In the filter the value of text variable is not shown, only technical name.

Hi All,
We have some odd behavior of text variables in the filter screen of key-figures.
After entering values in the variable screen, the report is executed.
Within the report all text variables are filled, with the values entered in the variable screen.
I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
Has anyone experience with this behavior or even better a solution to prevent this?
As allways, each usefull answer points assigned!
Regards,
René

Hi Rene,
If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
So best way is to debug your code and check that using code RSRT.
Thanks
Dipika

Similar Messages

Values of Formula Variables are not determined

I have created a Purchase Order for services where the quantities for services line items are determined on the basis of predefined formulas. Values for all the variables are provided in PO and quantity is calculated on the basis of those values. When I try to adopt the services during the creation of Service Entry sheet with reference to PO, system shows the below error message:
Please enter a value for variable(s) NO OF PERSONS (Form.Val.1)
Message no. SE252
Diagnosis
You wish to have the system determine the quantity using a formula but have not entered any values for the variables in the formula.
Procedure
Maintain the values of the variables.
Example
For example, in a formula for calculating a volume, specify the values for the variables "length", "width", and "height".
The values of formula variables are not adopted from the PO. Please suggest the solution or possible cause of error.

I have gone through the note you suggested. But in my case each variable is created with specific name and assigned to the formulas.
The formulas are getting adopted in RFQ but not in service entry sheet.
Edited by: abapuser on Dec 21, 2010 6:46 AM

Not able to get the value of ODI Variable when i pass thru Option

Hi,
I have ODI variable called prev_etl_run_date which will hold the last successful etl run date. I want to use the value of this variable in one of my KM step.
But i don’t want to use directly in my KM. So I passed the variable name thru KM Option.
I intend to use the variable’s value in the KM step, as shown below:
<%=odiRef.getOption("MY_OPTION_1")%>
Here I am expecting the value of the variable, but here I am only getting the variable name only.
Is there any substitution method available in ODI KM , please help me to solve this issue.
Thanks
nidhi

ODI options are not intended for run time parameters. They are like design choices or debugging flags or parameters that can be specified in code template. Previous ETL run time stamp is hardly a design choice.
On the other hand, it is really a bad practice to put a variable inside KM directly. That creates a dependency that you can easily avoid by putting a filter using that variable in the interface.

Can we use the value of a variable in an alert message

I have a variable in forms6i. I want to use the value of this variable in an alert message. How is this possible?

Gul wrote:
I have a variable in forms6i. I want to use the value of this variable in an alert message. How is this possible?Try
DECLARE err_txt VARCHAR2(200) t;
al_id ALERT;
al_button Number;
BEGIN
al_id := FIND_ALERT('My_Error_Alert');
SET_ALERT_PROPERTY(al_id, alert_message_text, 'Hello how are you mr. variable '||:variable_name );
al_button := SHOW_ALERT( al_id );
END; Hope it works..
Hamid

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
     you will be having your first program values in internal table or some variables,
    when you are calling the second program you wii use like this,
    SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
                       WITH s_emp(second program select-options)   IN t_emp(first program variables)
                       WITH p_chk   EQ t_chk
                       WITH p_r1    EQ t_r1
                       WITH p_month EQ t_month
                       WITH s_cust1 IN t_cust1
                       WITH p_r2    EQ t_r2
                       WITH s_cust2 IN t_cust2
                       WITH s_week IN t_week
                       AND RETURN.
you have pas like this to get your first program details.

How to get the value of a variable defined in javascript in JSP

how to get the value of a variable defined in javascript in/through JSP????

In Javascript you can use the DOM to access the input element and set it's value before submitting the form. Then it's value will just be passed.

How to get the value of a variable in FOX?

Hi,
In the FOX program how to get the value of a variable defined in planning area?
can anyone give me some sample code?
thanks

Adding to the last reply,
you can use VARI(variable) to get the count of the values.
In the latest version of BPS, you may also use the following new foreach construct:
FOREACH var IN VARIABLE variable_id.
Regards - Ravi

Change the value of a variable used in a View query

I am using JDeveloper 11g to develop a simple portlet application which displays data loaded from database. I am displaying the data by dragging the ViewObject from the AppModuleDataControl to the View.jspx page and selecting the option ADF Read-only Table. My ViewObject has a single variable :empId. Now is it possible to change the value of this variable with a value that comes from the request object. On the internet I found the following code:
        FacesContext facesContext = FacesContext.getCurrentInstance();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp =
        elFactory.createValueExpression(elContext, "#{data.AppModuleDataControl.dataProvider}",
        Object.class);
        ApplicationModule am = (ApplicationModule)valueExp.getValue(elContext);
        ViewObject emplVO;
        emplVO = am.findViewObject("EmployeeView1");
        emplVO.setNamedWhereClauseParam("empId", "1");I have put this code in the public void processAction(ActionRequest request, ActionResponse response) method. However this does not work when I deploy it.
Does anyone know if the above code is correct in this case and if there is a better way how I can set this up?

Hi there:
Did you add a break point and debug the code to see what is the value for the :empid parameters passed in to your view object?
If you are sure you have passed in the correct value for ":empid" parameter, then do the following:
String amDef = "yourAmDef";
String config = "yourConfig";
ApplicationModule am =
Configuration.createRootApplicationModule(amDef,config);
ViewObject emplVO;
emplVO = am.findViewObject("EmployeeView1");
emplVO.setNamedWhereClauseParam("empId", "1");
empVO.executeQuery();
which will execute your view object with the new bind variable value and refresh the view.
Please mark my answer as 'Correct' if it solves your problem, or 'Helpful' if it does.
Thanks,
Alex
Edited by: Alexbie on 27-Aug-2010 8:52 AM

Can I perform a lookup to verify the value of a variable is contained in another list column?

I am working in Sharepoint Designer and am trying to figure out how I can set a condition in an approval workflow to only complete a task if the value of a variable is contained in another list column. So if I had a list called A with column
A1 and I am working in the approval workflow, I only want the approval to complete if my variable is equal to any value in list A column 1. Otherwise I want to keep the approval task pending. I am very new to sharepoint so any help would be appreciated.
Thank you.

Hi,
You can use the condition "if any value equals value". Please refer below links for reference.
http://office.microsoft.com/en-in/sharepoint-designer-help/workflow-conditions-in-sharepoint-designer-2010-a-quick-reference-guide-HA010376962.aspx
http://www.codeproject.com/Articles/125120/Step-by-Step-Guide-in-Developing-your-own-Workflow
Best Regards,
Pavan Kumar Sapara.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
s p kumar

How to change the value of a variable in new ABAP debugger.

Hi Guys,
I can't change the value of a variable in the new ABAP debugger.. when I change its revert back to old value. but this is not the case with the old version. How to do this..
Cheers
Senthil

Hi,
1. Dobule click in the variable in the variable tab.
2. Click the Change icon in Detail.Dis.
3. enter the new value and press enter
Refer
[http://www.sapdb.info/new-abap-debugger/|http://www.sapdb.info/new-abap-debugger/]
[http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm]
<removed_by_moderator_together_with_points>
Regards,
SB
Edited by: Julius Bussche on Jun 24, 2008 8:21 AM

Probleme changing the value of a variable in movieclip from my scene

Hello,
i have a probleme changing the value of a variable in movieclip from my scene. i explain: I have combobox on my scene containing categories, and in the scene i load an xml file containing links to php files that work with the combobox.
Also on the scene i have a movieclip "filmstrip", inside this movieclip on the first frame i have a script loading the php file selected in the scene . i use a load() function with a variable "theUrl" inside like this : T.load(theUrl);.
In my scene i want to change the value of "theUrl" inside the movieClip filmstrip. I tried filmstrip.theUrl = url; But it doesnt work
the xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<slideshow>
<area title1="10 Last updated" link1="link1.php"/>
<area title1="special" link1="link2.php"/>
</slideshow>
here is the code on my scene:
var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
filmstrip.theUrl=url;//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
filmstrip.theUrl=url; //<<-----HERE
select.addEventListener("change",cbListener);
here is the code inside the movie clip "filmstrip"
var T:XML = new XML();
T.ignoreWhite = true;
T.onLoad = function(xml) {
etc etc etc }
T.load(theUrl);    //<<---HERE it still undefined

YESSSS . Thanks you very much Kglad it wotk i put all in a function inside the filmstrip function Tload(theUrl){etc ect}and in the root i call it like this filmstrip.Tload(theUrl);   and it works
code in the root var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<-----HERE
select.addEventListener("change",cbListener);

Pass the value of a variable in a KM Option

Hi Gurus,
We have developped a LKM using existing DBlinks to extract data. Since we are not allowed to created DBlinks ourselves on the source DBs, we have added an option in the KM to specify the name of the DBlink that should be used.
It worked well because we only had the prod context.
Now we have a Dev and Test context for some dataservers. Our idea was to put a variable DBL_NAME as the option value and refresh it in a package. The dblink name is store in a table with its associate context name and we retrieve the context using the Substitution API : SELECT value from PARAM WHERE param = '<%=odiRef.getContext("CTX_NAME")%>'
As the value of option DBLINK_NAME we put #PROJECT.DBL_NAME.
However at runtime the variable is not resolved so its name appears instead of its value : +... from MIN.DATASTORE@#PROJECT.DBL_NAME DATASTORE where     (1=1)+.
Do you have any idea of the cause of the behavior ?
We are working with ODI 11.1.1.5.
Here is the code of our KM :
create or replace view <%=odiRef.getObjectNameDefaultPSchema("L", "" , "W")%><%=odiRef.getInfo("COLL_NAME")%>
+(+
     +<%=odiRef.getColList("", "[CX_COL_NAME]", ",\n\t", "", "")%>+
+)+
as select     <%=odiRef.getPop("DISTINCT_ROWS")%>
     +<%=odiRef.getColList("", "[EXPRESSION]", ",\n\t", "", "")%>+
+from     <%=odiRef.getSrcTablesList("", "[SCHEMA].[RES_NAME]@"+"odiRef.getOption("DBLINK_NAME")"+" [POP_TAB_ALIAS]", ", ", "")%>+
+where     (1=1)+
+<%=odiRef.getFilter()%>+
+<%=odiRef.getJrnFilter()%>+
+<%=odiRef.getJoin()%>+
+<%=odiRef.getGrpBy()%>+
+<%=odiRef.getHaving()%>+
Thanks in advance for your help.
Regards

Hi Michael,
Thanks a lot for your answer! It could be a workaround.
However sometimes we have a lot of different sources that doesn't need a different dblink for each context and only one source that has 3 different dblinks (one for each context). If I could avoid to create a lot of useless variable, it would be nice.
Does someone know if it is possible to put the value of a variable as a KM option ?
Regards

How I can save the value of a variable in a database?

hello,
how I can save the value of a variable in a database? I need to keep the # of times you press click animation. to know how many times it has been seen.
I connect to msql database, using php, javascript, ajax and jquery, but not how to save the variable counter clicks from adobe edge Animate
appreciate your help so I can connect to the database from adobe edge animate.
thank you very much
Luis Felipe Garcia
[email protected]

Hi, all-
This isn't an Animate-specific issue, but I thought I'd take a stab at it anyway. As with anything else on the web, you need to have a server script to handle incoming data, so it's all back end work. Your page will need to call that script and provide parameters to that script that it can read.
The easiest way I can think of to do this (and this is all highly theoretical, so please make sure it's secure before you implement it) is to create a 1px div that has visibility off. Whenever you click, you can load your URL in that div, which then increments your counter on your db.
Hope that helps inspire some interesting solutions!
-Elaine

Can you change the value of a variable that is reset by a parameter?

Sorry if this is simple but I just crashed a package and can't do an autopsy. I suspect I sent it into an infinite loop. I know you can't change the value of any passed in parameters. What I tried to do was have the parameter set the value of a variable
and then I tried to change the value of the variable. Is that even allowed?
I was trying to do this:
MyCheckVariable = MyParameter (which equals true)
(some cool stuff happens)
MyCheckVariable = False
I hit F5 and my package turned into the Energizer Bunny. Is the way I try to reset the variable the culprit?

This is a prototype so I just created a project parameter and set it to true. In the real world the parameter will be used to control an optional part of the process because on a re-run after error that part doesn't have to be ran again.
So when I say MyCheckVariable = MyParameter (which equals true) in reality what I actually have is in the variables window I'm using an expression and it looks like this in the variables window
name = runDownload
Scope = Package
Data Type = Boolean
Value = True (but greyed out)
Expression = @[$Project::param_runDownload]

Can we change the value of a variable in the driver program from sapscript?

Hello Experts,
I am currently developing a form wherein I need to change the value of a variable defined in the standard
driver program through the sapscript form. Unfortunately, I cannot customize this standard program since this is used by many other
subsidiaries. So, is there anyway that I can change a variable defined in the driver program via sapscript?
I tried to use a PERFORM to change its value but it is not working.
I hope you can help me guys. Thank you and take care!

SAP SCRIPT:
/: PERFORM GET_ATTNDEE_INFO IN PROGRAM ZHR_TRNG
/: USING &PPVAR-EOBJD&
/: CHANGING &ATTND&
/: ENDPERFORM
Executable Prog.:
REPORT ZHR_TRNG.
FORM GET_ATTNDEE_INFO TABLES IN_PAR STRUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA : LOC_CODE(8),
WF_NAME LIKE PA0001-ENAME, "----Location Code
WF_SOBID LIKE HRP1001-SOBID. "----Business Event Code
DATA: BEGIN OF ITAB_ECODE OCCURS 0,
ECODE(8),
END OF ITAB_ECODE.
DATA: NAME1 TYPE STRING.
READ TABLE IN_PAR INDEX 1.
LOC_CODE = IN_PAR-VALUE.
SELECT SOBID FROM HRP1001 INTO WF_SOBID
WHERE OBJID = LOC_CODE AND OTYPE ='E' AND PLVAR = '01' AND SCLAS = 'P'.
APPEND WF_SOBID TO ITAB_ECODE .
ENDSELECT.
IF SY-SUBRC = 0.
LOOP AT ITAB_ECODE.
SELECT SINGLE ENAME FROM PA0001 INTO WF_NAME
WHERE PERNR = ITAB_ECODE-ECODE ." AND ENDDA >= '31.12.9999' .
CONCATENATE 'Mr ' WF_NAME ',' NAME1 INTO NAME1.
IF SY-SUBRC = 0 .
OUT_PAR-NAME = 'ATTND'.
OUT_PAR-VALUE = NAME1.
APPEND OUT_PAR.
ENDIF.
ENDLOOP.
ENDIF.
ENDFORM. "GET_USR_INFO

In the filter the value of text variable is not shown, only technical name.

Similar Messages

Maybe you are looking for