font typeface of text object in form Master Page

Dear all,
        I am creating a Adobe Livecycle form with multi-language support. Simply, there is a header title that is a text object in master page. I want that it can be converted to simplified Chinese from English and change its font typeface to “SimSun” when printing begins. I try the following code on its “Initize” event to do this.
Simply, I configure a print flag(Y/N) in form so that it will convert into simplified Chinese and change the font typeface to ‘SimSun’ when the flag is reset to ‘Y’.
Int langInt = i ;
If (pFlag == “Y”) {
           PaymentRequisitionApp.pageSet.Page1.MasterSubform. Text1.value.text.value = l_XML.Record[i].TITLE.toString();
           PaymentRequisitionApp.pageSet.Page1.MasterSubform. Text1.font.typeface ="simsun";
I found that it doesn’t work. There is something else in the form to reset the title to English. So I try to paste the code above in “calculate” event of tex1 object. It’s work!
Question:
1.      Anyone can tell me that the implement order of the events in the form?
2.      Does it exist other better way to do this?
        3. Which event, function or any else let the master page’s object to be reset?

this link for downloading the sample is valid:
http://rapidshare.com/#!download|935|429748707|TEST2.pdf|84.309

I want to display the both Hindi and English font in single text object

hi...
my problem is i want to display both Hindi and English font together in a single text object...
the data is retrieved from Database in detail section...
is there any font which supports both Hindi and English font for single text object...
help me...

hi Vinayak,
If I understand your requirement, your field has full length word.
Now we should split this field into 3 parts.
Please Create 3 formulas.
Part1
stringvar s1;
s1:= left({field}, InStr({field},"("));
s1;
Part2
stringvar s2;
s2:= Mid({field},InStr({field},"(")+1 ,InStr({field},")")- InStr({field},"(") -1);
s2;
Part3
stringvar s3;
s3:= Mid({field}, InStr({field},")"));
s3;
Now Place a Text box in required section. Drag these 3 formula fields into the Text box.
Right Click the Part2 and apply mangal font.
Right Click the Part1, Part 3 and apply Arial font.
I have tried this and implemented successfully. Please let me know if you still face any issue.
Regards,
Vamsee

How can I align a text object by the visible text and NOT by its bounding box?

Illustrator CS4.
I am trying to align some text to the center of the artboard. The bounding box is bigger than the text, so when I try to align it to the artboard it doesn't actually center align the artwork as I need it to. The text is needing to be aligned with another text object, so I can't just center align the text and then align to the artboard (which would eliminate the bounding box problem, I think). To make matters worse, the text I want to align has a stroke.
The only way I know to currently align the text properly is to convert it to outlines. This is what I've done, but I need something better. I want to be able to have my illustrator file that has all editable text and then be able to make a separate identical file with all text converted to outlined paths. The only thing holding me back right now is that I can't get the exact alignment while everything is still as text.

The solution is to simple to believe and probably why you over looked it.
You make two text frames to exactly the height and width of the text. You position the text in the relative location and then group the text frames then center that group on the artboard.
Like such:
If you ever want to add text that should be no problem but you have to re center.

How to drag the end of two text objects at the same time

I have two seperate bits of text in a particular section of video. If I select the two text objects and drag the end left or right it only moves one. I I want to be able to drag the end of multiple things at the same time.
I may be being dumb but cant find how to do it. Any solutions gratefully received.
Best
Tom B.

Two stacked separate title clips or two text text boxes in a single clip?
Russ

Do you know how to change the Text Object for Billing Document?

Hi,
If you execute Transaction VOTX or VOTXn it will take you to Text Determination. The Billing Doc & Sales Document both has the VBBK as Text Object for me and is it like that for all.
I need to change the Text Object to VBRK for Billing Doc, which is the ideal because I am using the Function Module READ_TEXT to retrieve text. This work perfectly for Sales Document which has VBBK as Text Object, but does not work for Billing Doc where it through as error message saying Text 0020000021 ID 0002 language EN not found.
Thank You
Kishan

Hi kishan,
For updating these text you can use FM 'SAVE_TEXT'.
As for your problem, to get the parameter you need, go to the billing document, go to the text, and display it in plain page mode.
Then you do 'GO TO' -> 'HEADER', and a pop-up window open with the parameters you need Obect type, ID, Name, ...
Regards,
Erwan.

In DeskI, what's the maximum for "Limit size of long text objects"? 2000?

In Universe Designer, we have a setting which is "Limit size of long text objects", it can control how many characters can be displayed for long text objects.
The problem is that in DeskI, we can only display 2000 characters even we set 2500 or more in Universe Designer by "Limit size of long text objects". But if we use the same Universe & same Database, WebI can show 2500 or more characters for long text objects.
So does it mean in DeskI the maximum value for "Limit size of long text objects" is 2000?

Hi Jason,
Check that the object in the universe is set to data type "long text".
Also check that the object itself is not limiting the length of the string, as well as that the entire string is actually in the database... the data type here could also be the issue.
Hope this helps
Jacques

How do I save a document without it saving the text/object box outlines?

Is it because I'm using the trial that I can't save a document without it showing the outline of every text/object box? I've not selected all, but that's what the saved document looks like...

You want Pages, not workstations, and you might want to bookmark Lion and MacBook Pro fora.
http://www.apple.com/support/pages/
http://www.apple.com/support/lion/
http://www.apple.com/support/macbookpro/

In the Create tutorial, the Text object I created is not shown as a sub-element of the roundrect in

Similar Messages

Maybe you are looking for